Atmospheric Gas-Phase Catalyst Etching of SiO2 for Deep Microfabrication Using HF Gas and Patterned Photoresist.

ABSTRACT

Micro/nanoscale structure fabrication is an important process for designing miniaturized devices. Recently, three-dimensional (3D) integrated circuits using SiO2 via-holes interlayer filling by copper have attracted attention to extend the lifetime of Moore's law. However, the fabrication of vertical and smooth-sidewall via-hole structures on SiO2 has not been achieved using the conventional dry etching method due to the limitation of the selective etching ratio of SiO2 and hard mask materials. In this study, we developed a unique method for the deep anisotropic dry etching of SiO2 using atmospheric gas-phase HF and a patterned photoresist. The hydroxyl groups in the photoresist catalyzed the HF gas-phase dry etching of SiO2 at high-temperature conditions. Therefore, fabrication of vertical with smooth-sidewall deep microstructures was demonstrated in the photoresist-covered area on SiO2 at a processing rate of 1.3 µm/min, which is 2-3 times faster than the conventional dry etching method. Additionally, the chemical reaction pathway in the photoresist-covered area on SiO2 with HF gas was revealed via density functional theory (DFT) calculations. This simple and high-speed microfabrication process will expand the commercial application scope of next-generation microfabricated SiO2-based devices.