ABSTRACT
Synergistic control of nitrogen oxides (NOx) and nitrogen-containing volatile organic compounds (NVOCs) from industrial furnaces is necessary. Generally, the elimination of n-butylamine (n-B), a typical pollutant of NVOCs, requires a catalyst with sufficient redox ability. This process induces the production of nitrogen-containing byproducts (NO, NO2, N2O), leading to lower N2 selectivity of NH3 selective catalytic reduction of NOx (NH3-SCR). Here, synergistic catalytic removal of NOx and n-B via spatially separated cooperative sites was originally demonstrated. Specifically, titania nanotubes supported CuOx-CeO2 (CuCe-TiO2 NTs) catalysts with spatially separated cooperative sites were creatively developed, which showed a broader active temperature window from 180 to 340 °C, with over 90% NOx conversion, 85% n-B conversion, and 90% N2 selectivity. A synergistic effect of the Cu and Ce sites was found. The catalytic oxidation of n-B mainly occurred at the Cu sites inside the tube, which ensured the regular occurrence of the NH3-SCR reaction on the outer Ce sites under the matching temperature window. In addition, the n-B oxidation would produce abundant intermediate NH2*, which could act as an extra reductant to promote NH3-SCR. Meanwhile, NH3-SCR could simultaneously remove the possible NOx byproducts of n-B decomposition. This novel strategy of constructing cooperative sites provides a distinct pathway for promoting the synergistic removal of n-B and NOx.
Subject(s)
Nitrogen Oxides , Catalysis , Nitrogen Oxides/chemistry , Volatile Organic Compounds/chemistry , Oxidation-ReductionABSTRACT
The development of efficient technologies for the synergistic catalytic elimination of NOx and chlorinated volatile organic compounds (CVOCs) remains challenging. Chlorine species from CVOCs are prone to catalyst poisoning, which increases the degradation temperature of CVOCs and fails to balance the selective catalytic reduction of NOx with the NH3 (NH3-SCR) performance. Herein, synergistic catalytic elimination of NOx and chlorobenzene has been originally demonstrated by using phosphotungstic acid (HPW) as a dechlorination agent to collaborate with CeO2. The conversion of chlorobenzene was over 80% at 270 °C, and the NOx conversion and N2 selectivity reached over 95% at 270-420 °C. HPW not only allowed chlorine species to leave as inorganic chlorine but also enhanced the BroÌ·nsted acidity of CeO2. The NH4+ produced in the NH3-SCR process can effectively promote the dechlorination of chlorobenzene at low temperatures. HPW remained structurally stable in the synergistic reaction, resulting in good water resistance and long-term stability. This work provides a cheaper and more environmentally friendly strategy to address chlorine poisoning in the synergistic reaction and offers new guidance for multipollutant control.
Subject(s)
Chlorobenzenes , Catalysis , Chlorobenzenes/chemistry , Volatile Organic Compounds/chemistry , Chlorine/chemistry , Cerium/chemistry , HalogenationABSTRACT
Unraveling the dynamics of the active sites upon CeO2-based catalysts in selective catalytic reduction of nitrogen oxides by ammonia (NH3-SCR) is challenging. In this work, we prepared tungsten-acidified and sulfated CeO2 catalysts and used operando spectroscopy to reveal the dynamics of acid sites and redox sites on catalysts during NH3-SCR reaction. We found that both Lewis and Brønsted acid sites are needed to participate in the catalytic reaction. Notably, Brønsted acid sites are the main active sites after a tungsten-acidified or sulfated treatment, and the change of Brønsted acid sites significantly affects the NOx removal. Moreover, acid functionalization promotes the cerium species cycle between Ce4+ and Ce3+ for the NOx reduction. This work is critical to deeply understanding the natural properties of active sites, and it also provides new insights into the mechanism for NH3-SCR over CeO2-based catalysts.
