ABSTRACT
The demand for self-powered photodetectors (PDs) capable of NIR detection without external power is growing with the advancement of NIR technologies such as LIDAR and object recognition. Lead sulfide quantum dot-based photodetectors (PbS QPDs) excel in NIR detection; however, their self-powered operation is hindered by carrier traps induced by surface defects and unfavorable band alignment in the zinc oxide nanoparticle (ZnO NP) electron-transport layer (ETL). In this study, an effective azide-ion (N3 - ) treatment is introduced on a ZnO NP ETL to reduce the number of traps and improve the band alignment in a PbS QPD. The ZnO NP ETL treated with azide ions exhibited notable improvements in carrier lifetime and mobility as well as an enhanced internal electric field within the thin-film heterojunction of the ZnO NPs and PbS QDs. The azide-ion-treated PbS QPD demonstrated a increase in short-circuit current density upon NIR illumination, marking a responsivity of 0.45 A W-1 , specific detectivity of 4 × 1011 Jones at 950 nm, response time of 8.2 µs, and linear dynamic range of 112 dB.
ABSTRACT
We report an ultrathin arrayed camera (UAC) for high-contrast near infrared (NIR) imaging by using microlens arrays with a multilayered light absorber. The UAC consists of a multilayered composite light absorber, inverted microlenses, gap-alumina spacers and a planar CMOS image sensor. The multilayered light absorber was fabricated through lift-off and repeated photolithography processes. The experimental results demonstrate that the image contrast is increased by 4.48 times and the MTF 50 is increased by 2.03 times by eliminating optical noise between microlenses through the light absorber. The NIR imaging of UAC successfully allows distinguishing the security strip of authentic bill and the blood vessel of finger. The ultrathin camera offers a new route for diverse applications in biometric, surveillance, and biomedical imaging.
Subject(s)
Photography/instrumentation , Spectroscopy, Near-Infrared/instrumentation , Equipment Design , LensesABSTRACT
We report a new microfabrication method of multifocal microlens arrays (MF-MLAs) for extended depth-of-field (DoF) using multilayer photolithography and thermal reflow. Microlenses of different focal lengths were simultaneously fabricated on a single glass wafer by using repeated photolithography with multiple photomasks to define microposts of different thicknesses and concurrent thermal reflow of multi-stacked microposts. The diverse lens curvatures of MF-MLAs are precisely controlled by the thickness of the micropost. Hexagonally packaged MF-MLAs clearly show three different focal lengths of 249 µm, 310 µm, and 460 µm for 200 µm in lens diameter and result in multifocal images on a single image sensor. This method provides a new route for developing various three-dimensional (3D) imaging applications such as light-field cameras or 3D medical endoscopes.
ABSTRACT
Antireflective structures, inspired from moth eyes, are still reserved for practical use due to their large-area nanofabrication and mechanical stability. Here we report an antireflective optical lens with large-area glass nanoholes. The nanoholes increase light transmission due to the antireflective effect, depending on geometric parameters such as fill factor and height. The glass nanoholes of low effective refractive index are achieved by using solid-state dewetting of ultrathin silver film, reactive ion etching, and wet etching. An ultrathin silver film is transformed into nanoholes for an etch mask in reactive ion etching after thermal annealing at a low temperature. Unlike conventional nanopillars, nanoholes exhibit high light transmittance with enhancement of ~4% over the full visible range as well as high mechanical hardness. Also, an antireflective glass lens is achieved by directly employing nanoholes on the lens surface. Glass nanoholes of highly enhanced optical and mechanical performance can be directly utilized for commercial glass lenses in various imaging and lighting applications.
ABSTRACT
3D in vivo imaging techniques facilitate disease tracking and treatment, but bulky configurations and motion artifacts limit practical clinical applications. Compact light-field cameras with microlens arrays offer a feasible option for rapid volumetric imaging, yet their utilization in clinical practice necessitates an increased depth-of-field for handheld operation. Here, we report deep focus light-field camera (DF-LFC) with crosstalk-free solid immersion microlens arrays (siMLAs), allowing large depth-of-field and high-resolution imaging for handheld 3D intraoral scanning. The siMLAs consist of thin PDMS-coated microlens arrays and a metal-insulator-metal absorber to extend the focal length with low optical crosstalk and specular reflection. The experimental results show that the immersion of MLAs in PDMS increases the focal length by a factor of 2.7 and the transmittance by 5.6%-27%. Unlike conventional MLAs, the siMLAs exhibit exceptionally high f-numbers up to f/6, resulting in a large depth-of-field for light-field imaging. The siMLAs were fully integrated into an intraoral scanner to reconstruct a 3D dental phantom with a distance measurement error of 82 ± 41 µm during handheld operation. The DF-LFC offers a new direction not only for digital dental impressions with high accuracy, simplified workflow, reduced waste, and digital compatibility but also for assorted clinical endoscopy and microscopy.
