Prospective evaluation of ultrasound features of magnesium-based bioabsorbable screw resorption in pediatric fractures.

OBJECTIVE: Bioabsorbable magnesium-based alloy screws release gas upon resorption. The resulting findings in the adjacent soft tissues and joints may mimic infection. The aim of the study was to evaluate the ultrasound (US) findings in soft tissues and joints during screw resorption. METHODS: Prospectively acquired US studies from pediatric patients treated with magnesium screws were evaluated for screw head visibility, posterior acoustic shadowing, twinkling artifact, foreign body granuloma, gas (soft tissue, intra-articular), alterations of the skin and subcutaneous fat, perifascial fluid, localized fluid collections, hypervascularization, and joint effusion. RESULTS: Sixty-six US studies of 28 pediatric patients (nfemale = 9, nmale = 19) were included. The mean age of the patients at the time of surgery was 10.84 years; the mean time between surgery and ultrasound was 128.3 days (range = 6-468 days). The screw head and posterior acoustic shadowing were visible in 100% of the studies, twinkling artifact in 6.1%, foreign body granuloma in 92.4%, gas locules in soft tissue in 100% and intra-articular in 18.2%, hyperechogenicity of the subcutaneous fat in 90.9%, cobblestoning of the subcutaneous fat in 24.2%, loss of normal differentiation between the epidermis/dermis and the subcutaneous fat in 57.6%, localized fluid collection in 9.9%, perifascial fluid in 12.1%, hypervascularization in 27.3%, and joint effusion in 18.2%. CONCLUSION: US findings in pediatric patients treated with magnesium screws strongly resemble infection, but are normal findings in the setting of screw resorption. CLINICAL RELEVANCE STATEMENT: Bioabsorbable magnesium-based alloy screws release gas during resorption. The resulting US findings in the adjacent soft tissues and joints in pediatric patients may mimic infection, but are normal findings. KEY POINTS: • Bioabsorbable magnesium-based alloy screws release gas upon resorption. • The resulting ultrasound findings in children's soft tissues and joints closely resemble those of soft tissue infection or osteosynthesis-associated infection. • Be familiar with these ultrasound findings in order to avoid inadvertently misdiagnosing a soft tissue infection or osteosynthesis-associated infection.

Migration of cervical spine screws to the sacral canal: a case report.

Cervical open door laminoplasty is widely used in multilevel decompression, which is a motion-sparing decompression treatment option for multilevel cervical myelopathy. Implant distance migration in cervical laminoplasty has not been reported. A 61-year-old woman underwent cervical laminoplasty, three months postoperatively, she experienced left shoulder pain and left upper limb pain, and underwent cervical magnetic resonance imaging, which showed no abnormalities. She gradually developed dizziness, headache, unstable walking, incomplete urinary incontinence, and fluctuating neck lumps. The X-ray showed that the screws of the C7 lateral mass had disappeared and migrated to the sacral canal. The patient underwent cerebrospinal leakage repair and removal of the screws in the spinal canal. Displacement of fixators implanted into the spinal canal after cervical laminoplasty is a rare complication that can cause permanent neurological injury.

Clinical outcomes of implant- versus abutment-level connection in screw-retained fixed dental prostheses: A 5-year randomized controlled trial.

AIM: The aim of the study was to evaluate the 5 years clinical outcomes associated with implant-level connection (IL) versus abutment-level connection (AL) for implants with an internal conical connection (ICC) supporting a screw-retained fixed partial denture. MATERIALS AND METHODS: Fifty patients with 119 implants were randomly allocated to either the AL or IL group. Radiographic (Marginal bone loss) and clinical outcomes (Bleeding on Probing, probing pocket depth, plaque accumulation, incidence of peri-implantitis and peri-implant mucositis as well as prosthetic complications) were collected and compared at 1, 2, 3, and 5 years. A linear mixed model was used to evaluate the differences between groups. RESULTS: Five years after treatment, the MBL change was not significantly different between the groups at any point. The MBL was 0.23 ± 0.64 mm (AL) and 0.23 ± 0.29 mm (IL). The bleeding on Probing was 44% (AL) and 45% (IL) (p = .89). The mean probing depth was 2.91 ± 1.01 mm (AL) and 3.51 ± 0.67 mm (IL). This difference between the groups was statistically significant but clinical insignificant. Presence of plaque was slightly higher (p = .06) in the IL group (34.4%) compared with the AL group (26.3%). The overall technical, biological, and prosthetic complication rates were similar between groups. None of the implants developed peri-implantitis during the entire follow-up period. CONCLUSION: The results of this clinical trial indicated that all clinical and radiographical parameters were clinically comparable between the study groups.

