On the Origin of the Light Yield Enhancement in Polymeric Composite Scintillators Loaded with Dense Nanoparticles.

Fast emitting polymeric scintillators are requested in advanced applications where high speed detectors with a large signal-to-noise ratio are needed. However, their low density implies a weak stopping power of high energy radiation and thus a limited light output and sensitivity. To enhance their performance, polymeric scintillators can be loaded with dense nanoparticles (NPs). We investigate the properties of a series of polymeric scintillators by means of photoluminescence and scintillation spectroscopy, comparing standard scintillators with a composite system loaded with dense hafnium dioxide (HfO2) NPs. The nanocomposite shows a scintillation yield enhancement of +100% with an unchanged time response. We provide for the first time an interpretation of this effect, pointing out the local effect of NPs in the generation of emissive states upon interaction with ionizing radiation. The obtained results indicate that coupling fast conjugated emitters with optically inert dense NPs could lead to surpassing the actual limits of pure polymeric scintillators.

PVDF-HFP Based, Quasi-Solid Nanocomposite Electrolytes for Lithium Metal Batteries.

Composite polymer electrolytes are systems of choice for future solid-state lithium metal batteries (LMBs). Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) is among the most interesting matrices to develop new generation quasi-solid electrolytes (QSEs). Here it is reported on nanocomposites made of PVDF-HFP and pegylated SiO2 nanoparticles. Silica-based hybrid nanofillers are obtained by grafting chains of poly(ethylene glycol) methyl ether (PEG) with different molecular weight on the surface of silica nanoparticles. The functionalized nanofiller improves the mechanical, transport and electrochemical properties of the QSEs, which show good ionic conductivity values and high resistance against dendrite penetration, ensuring boosted long and safe device operation. The most promising result is obtained by dispersing 5 wt% of SiO2 functionalized with short PEG chains (PEG750, Mw = 750 g mol-1) in the PVDF-HFP matrix with an ease solvent-casting procedure. It shows ionic conductivity of 0.1 mS cm-1 at 25 °C, more than 250 h resistance to stripping/plating, and impressive results during cycling tests in LMB with LiFePO4 cathode.

Unveiling the Role of PEO-Capped TiO2 Nanofiller in Stabilizing the Anode Interface in Lithium Metal Batteries.

Lithium metal batteries (LMBs) will be a breakthrough in automotive applications, but they require the development of next-generation solid-state electrolytes (SSEs) to stabilize the anode interface. Polymer-in-ceramic PEO/TiO2 nanocomposite SSEs show outstanding properties, allowing unprecedented LMBs durability and self-healing capabilities. However, the mechanism underlying the inhibition/delay of dendrite growth is not well understood. In fact, the inorganic phase could act as both a chemical and a mechanical barrier to dendrite propagation. Combining advanced in situ and ex situ experimental techniques, we demonstrate that oligo(ethylene oxide)-capped TiO2, although chemically inert toward lithium metal, imparts SSE with mechanical and dynamical properties particularly favorable for application. The self-healing characteristics are due to the interplay between mechanical robustness and high local polymer mobility which promotes the disruption of the electric continuity of the lithium dendrites (razor effect).

Photo- and radio-luminescence of porphyrin functionalized ZnO/SiO2 nanoparticles.

The development of hybrid nanoscintillators is hunted for the implementation of modern detection technologies, like in high energy physics, homeland security, radioactive gas sensing, and medical imaging, as well as of the established therapies in radiation oncology, such as in X-ray activated photodynamic therapy. Engineering of the physico-chemical properties of nanoparticles (NPs) enables the manufacture of hybrids in which the conjugation of inorganic/organic components leads to increased multifunctionality and performance. However, the optimization of the properties of nanoparticles in combination with the use of ionizing radiation is not trivial: a complete knowledge on the structure, composition, physico-chemical features, and scintillation property relationships in hybrid nanomaterials is pivotal for any applications exploiting X-rays. In this paper, the design of hybrid nanoscintillators based on ZnO grown onto porous SiO2 substrates (ZnO/SiO2) has been performed in the view to create nanosystems potentially suitable in X-ray activated photodynamic therapy. Indeed, cytotoxic porphyrin dyes with increasing concentrations have been anchored on ZnO/SiO2 nanoparticles through amino-silane moieties. Chemical and structural analyses correlated with photoluminescence reveal that radiative energy transfer between ZnO and porphyrins is the principal mechanism prompting the excitation of photosensitizers. The use of soft X-ray excitation results in a further sensitization of the porphyrin emission, due to augmented energy deposition promoted by ZnO in the surroundings of the chemically bound porphyrin. This finding unveils the cruciality of the design of hybrid nanoparticles in ruling the efficacy of the interaction between ionizing radiation and inorganic/organic moieties, and thus of the final nanomaterial performances towards the foreseen application.

