Water coordinated zinc dioxo-chlorin and porphyrin self-assemblies as chlorosomal mimics: variability of supramolecular interactions.

Semisynthetic zinc chlorins are shown for the first time to self-assemble in the absence of an intrinsic hydroxy group, which is always present in the chlorosomal bacteriochlorophylls (BChl's) c, d and e. Instead, the presently studied compounds have carbonyl groups. These cannot function as hydrogen bond donating groups. However due to interspacing water molecules bound to the zinc ion, double hydrogen bonding can occur to adjacent tetrapyrrolic macrocycles equipped with carbonyl recognition groups. Solution studies comprising UV-Vis absorption, electronic circular dichroism (ECD) and FT-IR show that different aggregates are formed in hydrated solvents in comparison to dry nonpolar solvents. Single crystal X-ray studies show variable supramolecular interactions either with interspacing water molecules coordinating the Zn ion within a porphyrin or with the 17(2) carbonyl group of a chlorin ligating the Zn ion. Our findings have implications for a minimalistic design of self-assembling chromophores, which can act as efficient light-harvesting units.

Membrane protrusion coarsening and nanotubulation within giant unilamellar vesicles.

Hydrophobic side groups on a stimuli-responsive polymer, encapsulated within a single giant unilamellar vesicle, enable membrane attachment during compartment formation at elevated temperatures. We thermally modulated the vesicle through implementation of an IR laser via an optical fiber, enabling localized directed heating. Polymer-membrane interactions were monitored using confocal imaging techniques as subsequent membrane protrusions occurred and lipid nanotubes formed in response to the polymer hydrogel contraction. These nanotubes, bridging the vesicle membrane to the contracting hydrogel, were retained on the surface of the polymer compartment, where they were transformed into smaller vesicles in a process reminiscent of cellular endocytosis. This development of a synthetic vesicle system containing a stimuli-responsive polymer could lead to a new platform for studying inter/intramembrane transport through lipid nanotubes.

Label-free detection of enhanced saccharide binding at pH 7.4 to nanoparticulate benzoboroxole based receptor units.

Nanoparticles modified with either 6-amino-1-hydroxy-2,1-benzoxaborolane (3-aminobenzoboroxole) or 3-aminophenylboronic acid were prepared by nucleophilic substitution of a styrene-co-DVB-co-vinylbenzylchloride latex (25 nm). Isothermal titration calorimetry (ITC) was used as a label-free detection method for the analysis of the binding between monosaccharides and these two differently derivatized nanoparticle systems at pH 7.4. Because ITC reveals, thermodynamical parameters such as the changes in enthalpy ΔH, free energy ΔG, and entropy ΔS, possible explanations for the higher binding constants can be derived in terms of entropy and enthalpy changes. In case of the modified nanoparticles, the free energy of binding is dominated by the entropy term. This shows that interfacial effects, besides the intrinsic affinity, lead to a higher binding constant compared with the free ligand. The highest binding constant was found for fructose binding to the benzoboroxole modified nanoparticles: Its value of 1150 M(-1) is twice as high as for the free benzoboroxole and five times as high as with phenylboronic acid or 3-aminophenylboronic acid. In contrast to the binding of fructose to free boronic acids, which is an enthalpically driven process, the binding of fructose to the modified nanoparticles is dominated by the positive entropy term.

Ionic topochemical tuned biosensor interface.

Two new hydrophilic, poly(ethylene glycol) (PEG)-based redox copolymers bearing electrochemically active ferrocene (Fc) and thiol/disulfide anchoring functionalities were synthesized. These copolymers are shown to adsorb on gold surfaces causing polymeric self-assembled monolayers (pSAMs) that possess triple functions: "redox-active", "ionic-tunable", and "bio-inert". Both immobilized polymers showed redox potentials at +400 mV (Ag|AgCl), and facilitate the electrocatalytical oxidation of NADH. Additionally, interfacial architecture of the polymers is affected by an increase in Ca(2+) concentration, which leads to an amplification of the electrochemical response. The electrode current, measured for NADH-oxidation, increased by 80% after addition of 10 mM Ca(2+) ions. Considering the Ca(2+) influence on the heterogeneous electron transfer a structural model of the immobilized polymers is proposed based on the strong chelating ability of noncyclic PEG moieties.

Thermometric MIP sensor for fructosyl valine.

Interactions of molecularly imprinted polymers containing phenyl boronic acid residues with fructosyl valine, fructose and pinacol, respectively are analysed in aqueous solution (pH 11.4) by using a flow calorimeter. The reversible formation of (two) cyclic boronic acid diesters per fructosyl molecule generates a 40-fold higher exothermic signal as compared to the control polymer. Whereas binding of pinacol to either the MIP or the control polymer generates a very small endothermic signal reflecting a negligible contribution of the esterification to the overall process. An "apparent imprinting factor" of 41 is found which exceeds the respective value of batch binding procedures by a factor of 30. Furthermore, the MIP sensor was used to characterise the crossreactivity. The influence of shape selective molecular recognition is discussed.