Anterior Plate-Supported Cannulated Screw Surgery for Ankle Arthrodesis: Clinical and Radiologic Results in Patients with Trauma-Related End-Stage Ankle Osteoarthritis.

BACKGROUND This retrospective study included 31 patients from 2 centers in Türkiye with posttraumatic ankle osteoarthritis treated with anterior tibiotalar arthrodesis using an anterior plate and cannulated screw fixation, with 6 months of follow-up. MATERIAL AND METHODS In this bi-center study, conducted between January 2018 and July 2022, we retrospectively reviewed the digital records of 31 patients with end-stage posttraumatic ankle osteoarthritis who were treated with anterior tibiotalar arthrodesis surgery using 2 or 3 cannulated screws and the anterior plating technique. Data on age, gender, comorbidities, and smoking were recorded, as were operative technique and graft use. Union characteristics, complications, visual analog scale (VAS) results, and Maryland functional scoring were assessed preoperatively and at the 6-month follow-up visit. RESULTS The mean age of the 31 (n=13 male, n=18 female) patients was 55.5 (19-82) years. The union findings were good in 26 (83.9%) of the patients and late in 3 (9.7%) of them. Nonunion was seen in 2 (6.5%) patients. Complications were observed in 7 (22.6%) patients. Union formation was statistically significantly prolonged among the cases with complications (P=0.002). The smoking rate was significantly higher in patients encountering complications (P=0.001). Among cases with complications, the VAS and Maryland scores recorded in the postoperative sixth month were significantly higher (P=0.027, P=0.018, respectively). The mean union time was 13.5±6.5 weeks among all of the patients. CONCLUSIONS Our study showed that cannulated screw fixation, strengthened with the common and easy-to-supply anterior reconstruction plating technique, had high fixation power and good functional results in patients with end-stage posttraumatic ankle osteoarthritis.

Treatment of AVN-Induced Proximal Pole Scaphoid Nonunion Using a Fifth and Fourth Extensor Compartmental Artery as a Vascularized Pedicle Bone Graft: A Retrospective Case Series.

BACKGROUND Scaphoid nonunion (SN) is a challenging condition in wrist pathology, often resulting in severe consequences if left untreated. Surgical intervention, particularly using vascularized bone grafts (VBGs), is a promising but uncertain approach. The 4+5 extensor compartment artery (ECA) pedicled graft, less commonly used for SN, has potential benefits due to its vascular supply and accessibility to the scaphoid. This study aimed to evaluate the effectiveness of the 4+5 ECA pedicled graft combined with headless compression screw fixation in treating avascular necrosis (AVN)-induced proximal pole SN. Radiological results, functional outcomes, and complications related to this method were assessed. MATERIAL AND METHODS This was a retrospective analysis of 19 proximal pole SN cases with AVN treated using the 4+5 ECA-VBG technique from 2016 to 2022. Patients underwent preoperative evaluation and postoperative follow-up for at least 1 year. Data on surgery, demographics, radiological assessments, and functional outcomes were recorded and analyzed statistically. RESULTS All patients achieved radiographic union within 8.5 weeks postoperatively, with revascularization of proximal pole necrosis. Significant improvements in functional outcomes were observed, including pain reduction, increased wrist range of motion, improved grip and pinch strength, and enhanced wrist scores. No major complications were reported. CONCLUSIONS The 4+5 ECA-VBG technique, with headless compression screw fixation, showed high success rates in treating AVN-induced proximal pole SN. This method offers comprehensive restoration of wrist function and minimal complications, making it a viable option for SN management, especially in AVN cases. Further research is needed to confirm these results and establish standardized protocols for SN treatment.

