DNA-protein interactions explored by atomic force microscopy.

DNA-protein interactions play an important role in all living organisms on Earth. The advent of atomic force microscopy permitted for the first time to follow and to characterize interaction forces between these two molecular species. After a short description of the AFM and its imaging modes we review, in a chronological order some of the studies that we think importantly contributed to the field.

AFM contribution to unveil pro- and eukaryotic cell mechanical properties.

Atomic force microscopy is nowadays a well-established technique that permits the investigation of numerous parameters of living matter. In particular, it allows the exploration of the mechanical properties of living organisms in almost physiological conditions. Here, we focus on the use of this technology to review recent contributions that relates the physiology and pathology of bacteria, yeast, plant and mammalian cells to their nano-mechanical properties.

A Rapid Unraveling of the Activity and Antibiotic Susceptibility of Mycobacteria.

The development of antibiotic-resistant bacteria is a worldwide health-related emergency that calls for new tools to study the bacterial metabolism and to obtain fast diagnoses. Indeed, the conventional analysis time scale is too long and affects our ability to fight infections. Slowly growing bacteria represent a bigger challenge, since their analysis may require up to months. Among these bacteria, Mycobacterium tuberculosis, the causative agent of tuberculosis, has caused more than 10 million new cases and 1.7 million deaths in 2016 only. We employed a particularly powerful nanomechanical oscillator, the nanomotion sensor, to characterize rapidly and in real time tuberculous and nontuberculous bacterial species, Mycobacterium bovis bacillus Calmette-Guérin and Mycobacterium abscessus, respectively, exposed to different antibiotics. Here, we show how high-speed and high-sensitivity detectors, the nanomotion sensors, can provide a rapid and reliable analysis of different mycobacterial species, obtaining qualitative and quantitative information on their responses to different drugs. This is the first application of the technique to tackle the urgent medical issue of mycobacterial infections, evaluating the dynamic response of bacteria to different antimicrobial families and the role of the replication rate in the resulting nanomotion pattern. In addition to a fast analysis, which could massively benefit patients and the overall health care system, we investigated the real-time responses of the bacteria to extract unique information on the bacterial mechanisms triggered in response to antibacterial pressure, with consequences both at the clinical level and at the microbiological level.

Single molecule fluorescence resonance energy transfer scanning near-field optical microscopy: potentials and challenges.

A few years ago, single molecule Fluorescence Resonance Energy Transfer Scanning Near-Field Optical Microscope (FRET SNOM) images were demonstrated using CdSe semiconductor nanocrystal-dye molecules as donor-acceptor pairs. Corresponding experiments reveal the necessity to exploit much more photostable fluorescent centers for such an imaging technique to become a practically used tool. Here we report the results of our experiments attempting to use nitrogen vacancy (NV) color centers in nanodiamond (ND) crystals, which are claimed to be extremely photostable, for FRET SNOM. All attempts were unsuccessful, and as a plausible explanation we propose the absence (instability) of NV centers lying close enough to the ND border. We also report improvements in SNOM construction that are necessary for single molecule FRET SNOM imaging. In particular, we present the first topographical images of single strand DNA molecules obtained with fiber-based SNOM. The prospects of using rare earth ions in crystals, which are known to be extremely photostable, for single molecule FRET SNOM at room temperature and quantum informatics at liquid helium temperatures, where FRET is a coherent process, are also discussed.

Combination of fluorescence microscopy and nanomotion detection to characterize bacteria.

Antibiotic-resistant pathogens are a major health concern in everyday clinical practice. Because their detection by conventional microbial techniques requires minimally 24 h, some of us have recently introduced a nanomechanical sensor, which can reveal motion at the nanoscale. By monitoring the fluctuations of the sensor, this technique can evidence the presence of bacteria and their susceptibility to antibiotics in less than 1 h. Their amplitude correlates to the metabolism of the bacteria and is a powerful tool to characterize these microorganisms at low densities. This technique is new and calls for an effort to optimize its protocol and determine its limits. Indeed, many questions remain unanswered, such as the detection limits or the correlation between the bacterial distribution on the sensor and the detection's output. In this work, we couple fluorescence microscopy to the nanomotion investigation to determine the optimal experimental protocols and to highlight the effect of the different bacterial distributions on the sensor.

Stiffness tomography exploration of living and fixed macrophages.