A physico-chemical investigation of highly concentrated potassium acetate solutions towards applications in electrochemistry.

Water-in-salt solutions, i.e. solutions in which the amount of salt by volume or weight is larger than that of the solvent, are attracting increasing attention in electrochemistry due to their distinct features that often include decomposition potentials much higher than those of lower concentration solutions. Despite the high solubility of potassium acetate (KAC) in water at room temperature (up to 25 moles of salt per kg of solvent), the low cost, and the large availability, the use of highly concentrated KAC solutions is still limited to a few examples in energy storage applications and a systematic study of their physical-chemical properties is lacking. To fill this gap, we have investigated the thermal, rheological, electrical, electrochemical, and spectroscopic features of KAC/water solutions in the compositional range between 1 and 25 mol kg-1. We show the presence of a transition between the "salt-in-solvent" and "solvent-in-salt" regimes in the range of 10-15 mol kg-1. Among the explored compositions, the highest concentrations (20 and 25 mol kg-1) exhibit good room temperature conductivity values (55.6 and 31 mS cm-1, respectively) and a large electrochemical potential window (above 2.5 V).

Surface Characterization of TiO2 Polymorphic Nanocrystals through 1H-TD-NMR.

Nanocrystals (NCs) surface characterization is a fundamental step for understanding the physical and chemical phenomena involved at the nanoscale. Surface energy and chemistry depend on particle size and composition, and, in turn, determine the interaction of NCs with the surrounding environment, their properties and stability, and the feasibility of nanocomposites. This work aims at extracting more information on the surface of different titanium dioxide polymorphs using 1H-TD-NMR of water. Taking advantage of the interaction between water molecules and titanium dioxide NCs, it is possible to correlate the proton transverse relaxation times ( T2) as the function of the concentration and the specific surface area (δp· Cm) and use it as an indicator of the crystal phase. Examples of three different crystals phase, rutile, anatase, and brookite, have been finely characterized and their behavior in water solution have been studied with TD-NMR. The results show a linear correlation between relaxivity ( R2) and their concentration Cm. The resulting slopes, after normalization for the specific surface, represent the surface/water interaction and range from 1.28 g m-2 s-1 of 50 nm rutile nanocrystals to 0.52 for similar sized brookite. Even higher slopes (1.85) characterize smaller rutile NCs, in qualitative accordance with the trends of surface energy. Thanks to proton relaxation phenomena that occur at the NCs surface, it is possible to differentiate the crystal phase and the specific surface area of titanium dioxide polymorphs in water solution.

Spectro-electrochemical Probing of Intrinsic and Extrinsic Processes in Exciton Recombination in I-III-VI2 Nanocrystals.

