Residential Water Softeners Release Carbon, Consume Chlorine, and Require Remediation after Hydrocarbon Contamination.

ABSTRACT

Water quality impacts of new ion exchange point-of-entry residential softeners and their ability to be decontaminated following hydrocarbon exposure were investigated. During startup, significant amounts of total sulfur (445 ± 815 mg/L) and total organic carbon (937 ± 119 mg/L) were released into the drinking water that flowed through the softeners. Particulate organic carbon was released until the third regeneration cycle, and resin may also have been released. After one week of device use, softeners continued to cause organic carbon levels to be four to five times greater than background levels. Leached materials from the ion-exchange resin contributed to chlorine decay. When resins were exposed to hydrocarbon-contaminated water, they sorbed benzene, toluene, ethylbenzene, and xylenes (BTEX) and then desorbed the contaminants into drinking water during a 15 day flushing decontamination period. On day 15, benzene exceeded the federal drinking water limit for two of the four resins. The aged resin contributed to the greatest chlorine decay rates and sorbed and then retained the least amount of BTEX. Scale and biofilm on the aged resin likely prompted disinfectant reactivity and inhibited BTEX diffusion into the resin. Study results show that softeners exposed to hydrocarbon-contaminated water may need to be repeatedly flushed to remove BTEX contamination or be replaced. Additional work is recommended to better understand softener impacts on drinking water quality.