ABSTRACT
Mn-based catalysts are promising for selective catalytic reduction (SCR) of NOx with NH3 at low temperatures due to their excellent redox capacity. However, the N2 selectivity of Mn-based catalysts is an urgent problem for practical application owing to excessive oxidizability. To solve this issue, we report a Mn-based catalyst using amorphous ZrTiOx as the support (Mn/ZrTi-A) with both excellent low-temperature NOx conversion and N2 selectivity. It is found that the amorphous structure of ZrTiOx modulates the metal-support interaction for anchoring the highly dispersed active MnOx species and constructs a uniquely bridged Mn3+ bonded with the support through oxygen linked to Ti4+ and Zr4+, respectively, which regulates the optimal oxidizability of the MnOx species. As a result, Mn/ZrTi-A is not conducive to the formation of ammonium nitrate that readily decomposes to N2O, thus further increasing N2 selectivity. This work investigates the role of an amorphous support in promoting the N2 selectivity of a manganese-based catalyst and sheds light on the design of efficient low-temperature deNOx catalysts.
ABSTRACT
Selective catalytic reduction of NOx in the presence of alkali (earth) metals and heavy metals is still a challenge due to the easy deactivation of catalysts. Herein, NOx reduction over smart catalysts with self-created targeted antipoisoning sites is originally demonstrated. The smart catalyst consisted of TiO2 pillared montmorillonite with abundant cation exchange sites to anchor poisoning substances and active components to catalyze NOx into N2. It was not deactivated during the NOx reduction process in the presence of alkali (earth) metals and heavy metals. The enhanced surface acidity, reducible active species, and active chemisorbed oxygen species of the smart catalyst accounted for the remarkable NOx reduction efficiency. More importantly, the self-created targeted antipoisoning sites expressed specific anchoring effects on poisoning substances and protected the active components from poisoning. It was demonstrated that the tetrahedrally coordinated aluminum species of the smart catalyst mainly acted as self-created targeted antipoisoning sites to stabilize the poisoning substances into the interlayers of montmorillonite. This work paves a new way for efficient reduction of NOx from the complex flue gas in practical applications.
Subject(s)
Bentonite , Metals, Heavy , Alkalies , Ammonia , Catalysis , Oxidation-Reduction , TitaniumABSTRACT
The synergistic catalytic removal of NOx and chlorinated volatile organic compounds under low temperatures is still a big challenge. Generally, degradation of chlorinated organics demands sufficient redox ability, which leads to low N2 selectivity in the selective catalytic reduction of NOx by NH3 (NH3-SCR). Herein, mediating acid sites via introducing the CePO4 component into MnO2/TiO2 NH3-SCR catalysts was found to be an effective approach for promoting chlorobenzene degradation. The observation of in situ diffuse reflectance infrared Fourier transform (in situ DRIFT) and Raman spectra reflected that the Lewis acid sites over CePO4 promoted the nucleophilic substitution process of chlorobenzene over MnO2 by weakening the bond between Cl and benzene ring. Meanwhile, MnO2 provided adequate Brønsted acid sites and redox sites. Under the cooperation of Lewis and Brønsted acid sites, relying on the rational redox ability, chlorobenzene degradation was promoted with synergistically improved NH3-SCR activity and selectivity. This work offers a distinct pathway for promoting the combination of chlorobenzene catalytic oxidation and NH3-SCR, and is expected to provide a novel strategy for synergistic catalytic elimination of NOx and chlorinated volatile organic compounds.
Subject(s)
Manganese Compounds , Volatile Organic Compounds , Ammonia/chemistry , Catalysis , Oxidation-Reduction , OxidesABSTRACT
Development of high-efficiency oxygen reduction reaction (ORR) catalysts under neutral conditions has made little research progress. In this work, we synthesized a three-dimensional porous N/P codoped carbon nanosheet composites (CNP@PNS) by high-temperature thermal treatment of dicyandiamide, starch, and triphenylphosphine and subsequent porous structure-making treatment using the NaCl molten salt template. In the neutral solution, the electrocatalytic performance of the CNP@PNS-4 catalyst exhibits an onset potential of 0.98 V (vs reversible hydrogen electrode) and a half-wave potential of 0.91 V for ORR, which greatly surpasses commercial Pt/C (40%). Three kinds of neutral metal-air batteries (Zn-air, Al-air, and Fe-air) using the prepared samples as cathodic catalysts were constructed, corresponding to the maximum power density of 120.2, 78.3, and 18.9 mW·cm-2, respectively. Also, they reveal outstanding discharge stability under different current densities. The density functional theory calculation depicts the reduction of the free energy of the determining step and subsequent decline of the overpotential for ORR.