Image fusion-based low-dose CBCT enhancement method for visualizing miniscrew insertion in the infrazygomatic crest.

Digital dental technology covers oral cone-beam computed tomography (CBCT) image processing and low-dose CBCT dental applications. A low-dose CBCT image enhancement method based on image fusion is proposed to address the need for subzygomatic small screw insertion. Specifically, firstly, a sharpening correction module is proposed, where the CBCT image is sharpened to compensate for the loss of details in the underexposed/over-exposed region. Secondly, a visibility restoration module based on type II fuzzy sets is designed, and a contrast enhancement module using curve transformation is designed. In addition to this, we propose a perceptual fusion module that fuses visibility and contrast of oral CBCT images. As a result, the problems of overexposure/underexposure, low visibility, and low contrast that occur in oral CBCT images can be effectively addressed with consistent interpretability. The proposed algorithm was analyzed in comparison experiments with a variety of algorithms, as well as ablation experiments. After analysis, compared with advanced enhancement algorithms, this algorithm achieved excellent results in low-dose CBCT enhancement and effective observation of subzygomatic small screw implantation. Compared with the best performing method, the evaluation metric is 0.07-2 higher on both datasets. The project can be found at: https://github.com/sunpeipei2024/low-dose-CBCT .

Craniovertebral Junction Surgical Approaches: State of Art.

Surgical approaches directed toward craniovertebral junction (CVJ) can be addressed to the ventral, dorsal, and lateral aspects through a variety of 360° surgical corridors Herein, we report features, advantages, and limits of the updated technical support in CVJ surgery in clinical setting and dissection laboratories enriched by our preliminary surgical results of the simultaneous application of O-arm intraoperative neuronavigation and imaging system along with the 3D-4K EX in TOA for the treatment of CVJ pathologies.In the past 4 years, eight patients harboring CVJ compressive pathologies underwent one-step combined anterior neurosurgical decompression and posterior instrumentation and fusion technique with the aid of exoscope and O-arm. In our equipped Cranio-Vertebral Junction Laboratory, we use fresh cadavers (and injected "head and neck" specimens) whose policy, protocols, and logistics have already been elucidated in previous works. Five fresh-frozen adult specimens were dissected adopting an FLA. In these specimens, a TOA was also performed, as well as a neuronavigation-assisted comparison between transoral and transnasal explorable distances.A complete decompression along with stable instrumentation and fusion of the CVJ was accomplished in all the cases at the maximum follow-up (mean: 25.3 months). In two cases, the O-arm navigation allowed the identification of residual compression that was not clearly visible using the microscope alone. In four cases, it was not possible to navigate C1 lateral masses and C2 isthmi due to the angled projection unfitting with the neuronavigation optical system, so misleading the surgeon and strongly suggesting changing surgical strategy intraoperatively. In another case (case 4), it was possible to navigate and perform both C1 lateral masses and C2 isthmi screwing, but the screw placement was suboptimal at the immediate postoperative radiological assessment. In this case, the hardware displacement occurred 2 months later requiring reoperation.

Robotic alignment system Cirq (Brainlab) for navigated brain tumor biopsies in children.

INTRODUCTION: The Cirq robotic alignment system (Brainlab, Munich, Germany) is a manually adjustable electronic arm with a robotic alignment module on its distal end, enabling the neurosurgeon to automatically and accurately align surgical instruments to a preoperatively planned trajectory. In this study, we share our first experiences and results using Cirq for intracranial tumor biopsy in children. METHODS: From May 2021 until October 2022, all consecutive patients that underwent a brain tumor biopsy using Cirq were included and compared to a historical cohort of patients biopsied with the non-robotic system Varioguide (Brainlab, Munich, Germany). Patient-related data, tumor-related data, and surgery-related data were collected. Registration accuracy was calculated for different patient-to-image registration methods. Pre- and postoperative images were fused, and entry error, target error, and angulation error were calculated. RESULTS: Thirty-seven patients, aged 1-19 years, were included (14 with Cirq and 23 with Varioguide). An integrated histopathological and molecular diagnosis was acquired in all cases. Patient-to-image registration was significantly more accurate when based on bone screw fiducials combined with intraoperative CT, as compared to surface matching or skin fiducials. The target error (Euclidian distance) was 5.3 mm for Cirq as compared to 8.3 mm for Varioguide, but this was not statistically significant. Entry error and angulation error were also not significantly different between both groups. CONCLUSION: Intracranial biopsy with the Cirq robotic system is feasible and safe, and its accuracy does not differ from the Varioguide system.