Ternary CuInS2 nanocrystals (CIS NCs) are attracting attention as nontoxic alternatives to heavy metal-based chalcogenides for many technologically relevant applications. The photophysical processes underlying their emission mechanism are, however, still under debate. Here we address this problem by applying, for the first time, spectro-electrochemical methods to core-only CIS and core/shell CIS/ZnS NCs. The application of an electrochemical potential enables us to reversibly tune the NC Fermi energy and thereby control the occupancy of intragap defects involved in exciton decay. The results indicate that, in analogy to copper-doped II-VI NCs, emission occurs via radiative capture of a conduction-band electron by a hole localized on an intragap state likely associated with a Cu-related defect. We observe the increase in the emission efficiency under reductive electrochemical potential, which corresponds to raising the Fermi level, leading to progressive filling of intragap states with electrons. This indicates that the factor limiting the emission efficiency in these NCs is nonradiative electron trapping, while hole trapping is of lesser importance. This observation also suggests that the centers for radiative recombination are Cu2+ defects (preexisting and/or accumulated as a result of photoconversion of Cu1+ ions) as these species contain a pre-existing hole without the need for capturing a valence-band hole generated by photoexcitation. Temperature-controlled photoluminescence experiments indicate that the intrinsic limit on the emission efficiency is imposed by multiphonon nonradiative recombination of a band-edge electron and a localized hole. This process affects both shelled and unshelled CIS NCs to a similar degree, and it can be suppressed by cooling samples to below 100 K. Finally, using experimentally measured decay rates, we formulate a model that describes the electrochemical modulation of the PL efficiency in terms of the availability of intragap electron traps as well as direct injection of electrons into the NC conduction band, which activates nonradiative Auger recombination, or electrochemical conversion of the Cu2+ states into the Cu1+ species that are less emissive due to the need for their "activation" by the capture of photogenerated holes.

Augmented excitation cross section of gadolinium ions in nanostructured glasses.

In this Letter, we present detailed absorption and emission data on nanostructured germanosilicate glasses and glass ceramics containing Ga2O3 nanophases and doped with Gd ions. The results show that these systems are suitable hosts for the enhancement of the excitation cross section of rare earth ions via energy transfer from the gallium oxide nanophase with a related quantum yield of 21%. The role of matrix composition and nanostructure morphology on the Gd emission is discussed.

Donor-Acceptor Control in Grown-in-Glass Gallium Oxide Nanocrystals by Crystallization-driven Heterovalent Doping.

Incorporation of doping ions in nanocrystals is a strategy for providing nanophases with functions directly related to ion features. At the nanoscale, however, doping can also activate more complex effects mediated by perturbation of the nanophase size and structure. Here, we report a paradigmatic case in which we modify grown-in-glass γ-Ga2 O3 nanophases by nickel or titanium doping of the starting glass, so as to control the concentration of oxygen and gallium vacancies responsible for the light emission. Optical absorption and luminescence show that Ni2+ and Ti4+ ions enter into the nanophase, but differential scanning calorimetry and X-ray diffraction indicate that Ni and Ti also work as modifiers of nanocrystal growth. As a result, doping influences nanocrystal size and concentration, which in turn dictate the number of donors and acceptors per nanocrystal. Finally, the chain of effects turns out to control both the intensity and spectral distribution of the light emission.

Luminescence mechanisms of defective ZnO nanoparticles.

ZnO nanoparticles (NPs) synthesized by pulsed laser ablation (PLAL) of a zinc plate in deionized water were investigated by time-resolved photoluminescence (PL) and complementary techniques (TEM, AFM, µRaman). HRTEM images show that PLAL produces crystalline ZnO NPs in wurtzite structure with a slightly distorted lattice parameter a. Consistently, optical spectra show the typical absorption edge of wurtzite ZnO (Eg = 3.38 eV) and the related excitonic PL peaked at 3.32 eV with a subnanosecond lifetime. ZnO NPs display a further PL peaking at 2.2 eV related to defects, which shows a power law decay kinetics. Thermal annealing in O2 and in a He atmosphere produces a reduction of the A1(LO) Raman mode at 565 cm(-1) associated with oxygen vacancies, accompanied by a decrease of defect-related emission at 2.2 eV. Based on our experimental results the emission at 2.2 eV is proposed to originate from a photo-generated hole in the valence band recombining with an electron deeply trapped in a singly ionized oxygen vacancy. This investigation clarifies important aspects of the photophysics of ZnO NPs and indicates that ZnO emission can be controlled by thermal annealing, which is important in view of optoelectronic applications.

Transparent and High-Refractive-Index Titanium Dioxide/Thermoplastic Polyurethane Nanocomposites.

