Screening priority pesticides for drinking water quality regulation and monitoring by machine learning: Analysis of factors affecting detectability.

Proper selection of new contaminants to be regulated or monitored prior to implementation is an important issue for regulators and water supply utilities. Herein, we constructed and evaluated machine learning models for predicting the detectability (detection/non-detection) of pesticides in surface water as drinking water sources. Classification and regression models were constructed for Random Forest, XGBoost, and LightGBM, respectively; of these, the LightGBM classification model had the highest prediction accuracy. Furthermore, its prediction performance was superior in all aspects of Recall, Precision, and F-measure compared to the detectability index method, which is based on runoff models from previous studies. Regardless of the type of machine learning model, the number of annual measurements, sales quantity of pesticide for rice-paddy field, and water quality guideline values were the most important model features (explanatory variables). Analysis of the impact of the features suggested the presence of a threshold (or range), above which the detectability increased. In addition, if a feature (e.g., quantity of pesticide sales) acted to increase the likelihood of detection beyond a threshold value, other features also synergistically affected detectability. Proportion of false positives and negatives varied depending on the features used. The superiority of the machine learning models is their ability to represent nonlinear and complex relationships between features and pesticide detectability that cannot be represented by existing risk scoring methods.

Metabolism-Coupled Cell-Independent Acetylcholinesterase Activity Assay for Evaluation of the Effects of Chlorination on Diazinon Toxicity.

Drinking water quality guideline values for toxic compounds are determined based on their acceptable daily intake. The toxicological end point for determining the acceptable daily intake of most organophosphorus insecticides is inhibition of acetylcholinesterase (AChE). Although insecticides ingested with drinking water are partly metabolized by the liver before transport to the rest of the body, no current cell-independent AChE activity assay takes the effects of metabolism into account. Here, we incorporated metabolism into a cell-independent AChE activity assay and then evaluated the change in anti-AChE activity during chlorination of a solution containing the organophosphorus insecticide diazinon. The anti-AChE activities of solutions of diazinon or diazinon-oxon, the major transformation product of diazinon during chlorination, were dramatically changed by metabolism: the activity of diazinon solution was markedly increased, whereas that of diazinon-oxon solution was slightly decreased, clearly indicating the importance of incorporating metabolism into assays examining toxicity after oral ingestion. Upon chlorination, diazinon was completely transformed, in part to diazinon-oxon. Although diazinon solution without metabolism did not show anti-AChE activity before chlorination, it did after chlorination. In contrast, with metabolism, diazinon solution did show anti-AChE activity before chlorination, but chlorination gradually decreased this activity over time. The observed anti-AChE activities were attributable solely to diazinon and diazinon-oxon having been contained in the samples before metabolism, clearly suggesting that the presence not only of diazinon but also of diazinon-oxon should be monitored in drinking water. Further examination using a combination of tandem mass spectrometry and in silico site-of-metabolism analyses revealed the structure of a single metabolite that was responsible for the observed anti-AChE activity after metabolism. However, because this compound is produced via metabolism in the human body after oral ingestion of diazinon, its presence in drinking water need not be monitored and regulated.

Quantum Spin Liquid State in a Two-Dimensional Semiconductive Metal-Organic Framework.

Two-dimensional metal-organic frameworks (2D MOFs) have attracted much attention, as they are the crystalline materials that exhibit both conductivity and microporosity. Numerous efforts have been made to advance their application as chemiresistive sensors or electrochemical capacitors. However, the intrinsic physical properties and spin states of these materials remain poorly understood. Most of these 2D MOFs possess a honeycomb lattice, with a Kagomé lattice arrangement of metal cations. These structural characteristics suggest that these MOFs would be candidates for geometrically frustrated spin systems with unprecedented magnetic phenomena. Herein, by performing magnetic susceptibility and specific heat measurements at an ultralow temperature down to 38mK on a 2D semiconductive MOF, Cu3(HHTP)2, a quantum spin liquid state that arises from the geometrical frustration was suggested. This result illustrates the potential of strongly correlated MOFs as systems with emergent phenomena induced by unusual structural topologies.

Inhibitory effect of hybrid liposomes on the growth of liver cancer stem cells.

