Three stage HCF fabrication technique for high yield, broadband UV-visible fibers.

Hollow-core optical fibers can offer broadband, single mode guidance in the UV-visible-NIR wavelength range, with the potential for low-loss, solarization-free operation, making them desirable and potentially disruptive for a wide range of applications. To achieve this requires the fabrication of fibers with <300nm anti-resonant membranes, which is technically challenging. Here we investigate the underlying fluid dynamics of the fiber fabrication process and demonstrate a new three-stage fabrication approach, capable of delivering long (∼350m) lengths of fiber with the desired thin-membranes.

Transient gas-induced differential refractive index effects in as-drawn hollow core optical fibers.

When a hollow core fiber is drawn, the core and cladding holes within the internal cane geometry are pressurized with an inert gas to enable precise control over the internal microstructure of the fiber and counteract surface tension forces. Primarily by considering the temperature drop as the fiber passes through the furnace and the geometrical transformation of the internal microstructure from preform-to-fiber, we recently established that the gas pressure within the final 'as-drawn' fiber is substantially below atmospheric pressure. We have also established that slight changes in the gas refractive index within the core and surrounding cladding holes induced by changes in gas pressure are sufficient to significantly affect both the modality and loss of the fiber. Here we demonstrate, through both simulations and experimental measurements, that the combination of these effects leads to transient changes in the fiber's attenuation when the fibers are opened to atmosphere post-fabrication. It is important to account for this phenomenon for accurate fiber characterization, particularly when long lengths of fiber are drawn where it could take many weeks for every part of the internal microstructure to reach atmospheric pressure.

Double-Clad Antiresonant Hollow-Core Fiber and Its Comparison with Other Fibers for Multiphoton Micro-Endoscopy.

Label-free and multiphoton micro-endoscopy can transform clinical histopathology by providing an in situ tool for diagnostic imaging and surgical treatment in diseases such as cancer. Key to a multiphoton imaging-based micro-endoscopic device is the optical fiber, for distortion-free and efficient delivery of ultra-short laser pulses to the sample and effective signal collection. In this work, we study a new hollow-core (air-filled) double-clad anti-resonant fiber (DC-ARF) as a high-performance candidate for multiphoton micro-endoscopy. We compare the fiber characteristics of the DC-ARF with a single-clad anti-resonant fiber (SC-ARF) and a solid core fiber (SCF). In this work, while the DC-ARF and the SC-ARF enable low-loss (<0.2 dBm-1), close to dispersion-free excitation pulse delivery (<10% pulse width increase at 900 nm per 1 m fiber) without any induced non-linearities, the SCF resulted in spectral broadening and pulse-stretching (>2000% of pulse width increase at 900 nm per 1 m fiber). An ideal optical fiber endoscope needs to be several meters long and should enable both excitation and collection through the fiber. Therefore, we performed multiphoton imaging on endoscopy-compatible 1 m and 3 m lengths of fiber in the back-scattered geometry, wherein the signals were collected either directly (non-descanned detection) or through the fiber (descanned detection). Second harmonic images were collected from barium titanate crystals as well as from biological samples (mouse tail tendon). In non-descanned detection conditions, the ARFs outperformed the SCF by up to 10 times in terms of signal-to-noise ratio of images. Significantly, only the DC-ARF, due to its high numerical aperture (NA) of 0.45 and wide-collection bandwidth (>1 µm), could provide images in the de-scanned detection configuration desirable for endoscopy. Thus, our systematic characterization and comparison of different optical fibers under different image collection configurations, confirms and establishes the utility of DC-ARFs for high-performing label-free multiphoton imaging-based micro-endoscopy.

Anthropogenic Vector Ecology and Management to Combat Disease Spread in Aquaculture.

Anthropogenic vectors (transfer mechanisms) can facilitate the introduction and spread of aquatic disease in marine farming regions. Preventing or interrupting pathogen transfers associated with movements of these vectors is key to ensuring productivity and profitability of aquaculture operations. However, practical methods to identify and manage vector risks are lacking. We developed a risk analysis framework to identify disease risks and management gaps associated with anthropogenic vector movements in New Zealand's main aquaculture sectors - Chinook salmon (Oncorhynchus tshawytscha), green-lipped mussels (Perna canaliculus), and Pacific oysters (Crassostrea gigas). Vectors within each sector were identified and assigned categorical risk scores for (i) movement characteristics (size, frequency, likelihood of return to sea), (ii) biological association with pathogens (entrainment potential, contribution to previous aquaculture disease outbreaks) and (iii) available best practice biosecurity methods and tools, to inform unmitigated and mitigated risk rankings. Thirty-one vectors were identified to operate within the national network and association with livestock was found to be a primary driver of vector risk rankings. Movements of live growing stock and culture substrates (e.g., mussel ropes) in shellfish farming had high-risk vector profiles that are logistically challenging to address, while vessel vectors were identified as the salmon farming sector's priority. The framework and rankings can be used to inform both research and management priorities in aquaculture and other primary production systems, including risk validation, vector roles in disease epidemiology, compliance with permit conditions, policy development, and treatment options.