Transparent nanocomposite films made of surface-modified titanium dioxide nanoparticles and thermoplastic polyurethane are prepared via film casting approach showing enhanced refractive indexes and mechanical properties. Two different sets of composites were prepared up to 37.5 wt % of inorganic nanoparticles with a diameter <15 nm, one set using particles capped only with oleic acid and a second one with a bimodal system layer made of oleic acid and mPEO-5000 as coating agents. All of the composites show significantly enhanced refractive index and mechanical properties than the neat polymeric matrix. The transparency of nanocomposite films shows the excellent dispersion of the inorganic nanoparticles in the polymeric matrix avoiding aggregation and precipitation phenomena. Our study provides a facile and feasible route to produce transparent nanocomposite films with tunable mechanical properties and high refractive indices for various applications.

A Decade of Nipple-Sparing Mastectomy: Lessons Learned in 3035 Immediate Implant-Based Breast Reconstructions.

BACKGROUND: Nipple-sparing mastectomy is commonly performed for breast cancer treatment or prevention. The authors present one of the largest breast reconstruction series in the literature. METHODS: A single-institution retrospective review was conducted from 2007 to 2019. RESULTS: The authors' query identified 3035 implant-based breast reconstructions after nipple-sparing mastectomy, including 2043 direct-to-implant and 992 tissue expander-to-implant reconstructions. The overall major complication rate was 9.15%, and the nipple necrosis rate was 1.20%. Therapeutic mastectomy was associated with higher overall complications and explantations compared with prophylactic mastectomy ( P < 0.01). In comparisons of unilateral and bilateral procedures, bilateral mastectomy had an increased risk for complications (OR, 1.46; 95% CI, 0.997 to 2.145; P = 0.05). Tissue-expander reconstructions had higher rates of nipple necrosis (1.9% versus 0.88%; P = 0.015), infection (4.2% versus 2.8%; P = 0.04), and explantation (5.1% versus 3.5%; P = 0.04) compared with direct-to-implant reconstruction. When assessing plane of reconstruction, the authors found similar rates of complications between subpectoral dual-plane and prepectoral reconstruction. There was no difference in complications between reconstruction with acellular dermal matrix or mesh compared with total or partial muscle coverage without acellular dermal matrix/mesh (OR, 0.749; 95% CI, 0.404 to 1.391; P = 0.361). Multivariable regression analysis revealed preoperative radiotherapy (OR, 2.465; 95% CI, 1.579 to 3.848; P < 0.001), smoking (OR, 2.53; 95% CI, 1.581 to 4.054; P < 0.001), and a periareolar incision (OR, 3.657; 95% CI, 2.276 to 5.875; P < 0.001) to be the strongest predictors of complications and nipple necrosis ( P < 0.05). CONCLUSIONS: Nipple-sparing mastectomy and immediate breast reconstruction has a low rate of complications. In this series, radiation therapy, smoking, and incision choice predicted overall complications and nipple necrosis, whereas direct-to-implant reconstruction and acellular dermal matrix or mesh did not increase risk. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Spatially selective Au nanoparticle growth in laser-quality glass controlled by UV-induced phosphate-chain cross-linkage.

Herein we describe how UV excitation of localized electronic states in phosphate glasses can activate structural rearrangements that influence the kinetics of Au nanoparticle (NP) thermal growth in Au-doped glass. The results suggest a novel strategy to address the problem of controlling nano-assembly processes of metal NP patterns in fully inorganic and chemically stable hard materials, such as laser-quality glasses. We show that the mechanism is promoted by opening and subsequent cross-linkage of phosphate chains under UV excitation of non-bridging groups in the amorphous network of the glass, with a consequent modification of Au diffusion and metal NP growth. Importantly, the micro-Raman mapping of the UV-induced modifications demonstrates that the process is restricted within the beam waist region of the focused UV laser beam. This fact is consistent with the need for more than one excitation event, close in time and in space, in order to promote structural cross-linkage and Au diffusion confinement. The stability of the photo-induced modifications makes it possible to design new metal patterning approaches for the fabrication of three-dimensional metal structures in laser-quality materials for high-power nonlinear applications.

