Equivalence study of extractables from single-use biopharmaceutical manufacturing equipment after X-ray or gamma irradiation.

ABSTRACT

Single-use (SU) devices and assemblies used as manufacturing equipment in the biopharmaceutical industry require comprehensive qualifications. These qualifications include the assessment of compounds released from SU devices in contact with the process fluids, and how these leachable compounds potentially influence process performance, drug product quality, and patient safety. SU suppliers need to provide comprehensive qualification data for several parameters, for both new products and product changes, such as changes in the sterilization process applied to the SU device. The introduction of X-ray irradiation as an alternative to the currently used and established gamma irradiation of SU devices represents a situation where robust data is required to demonstrate equivalency between these two radiation technologies. Here, we present the results of a comprehensive extractables study for three SU components, bags, tubing, and sterilizing grade filters, evaluated after X-ray and gamma-ray irradiation. The selected study conditions were set up to allow a direct comparison of the results from the two sterilization methods, and to allow conclusions to be made on the impact of irradiation type on the polymers and their additives. Orthogonal analytical methods are applied to identify and quantify all organic compounds present. The data package provided here supports risk assessments for application of irradiated SU equipment in biopharmaceutical manufacturing. The formation of reaction products and the fundamental chemical pathways are discussed and found to be independent of the irradiation type. The results demonstrate the equivalency of both irradiation methods for extractables from plastic components used in pharmaceutical and biopharmaceutical manufacturing.