On-target delivery of intense ultrafast laser pulses through hollow-core anti-resonant fibers.

We report the flexible on-target delivery of 800 nm wavelength, 5 GW peak power, 40 fs duration laser pulses through an evacuated and tightly coiled 10 m long hollow-core nested anti-resonant fiber by positively chirping the input pulses to compensate for the anomalous dispersion of the fiber. Near-transform-limited output pulses with high beam quality and a guided peak intensity of 3 PW/cm2 were achieved by suppressing plasma effects in the residual gas by pre-pumping the fiber with laser pulses after evacuation. This appears to cause a long-term removal of molecules from the fiber core. Identifying the fluence at the fiber core-wall interface as the damage origin, we scaled the coupled energy to 2.1 mJ using a short piece of larger-core fiber to obtain 20 GW at the fiber output. This scheme can pave the way towards the integration of anti-resonant fibers in mJ-level nonlinear optical experiments and laser-source development.

High power Raman second stokes generation in a methane filled hollow core fiber.

We demonstrate a multi-watt, picosecond pulse duration laser source by exploiting a cascaded Raman process to the second Stokes signal at a wavelength of 2.58 µm in a methane-filled Nested Anti-Resonant Nodeless fiber from a 1 µm disk laser source. A maximum average power of 2.89 W (14.45 µJ) is produced in a 160 cm length of custom-designed and in-house fabricated fiber filled with methane at a pressure of 2 bar. The impact of gas pressure and propagation distance on the second Stokes signal power are investigated experimentally. The experimental results are simulated by solving the Generalized Nonlinear Schrodinger Equation with the experiment carefully modelled by accounting for the impacts of pressure dependent gas-light interactions along the pressure gradient of the fiber. This work offers a laser source for a variety of applications as well as expanding the modelling space to methane filled fibers including pressure gradients, and nonlinear optical activity in the presence of infrared gas absorption.

Fiber-delivered heterodyne spectroscopy with a mid-infrared frequency comb.

By exploiting the excellent short-term phase stability between consecutive pulses from a free-running optical parametric oscillator frequency comb, we report the first example of hollow-core fiber-delivered heterodyne spectroscopy in the 3.1-3.8 µm wavelength range. The technique provides a means of spectroscopically interrogating a sample situated at the distal end of a fiber, with all electronics and light sources situated at the proximal end and with an inherent capability to suppress spectroscopically interfering features present in the free-space and in-fiber delivery path. Using a silica anti-resonant, hollow-core delivery fiber, we demonstrate high quality transmission and attenuated total reflectance spectroscopy of a plastic sample for fiber lengths of up to 40 m, significantly exceeding the few-meter lengths typically possible using solid-core fibers. The technique opens a route to implementing multi-species spectroscopic monitoring in remote and / or hostile industrial environments and medical applications.

Biofouling occlusion of ships' internal seawater systems: operational, economic, and biosecurity consequences.

Biofouling of ships' internal seawater systems (ISS) can cause significant operational issues and is a potential transfer mechanism for marine nonindigenous species. This study used an engine room simulator and economic evaluation to quantify impacts on commercial ship performance of biofouling occlusion within various ISS nodes (sea chest, strainer, and heat exchangers). A characteristic hockey-stick relationship between occlusion and impact emerged, whereby engine room systems could tolerate up to 55% occlusion of a single node without operational impact, followed by rapid performance deterioration. The relative magnitude of impacts varied by ISS node and in response to changes in ambient seawater temperatures. System tolerance was much lower when simultaneous occlusion of multiple nodes was assessed. In economic terms, consequences included required freight rate increases of 1-26% prior to forced (automatic) slowdown of the ship and up to 82% increases if slowdown conditions were required.

Hollow-core fiber delivery of broadband mid-infrared light for remote spectroscopy.