Development of fructosyl valine binding polymers by covalent imprinting.

Molecularly imprinted polymers (MIPs) against fructosyl valine (Fru-Val), the N-terminal constituent of hemoglobin A1c beta-chains, were prepared by cross-linking of beta-D-Fru-Val-O-bis(4-vinylphenylboronate) with an excess of ethylene glycol dimethacrylate (EDMA) or trimethylolpropane trimethacrylate (TRIM). Control MIPs were prepared in analogy by cross-linking the corresponding vinylphenylboronate esters of fructose and pinacol. After template extraction batch rebinding studies were performed using different pH values and buffer compositions. The Fru-Val imprinted TRIM cross-linked polymer binds about 1.4 times more Fru-Val than the fructose imprinted polymer and 2.7 times more Fru-Val than pinacol imprinted polymer. The highest imprinting effect was obtained in 100 mM sodium carbonate/10% methanol (pH 11.4). The TRIM cross-linked Fru-Val imprinted polymer showed a better specificity than the EDMA cross-linked polymer. The binding of valine was very low. Thermo gravimetric analysis indicated that the generated Fru-Val imprinted polymer has high thermo stability. No change in binding was observed after incubation of the polymers in buffer at 80 degrees C for 36 h. Since the functional group of the polymers (phenyl boronic acid) targets the sugar part of Fru-Val the imprint technique used should also be applicable for the development of MIPs against other glycated amino acids and peptides.

Thirty years of haemoglobin electrochemistry.

Electrochemical investigations of the blood oxygen carrier protein include both mediated and direct electron transfer. The reaction of haemoglobin (Hb) with typical mediators, e.g., ferricyanide, can be quantified by measuring the produced ferrocyanide which is equivalent to the Hb concentration. Immobilization of the mediator within the electrode body allows reagentless electrochemical measuring of Hb. On the other hand, entrapment of the protein within layers of polyelectrolytes, lipids, nanoparticles of clay or gold leads to a fast heterogeneous electron exchange of the partially denatured Hb.

Fusion and planarization of a quinoidal porphyrin dimer.

The crystal structure, near-infrared spectrum and electrochemistry of a quinoidal triply-linked porphyrin dimer are compared with those of its singly-linked precursor; fusing the two porphyrins planarizes the pi-system and reduces the optical HOMO-LUMO gap while increasing the gap between the first oxidation and reduction potentials.

Preparation and characterization of novel molecularly imprinted polymers based on thiourea receptors for nitrocompounds recognition.

Molecularly imprinted polymers (MIPs) for the recognition of nitro derivatives are prepared from three different (thio)urea-bearing functional monomers. The binding capability of the polymers is characterized by a batch binding experiment. The imprinting factors and affinity constants (K) of the imprinted polymers exhibit the same tendency as the binding constants (K(a)) of the functional monomers to the target substance in solution. Not only nitrofurantoin is efficiently bound by these MIPs but also a broad spectrum of other nitro compounds is bound with at the intermediate level, addressing that these (thio)urea-based monomers can be utilized to prepare a family of MIPs for various nitro compounds, which can be applied as recognition elements in separation and analytical application.

Direct electrochemistry and spectroelectrochemistry of osmium substituted horseradish peroxidase.

In this contribution the substitution of the central protoporphyrin IX iron complex of horseradish peroxidase by the respective osmium porphyrin complex is described. The direct electrochemical reduction of the Os containing horseradish peroxidase (OsHRP) was achieved at ITO and modified glassy carbon electrodes and in combination with spectroscopy revealed the three redox couples Os(III)HRP/Os(IV)HRP, Os(IV)HRP/Os(V)HRP and Os(V)HRP/Os(VI)HRP. The midpoint potentials differ dependent on the electrode material used with E(1/2) (Os(III/IV)) of -0.4 V (ITO) and -0.25 V (GC), E(1/2) (Os(IV)/(V)) of -0.16 V (ITO) and +0.10 V (GC), and E(1/2) (Os(V/VI))of +0.18 V (ITO), respectively. Moreover, with immobilised OsHRP the direct electrocatalytic reduction of hydrogen peroxide and tert-butyl hydroperoxide was observed. In comparison to electrodes modified with native HRP the sensitivity of the OsHRP-electrode for tert-butyl hydroperoxide is higher.

Development of molecularly imprinted polymers for the binding of nitrofurantoin.

