Measurement of computed tomography modulation transfer function with a novel polymethyl methacrylate phantom.

ABSTRACT

A novel phantom for measuring the 10% and 50% values of the modulation transfer function (MTF) for computed tomography scanners (CT) was investigated. The phantom was constructed by drilling rows of holes of different sizes and frequencies into a small block of polymethyl methacrylate (PMMA). The MTF at a given frequency was determined from the ratio of the range of Hounsfield units within the rows of holes at different frequencies, and the difference in Hounsfield units between air and PMMA. A MTF curve was plotted from measurements at different frequencies and the 10% and 50% MTF values were obtained from a cubic spline interpolation. The MTF results obtained with the drilled hole phantom method were compared to a conventional method - using a thin wire and Spice-CT ImageJ Plugin- and with identical acquisition and reconstruction parameters. The drilled hole phantom measured the 50% MTF with reasonable accuracy but underestimated the 10% MTF by 8.2% on average. MTF measurements were reproducible for repeated image acquisitions and with different users analysing the images, and the phantom was able to accurately measure the change in MTF when measured on images using different reconstruction kernels. The tool may find application as a cheap, easy to use method for routine QC testing of CT scanners.