Stiffness tomography is a new atomic force microscopy imaging technique that allows highlighting structures located underneath the surface of the sample. In this imaging mode, such structures are identified by investigating their mechanical properties. We present here, for the first time, a description of the use of this technique to acquire detailed stiffness maps of fixed and living macrophages. Indeed, the mechanical properties of several macrophages were studied through stiffness tomography imaging, allowing some insight of the structures lying below the cell's surface. Through these investigations, we were able to evidence the presence and properties of stiff column-like features located underneath the cell membrane. To our knowledge, this is the first evidence of the presence, underneath the cell membrane, of such stiff features, which are in dimension and form compatible with phagosomes. Moreover, by exposing the cells to cytochalasin, we were able to study the induced modifications, obtaining an indication of the location and mechanical properties of the actin cytoskeleton.

Effect of antibiotics on mechanical properties of Bordetella pertussis examined by atomic force microscopy.

In recent years, the coevolution of microorganisms with current antibiotics has increased the mechanisms of bacterial resistance, generating a major health problem worldwide. Bordetella pertussis is a bacterium that causes whooping cough and is capable of adopting different states of virulence, i.e. virulent or avirulent states. In this study, we explored the nanomechanical properties of both virulent and avirulent B. pertussis as exposed to various antibiotics. The nanomechanical studies highlighted that only virulent B. pertussis cells undergo a decrease in their cell elastic modulus and height upon antimicrobial exposure, whereas their avirulent counterparts remain unaffected. This study also permitted to highlight different mechanical properties of individual cells as compared to those growing in close contact with other individuals. In addition, we analyzed the presence on the bacterial cell wall of Filamentous hemagglutinin adhesin (FHA), the major attachment factor produced by virulent Bordetella spp., under different virulence conditions by Force Spectroscopy.

Nonkinetic modeling of the mechanical unfolding of multimodular proteins: theory and experiments.

We introduce and discuss a novel approach called back-calculation for analyzing force spectroscopy experiments on multimodular proteins. The relationship between the histograms of the unfolding forces for different peaks, corresponding to a different number of not-yet-unfolded protein modules, is exploited in such a manner that the sole distribution of the forces for one unfolding peak can be used to predict the unfolding forces for other peaks. The scheme is based on a bootstrap prediction method and does not rely on any specific kinetic model for multimodular unfolding. It is tested and validated in both theoretical/computational contexts (based on stochastic simulations) and atomic force microscopy experiments on (GB1)(8) multimodular protein constructs. The prediction accuracy is so high that the predicted average unfolding forces corresponding to each peak for the GB1 construct are within only 5 pN of the averaged directly-measured values. Experimental data are also used to illustrate how the limitations of standard kinetic models can be aptly circumvented by the proposed approach.

Conformation of ring polymers in 2D constrained environments.

The combination of ring closure and spatial constraints has a fundamental effect on the statistics of semiflexible polymers such as DNA. However, studies of the interplay between circularity and constraints are scarce and single-molecule experimental data concerning polymer conformations are missing. By means of atomic force microscopy we probe the conformation of circular DNA molecules in two dimensions and in the concentrated regime (above the overlap concentration c*). Molecules in this regime experience a collapse, and their statistical properties agree very well with those of simulated vesicles under pressure. Some circular molecules also create confining regions in which other molecules are trapped. Thus we show further that spatially confined molecules fold into specific conformations close to those found for linear chains, and strongly dependent on the size of the confining box.

Force spectroscopy of barnase-barstar single molecule interaction.

Results of the single molecule force spectroscopy study of specific interactions between ribonuclease barnase and its inhibitor barstar are presented. Experimental data obtained for the force loading rate ranging 2-70 nN/s are well approximated by a single straight line, from which the dissociation barrier of the width of 0.12 nm and height of 0.75-0.85 × 10(-19)J can be inferred. The measured value of specific interaction does not depend on the NaCl concentration. This apparently contradicts the well-known dependence of the binding energy of this pair on the salt concentration, but such a "contradiction" is explained by the insensitivity of the force spectroscopy data to the relatively long-range electrostatic interaction. The latter essentially contributes to the value of barnase-barstar binding energy revealed by biochemical measurements, and it is exactly this electrostatic interaction which is influenced by the salt concentration.

Characterization of glycoprotein E C-end of West Nile virus and evaluation of its interaction force with alphaVbeta3 integrin as putative cellular receptor.

Recombinant polypeptide containing the 260-466 amino acid sequence of West Nile virus (WNV) strain LEIV-Vlg99-27889-human glycoprotein E (gpE, E(260-466)) was constructed. Immunochemical similarity between the E(260-466) and gpE of WNV was proven by enzyme immunoassay (EIA), immunoblot, competitive EIA, hemagglutination inhibition, and neutralization tests using polyclonal and monoclonal antibodies against the viral gpE and recombinant E(260-466). Polypeptide E(260-466) induced formation of virus neutralizing and cross-reactive antibodies that were interactive with various epitopes of this recombinant protein. It is shown by evaluation of the interaction of E(260-466) with one of the proposed cell receptors of WNV that average E(260-466)-alphaVbeta3 integrin-specific interaction force measured using atomic force spectroscopy was 80 and 140 pN for single and double interactions, correspondingly. Taken together with previously described interaction between laminin-binding protein (LBP) and WNV gpE domain II, it is proposed that WNV gpE can interact specifically with two cellular proteins (LBP and alphaVbeta3 integrin) during virus entry.