Intraoperative radiographic analysis and adjustment of the optimal position of plate in high tibial osteotomy.

BACKGROUND: When high tibial osteotomy is performed for genu varus deformity, it is not easy to determine the accurate placement of the plate. PURPOSE: To determine a simple way to assess the position of the plate, to provide more effective mechanical support and to reduce the risk of implant rupture and vascular injury. MATERIAL AND METHODS: Two human anatomical marks, the patellar ligament and semimembranosus, were connected and divided into four parts to identify points Ⅰ, Ⅱ, and Ⅲ. These points determined the areas for Tomofix placement: anterior, anterolateral, and lateral. Simulated internal fixation placed hole B of Tomofix at points Ⅰ (anterior), Ⅱ (anterolateral), and Ⅲ (lateral). We analyzed the pointing direction of the locking screws in Tomofix holes on MRI to assess potential injury risk to the popliteal neurovascular bundle. RESULTS: In the X-ray: holes B and C appeared as the plate in the anterior, only hole C appeared as the plate in the anterolateral, and none of the holes appeared as the plate in the lateral. In the general view of the sawbones, the screw pointed towards the popliteal neurovascular bundle when the plate was in the anterior. CONCLUSION: If a small number of holes on the plate is visible under fluoroscopy, then several lateral positions of the plate can be obtained; the direction of the screw tunnel tends to deviate from the popliteal neurovascular bundle with the posterior position of the plate.

Open reduction and C1C3 posterior Harms-Goel fixation for unstable Hangman's fracture: technical note.

Hangman's fracture occurs in the elderly following low kinetic energy fall from their height, or in the young during traffic accident. Classically described as bipedicular C2 fracture, Hangman's fracture results from oblique hyperextension-flexion vector forces which can lead to anterior dislocation of C1C2 complex over C3 vertebral body in case of associated damage to C2C3 disc and ligaments. Even though most cases of Hangman's fracture are not displaced (grade 1) and can be managed with orthopaedic treatment using cervical brace, highly displaced cases of Hangman's fractures (some grade 2, all grade 3) require surgical stabilization. Given the limited capabilities of reduction and the odds for mechanical failure of anterior C2C3 discectomy and fusion, we provide a reproducible method using a specific rod persuader on C1 screws aiming to realign and stabilize displaced cases of Hangman fracture using the C1C3 "Harms-Goel" procedure.

A screw algorithm for congenital C2-3 fusion with high-riding vertebral arteries: feasibilities and clinical outcomes of five different fixation techniques.