ABSTRACT
Reducing the poisoning effect arising from alkali metals over catalysts for selective catalytic reduction (SCR) of NOx by NH3 is still an urgent issue to be solved. Herein, alkali-resistant NOx reduction over B-doped CeO2/TiO2 catalysts (Ce-B/TiO2) with Ce-O-B alkali-capture sites was originally demonstrated. It was noted that boron was confirmed to be doped into the lattice of CeO2 to form the Ce-O-B structure. In this way, more active Ce(III) species and oxygen vacancies were generated from B-doped CeO2, thus accelerating the redox cycle and enhancing the adsorption/activation of NO. Gratifyingly, the created Ce-O-B sites as alkali-capture sites could be effectively combined with K and release the poisoned Ce active sites, which maintained efficient NH3 and NO adsorption/activation over K poisoned Ce-B/TiO2. This work paves a way for designing highly efficient and alkali-resistant SCR catalysts in both academic and industrial fields.
Subject(s)
Alkalies , Ammonia , Catalysis , Oxidation-Reduction , TitaniumABSTRACT
The synergistic removal of NOx and chlorinated volatile organic compounds (CVOCs) has become the hot topic in the field of environmental catalysis. However, due to the trade-off effects between catalytic reduction of NOx and catalytic oxidation of CVOCs, it is indispensable to achieve well-matched redox property and acidity. Herein, synergistic catalytic removal of NOx and chlorobenzene (CB, as the model of CVOCs) has been originally demonstrated over a Co-doped SmMn2O5 mullite catalyst. Two kinds of Mn-Mn sites existed in Mn-O-Mn-Mn and Co-O-Mn-Mn sites were constructed, which owned gradient redox ability. It has been demonstrated that the cooperation of different active sites can achieve the balanced redox and acidic property of the SmMn2O5 catalyst. It is interesting that the d band center of Mn-Mn sites in two different sites was decreased by the introduction of Co, which inhibited the nitrate species deposition and significantly improved the N2 selectivity. The Co-O-Mn-Mn sites were beneficial to the oxidation of CB and it cooperates with Mn-O-Mn-Mn to promote the synergistic catalytic performance. This work paves the way for synergistic removal of NOx and CVOCs over cooperative active sites in catalysts.
ABSTRACT
The role of phosphorus in metal oxide catalysts is still controversial. The precise tuning of the acidic and redox properties of metal oxide catalysts for the selective catalytic reduction in NOx using NH3 is also a great challenge. Herein, CeO2 catalysts with different degrees of phosphorylation were used to study the balance between the acidity and redox property by promoting and inhibiting effects of phosphorus. CeO2 catalysts phosphorylated with lower phosphorus content (5 wt%) exhibited superior NOx reduction performance with above 90% NOx conversion during 240-420 °C due to the balanced acidity and reducibility derived from the highest content of Brønsted acid sites on PO43- to adsorb NH3 and surface adsorbed oxygen species. Plenty of PO3- over CeO2 catalysts phosphorylated with the higher phosphorus content (≥ 10 wt%) significantly disrupted the balance between the acidity and the redox property due to the reduced acid/redox sites, which resulted in the less active NOx species. The mechanism of different structural phosphorus species (PO43- and PO3-) in promoting or inhibiting the NOx reduction over CeO2 catalysts was revealed. This work provides a novel method for qualitative and quantitative study of the relationship between acidity/redox property and activity of catalysts for NOx reduction.
Subject(s)
Cerium , Phosphorus , Acids , Ammonia/chemistry , Catalysis , Cerium/chemistry , Oxidation-Reduction , Oxides/chemistry , OxygenABSTRACT
In general, co-reactants are essential in highly efficient electrochemiluminescence (ECL) systems. Traditional co-reactants are usually toxic, so it is necessary to develop new environmentally friendly co-reactants. In this work, carbon dots (CDs) were assembled with dendritic silica nanospheres (CDs@dSiO2 NPs) to form a co-reactant of Ru(bpy)32+. Subsequently, a sandwich immunosensor for detecting human chorionic gonadotropin (HCG) was constructed based on CDs@dSiO2 NPs as co-reactants, the nanoprobe loaded with the secondary antibody, and Ru(bpy)32+ as a luminophore. In addition, compared to directly as a signal probe, the luminophore Ru (bpy)32+ as a part of the electrolyte solution is simpler in this work. The immunosensor has an extremely low limit of detection of 0.00019 mIU/mL. This work describes the synthesis of low-toxic, efficient, and environmentally friendly CDs, which have become ideal co-reactants of Ru(bpy)32+, and proposes an ECL immunosensor with excellent stability and selectivity, which has great potential in clinical applications.