Highly Reversible Ti/Sn Oxide Nanocomposite Electrodes for Lithium Ion Batteries Obtained by Oxidation of Ti3 Al(1-x) Snx C2 Phases.

Among the materials for the negative electrodes in Li-ion batteries, oxides capable of reacting with Li+ via intercalation/conversion/alloying are extremely interesting due to their high specific capacities but suffer from poor mechanical stability. A new way to design nanocomposites based on the (Ti/Sn)O2 system is the partial oxidation of the tin-containing MAX phase of Ti3 Al(1-x) Snx O2 composition. Exploiting this strategy, this work develops composite electrodes of (Ti/Sn)O2 and MAX phase capable of withstanding over 600 cycles in half cells with charge efficiencies higher than 99.5% and specific capacities comparable to those of graphite and higher than lithium titanate (Li4 Ti5 O12 ) or MXenes electrodes. These unprecedented electrochemical performances are also demonstrated at full cell level in the presence of a low cobalt content layered oxide and explained through an accurate chemical, morphological, and structural investigation which reveals the intimate contact between the MAX phase and the oxide particles. During the oxidation process, electroactive nanoparticles of TiO2 and Ti(1-y) Sny O2 nucleate on the surface of the unreacted MAX phase which therefore acts both as a conductive agent and as a buffer to preserve the mechanical integrity of the oxide during the lithiation and delithiation cycles.

Structure-Property Correlations in Aqueous Binary Na+/K+-CH3COO- Highly Concentrated Electrolytes.

Highly concentrated aqueous binary solutions of acetate salts are promising systems for different electrochemical applications, for example, energy storage devices. The very high solubility of CH3COOK allows us to obtain water-in-salt electrolyte concentrations, thus reducing ion activity and extending the cathodic stability of an aqueous electrolyte. At the same time, the presence of Li+ or Na+ makes these solutions compatible with intercalation materials for the development of rechargeable alkaline-ion batteries. Although there is a growing interest in these systems, a fundamental understanding of their physicochemical properties is still lacking. Here, we report and discuss the physicochemical and electrochemical properties of a series of solutions based on 20 mol kg-1 CH3COOK with different concentrations of CH3COONa. The most concentrated solution, 20 mol kg-1 CH3COOK + 7 mol kg-1 CH3COONa, gives the best compromise between transport properties and electrochemical stability, displaying a conductivity of 21.2 mS cm-1 at 25 °C and a stability window of up to 3 V in "ideal" conditions, i.e., using a small surface area and highly electrocatalytic electrode in a flooded cell. Careful Raman spectroscopy analyses help to address the interaction network, the phase evolution with temperature, and the crystallization kinetics.

Microfluorescence analysis of nanostructuring inhomogeneity in optical fibers with embedded gallium oxide nanocrystals.

A spectroscopic protocol is proposed to implement confocal microfluorescence imaging to the analysis of microinhomogeneity in the nanocrystallization of the core of fibers belonging to a new kind of broadband fiber amplifier based on glass with embedded nanocrystals. Nanocrystallization, crucial for achieving an adequate light emission efficiency of transition metal ions in these materials, has to be as homogeneous as possible in the fiber to assure optical amplification. This requirement calls for a sensitive method for monitoring nanostructuring in oxide glasses. Here we show that mapping microfluorescence excited at 633 nm by a He-Ne laser may give a useful tool in this regard, thanks to quasi-resonant excitation of coordination defects typical of germanosilicate materials, such as nonbridging oxygens and charged Ge-O-Ge sites, whose fluorescence are shown to undergo spectral modifications when nanocrystals form into the glass. The method has been positively checked on prototypes of optical fibers--preventively characterized by means of scanning electron microscopy and energy dispersive spectroscopy--fabricated from preforms of Ni-doped Li2O-Na2O-Sb2O3-Ga2O3-GeO2-SiO2 glass in silica cladding and subjected to heat treatment to activate gallium oxide nanocrystal growth. The method indeed enables not only the mapping of the crystallization degree but also the identification of drawing-induced defects in the fiber cladding.

