Effective Differentiation of Induced Pluripotent Stem Cells Into Dental Cells.

BACKGROUND: A biotooth is defined as a complete living tooth, made in laboratory cultures from a spontaneous interplay between epithelial and mesenchymal cell-based frontal systems. A good solution to these problems is to use induced pluripotent stem cells (iPSCs). However, no one has yet formulated culture conditions that effectively differentiate iPSCs into dental epithelial and dental mesenchymal cells phenotypes analogous to those present in tooth development. RESULTS: Here, we tried to induce differentiation methods for dental epithelial cells (DEC) and dental mesenchymal cells from iPSCs. For the DEC differentiation, the conditional media of SF2 DEC was adjusted to embryoid body. Moreover, we now report on a new cultivation protocol, supported by transwell membrane cell culture that make it possible to differentiate iPSCs into dental epithelial and mesenchymal cells with abilities to initiate the first stages in de novo tooth formation. CONCLUSIONS: Implementation of technical modifications to the protocol that maximize the number and rate of iPSC differentiation, into mesenchymal and epithelial cell layers, will be the next step toward growing an anatomically accurate biomimetic tooth organ. Developmental Dynamics 248:129-139, 2019. © 2018 Wiley Periodicals, Inc.

Cell cycle of the enamel knot during tooth morphogenesis.

Enamel knot (EK) is known to be a central organ in tooth development, especially for cusp patterning. To trace the exact position and movement among the inner dental epithelium (IDE) and EK cells, and to monitor the relationship between the EK and cusp patterning, it is essential that we understand the cell cycle status of the EK in early stages of tooth development. In this study, thymidine analogous (IdU, BrdU) staining was used to evaluate the cell cycle phase of the primary EK at the early casp stage (E13.0) and the gerbil embryo (E19) in a developing mouse embryo. The centerpiece of this study was to describe the cell cycle phasing and sequencing during proliferation in the IDE according to the expression of IdU and BrdU following their injection at calculated time points. The interval time between IdU injection and BrdU injection was set at 4 h. As a result, the cell cycle in the IDE of the mouse and gerbil was found to be synchronous. Conversely, the cell cycle in primary EKs of mice was much longer than that of the IDE. Therefore, the difference of cell cycle of the IDE and the EK is related to the diversity of cusp patterning and would provide a new insight into tooth morphogenesis.

Synthetic tissue engineering with smart, cytomimetic protocells.

Synthetic protocells are rudimentary origin-of-life versions of natural cell counterparts. Protocells are widely engineered to advance efforts and useful accepted outcomes in synthetic biology, soft matter chemistry and bioinspired materials chemistry. Protocells in collective symbiosis generate synthetic proto-tissues that display unprecedented autonomy and yield advanced materials with desirable life-like features for smart multi-drug delivery, micro bioreactors, renewable fuel production, environmental clean-up, and medicine. Current levels of protocell and proto-tissue functionality and adaptivity are just sufficient to apply them in tissue engineering and regenerative medicine, where they animate biomaterials and increase therapeutic cell productivity. As of now, structural biomaterials for tissue engineering lack the properties of living biomaterials such as self-repair, stochasticity, cell synergy and the sequencing of molecular and cellular events. Future protocell-based biomaterials provide these core properties of living organisms, but excluding evolution. Most importantly, protocells are programmable for a broad array of cell functions and behaviors and collectively in consortia are tunable for multivariate functions. Inspired by upcoming designs of smart protocells, we review their developmental background and cover the most recently reported developments in this promising field of synthetic proto-biology. Our emphasis is on manufacturing proto-tissues for tissue engineering of organoids, stem cell niches and reprogramming and tissue formation through stages of embryonic development. We also highlight the exciting reported developments arising from fusing living cells and tissues, in a valuable hybrid symbiosis, with synthetic counterparts to bring about novel functions, and living tissue products for a new synthetic tissue engineering discipline.

Developing palatal bone using human mesenchymal stem cell and stem cells from exfoliated deciduous teeth cell sheets.