High-resolution multi-species spectroscopy is achieved by delivering broadband 3-4-µm mid-infrared light through a 4.5-meter-long silica-based hollow-core optical fiber. Absorptions from H37Cl, H35Cl, H2O and CH4 present in the gas within the fiber core are observed, and the corresponding gas concentrations are obtained to 5-ppb precision using a high-resolution Fourier-transform spectrometer and a full-spectrum multi-species fitting algorithm. We show that by fully fitting the narrow absorption features of these light molecules their contributions can be nulled, enabling further spectroscopy of C3H6O and C3H8O contained in a Herriott cell after the fiber. As a demonstration of the potential to extend fiber-delivered broadband mid-infrared spectroscopy to significant distances, we present a high-resolution characterization of the transmission of a 63-meter length of hollow-core fiber, fully fitting the input and output spectra to obtain the intra-fiber gas concentrations. We show that, despite the fiber not having been purged, useful spectroscopic windows are still preserved which have the potential to enable hydrocarbon spectroscopy at the distal end of fibers with lengths of tens or even hundreds of meters.

Sub-ppm gas phase Raman spectroscopy in an anti-resonant hollow core fiber.

We demonstrate recent progress in the development of a Raman gas sensor using a single cladding ring anti-resonant hollow core micro-structured optical fiber (HC-ARF) and a low power pump source. The HC-ARF was designed specifically for low attenuation and wide bandwidth in the visible spectral region and provided low loss at both the pump wavelength (532 nm) and Stokes wavelengths up to a Raman shift of 5000 cm-1. A novel selective core pressurization scheme was also implemented to further reduce the confinement loss, improving the Raman signal enhancement by a factor of 1.9 compared to a standard fiber filling scheme. By exploiting longer lengths of fiber, direct detection of both methane and hydrogen at concentrations of 5 and 10 ppm respectively is demonstrated and a noise equivalent limit-of-detection of 0.15 ppm is calculated for methane.

Hundred-meter-scale, kilowatt peak-power, near-diffraction-limited, mid-infrared pulse delivery via the low-loss hollow-core fiber.

We report a high-power single-mode mid-infrared (MIR) pulse delivery system via anti-resonant hollow-core fiber (HCF) with a record delivery distance of 108 m. Near-diffraction-limited MIR light was transmitted by HCFs at wavelengths of 3.12-3.58 µm using a tunable optical parametric oscillator (OPO) as the light source. The HCFs were purged beforehand with argon in order to remove or reduce loss due to parasitic gas absorption (HCl, CO2, etc.). The minimum fiber loss values were 0.05 and 0.24 dB/m at 3.4-3.6 µm and 4.5-4.6 µm, respectively, with the 4.5-4.6 µm loss figure representing, to the best of our knowledge, a new low loss record for a HCF in this spectral region. At a coupling efficiency of ∼70%, average powers of 592 mW and 133 mW were delivered through 5 m and 108 m of HCF, respectively. Assuming the 120-ps duration of the MIR pulses remained constant over the low-dispersion HCF (theoretical maximum: 0.4 ps/nm/km), the corresponding calculated peak powers were 4.9 kW and 1.1 kW.

Utilizing broadband wavelength-division multiplexing capabilities of hollow-core fiber for quantum communications.

One of the major challenges in the deployment of quantum communications (QC) over solid-core silica optical fiber is the performance degradation due to the optical noise generated with co-propagating classical optical signals. To reduce the impact of the optical noise, research teams are turning to new and novel architectures of solid-core and hollow-core optical fiber. We studied the impact when co-propagating a single-photon level (850 nm) and two classical optical signals (940 nm and 1550 nm) while utilizing a nested antiresonant nodeless fiber (NANF) with two low-loss windows. The 940 nm signal was shown to impact the single-photon measurement due to the silicon detector technology implemented; however, multiplexing techniques and filtering could reduce the impact. The 1550 nm signal was shown to have no detrimental impact. The results highlight that both high bandwidth optical traffic at 1550 nm and a QC channel at 850 nm could co-propagate without degradation to the QC channel.

Comparing machine and deep learning-based algorithms for prediction of clinical improvement in psychosis with functional magnetic resonance imaging.