ABSTRACT
The antireflection coating on an optical lens plays a key role not only in minimizing specular reflection but also in maximizing light transmission. Antireflective structures (ARS) found in the eyes of moths have the same role as conventional antireflection coating, and they also provide many intriguing features such as broadband coverage, self-antireflection, and strong water repellence. In particular, ARS on a highly flexible membrane can effectively deliver antireflective properties, which are rarely achieved by conventional hard coating. Herein, we report antireflective structures on a highly flexible elastomeric lens membrane for tunable endoscopic imaging applications. A thin antireflective membrane was fabricated using a large-area nanohole template and replica molding. The thin membrane increases light transmittance up to 96.8% in the visible region while enhancing the image contrast up to 56%, higher than that of a smooth membrane during lens deformation. This antireflective, tunable, liquid-filled lens offers new opportunities for compact endoscopic laparoscopy enabling maximum transmittance and variable zoom imaging in narrow and low-illumination environments.
ABSTRACT
We report a fiber-optic plasmonic probe with nanogap-rich gold nanoislands for on-site surface-enhanced Raman spectroscopy (SERS). The plasmonic probe features nanogap-rich Au nanoislands on the top surface of a single multimode fiber. Au nanoislands were monolithically fabricated using repeated solid-state dewetting of thermally evaporated Au thin film. The plasmonic probe shows 7.8 × 106 in SERS enhancement factor and 100 nM in limit-of-detection for crystal violet under both the excitation of laser light and the collection of SERS signals through the optical fiber. The fiber-through measurement also demonstrates the label-free SERS detection of folic acid at micromolar level. The plasmonic probe can provide a tool for on-site and in vivo SERS applications.
Subject(s)
Fiber Optic Technology/instrumentation , Gold/chemistry , Nanostructures/chemistry , Nanotechnology/methods , Spectrum Analysis, Raman/instrumentation , Equipment Design , Folic Acid/analysis , Limit of Detection , Nanotechnology/instrumentation , Signal Processing, Computer-Assisted , Spectrum Analysis, Raman/methodsABSTRACT
Subwavelength metal nanoislands thermally dewetted from a thin film emerge as a powerful and cost-effective photonic material, due to the formation of substantially strong nano-gap-based plasmonic hot spots and their simple large-area nanofabrication. Unlike conventional nanostructures, nanoislands dewetted from thin metal films can be formed on a large scale at the wafer level and show substrate-dependent plasmonic phenomena across a broad spectral range from ultraviolet to infrared. Substrate-selective dewetting methods for metal nanoislands enable diverse nanophotonic and optoelectronic technologies, underlining mechanical, structural, and material properties of a substrate. Emerging bioplasmonic technology using metal nanoislands also serves as a high-throughput and surface-sensitive analytical technique with wide-ranging application in rapid, real-time, and point-of-care medical diagnostics. This review introduces an assortment of dewetting fabrication methods for metal nanoislands on distinct substrates from glass to cellulose fibers and provides novel findings for metal nanoislands on a substrate by three-dimensional numerical modeling. Furthermore, the plasmonic properties of metal nanoislands and recent examples for their photonic applications, in particular, biological sensing, are technically summarized and discussed.
Subject(s)
Nanostructures/chemistry , Alloys/chemistry , Electronics , Metals/chemistry , Nanomedicine , Optics and Photonics , Point-of-Care SystemsABSTRACT
Severe portal vein thrombosis (PVT) is often considered a relative contraindication for living donor liver transplantation due to high associated risks and morbidity. Meanwhile, improvement in operative techniques, resulting in higher success rates has removed PVT from the list of contraindications in deceased donor liver transplantation (DDLT). In this report, we describe a surgical technique for DDLT using polytetrafluoroethylene graft from the inferior mesenteric vein for portal inflow in patient with portomesenteric thrombosis.
Subject(s)
End Stage Liver Disease/surgery , Liver Transplantation/methods , Portal Vein/surgery , Vascular Grafting , Venous Thrombosis/surgery , End Stage Liver Disease/complications , Humans , Male , Mesenteric Veins/surgery , Middle Aged , Polytetrafluoroethylene , Tissue Donors , Treatment Outcome , Ultrasonography, Doppler , Venous Thrombosis/diagnostic imaging , Venous Thrombosis/etiologyABSTRACT
A term "mesoesophagus" has been often used by surgeons, but the morphology was not described well. To better understand the structures attaching the human abdominal and lower thoracic esophagus to the body wall, we examined serial or semiserial sections from 10 embryos and 9 fetuses. The esophagus was initially embedded in a large posterior mesenchymal tissue, which included the vertebral column and aorta. Below the tracheal bifurcation at the fifth week, the esophagus formed a mesentery-like structure, which we call the "mesoesophagus," that was sculpted by the enlarging lungs and pleural cavity. The pneumatoenteric recess of the pleuroperitoneal canal was observed in the lowest part of the mesoesophagus. At the seventh week, the mesoesophagus was divided into the upper long and lower short parts by the diaphragm. Near the esophageal hiatus, the pleural cavity provided 1 or 2 recesses in the upper side, while the fetal adrenal gland in the left side was attached to the lower side of the mesoesophagus. At the 10th and 18th week, the mesoesophagus remained along the lower thoracic esophagus, but the abdominal esophagus attached to the diaphragm instead of to the left adrenal. The mesoesophagus did not contain any blood vessels from the aorta and to the azygos vein. The posterior attachment of the abdominal esophagus seemed to develop to the major part of the phrenoesophageal membrane with modification from the increased mass of the left fetal adrenal. After postnatal degeneration of the fetal adrenal, the abdominal esophagus might again obtain a mesentery. Consequently, the mesoesophagus seemed to correspond to a small area containing the pulmonary ligament and aorta in adults.