Cleft palate is one of the most common craniofacial defects in newborn babies. The characteristics of this genetic disease produce soft and hard tissue defects on the lip and maxilla, which cause not only aesthetic but also functional problems with speech, eating, and breathing. Bone grafts using autologous cancellous bone have been a standard treatment to repair the hard tissue defect in cleft palates. However, such grafts do not fully integrate into host bone and undergo resorption. To overcome engraftment problems, it is common to engineer new tissues with a combination of multipotent cells and biomaterial frameworks. Here, we manufactured cell sheets for bone repair of cleft palates derived from two osteogenic cell sources, human mesenchymal stem cells (hMSCs) and stem cells from human exfoliated deciduous teeth (SHEDs). Cell sheets made from hMSCs and SHEDs gave rise to in vitro calcification, which indicated the osteogenic potential of these cells. The cell sheets of hMSCs and SHEDs expressed the bone-specific osteogenic markers, osterix, osteocalcin, and osteopontin, following insertion into ex vivo-cultured embryonic palatal shelves and in ovo culture. In conclusion, we showed that osteogenic stem cell sheets have mineralization potential and might represent a new alternative to autologous bone transplantation in the reconstruction of cleft palates.

Mineralized Polysaccharide Transplantation Modules Supporting Human MSC Conversion into Osteogenic Cells and Osteoid Tissue in a Non-Union Defect.

Regenerative orthopedics needs significant devices to transplant human stem cells into damaged tissue and encourage automatic growth into replacements suitable for the human skeleton. Soft biomaterials have similarities in mechanical, structural and architectural properties to natural extracellular matrix (ECM), but often lack essential ECM molecules and signals. Here we engineer mineralized polysaccharide beads to transform MSCs into osteogenic cells and osteoid tissue for transplantation. Bone morphogenic proteins (BMP-2) and indispensable ECM proteins both directed differentiation inside alginate beads. Laminin and collagen IV basement membrane matrix proteins fixed and organized MSCs onto the alginate matrix, and BMP-2 drove differentiation, osteoid tissue self-assembly, and small-scale mineralization. Augmentation of alginate is necessary, and we showed that a few rationally selected small proteins from the basement membrane (BM) compartment of the ECM were sufficient to upregulate cell expression of Runx-2 and osteocalcin for osteoid formation, resulting in Alizarin red-positive mineral nodules. More significantly, nested BMP-2 and BM beads added to a non-union skull defect, self-generated osteoid expressing osteopontin (OPN) and osteocalcin (OCN) in a chain along the defect, at only four weeks, establishing a framework for complete regeneration expected in 6 and 12 weeks. Alginate beads are beneficial surgical devices for transplanting therapeutic cells in programmed (by the ECM components and alginate-chitosan properties) reaction environments ideal for promoting bone tissue.

Comparison of biofilm formation and migration of Streptococcus mutans on tooth roots and titanium miniscrews.

Periodontitis and peri-implantitis are inflammatory diseases caused by periodontal pathogenic bacteria leading to destruction of supporting periodontal/peri-implant tissue. However, the progression of inflammatory process of these two diseases is different. The bacterial biofilm is the source of bacteria during the inflammatory process. As the bacteria migrate down the surface of tooth or titanium implant, the inflammation spreads along with it. Streptococcus mutans has an important role in oral bacterial biofilm formation in early stage biofilm before the microbiota shift to late stage and become more virulent. The other major difference is the existence of periodontal ligament (PDL) cells in normal teeth but not in peri-implant tissue. This study aims to compare the S. mutans bacterial biofilm formation and migration on 2 different surfaces, tooth root and titanium miniscrew. The biofilm was grown with a flow cells system to imitate the oral dynamic system with PDL cells. The migration distances were measured, and the biofilm morphology was observed. Data showed that the biofilm formation on miniscrew was slower than those on tooth root at 24 hr. However, there were no difference in the morphology of the biofilm formed on the tooth root with those formed on the miniscrew at both 24 and 48 hr. The biofilm migration rate was significantly faster on miniscrew surface compare with those on tooth root when observe at 48 hr (p < .001). There are no significant differences in biofilm migration within miniscrew group and tooth root group despite the exiting of PDL cell (p > .05). The biofilm's migration rate differences on various surfaces could be one of the factors accounting for the different inflammatory progression between periodontitis and peri-implantitis disease.

Mineralized Polysaccharide Transplantation Modules Supporting Human MSC Conversion into Osteogenic Cells and Osteoid Tissue in a Non-Union Defect.

