Packing Polydisperse Colloids into Crystals: When Charge-Dispersity Matters.

Monte Carlo simulations, fully constrained by experimental parameters, are found to agree well with a measured phase diagram of aqueous dispersions of nanoparticles with a moderate size polydispersity over a broad range of salt concentrations, c_{s}, and volume fractions, ϕ. Upon increasing ϕ, the colloids freeze first into coexisting compact solids then into a body centered cubic phase (bcc) before they melt into a glass forming liquid. The surprising stability of the bcc solid at high ϕ and c_{s} is explained by the interaction (charge) polydispersity and vibrational entropy.

Hiding in Plain View: Colloidal Self-Assembly from Polydisperse Populations.

We report small-angle x-ray scattering experiments on aqueous dispersions of colloidal silica with a broad monomodal size distribution (polydispersity, 14%; size, 8 nm). Over a range of volume fractions, the silica particles segregate to build first one, then two distinct sets of colloidal crystals. These dispersions thus demonstrate fractional crystallization and multiple-phase (bcc, Laves AB_{2}, liquid) coexistence. Their remarkable ability to build complex crystal structures from a polydisperse population originates from the intermediate-range nature of interparticle forces, and it suggests routes for designing self-assembling colloidal crystals from the bottom up.

Time- and Space-Resolved SAXS Experiments Inform on Phase Transition Kinetics in Hydrated, Liquid-Crystalline Films of Polyion-Surfactant Ion "Complex Salts".

Detailed time- and space-resolved SAXS experiments show the variation with hydration of liquid crystalline structures in ethanol-cast 5-80 µm thick films of polyion-surfactant ion "complex salts" (CS). The CS were dodecyl- (C12) or hexadecyl- (C16) trimethylammonium surfactants with polyacrylate (DP 25 or 6000) counter-polyions. The experiments were carried out on vertical films in humid air above a movable water bath, so that gradients of hydration were generated, which could rapidly be altered. Scans over different positions along a film, kept fixed relative to the bath, showed that the surfactant aggregates of the various liquid-crystalline CS structures grow in cross-sectional area with decreasing hydration. This behavior is attributed to the low water content. Studies of films undergoing rapid dehydration, made possible by the original experimental setup, gave strong evidence that some of the investigated systems remain kinetically trapped for minutes in a nonequilibrium Pm3n micellar cubic phase before switching to the equilibrium P6mm 2D hexagonal phase. Both the length of the polyion and the length of the surfactant hydrocarbon "tail" affect the kinetics of the phase transition. The slowness of the cubic-to-hexagonal structural transition is attributed to the fact that it requires major rearrangements of the polyions and surfactant ions relative to each other. By contrast, other structure changes, such as between the hexagonal and rectangular phases, were observed to occur much more rapidly.

How do polydisperse repulsive colloids crystallize?

A modified version of the Gibbs-ensemble Monte-Carlo method reveals how polydisperse charged colloidal particles can build complex colloidal crystals. It provides general rules that are applicable to this fractionated crystallization that stems from size segregation. It explains the spontaneous formation of complex crystals with very large unit-cells in suspensions of nanoparticles with a broad size distribution.

Water-responsive internally structured polymer-surfactant films on solid surfaces.

Water-insoluble films of oppositely charged polyion-surfactant ion "complex salts" (CS) are readily cast on solid surfaces from ethanolic solutions. The methodology introduces new possibilities to study and utilize more or less hydrated CS. Direct SAXS measurements show that the surface films are water-responsive and change their liquid crystalline structure in response to changes in the water activity of the environment. In addition to the classical micellar cubic and hexagonal phases, a rectangular ribbon phase and a hexagonal close-packed structure have now been detected for CS composed of cationic alkyltrimethylammonium surfactants with polyacrylate counterions. Added cosurfactants, decanol or the nonionic surfactant C12E5, yield additional lamellar and bicontinuous cubic structures. Images of the surfaces by optical and atomic force microscopy show that the films cover the surfaces well but have a more or less irregular surface topology, including "craters" of sizes ranging from a few to hundreds of micrometers. The results indicate possibilities to create a wealth of water-responsive structured CS films on solid surfaces.

Aggregation of the salivary proline-rich protein IB5 in the presence of the tannin EgCG.

In the mouth, proline-rich proteins (PRP), which are major components of stimulated saliva, interact with tannins contained in food. We report in vitro interactions of the tannin epigallocatechin gallate (EgCG), with a basic salivary PRP, IB5, studied through electrospray ionization mass spectrometry (ESI-MS), small-angle X-ray scattering (SAXS), and dynamic light scattering (DLS). In dilute protein (IB5) solutions of low ionic strength (1 mM), the proteins repel each other, and the tannins bind to nonaggregated proteins. ESI-MS experiments determine the populations of nonaggregated proteins that have bound various numbers of tannin molecules. These populations match approximately the Poisson distribution for binding to n = 8 sites on the protein. MS/MS experiments confirm that complexes containing n = 1 to 8 EgCG molecules are dissociated with the same energy. Assuming that the 8 sites are equivalent, we calculate a binding isotherm, with a binding free energy Δµ = 7.26RT(a) (K(d) = 706 µM). In protein solutions that are more concentrated (0.21 mM) and at higher ionic strength (50 mM, pH 5.5), the tannins can bridge the proteins together. DLS experiments measure the number of proteins per aggregate. This number rises rapidly when the EgCG concentration exceeds a threshold (0.2 mM EgCG for 0.21 mM of IB5). SAXS experiments indicate that the aggregates have a core-corona structure. The core contains proteins that have bound at least 3 tannins and the corona has proteins with fewer bound tannins. These aggregates coexist with nonaggregated proteins. Increasing the tannin concentration beyond the threshold causes the transfer of proteins to the aggregates and a fast rise of the number of proteins per aggregate. A poisoned growth model explains this fast rise. Very large cationic aggregates, containing up to 10,000 proteins, are formed at tannin concentrations (2 mM) slightly above the aggregation threshold (0.2 mM).