Intracellular nanomanipulation by a photonic-force microscope with real-time acquisition of a 3D stiffness matrix.

A traditional photonic-force microscope (PFM) results in huge sets of data, which requires tedious numerical analysis. In this paper, we propose instead an analog signal processor to attain real-time capabilities while retaining the richness of the traditional PFM data. Our system is devoted to intracellular measurements and is fully interactive through the use of a haptic joystick. Using our specialized analog hardware along with a dedicated algorithm, we can extract the full 3D stiffness matrix of the optical trap in real time, including the off-diagonal cross-terms. Our system is also capable of simultaneously recording data for subsequent offline analysis. This allows us to check that a good correlation exists between the classical analysis of stiffness and our real-time measurements. We monitor the PFM beads using an optical microscope. The force-feedback mechanism of the haptic joystick helps us in interactively guiding the bead inside living cells and collecting information from its (possibly anisotropic) environment. The instantaneous stiffness measurements are also displayed in real time on a graphical user interface. The whole system has been built and is operational; here we present early results that confirm the consistency of the real-time measurements with offline computations.

Nanomotion detection based on atomic force microscopy cantilevers.

Atomic force microscopes (AFM) or low-noise in-house dedicated devices can highlight nanomotion oscillations. The method consists of attaching the organism of interest onto a silicon-based sensor and following its nano-scale motion as a function of time. The nanometric scale oscillations exerted by biological specimens last as long the organism is viable and reflect the status of the microorganism metabolism upon exposure to different chemical or physical stimuli. During the last couple of years, the nanomotion pattern of several types of bacteria, yeasts and mammalian cells has been determined. This article reviews this technique in details, presents results obtained with dozens of different microorganisms and discusses the potential applications of nanomotion in fundamental research, medical microbiology and space exploration.

Scanning near-field optical microscope based on a double resonant fibre probe montage and equipped with time-gated photon detection.

We discuss scanning near-field optical microscope based on original double resonant montage of a fibre probe onto the tuning fork and proprietary electronics capable of fast and precise measurements of the resonant frequency and the quality factor of sensor dithering. Special emphasis is given on the pulsed excitation/gated detection of optical signal. This option as well as the possibility of fast scanning facilitates a lot the problem of single fluorescence centres detection. To illustrate the performance of this microscope, we present first true single-molecule fluorescence resonance energy transfer scanning near-field optical microscope images of single CdSe nanocrystals on glass slide surface and observation of an optical 'pseudoresolution' of densely packed 100-nm-diameter transfluorescent spheres in noisy conditions.

Covalent attachment of proteins to calcite surface for the single molecule experiments.

Two protocols of covalent attachment of proteins onto the calcite surface, viz. one using the metallochelat and second using the aminohexil, are elaborated. Single molecule force spectroscopy method has been used to test their efficiency and practical applicability. Experiments were performed measuring the specific interaction force between bovine serum albumin (BSA) fixed onto the freshly cleaved calcite single crystal surface (procedure under the study here) and its polyclonal antibody (Ab-BSA) immobilized onto an AFM tip using standard and well studied procedure. We found the conditions, when up to 3-3.5% of tip-sample approaches lead to the formation of a single specific bond.

True Tapping Mode Scanning Near-Field Optical Microscopy with Bent Glass Fiber Probes.

In scanning near-field optical microscopy, the most popular probes are made of sharpened glass fiber attached to a quartz tuning fork (TF) and exploiting the shear force-based feedback. The use of tapping mode feedback could be preferable. Such an approach can be realized, for example, using bent fiber probes. Detailed analysis of fiber vibration modes shows that realization of truly tapping mode of the probe dithering requires an extreme caution. In case of using the second resonance mode, probes vibrate mostly in shear force mode unless the bending radius is rather small (ca. 0.3 mm) and the probe's tip is short. Otherwise, the shear force character of the dithering persists. Probes having these characteristics were prepared by irradiation of a tapered etched glass fiber with a CW CO2 laser. These probes were attached to the TF in double resonance conditions which enables achieving significant quality factor (4000-6000) of the TF + probe system (Cherkun et al., 2006). We also show that, to achieve a truly tapping character, dithering, short, and not exceeding 3 mm lengths of a freestanding part of bent fiber probe beam should also be used in the case of nonresonant excitation.