PURPOSE: Cancer stem cells (CSCs), also known as tumor-initiating cells, are involved in tumor progression, metastasis, and drug resistance. Hybrid liposomes (HLs) are nano-sized liposomal particles that can be easily prepared by ultrasonicating a mixture of vesicular and micellar molecules in buffer solutions. In this study, we investigated the inhibitory effects of HL on the growth of CSC subpopulations in liver cancer cells (HepG2) in vitro. METHODS: HLs composed of 90 mol% L-α-dimyristoylphosphatidylcholine and 10 mol% polyoxyethylene(23) dodecyl ether were prepared by sonication. Cell viability was determined by the trypan blue exclusion assay. In liver cancer cells, CSCs were identified by the presence of the cell surface marker proteins CD133 and EpCAM by flow cytometry. A soft agar colony formation assay was performed using HepG2 cells pretreated with HLs. RESULTS: HLs selectively inhibited liver cancer cell growth without affecting normal hepatocytes. Additionally, HLs induced apoptosis of HepG2 cells by a"ctivating caspase-3. Notably, the CD133(+)/EpCAM(+) CSC sub-population of liver cancer cells treated with HLs was reduced. Furthermore, HLs markedly decreased the number of colony-forming cells. Finally, we confirmed the fusion and accumulation of HLs into the cell membranes of CSCs using a fluorescently labeled lipid (NBDPC). Significant accumulation of HL/NBDPC into the CSCs (particularly EpCAM(+) cells) occurred in a dose-dependent manner. CONCLUSION: These results suggest that HLs are a novel nanomedical therapeutic agent for targeting CSCs in liver cancer therapy.

Assessment of indirect inhalation exposure to formaldehyde evaporated from water.

Volatilization volumes and health risks associated with indirect inhalation exposure to formaldehyde evaporated from water have not been investigated quantitatively. We experimentally investigated formaldehyde volatility, compared with chloroform volatility, predicted formaldehyde inhalation exposure concentrations in Japanese bathrooms, and then re-evaluated drinking water quality standards. Although the Henry's law constant of formaldehyde is 1/104 that of chloroform, with a 30-min exposure period, the formaldehyde non-equilibrium partition coefficient (K'd) was 1/500th the chloroform value because of formaldehyde's faster volatilization rate. We used this ratio to estimate the cumulative probability distribution of formaldehyde concentrations in bathroom air. For a formaldehyde concentration in water of ≤2.6 mg/L-water (WHO tolerable concentration), the probability that the incremental formaldehyde concentration due to volatilization would exceed 100 µg/m3-air (WHO indoor air quality guideline) was low. However, major sources of formaldehyde in indoor air are building materials and furniture. We therefore calculated the allowable concentration in water by allocating a small percentage of the indoor air guideline value to indirect inhalation exposure via volatilization from tap water. With an allocation factor of 20% (10%), the allowable concentration was 0.52 (0.26) mg/L-water. These concentrations are similar to the Health Canada guideline concentration but they are 3-6 times the Japanese water quality standard.

Monte-Carlo and multi-exposure assessment for the derivation of criteria for disinfection byproducts and volatile organic compounds in drinking water: Allocation factors and liter-equivalents per day.

The probability distributions of total potential doses of disinfection byproducts and volatile organic compounds via ingestion, inhalation, and dermal exposure were estimated with Monte Carlo simulations, after conducting physiologically based pharmacokinetic model simulations to takes into account the differences in availability between the three exposures. If the criterion that the 95th percentile estimate equals the TDI (tolerable daily intake) is regarded as protecting the majority of a population, the drinking water criteria would be 140 (trichloromethane), 66 (bromodichloromethane), 157 (dibromochloromethane), 203 (tribromomethane), 140 (dichloroacetic acid), 78 (trichloroacetic acid), 6.55 (trichloroethylene, TCE), and 22 µg/L (perchloroethylene). The TCE criterion was lower than the Japanese Drinking Water Quality Standard (10 µg/L). The latter would allow the intake of 20% of the population to exceed the TDI. Indirect inhalation via evaporation from water, especially in bathrooms, was the major route of exposure to compounds other than haloacetic acids (HAAs) and accounted for 1.2-9 liter-equivalents/day for the median-exposure subpopulation. The ingestion of food was a major indirect route of exposure to HAAs. Contributions of direct water intake were not very different for trihalomethanes (30-45% of TDIs) and HAAs (45-52% of TDIs).

Trichloramine Removal with Activated Carbon Is Governed by Two Reductive Reactions: A Theoretical Approach with Diffusion-Reaction Models.