Regenerative orthopedics needs significant devices to transplant human stem cells into damaged tissue and encourage automatic growth into replacements suitable for the human skeleton. Soft biomaterials have similarities in mechanical, structural and architectural properties to natural extracellular matrix (ECM), but often lack essential ECM molecules and signals. Here we engineer mineralized polysaccharide beads to transform MSCs into osteogenic cells and osteoid tissue for transplantation. Bone morphogenic proteins (BMP-2) and indispensable ECM proteins both directed differentiation inside alginate beads. Laminin and collagen IV basement membrane matrix proteins fixed and organized MSCs onto the alginate matrix, and BMP-2 drove differentiation, osteoid tissue self-assembly, and small-scale mineralization. Augmentation of alginate is necessary, and we showed that a few rationally selected small proteins from the basement membrane (BM) compartment of the ECM were sufficient to upregulate cell expression of Runx-2 and osteocalcin for osteoid formation, resulting in Alizarin red-positive mineral nodules. More significantly, nested BMP-2 and BM beads added to a non-union skull defect, self-generated osteoid expressing osteopontin (OPN) and osteocalcin (OCN) in a chain along the defect, at only four weeks, establishing a framework for complete regeneration expected in 6 and 12 weeks. Alginate beads are beneficial surgical devices for transplanting therapeutic cells in programmed (by the ECM components and alginate-chitosan properties) reaction environments ideal for promoting bone tissue.

High Quality Bioreplication of Intricate Nanostructures from a Fragile Gecko Skin Surface with Bactericidal Properties.

The external epithelial surfaces of plants and animals are frequently carpeted with small micro- and nanostructures, which broadens their adaptive capabilities in challenging physical habitats. Hairs and other shaped protuberances manage with excessive water, light contaminants, predators or parasites in innovative ways. We are interested in transferring these intricate architectures onto biomedical devices and daily-life surfaces. Such a project requires a very rapid and accurate small-scale fabrication process not involving lithography. In this study, we describe a simple benchtop biotemplating method using shed gecko lizard skin that generates duplicates that closely replicate the small nanotipped hairs (spinules) that cover the original skin. Synthetic replication of the spinule arrays in popular biomaterials closely matched the natural spinules in length. More significantly, the shape, curvature and nanotips of the synthetic arrays are virtually identical to the natural ones. Despite some small differences, the synthetic gecko skin surface resisted wetting and bacterial contamination at the same level as natural shed skin templates. Such synthetic gecko skin surfaces are excellent platforms to test for bacterial control in clinical settings. We envision testing the biocidal properties of the well-matched templates for fungal spores and viral resistance in biomedicine as well as co/multi-cultures.

Stimulation of EphB2/ephrin-B1 signalling by tumour necrosis factor alpha in human dental pulp stem cells.

OBJECTIVES: The aim of this study was to investigate whether in vitro stimulation of dental pulp stem cells (DPSCs) by tumour necrosis factor alpha (TNF-α) would induce secretion of EphB2/ephrin-B1 signalling. MATERIALS AND METHODS: Dental pulp stem cells isolated from human dental pulp were treated with TNF-α (5-100 ng/ml) over 2-48 h. EphB2/ephrin-B1 mRNA and protein levels were measured by real-time polymerase chain reaction (RT-PCR) and western blot analysis respectively. Additionally, DPSCs were pre-incubated with TNF-α receptor neutralizing antibodies or infected with nuclear factor-kappa B (NF-ĸB) inhibitor, p38 MAPK inhibitor, Jun N-terminal kinase (JNK) inhibitor and MEK inhibitor before TNF-α treatment. Results were analysed by one-way ANOVA. RESULTS: Tumour necrosis factor alpha increased EphB2 mRNA expression in DPSCs at concentrations up to 20 ng/ml and ephrin-B1 at concentrations up to 40 ng/ml (P < 0.05). Its mRNA expression reached maximum at 24 h when treated with TNF-α at 20 ng/ml (P < 0.05). EphB2/ephrin-B1 protein expression levels were high at 16 and 24 h as shown by western blotting. Neutralizing antibodies for TNFR1/2 receptors down-regulated EphB2/ephrin-B1 mRNA expression (P < 0.05) and ephrin-B1 protein expression, but not EphB2 protein expression. JNK-inhibitor inhibited EphB2 mRNA expression only (P < 0.05). CONCLUSIONS: EphB2/ephrin-B1 were invoked in DPSCs with TNF-α treatment via the JNK-dependent pathway, but not NF-ĸB, p38 MAPK or MEK signalling.