Erythrocyte's aging in microgravity highlights how environmental stimuli shape metabolism and morphology.

The determination of the function of cells in zero-gravity conditions is a subject of interest in many different research fields. Due to their metabolic unicity, the characterization of the behaviour of erythrocytes maintained in prolonged microgravity conditions is of particular importance. Here, we used a 3D-clinostat to assess the microgravity-induced modifications of the structure and function of these cells, by investigating how they translate these peculiar mechanical stimuli into modifications, with potential clinical interest, of the biochemical pathways and the aging processes. We compared the erythrocyte's structural parameters and selected metabolic indicators that are characteristic of the aging in microgravity and standard static incubation conditions. The results suggest that, at first, human erythrocytes react to external stimuli by adapting their metabolic patterns and the rate of consumption of the cell resources. On longer timeframes, the cells translate even small differences in the environment mechanical solicitations into structural and morphologic features, leading to distinctive morphological patterns of aging.

Characterization of MAP1B heavy chain interaction with actin.

Microtubule-associated protein 1B is an essential protein during brain development and neurite outgrowth and was studied by several assays to further characterize actin as a major interacting partner. Tubulin and actin co-immunoprecipitated with MAP1B at similar ratios throughout development. Their identity was identified by mass spectrometry and was confirmed by Western blots. In contrast to previous reports, the MAP1B-actin interaction was not dependent on the MAP1B phosphorylation state, since actin was precipitated from brain tissue throughout development at similar ratios and equal amounts were precipitated before and after dephosphorylation with alkaline phosphatase. MAP1B heavy chain was able to bind actin directly and therefore the N-terminal part of MAP1B heavy chain must also contain an actin-binding site. The binding force of this interaction was measured by atomic force microscopy and values were in the same range as those of MAP1B binding to tubulin or that measured in MAP1B self-aggregation. Aggregation was confirmed by negative staining and electron microscopy. Experiments including COS-7 cells, PC12 cells, cytochalasin D and immunocytochemistry with subsequent confocal laser microscopy, suggested that MAP1B may bind to actin but has no obvious microfilament stabilizing effect. We conclude, that the MAP1B heavy chain has a microtubule-stabilization effect, and contains an actin-binding site that may play a role in the crosslinking of actin and microtubules, a function that may be important in neurite elongation.

Force-clamp spectroscopy with a small dithering of AFM tip, and its application to explore the energy landscape of single avidin-biotin complex.

We have recently developed a new method for directly measuring the spring constant of single molecules and molecular complexes on a real-time basis [L.A. Chtcheglova, G.T. Shubeita, S.K. Sekatskii, G. Dietler, Biophys. J. 86 (2004) 1177]. The technique combines standard force spectroscopy with a small dithering of tip. Changes in the amplitude of the oscillations are measured as a function of the pulling-off force to yield the spring constant of the complex. In this report, we present the first results of combination of this approach with the force-clamp spectroscopy. The standard atomic-force microscope has been supplemented with an electronic unit, which is capable of realizing an arbitrary force function, and permits the force-loading regime to be interrupted at any time. Using this method, the time needed to rupture a single bond can be measured as a function of the force that is required to maintain the complex in a stretched condition. The energy landscape of the avidin-biotin complex is explored and discussed.

Nanomechanical sensor applied to blood culture pellets: a fast approach to determine the antibiotic susceptibility against agents of bloodstream infections.

OBJECTIVES: The management of bloodstream infection, a life-threatening disease, largely relies on early detection of infecting microorganisms and accurate determination of their antibiotic susceptibility to reduce both mortality and morbidity. Recently we developed a new technique based on atomic force microscopy capable of detecting movements of biologic samples at the nanoscale. Such sensor is able to monitor the response of bacteria to antibiotic's pressure, allowing a fast and versatile susceptibility test. Furthermore, rapid preparation of a bacterial pellet from a positive blood culture can improve downstream characterization of the recovered pathogen as a result of the increased bacterial concentration obtained. METHODS: Using artificially inoculated blood cultures, we combined these two innovative procedures and validated them in double-blind experiments to determine the susceptibility and resistance of Escherichia coli strains (ATCC 25933 as susceptible and a characterized clinical isolate as resistant strain) towards a selection of antibiotics commonly used in clinical settings. RESULTS: On the basis of the variance of the sensor movements, we were able to positively discriminate the resistant from the susceptible E. coli strains in 16 of 17 blindly investigated cases. Furthermore, we defined a variance change threshold of 60% that discriminates susceptible from resistant strains. CONCLUSIONS: By combining the nanomotion sensor with the rapid preparation method of blood culture pellets, we obtained an innovative, rapid and relatively accurate method for antibiotic susceptibility test directly from positive blood culture bottles, without the need for bacterial subculture.