Previous work using logistic regression suggests that cognitive control-related frontoparietal activation in early psychosis can predict symptomatic improvement after 1 year of coordinated specialty care with 66% accuracy. Here, we evaluated the ability of six machine learning (ML) algorithms and deep learning (DL) to predict "Improver" status (>20% improvement on Brief Psychiatric Rating Scale [BPRS] total score at 1-year follow-up vs. baseline) and continuous change in BPRS score using the same functional magnetic resonance imaging-based features (frontoparietal activations during the AX-continuous performance task) in the same sample (individuals with either schizophrenia (n = 65, 49M/16F, mean age 20.8 years) or Type I bipolar disorder (n = 17, 9M/8F, mean age 21.6 years)). 138 healthy controls were included as a reference group. "Shallow" ML methods included Naive Bayes, support vector machine, K Star, AdaBoost, J48 decision tree, and random forest. DL included an explainable artificial intelligence (XAI) procedure for understanding results. The best overall performances (70% accuracy for the binary outcome and root mean square error = 9.47 for the continuous outcome) were achieved using DL. XAI revealed left DLPFC activation was the strongest feature used to make binary classification decisions, with a classification activation threshold (adjusted beta = .017) intermediate to the healthy control mean (adjusted beta = .15, 95% CI = -0.02 to 0.31) and patient mean (adjusted beta = -.13, 95% CI = -0.37 to 0.11). Our results suggest DL is more powerful than shallow ML methods for predicting symptomatic improvement. The left DLPFC may be a functional target for future biomarker development as its activation was particularly important for predicting improvement.

Compact micro-optic based components for hollow core fibers.

Using micro-optic collimator technology, we present compact, low-loss optical interconnection devices for hollow core fibers (HCFs). This approach is one of the key manufacturing platforms for commercially available fiber optic components and most forms of HCFs can readily be incorporated into this platform without the need for any substantial or complicated adaptation or physical deformation of the fiber structure. Furthermore, this technique can provide for very low Fresnel reflection interconnection between solid-core fiber and HCF and in addition provides a hermetic seal for HCFs, which can be a critical issue for many HCF applications. In this paper, several exemplar HCF components are fabricated with low insertion loss (0.5-2 dB), low Fresnel reflection (-45 dB) and high modal purity (>20 dB) using various state-of-the-art HCFs.

The RxLR Motif of the Host Targeting Effector AVR3a of Phytophthora infestans Is Cleaved before Secretion.

When plant-pathogenic oomycetes infect their hosts, they employ a large arsenal of effector proteins to establish a successful infection. Some effector proteins are secreted and are destined to be translocated and function inside host cells. The largest group of translocated proteins from oomycetes is the RxLR effectors, defined by their conserved N-terminal Arg-Xaa-Leu-Arg (RxLR) motif. However, the precise role of this motif in the host cell translocation process is unclear. Here, detailed biochemical studies of the RxLR effector AVR3a from the potato pathogen Phytophthora infestans are presented. Mass spectrometric analysis revealed that the RxLR sequence of native AVR3a is cleaved off prior to secretion by the pathogen and the N terminus of the mature effector was found likely to be acetylated. High-resolution NMR structure analysis of AVR3a indicates that the RxLR motif is well accessible to potential processing enzymes. Processing and modification of AVR3a is to some extent similar to events occurring with the export element (PEXEL) found in malaria effector proteins from Plasmodium falciparum These findings imply a role for the RxLR motif in the secretion of AVR3a by the pathogen, rather than a direct role in the host cell entry process itself.

An experimental test of stationary lay-up periods and simulated transit on biofouling accumulation and transfer on ships.

Biofouling accumulation on ships' submerged surfaces typically occurs during stationary periods that render surfaces more susceptible to colonization than when underway. As a result, stationary periods longer than typical port residence times (hours to days), often referred to as lay-ups, can have deleterious effects on hull maintenance strategies, which aim to minimize biofouling impacts on ship operations and the likelihood of invasive species transfers. This experimental study tested the effects of different lay-up durations on the magnitude of biofouling, before and after exposure to flow, using fouling panels with three coating treatments (antifouling, foul-release, and controls), at two sites, and a portable field flume to simulate voyage sheer forces. Control panels subjected to extended stationary durations (28-, 45- and 60-days) had significantly higher biofouling cover and there was a 13- to 25-fold difference in biofouling accumulation between 10-days and 28-days of static immersion. Prior to flume exposure, the antifouling coating prevented biofouling accumulation almost entirely at one site and kept it below 20% at the other. Foul-release coatings also proved effective, especially after flume exposure, which reduced biofouling at one site from >52% to <6% cover (on average). The experimental approach was beneficial for co-locating panel deployments and flume processing using a consistent (standardized) flow regime on large panels across sites of differing conditions and biofouling assemblages. While lay-ups of commercial vessels are relatively common, inevitable, and unavoidable, it is important to develop a better understanding of the magnitude of their effects on biofouling of ships' submerged surfaces and to develop workable post-lay-up approaches to manage and respond to elevated biofouling accumulation that may result.

Differential effects of biological invasions on coastal blue carbon: A global review and meta-analysis.

