Your browser doesn't support javascript.
loading
Removing methylene blue from water: A study of sorption effectiveness onto nanoparticles-doped activated carbon.
Obayomi, Kehinde Shola; Lau, Sie Yon; Zahir, Abdul; Meunier, Louise; Zhang, Jianhua; Dada, Adewumi Oluwasogo; Rahman, Mohammad Mahmudur.
Afiliação
  • Obayomi KS; Department of Chemical Engineering, Curtin University, CDT 250, 98009, Miri, Sarawak, Malaysia. Electronic address: obayomikehindeshola@gmail.com.
  • Lau SY; Department of Chemical Engineering, Curtin University, CDT 250, 98009, Miri, Sarawak, Malaysia.
  • Zahir A; National Textile Research Centre, National Textile University, Faisalabad, 37610, Pakistan.
  • Meunier L; Department of Chemical Engineering, Queen's University, Kingston, K7L 3N6, Canada.
  • Zhang J; Institute for Sustainable Industries and Liveable Cities, Victoria University, PO Box 14428, Melbourne, 8001, Vic., Australia.
  • Dada AO; Industrial Chemistry Programme, Nanotechnology Laboratory, Department of Physical Sciences, Landmark University, P.M.B.1001, Omu-Aran, Kwara, Nigeria.
  • Rahman MM; Global Centre for Environmental Remediation (GCER), College of Engineering, Science and Environment, The University of Newcastle, Callaghan, NSW, 2308, Australia; Department of General Educational Development, Faculty of Science and Information Technology, Daffodil International University, Ashulia,
Chemosphere ; 313: 137533, 2023 Feb.
Article em En | MEDLINE | ID: mdl-36528163
In this present study, silver (Ag) and titanium dioxide (TiO2) nanoparticles were successfully deposited on coconut shell-derived activated carbon (CSAC), to synthesize a novel nanocomposite (CSAC@AgNPs@TiO2NPs) for the adsorption of Methylene Blue (MB) dye from aqueous solution. The fabricated CSAC@AgNPs@TiO2NPs nanocomposite was analyzed by Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscope (TEM) equipped with Energy Dispersive X-ray spectroscopy (EDS) detector, X-ray Photoelectron Spectroscope (XPS), and Brunauer-Emmett-Teller (BET). The successful deposition of AgNPs and TiO2NPs on CSAC surface was revealed by the TEM/EDX, SEM, and XPS analysis. The mesopore structure of CSAC@AgNPs@TiO2NPs has a BET surface area of 301 m2/g. The batch adsorption studies were conducted and the influence of different parameters, i.e., adsorbent dose, adsorption time, initial dye concentration, pH and temperature were investigated. The nonlinear isotherm and kinetic modelling demonstrated that adsorption data were best fitted by Sips isotherm and pseudo-second-order models, respectively. The maximum adsorption capacity of MB onto CSAC@AgNPs@TiO2NPs by the Sips model was 184 mg/g. Thermodynamic results revealed that the adsorption was endothermic, spontaneous and physical in nature. CSAC@AgNPs@TiO2NPs revealed that MB absorption by CSAC@AgNPs@TiO2NPs was spontaneous and endothermic. The uptake capacity of MB was influenced significantly by the presence of competing ions including, NO3-, HCO3, Ca2+, and Na+. Repeated tests indicated that the CSAC@AgNPs@TiO2NPs can be regenerated and reused six times before being discarded. The primary separation mechanism between MB dye and CSAC@AgNPs@TiO2NPs was the electrostatic interaction. Thus, CSAC@AgNPs@TiO2NPs was an outstanding material, which displayed good applicability in real water with ≥ 97% removal of MB dye.
Assuntos
Palavras-chave

Texto completo: 1 Base de dados: MEDLINE Assunto principal: Poluentes Químicos da Água / Nanopartículas Idioma: En Ano de publicação: 2023 Tipo de documento: Article

Texto completo: 1 Base de dados: MEDLINE Assunto principal: Poluentes Químicos da Água / Nanopartículas Idioma: En Ano de publicação: 2023 Tipo de documento: Article