Coculture of stem cells from apical papilla and human umbilical vein endothelial cell under hypoxia increases the formation of three-dimensional vessel-like structures in vitro.

The success of bioengineered dental pulp depends on two principles, (1) whether the transplanted tissue can develop its own vascular endothelial tubule network and (2) whether the host vasculature can be induced to penetrate the bioengineered pulp replacement and conjoin. Major inductive molecules that participate in laying down blood vessels include vascular endothelial growth factor (VEGF), ephrinB2, and hypoxia-inducible factor 1α (HIF-1α). Being able to modulate the genes encoding these angiogenic molecules is a therapeutic target in pulp regeneration for endogenous blood vessel formation, prevention of graft rejection, and exclusion of infection. Once implanted inside the root canal, bioengineered pulp is subjected to severe hypoxia that causes tissue degeneration. However, short-term hypoxia is known to stimulate angiogenesis. Thus, it may be feasible to prime dental cells for angiogenic activity before implantation. Stem cells from apical papilla (SCAP) are arguably one of the most potent and versatile dental stem cell populations for bioengineering pulp in vitro. Our study aimed to investigate whether coculture of SCAP and human umbilical vein endothelial cells (HUVECs) under hypoxia promotes the formation of endothelial tubules and a blood vessel network. In addition, we clarified the interplay between the genes that orchestrate these important angiogenic molecules in SCAP under hypoxic conditions. We found that SCAP cocultured with HUVEC at a 1:5 ratio increased the number of endothelial tubules, tubule lengths, and branching points. Fluorescence staining showed that HUVEC formed the trunk of tubular structures, whereas SCAP located adjacent to the endothelial cell line, resembling the pericyte location. When we used CoCl2 (0.5 mM) to induce hypoxic environment, the expression of proteins, HIF-1α and VEGF, and transcript of ephrinB2 in SCAP was upregulated. However, minimal VEGF levels in supernatants of HUVEC and coculture Petri dishes were detected, suggesting that VEGF secreted by SCAP might be used by HUVEC to accelerate the formation of vessel-like structures. Taken together, we revealed that artificial hypoxia stimulates angiogenic responses in SCAP for possible use in engineering dental pulp replacements. Our results may help to delineate the optimal therapeutic target to promote angiogenesis so that future bioengineered pulp replacements integrate faster and permanently within the host.

Choice of Cell Source in Cell-Based Therapies for Retinal Damage due to Age-Related Macular Degeneration: A Review.

Background. Age-related macular degeneration (AMD) is a complex disorder that affects primarily the macula involving the retinal pigment epithelium (RPE) but also to a certain extent the photoreceptor layer and the retinal neurons. Cell transplantation is a promising option for AMD and clinical trials are underway using different cell types. Methods. We hypothesize that instead of focusing on a particular cell source for concurrent regeneration of all the retinal layers and also to prevent exhaustive research on an array of cell sources for regeneration of each layer, the choice should depend on, precisely, which layer is damaged. Results. Thus, for a damage limited to the retinal pigment epithelial (RPE) layer, the choice we suggest would be RPE cells. When the damage extends to rods and cones, the choice would be bone marrow stem cells and when retinal neurons are involved, relatively immature stem cell populations with an inherent capacity to yield neuronal lineage such as hematopoietic stem cells, embryonic stem cells, or induced pluripotent stem cells can be tried. Conclusion. This short review will prove to be a valuable guideline for those working on cell therapy for AMD to plan their future directions of research and therapy for this condition.

Language control in different contexts: the behavioral ecology of bilingual speakers.

This paper proposes that different experimental contexts (single or dual language contexts) permit different neural loci at which words in the target language can be selected. However, in order to develop a fuller understanding of the neural circuit mediating language control we need to consider the community context in which bilingual speakers typically use their two languages (the behavioral ecology of bilingual speakers). The contrast between speakers from code-switching and non-code-switching communities offers a way to increase our understanding of the cortical, subcortical and, in particular, cerebellar structures involved in language control. It will also help us identify the non-verbal behavioral correlates associated with these control processes.