OBJECTIVE: To propose a screw algorithm and investigate the anatomical feasibilities and clinical outcomes of five distinct fixation methods for C2-3 fused vertebra with high-ridding vertebral arteries (VA) (HRVA) when the C2 pedicle screw placement is unfeasible. METHODS: Thirty surgical patients with congenital C2-3 fusion, HRVA, and atlantoaxial dislocation (AAD) were included. We designed a algorithm for alternative screw implantation into C2-3 fused vertebrae, including C2 pedicle screw with in-out-in (passing VA groove) technique (in-out-in screw), subfacetal screw, translaminar screw, lateral mass screw, C3 pedicle screw. VA diameter and position, C2 and C3 pedicles, superior facets, fused lamina, and fused lateral mass dimensions were evaluated for screw implantation indication. Implant failure, reduction loss, implant placement accuracy were investigated by computed tomography. RESULTS: A total of 5 VAs were identified as distant VAs; a total of 2 VAs were categorized as occlusive VAs. Sufficient dimension of lateral mass and lamina provided the broadest indications for screw implantation, while the distant or occlusive VA provided the most limited indications for in-out-in screw. The indications of five alternative methods ranged from narrowest to widest as follows: in-out-in screw, C3 pedicle screw, subfacetal screw, translaminar screw, lateral mass screw. The translaminar screws and the lateral mass screws increased the probability of implant failure. All patients who received in-out-in screws, C3 pedicle screws, and subfacetal screws achieved fusion. The accuracy ranged from lowest to highest as follows: C3 pedicle screw, lateral mass screw, in-out-in screw, subfacetal screw, translaminar screw. No translaminar screws deviated. CONCLUSIONS: The algorithm proved to be a valuable tool for screw selection in cases of C2-3 fused vertebrae with HRVAs. The subfacetal screw, boasting broad indications, a high fusion rate, and exceptional accuracy, stood as the primary preferred alternative.

Triangular spinopelvic fixation for U-shaped sacral fractures and tile C pelvic disruptions: counter-nutation (anteflexion and rotation) load-bearing instability requires complementary anterior pelvic ring fixation.

Unstable trauma lesion of the spinopelvic junction, including U-shaped sacral fractures and Tile C pelvic ring disruptions, require surgical stabilization in order to realign the bone arches of the pelvis thus reducing the upcoming orthopaedic impairment during sitting, standing, and walking positions, decompress the nerves roots of the cauda equina in a view of reducing neurological impairment, and allow early weight bearing. Even though posterior open modified triangular spinopelvic fixation is particularly efficient for treating unstable trauma lesions of the spinopelvic junction, it may not be sufficient alone in order to prevent long-term counter-nutation, i.e. rotation and anteflexion deformity of the anterior pelvis under load bearing conditions. Such progressive deformation is caused by either the slight rotation of the iliac connectors within the head of iliac screws for spinopelvic constructs, or the slight rotation of sacral cancellous bone around transsacral screws in case of percutaneous procedure. Regardless of the posterior surgical technique that is used, complementary anterior pelvic fixation appears mandatory in order to prevent such deformation over time, which can lead to pelvic asymmetry and then gait imbalance.

Fluoroscopy guided teardrop technique for open trans-muscular iliac screw placement and open reduction maneuvers during modified triangular spinopelvic fixation for unstable U-shaped sacral and tile C pelvic traumas: technical note.

Unstable traumas of the spinopelvic junction, which include displaced U-shaped sacral fractures (Roy-Camille type 2 and type 3) and Tile C vertical shear pelvic ring disruptions, occur in severe traumas patients following high speed traffic accident or fall from a height. These unstable traumas of the spinopelvic junction jeopardize one's ability to stand and to walk by disrupting the biomechanical arches of the pelvis, and may also cause cauda equina syndrome. Historically, such patients were treated with bed rest and could suffer a life-long burden of orthopedic and neurological disability. Since Schildhauer pioneer work back in 2003, triangular spinopelvic fixation, whether it is performed in a percutaneous fashion or by open reduction and internal fixation, allows to realign bone fragments of the spinopelvic junction and to resume walking within three weeks. Nevertheless, such procedure remains highly technical and it not encountered very often, even for spine surgeons working in high-volume level 1 trauma centers. Hence, this visual technical note aims to provide a few tips to guide less experience surgeons to complete this procedure safely.

A finite element analysis of stress distribution with various directions of intermaxillary fixation using orthodontic mini-implants and elastics following mandibular advancement with a bilateral sagittal split ramus osteotomy.