Human-caused shifts in carbon (C) cycling and biotic exchange are defining characteristics of the Anthropocene. In marine systems, saltmarsh, seagrass, and mangrove habitats-collectively known as "blue carbon" and coastal vegetated habitats (CVHs)-are a leading sequester of global C and increasingly impacted by exotic species invasions. There is growing interest in the effect of invasion by a diverse pool of exotic species on C storage and the implications for ecosystem-based management of these systems. In a global meta-analysis, we synthesized data from 104 papers that provided 345 comparisons of habitat-level response (plant and soil C storage) from paired invaded and uninvaded sites. We found an overall net effect of significantly higher C pools in invaded CVHs amounting to 40% (±16%) higher C storage than uninvaded habitat, but effects differed among types of invaders. Elevated C storage was driven by blue C-forming plant invaders (saltmarsh grasses, seagrasses, and mangrove trees) that intensify biomass per unit area, extend and elevate coastal wetlands, and convert coastal mudflats into C-rich vegetated habitat. Introduced animal and structurally distinct primary producers had significant negative effects on C pools, driven by herbivory, trampling, and native species displacement. The role of invasion manifested differently among habitat types, with significant C storage increases in saltmarshes, decreases in seagrass, and no significant effect in mangroves. There were also counter-directional effects by the same species in different systems or locations, which underscores the importance of combining data mining with analyses of mean effect sizes in meta-analyses. Our study provides a quantitative basis for understanding differential effects of invasion on blue C habitats and will inform conservation strategies that need to balance management decisions involving invasion, C storage, and a range of other marine biodiversity and habitat functions in these coastal systems.

The ambivert: A failed attempt at a normal personality.

Recently, attention has been drawn toward an overlooked and nearly forgotten personality type: the ambivert. This paper presents a genealogy of the ambivert, locating the various contexts it traversed in order to highlight the ways in which these places and times have interacted and changed-ultimately elucidating our current situation. Proposed by Edmund S. Conklin in 1923, the ambivert only was meant for normal persons in between the introvert and extravert extremes. Although the ambivert could have been taken up by early personality psychologists who were transitioning from the study of the abnormal to the normal, it largely failed to gain traction. Whether among psychoanalysts, psychiatrists, or applied and personality psychologists, the ambivert was personality non grata. It was only within the context of Eysenck's integrative view of types and traits that the ambivert marginally persisted up to the present day and is now the focus of sales management and popular psychology.

Mini-review: Assessing the drivers of ship biofouling management--aligning industry and biosecurity goals.

Biofouling exerts a frictional and cost penalty on ships and is a direct cause of invasion by marine species. These negative consequences provide a unifying purpose for the maritime industry and biosecurity managers to prevent biofouling accumulation and transfer, but important gaps exist between these sectors. This mini-review examines the approach to assessments of ship biofouling among sectors (industry, biosecurity and marine science) and the implications for existing and emerging management of biofouling. The primary distinctions between industry and biosecurity in assessment of vessels biofouling revolve around the resolution of biological information collected and the specific wetted surface areas of primary concern to each sector. The morphological characteristics of biofouling and their effects on propulsion dynamics are of primary concern to industry, with an almost exclusive focus on the vertical sides and flat bottom of hulls and an emphasis on antifouling and operational performance. In contrast, the identity, biogeography, and ecology of translocated organisms is of highest concern to invasion researchers and biosecurity managers and policymakers, especially as it relates to species with known histories of invasion elsewhere. Current management practices often provide adequate, although not complete, provision for hull surfaces, but niche areas are well known to enhance biosecurity risk. As regulations to prevent invasions emerge in this arena, there is a growing opportunity for industry, biosecurity and academic stakeholders to collaborate and harmonize efforts to assess and manage biofouling of ships that should lead to more comprehensive biofouling solutions that promote industry goals while reducing biosecurity risk and greenhouse gas emissions.

Microlens Hollow-Core Fiber Probes for Operando Raman Spectroscopy.

We introduce a flexible microscale all-fiber-optic Raman probe which can be embedded into devices to enable operando in situ spectroscopy. The facile-constructed probe is composed of a nested antiresonant nodeless hollow-core fiber combined with an integrated high refractive index barium titanate microlens. Pump laser 785 nm excitation and near-infrared collection are independently characterized, demonstrating an excitation spot of full-width-half-maximum 1.1 µm. Since this is much smaller than the effective collection area, it has the greatest influence on the collected Raman scattering. Our characterization scheme provides a suitable protocol for testing the efficacy of these fiber probes using various combinations of fiber types and microspheres. Raman measurements on a surface-enhanced Raman spectroscopy sample and a copper battery electrode demonstrate the viability of the fiber probe as an alternative to bulk optic Raman microscopes, giving comparable collection to a 10 objective, thus paving the way for operando Raman studies in applications such as lithium battery monitoring.