Drying dip-coated colloidal films.

We present the results from a small-angle X-ray scattering (SAXS) study of lateral drying in thin films. The films, initially 10 µm thick, are cast by dip-coating a mica sheet in an aqueous silica dispersion (particle radius 8 nm, volume fraction ϕ(s) = 0.14). During evaporation, a drying front sweeps across the film. An X-ray beam is focused on a selected spot of the film, and SAXS patterns are recorded at regular time intervals. As the film evaporates, SAXS spectra measure the ordering of particles, their volume fraction, the film thickness, and the water content, and a video camera images the solid regions of the film, recognized through their scattering of light. We find that the colloidal dispersion is first concentrated to ϕ(s) = 0.3, where the silica particles begin to jam under the effect of their repulsive interactions. Then the particles aggregate until they form a cohesive wet solid at ϕ(s) = 0.68 ± 0.02. Further evaporation from the wet solid leads to evacuation of water from pores of the film but leaves a residual water fraction ϕ(w) = 0.16. The whole drying process is completed within 3 min. An important finding is that, in any spot (away from boundaries), the number of particles is conserved throughout this drying process, leading to the formation of a homogeneous deposit. This implies that no flow of particles occurs in our films during drying, a behavior distinct to that encountered in the iconic coffee-stain drying. It is argued that this type of evolution is associated with the formation of a transition region that propagates ahead of the drying front. In this region the gradient of osmotic pressure balances the drag force exerted on the particles by capillary flow toward the liquid-solid front.

Identification of polyoxometalates as nanomolar noncompetitive inhibitors of protein kinase CK2.

Protein kinase CK2 is a multifunctional kinase of medical importance that is dysregulated in many cancers. In this study, polyoxometalates were identified as original CK2 inhibitors. [P2Mo18O62](6-) has the most potent activity. It inhibits the kinase in the nanomolar range by targeting key structural elements located outside the ATP- and peptide substrate-binding sites. Several polyoxometalate derivatives exhibit strong inhibitory efficiency, with IC50 values < or = 10 nM. Furthermore, these inorganic compounds show a striking specificity for CK2 when tested in a panel of 29 kinases. Therefore, polyoxometalates are effective CK2 inhibitors in terms of both efficiency and selectivity and represent nonclassical kinase inhibitors that interact with CK2 in a unique way. This binding mode may provide an exploitable mechanism for developing potent drugs with desirable properties, such as enhanced selectivity relative to ATP-mimetic inhibitors.

Insertion of amides into a polyoxometalate.

POM alert: The incorporation of an amide oxygen atom into the framework of the Dawson-type polyoxometalate (POM) cluster [P(2)V(3)W(15)O(62)](9-) (see picture) allows the communication of electronic effects between the organic and the inorganic parts of the molecule, including fine-tuning of the redox properties of the entire hybrid POM by the organic components, and transmission of the POM's electron-attracting properties to the organic moiety.

Drying paint: from micro-scale dynamics to mechanical instabilities.

Charged colloidal dispersions make up the basis of a broad range of industrial and commercial products, from paints to coatings and additives in cosmetics. During drying, an initially liquid dispersion of such particles is slowly concentrated into a solid, displaying a range of mechanical instabilities in response to highly variable internal pressures. Here we summarize the current appreciation of this process by pairing an advection-diffusion model of particle motion with a Poisson-Boltzmann cell model of inter-particle interactions, to predict the concentration gradients in a drying colloidal film. We then test these predictions with osmotic compression experiments on colloidal silica, and small-angle X-ray scattering experiments on silica dispersions drying in Hele-Shaw cells. Finally, we use the details of the microscopic physics at play in these dispersions to explore how two macroscopic mechanical instabilities-shear-banding and fracture-can be controlled.This article is part of the themed issue 'Patterning through instabilities in complex media: theory and applications.'

Pd-containing organopolyoxometalates derived from Dawson polyoxometalate [P2W15V3O62]9⁻: Lewis acidity and dual site catalysis.

Grafting of a palladium complex to the Dawson vanadotungstate polyanion [P2W15V3O62](9-) via an organic ligand generates a large family of pincer-type hybrid polyoxometalates. The palladium-POM derivatives have dual catalytic properties. Unlike their parent inorganic polyanions, they catalyze allylations while retaining their oxidant character, which leads to single-pot dual site catalysis. This opens a new route for multicatalytic reactions.