OBJECTIVE: This finite element analysis (FEA) aimed to assess the stress distribution in the mandible and fixation system with various directions of the intermaxillary fixation (IMF) using mini-implants (MIs) and elastics following mandibular advancement with a bilateral sagittal split ramus osteotomy (BSSRO). MATERIALS AND METHODS: A total of nine mandibular advancement models were set according to the position of the MIs (1.6 mm in diameter, 8 mm in length) and direction of the IMF elastics (1/4 inch, 5 oz). Major and minor principal stresses in the cortical and cancellous bones, von Mises stresses in the fixation system (miniplate and monocortical screws), and bending angles of the miniplate were analysed. RESULTS: Compressive and tensile stress distributions in the mandible and von Mises stress distributions in the fixation system were greater in models with a Class III IMF elastic direction and a higher IMF elastic force than in models with a Class II IMF elastic direction and a lower IMF elastic force. The bending angle of the miniplate was negligible. CONCLUSIONS: Stress distributions in the bone and fixation system varied depending on the direction, amount of force, and position of IMF elastics and MIs. Conclusively, IMF elastics in the Class II direction with minimal load in the area close to the osteotomy site should be recommended.

Comparison of maxillary transversal changes between auxiliary beta-titanium expansion arch and miniscrew-assisted rapid palatal expansion.

OBJECTIVE(S): This study compared buccal bone thickness, dental inclinations and maxillary transverse width dimensions changes between auxiliary beta-titanium expansion arch (AEA) and miniscrew-assisted rapid palatal expansion (MARPE). MATERIALS AND METHODS: The sample consisted of 29 patients, aged between 18 and 40 years, with transverse maxillary deficiency and treated without extractions, divided into two groups: group AEA: comprised 13 individuals (initial mean age: 29.23 ± 9.13 years) treated using auxiliary beta-titanium expansion arch; group MARPE: comprised 16 patients (initial mean age: 24.92 ± 7.60 years) treated with miniscrew-assisted rapid palatal expansion. Buccal bone thickness, dental inclinations and transverse width dimensions (dental, nasal base and jugular) were measured in cone-bean computed tomographies at pre- and post-treatment stages. The variables were compared using the independent t-test. RESULTS: The buccal bone thickness was similar for both groups at the post-treatment stage. The second premolars were significantly more buccal inclined in the AEA group and the right maxillary first molars in the MARPE group. The intercanine and intermolar distances were statistically significantly greater in the MARPE group. Changes in dental arch transverse dimensions were significantly greater for the MARPE group. CONCLUSION: Both treatment protocols corrected the maxillary transverse discrepancy; however, MARPE provided greater correction.

Efficacy of maxillary molar intrusion and quantification of related external apical root resorption - A comparison of two approaches.

OBJECTIVE: This retrospective single-centre study aimed to compare the efficacy of maxillary second molar intrusion with two different approaches, miniscrew-assisted molar intrusion and traditional segmental archwire intrusion, and to compare orthodontically induced external apical root resorption (OIERR) during intrusion between two groups via cone beam computed tomography (CBCT). MATERIALS AND METHODS: A total of 40 adult patients (33.6 ± 10.3 years old) with supraerupted maxillary second molars due to the loss of antagonistic teeth were recruited, with 20 patients in each group. A segmental archwire with adjacent teeth as an anchorage was used in the control group, and 60-100 g of intrusive force was applied by using miniscrews in the experimental group to intrude the overerupted molars. Full-volume CBCT was performed before and after intrusion, and the amount of intrusion and extent of OIERR of the overerupted molars were compared between the two groups. RESULTS: Supraerupted maxillary second molars could be successfully intruded in an average of 5 months. There was more intrusive movement of the buccal and palatal cusps in the mininscrew group than that in the segmental archwire group (P < .05). The intrusive amount of palatal cusp was 3.67 ± 1.13 mm in the miniscrew group and 2.38 ± 0.74 mm in the segmental archwire group. More palatal OIERR was observed in the miniscrew group (30.3 ± 11.6 mm3) than in the segmental archwire group (21.0 ± 8.66 mm3) (P = .0063). There was no significant difference in OIERR between the two groups for mesial and distal buccal roots (P > .05). CONCLUSION: Miniscrews help effectively with supraerupted maxillary second molar intrusion, especially for palatal cusps. There was more OIERR in the palatal root when using miniscrews compared to the segmental archwire approach.