Promising Electrocatalytic Water and Methanol Oxidation Reaction Activity by Nickel Doped Hematite/Surface Oxidized Carbon Nanotubes Composite Structures.

Tailoring the precise construction of non-precious metals and carbon-based heterogeneous catalysts for electrochemical oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) is crucial for energy conversion applications. Herein, this work reports the composite of Ni doped Fe2 O3 (Ni-Fe2 O3 ) with mildly oxidized multi-walled CNT (O-CNT) as an outstanding Mott-Schottky catalyst for OER and MOR. O-CNT acts as a co-catalyst which effectively regulates the charge transfer in Ni-Fe2 O3 and thus enhances the electrocatalytic performance. Ni-Fe2 O3 /O-CNT exhibits a low onset potential of 260 mV and overpotential 310 mV @ 10 mA cm-2 for oxygen evolution. Being a Mott-Schottky catalyst, it achieves the higher flat band potential of -1.15 V with the carrier density of 0.173×1024  cm-3 . Further, in presence of 1 M CH3 OH, it delivers the MOR current density of 10 mA cm-2 at 1.46 V vs. RHE. The excellent electrocatalytic OER and MOR activity of Ni-Fe2 O3 /O-CNT could be attributed to the synergistic interaction between Ni-doped Fe2 O3 and O-CNT.

Waste Face Surgical Mask Transformation into Crude Oil and Nanostructured Electrocatalysts for Fuel Cells and Electrolyzers.

A novel route for the valorization of waste into valuable products was developed. Surgical masks commonly used for COVID 19 protection by stopping aerosol and droplets have been widely used, and their disposal is critical and often not properly pursued. This work intended to transform surgical masks into platinum group metal-free electrocatalysts for oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) as well as into crude oil. Surgical masks were subjected to controlled-temperature and -atmosphere pyrolysis, and the produced char was then converted into electrocatalysts by functionalizing it with metal phthalocyanine of interest. The electrocatalytic performance characterization towards ORR and HER was carried out highlighting promising activity. At different temperatures, condensable oil fractions were acquired and thoroughly analyzed. Transformation of waste surgical masks into electrocatalysts and crude oil can open new routes for the conversion of waste into valuable products within the core of the circular economy.

Defect-assisted photocatalytic activity of glass-embedded gallium oxide nanocrystals.

The use of glassceramics in photocatalysis is an attractive option for the realization of smart optical fibers and self-cleaning windows. Here we present the photocatalytic activity of germanosilicate glasses embedding Ga2O3 nanocrystals prepared by batch melting and glass heat treatment. The powdered material is used for UV-assisted degradation of rhodamine in water. The kinetics show changes after repeated experiments. In the first cycle, the apparent rate is governed by a second-order reaction with a Gaussian-like shape, whereas the second cycle follows a first-order reaction. The modification appears to be correlated with perturbations in the defect population. Photoluminescence has been used to monitor the evolution of such defects. Kinetic data on photoreactions and defect formation have been modelled in a combined frame in which the defect concentration determines the photocatalytic activity. The results prove the photocatalytic ability of the studied glassceramics. Moreover, the general validity of the kinetic model can be of interest for other systems in which the photocatalytic response depends on photoreactive species concentration.

Nitric oxide and hydrogen peroxide involvement during programmed cell death of Sechium edule nucellus.

The nucellus is a maternal tissue that feeds the developing embryo and the secondary endosperm. During seed development the cells of the nucellus suffer a degenerative process early after fertilization as the cellular endosperm expands and accumulates reserves. Nucellar cell degeneration has been characterized as a form of developmentally programmed cell death (PCD). In this work we show that nucellus PCD is accompanied by a considerable production of both nitric oxide and hydrogen peroxide (NO and H(2)O(2)). Interestingly, each of the two molecules is able to induce the production of the other and to cause cell death when applied to a living nucellus. We show that the induced cell death has features of a PCD, accompanied by profound changes in the morphology of the nuclei and by a massive degradation of nuclear DNA. Moreover, we report that NO and H(2)O(2) cause an induction of caspase-like proteases previously characterized in physiological nucellar PCD.