Subject(s)
Biosensing Techniques , Metal Nanoparticles , Humans , Carbon , Immunoassay , Luminescent Measurements , Electrochemical Techniques , Limit of DetectionABSTRACT
Au/CeO(2) catalysts are highly active for low-temperature CO oxidation and water-gas shift reaction, but they deactivate rapidly because of sintering of gold nanoparticles, linked to the collapse or restructuring of the gold-ceria interfacial perimeters. To date, a detailed atomic-level insight into the restructuring of the active gold-ceria interfaces is still lacking. Here, we report that gold particles of 2-4 nm size, strongly anchored onto rod-shaped CeO(2), are not only highly active but also distinctively stable under realistic reaction conditions. Environmental transmission electron microscopy analyses identified that the gold nanoparticles, in response to alternating oxidizing and reducing atmospheres, changed their shapes but did not sinter at temperatures up to 573 K. This finding offers a new strategy to stabilize gold nanoparticles on ceria by engineering the gold-ceria interfacial structure, which could be extended to other oxide-supported metal nanocatalysts.
ABSTRACT
Searching for high-quality air electrode catalysts is the long-term goal for the practical application of Zn-air batteries. Here, a series of coexistent composite materials (CoNi/NHCS-TUC-x) of cobalt-nickel supported on nitrogen-doped hollow spherical carbon and tubular carbon are obtained using a simple pyrolysis strategy. Co and Ni in the composites are mainly present in the form of alloy nanoparticles, M-Nx and M-Cx (M = Co or Ni) species, with high oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) electroactivity. The materials containing different proportions of spherical carbon and tubular carbon obtained by simply adjusting the raw materials for generating tubular carbon exhibit interesting bifunctional performance: samples with an abundant tubular content have the highest ORR onset potential (0.91 V vs reversible hydrogen electrode), while those with a rich spherical content have the highest ORR current density (5.13 mA·cm-2). Furthermore, CoNi/NHCS-TUC-3 provides the lowest potential difference (ΔE = Ej=10 - E1/2) of 0.806 V. We then test the potential possibility of CoNi/NHCS-TUC-3 as an air electrode for primary and rechargeable Zn-air batteries. The primary battery delivers an open-circuit potential of 1.59 V, a peak power density of 361.8 mA·cm-2, and a specific capacity of 756.5 mA h·gZn-1. The rechargeable battery could be cycled stably for more than 55 h at 10 mA·cm-2. These characteristics make CoNi/NHCS-TUC-3 a superior electrocatalyst for both the ORR and OER, as well as a suitable bifunctional electrode applied to a rechargeable Zn-air battery.
ABSTRACT
Highly selective conversion of carbon dioxide (CO2) into valuable hydrocarbons is promising yet challenging in developing effective electrocatalysts. Herein, CuII/adeninato/carboxylato metal-biomolecule frameworks (CuII/ade-MOFs) are employed for efficient CO2 electro-conversion towards hydrocarbon generation. The cathodized CuII/ade-MOF nanosheets demonstrate excellent catalytic performance for CO2 conversion into valuable hydrocarbons with a total hydrocarbon faradaic efficiency (FE) of over 73%. Ethylene (C2H4) is produced with a maximum FE of 45% and a current density of 8.5 mA cm-2 at -1.4 V vs. RHE, while methane (CH4) is produced with a FE of 50% and current density of â¼15 mA cm-2 at -1.6 V vs. RHE. These investigations reveal that the reconstruction of cathodized CuII/ade-MOFs and the formed Cu nanoparticles functionalized by nitrogen-containing ligands contribute to the excellent CO2 conversion performance. Furthermore, this work would provide valuable insights and opportunities for the rational design of Cu-based MOF catalysts for highly efficient conversion of CO2 towards hydrocarbon generation.