Analysis of duration of different stages of surgery in posterior spinal fusion (PSF) for adolescent idiopathic scoliosis (AIS) patients: comparison between severe versus non-severe AIS.

PURPOSE: Prolonged surgical duration in severe adolescent idiopathic scoliosis (AIS) patients is associated with increased blood loss and perioperative complications. The aim of this study was to compare the duration of each stage of posterior spinal fusion (PSF) in severe AIS (Cobb angle ≥ 90°) with non-severe AIS patients. This analysis will identify the most time-consuming stage of PSF and help surgeons formulate strategies to shorten operative time. METHODS: Retrospective study whereby 90 AIS patients (Lenke type 2, 3, 4, and 6) who underwent PSF from 2019 to 2023 were recruited. Twenty-five severe AIS patients were categorized in Gp1 and 65 non-severe AIS patients in Gp2. Propensity score matching (PSM) with one-to-one with nearest neighbor matching (match tolerance 0.05) was performed. Outcomes measured via operation duration of each stage of surgery, blood loss, number of screws, fusion levels and screw density. RESULTS: Twenty-five patients from each group were matched. Total operative time was significantly higher in Gp1 (168.2 ± 30.8 vs. 133.3 ± 24.0 min, p < 0.001). The lengthiest stage was screw insertion which took 58.5 ± 13.4 min in Gp1 and 44.7 ± 13.7 min in Gp2 (p = 0.001). Screw insertion contributed 39.5% of the overall increased surgical duration in Gp1. Intraoperative blood loss (1022.2 ± 412.5 vs. 714.2 ± 206.7 mL, p = 0.002), number of screws (17.1 ± 1.5 vs. 15.5 ± 1.1, p < 0.001) and fusion level (13.1 ± 0.9 vs. 12.5 ± 1.0, p = 0.026) were significantly higher in Gp1. CONCLUSION: Screw insertion was the most time-consuming stage of PSF and was significantly longer in severe AIS. Adjunct technologies such as CT-guided navigation and robotic-assisted navigation should be considered to reduce screw insertion time in severe AIS.

Three-column osteotomy in long constructs has lower rates of proximal junctional kyphosis and better restoration of lumbar lordosis than anterior column realignment.

PURPOSE: Three-column osteotomies (TCOs) and minimally invasive techniques such as anterior column realignment (ACR) are powerful tools used to restore lumbar lordosis and sagittal alignment. We aimed to appraise the differences in construct and global spinal stability between TCOs and ACRs in long constructs. METHODS: We identified consecutive patients who underwent a long construct lumbar or thoracolumbar fusion between January 2016 and November 2021. "Long construct" was any construct where the uppermost instrumented vertebra (UIV) was L2 or higher and the lowermost instrumented vertebra (LIV) was in the sacrum or ileum. RESULTS: We identified 69 patients; 14 (20.3%) developed PJK throughout follow-up (mean 838 days). Female patients were less likely to suffer PJK (p = 0.009). TCO was more associated with open (versus minimally invasive) screw/rod placement, greater number of levels, higher UIV, greater rate of instrumentation to the ilium, and posterior (versus anterior) L5-S1 interbody placement versus the ACR cohort (p < 0.001, p < 0.001, p < 0.001, p < 0.001, p = 0.005, respectively). Patients who developed PJK were more likely to have undergone ACR (12 (32.4%) versus 2 (6.3%, p = 0.007)). The TCO cohort had better improvement of lumbar lordosis despite similar preoperative measurements (ACR: 16.8 ± 3.78°, TCO: 23.0 ± 5.02°, p = 0.046). Pelvic incidence-lumbar lordosis mismatch had greater improvement after TCO (ACR: 14.8 ± 4.02°, TCO: 21.5 ± 5.10°, p = 0.042). By multivariate analysis, ACR increased odds of PJK by 6.1-times (95% confidence interval: 1.20-31.2, p = 0.29). CONCLUSION: In patients with long constructs who undergo ACR or TCO, we experienced a 20% rate of PJK. TCO decreased PJK 6.1-times compared to ACR. TCO demonstrated greater improvement of some spinopelvic parameters.