Novel molecularly imprinted polymers (MIPs) for the recognition of nitrofurantoin (NFT) were prepared by photoinitiated polymerisation in polar solvent using 2,6-bis(methacrylamido) pyridine (BMP) as the functional monomer and carboxyphenyl aminohydantoin (CPAH) as the analogue of the template. The binding constants of the complex between BMP and nitrofurantoin or CPAH in DMSO were determined with 1H NMR titration to be 630+/-104 and 830+/-146 M(-1), respectively. To study the influence of the functional monomer, two polymer compositions were prepared containing the template, the functional monomer and the crosslinker in the molar ratio 1:1:12 for MIP1 and 1:4:20 for MIP2, respectively. The imprinting factor at saturation concentration of nitrofurantoin, which is the ratio of the amount bound to the MIP and the non-imprinted control polymer (NIP), was determined to be 2.47 for MIP1 and 2.49 for MIP2. The cross reactivity of the imprinted polymers seems to be determined by the ability to form hydrogen bonds to the functional monomer while the shape of the molecule has no real influence.

pH-Triggered dethreading-rethreading and switching of cucurbit[6]uril on bistable [3]pseudorotaxanes and [3]rotaxanes.

A series of water-soluble [3]rotaxanes-(n+2) and [3]pseudorotaxanes-(n+2) with short (propyl, n=1) and long (dodecyl, n=10) aliphatic spacers have been prepared in high yields by a 1,3-dipolar cycloaddition reaction catalyzed by cucurbit[6]uril (CB6). The pH-triggered dethreading and rethreading of CB6 on these pseudorotaxanes was monitored by 1H NMR spectroscopy. A previously reported [3]rotaxane-12 that is known to behave as a bistable molecular switch has two recognition sites for CB6, that is, the diaminotriazole moieties and the dodecyl spacer. By changing the pH of the system, it is possible to observe more than one state in the shuttling process. At low pH values both CB6 units are located on the diaminotriazole moieties owing to an ion-dipole interaction, whereas at high pH values both of the CB6 units are located on the hydrophobic dodecyl spacer. Surprisingly, the CB6 units shuttle back to their initial state very slowly after reprotonation of the axle. Even after eighteen days at room temperature, only about 50 % of the CB6 units had relocated back onto the diaminotriazole moieties. The rate constants for the shuttling processes were measured as a function of temperature over the range from 313 to 333 K and the activation parameters (enthalpy, entropy, and free energy) were calculated by using the Eyring equation. The results indicate that this [3]rotaxane behaves as a kinetically controlled molecular switch. The switching properties of [3]rotaxane-3 have also been studied. However, even under extreme pH conditions this rotaxane has not shown any switching action, which confirms that the propyl spacer is too short to accommodate CB6 units.

Analysis of recognition of fructose by imprinted polymers.

Binding of fructose to the fructose imprinted polymer (MIP(Frc)) and pinacol imprinted polymer (control) were studied both in batch and a flow through mode. The influence of the cross-linkers ethylene glycol dimethacrylate (EDMA) and trimethylolpropane trimethacrylate (TRIM) on the binding characteristics was analysed. TRIM cross-linked MIPs showed a lower (unspecific) binding for the control polymer (pinacol imprinted) and higher binding of fructose as compared with the EDMA-MIPs. Furthermore interactions of a TRIM cross-linked molecularly imprinted polymer against fructose and its corresponding template were studied using a thermistor. Label-free detection of fructose was realised in the range of 0.5-10mM. The difference in enthalpy changes between specific binding of fructose to boronic acid moieties of the MIP and non-specific binding to the matrix leads to an 18-fold higher apparent imprinting factor than batch binding studies. Cross-reactivity studies using MIP sensor indicate that the interaction of fructose to MIP generates higher signal than disaccharides. The studies described in this paper demonstrate the potential of direct characterisation of molecular binding events.

Enzyme activity control by responsive redoxpolymers.

A new thermoresponsive poly-N-isopropylacrylamide (PNIPAM)-ferrocene polymer was synthesized and characterized. PNIPAMFoxy bears additional oxirane groups which were used for attachment by a self-assembly process on a cysteamine-modified gold electrode to create a thin hydrophilic film. The new redox polymer enabled electrical communication between the cofactor pyrrolinoquinoline quinone (PQQ) of soluble glucose dehydrogenase (sGDH) and the electrode for sensitive detection of this enzyme as a prospective protein label. The temperature influence on the redox polymer/enzyme complex was investigated. An inverse temperature response behavior of surface bound PNIPAMFoxy compared to the soluble polymer was found and is discussed in detail. The highest efficiency of mediated electron transfer for the immobilized PNIPAMFoxy with sGDH was observed at 24 degrees C, which was twice as high as that of its soluble counterpart. A steady-state electrooxidation current densitiy of 4.5 microA.cm-2 was observed in the presence of 10 nM sGDH and 5 mM glucose. A detection limit of 0.5 nM of soluble PQQ-sGDH was obtained.