Implantation of S1AIS has priority as a sacroiliac joint fixation technique.

PURPOSE: The sacral alar-iliac screw (SAIS) fixation technique has evolved from spinopelvic fixation which originated from S2AIS to sacroiliac joint fixation, with more reports regarding its application of S2AIS than S1AIS. However, there is a lack of comparative evidence to determine which technique is superior for sacroiliac joint fixation. This study aimed to determine which of the screws was superior in terms of implantation safety and biomechanical stability for sacroiliac joint fixation. METHODS: CT data of 80 normal pelvises were analyzed to measure the insertable range, trajectory lengths and widths of both S1AIS and S2AIS on 3D reconstruction models. Φ 6.5 mm and 8.0 mm screws were implanted on the left and right sides of fifty 3D printed pelvic models respectively to observe for breach of screw implantation. Ten synthetic pelvis models were used to simulate type C Tile injuries, and divided into 2 groups with an anterior plate and posterior fixation using one S1AIS or S2AIS on each side. The stiffness and maximum load of the plated and fixated models were measured under vertical loading. RESULTS: The trajectory lengths and widths of the S1AIS and S2AIS were similar (p > 0.05) and there was no breach for Φ 6.5 mm SAIS. However, both the insertable range and trajectory length on the sacral side of S2AIS (234.56 ± 10.06 mm2, 40.97 ± 2.81 mm) were significantly less, and the breach rate of the posterior lateral cortex of the Φ 8.0 mm S2AIS (46%) was significantly higher than the S1AIS (307.55 ± 10.42 mm2, 42.16 ± 3.06 mm, and 2%, p < 0.05). The stiffness and maximum load of S2AIS were less than S1AIS but the difference was not statistically significant (p > 0.05). CONCLUSION: S1AIS and S2AIS have similar screw trajectories and stability. However, S1AIS has a larger insertable range, less breach of the posterior lateral sacral cortex and longer trajectory length on the sacral side than S2AIS, which indicates S1AIS has higher implantation safety and a trend of better mechanical performance over S2AIS for sacroiliac joint fixation. Furthermore, S2AIS with an excessively large diameter should be used with caution for sacroiliac joint fixation.

Two-step osteotomy/discectomy through cannulated screw (TOCS) technique for en bloc resection of spine tumor: surgical technique and preliminary results.

PURPOSE: We have developed a novel technique for osteotomy/discectomy during en bloc resection of spine tumors named two-step osteotomy/discectomy through cannulated screw (TOCS). This study aims at describing the procedure of TOCS technique and assessing its efficiency and safety. METHODS: We retrospectively reviewed fourteen patients who underwent en bloc resection for spine tumors using TOCS technique in our center between August 2018 and September 2022. The technique was based on a specially designed "slotted" cannulated screw which was a cannulated screw with a longitudinal slot to provide the accessibility of T-saw. During osteotomy/discectomy, the "slotted" cannulated screw was inserted obliquely along the plane between the dura and the posterior wall of spine in light of the planned osteotomy/discectomy plane under routine fluoroscopic imaging guidance. The T-saw was introduced through the screw, and the osteotomy/discectomy was performed sequentially in two steps under the guidance of the screw by turning the slot away and toward the dura. The intra-/perioperative complication, neurological function (determined by Frankel grading), surgical margin (determined by a pathologist using AJCC R system), follow-up details were documented. RESULTS: The mean duration of surgery was 599.3 (360-890) min with a mean volume of intra-operative hemorrhage of 2021.4 (800-5000) mL. The intra-/perioperative complications were found in four patients (28.6%). R0 and R1 resections were achieved in nine and five patients, respectively. There was no R2 resection. After a mean follow-up period of 30.6 (10-67) months, all patients were alive except one patient died ten months after surgery due to unrelated cause. No recurrence and implant failure were found. Thirteen patients (92.9%) exhibited completely normal neurological function same as their preoperative neurological status. CONCLUSION: Using TOCS technique can facilitate a precise, complete and safe osteotomy/discectomy procedure during en bloc resection for spine tumor without the aid of intra-operative navigation.