Mechanisms underlying trichloramine removal with activated carbon treatment were proven by batch experiments and theoretical analysis with diffusion-reaction models. The observed values of trichloramine and free chlorine were explained only by the model in which (1) both trichloramine and free chlorine were involved as reactants, (2) the removals of reactants were affected both by the intraparticle diffusion and by the reaction with activated carbon, and (3) trichloramine decomposition was governed by two distinct reductive reactions. One reductive reaction was expressed as a first-order reaction: the reductive reaction of trichloramine with the basal plane of PAC, which consists of graphene sheets. The other reaction was expressed as a second-order reaction: the reductive reaction of trichloramine with active functional groups located on the edge of the basal plane. Free chlorine competitively reacted with both the basal plane and the active functional groups. The fact that the model prediction succeeded even in experiments with different activated carbon doses, with different initial trichloramine concentrations, and with different sizes of activated carbon particles clearly proved that the mechanisms described in the model were reasonable for explaining trichloramine removal with activated carbon treatment.

Isotope microscopy visualization of the adsorption profile of 2-methylisoborneol and geosmin in powdered activated carbon.

Decreasing the particle size of powdered activated carbon may enhance its equilibrium adsorption capacity for small molecules and micropollutants, such as 2-methylisoborneol (MIB) and geosmin, as well as for macromolecules and natural organic matter. Shell adsorption, in which adsorbates do not completely penetrate the adsorbent but instead preferentially adsorb near the outer surface of the adsorbent, may explain this enhancement in equilibrium adsorption capacity. Here, we used isotope microscopy and deuterium-doped MIB and geosmin to directly visualize the solid-phase adsorbate concentration profiles of MIB and geosmin in carbon particles. The deuterium/hydrogen ratio, which we used as an index of the solid-phase concentration of MIB and geosmin, was higher in the shell region than in the inner region of carbon particles. Solid-phase concentrations of MIB and geosmin obtained from the deuterium/hydrogen ratio roughly agreed with those predicted by shell adsorption model analyses of isotherm data. The direct visualization of the localization of micropollutant adsorbates in activated carbon particles provided direct evidence of shell adsorption.

Selective elimination of tumorigenic cells from mixed culture of normal and tumorigenic cells using hybrid liposomes aimed at realizing of cell therapy.

While induced pluripotent stem (iPS) cells are expected to be a cell source for regenerative medicine, they also have tumorigenic properties owing to their proliferative potential. During the manufacturing of regenerative medicine products, undifferentiated iPS cells and malignant transformed cells may be mixed in the cell culture population. Therefore, it is essential to eliminate tumorigenic cells selectively. In this study, a mixed culture of normal human fetal hepatocytes (Hc cells) and human hepatocellular carcinoma cells (HuH-7 cells) was used as a cell population model to be used as regenerative medicine products, and the selective elimination of HuH-7 cells by hybrid liposomes (HL) was analyzed. HL tended to fuse and accumulate more in HuH-7 cells due to larger fluidity of plasma membrane for HuH-7 cells than that for Hc cells. In a mixed culture of Hc and HuH-7 cells, HL selectively eliminated HuH-7 cells while allowing Hc cells to remain viable. In addition, HL treatment for the mixed culture of Hc and HuH-7 cells suppressed the tumorigenicity of HuH-7 cells. Therefore, HL selectively fused and accumulated in tumorigenic cells in a mixed cell culture of normal and tumorigenic cells, and eliminated tumorigenic cells while allowing normal cells to remain viable. The results of this study suggest the potential of HL in eliminating tumorigenic cells during the manufacturing of regenerative medicine products. Thus, HL could be expected to contribute to the development of safe regenerative medical products. Supplementary Information: The online version contains supplementary material available at 10.1007/s10616-023-00613-y.

Combination of crystal growth with optical floating zone and evaluation of Nd3+:LaAlO3 crystals with the dynamic nuclear polarization of 139La and 27Al.

Producing a polarized lanthanum (La) target with high polarization and long relaxation time is crucial for realizing time-reversal violation experiments using polarized neutron beams. We use a LaAlO3 crystal doped with a small amount of Nd3+ ions for the polarized lanthanum target. Optimizing the amount of Nd3+ ions is considerably important because the achievable polarization and relaxation time strongly depend on this amount. We established a fundamental method to grow single crystals of Nd3+:LaAlO3 using an optical floating zone method that employs halogen lamps and evaluated the crystals with the dynamic nuclear polarization (DNP) method for polarizing nuclear spins. Two crystal samples were grown by ourselves and evaluated with the DNP at 1.3 K and 2.3 T for the first time, except for the target materials of protons. The enhancement of nuclear magnetic resonance signals for 139La and 27Al was successfully observed, and the enhancement factors were eventually 3.5 ± 0.3 and 13 ± 3 for the samples with Nd3+ ions of 0.05 and 0.01 mol. %, respectively. These enhancement factors correspond to absolute vector polarizations of 0.27% ± 0.02% (Nd3+ 0.05 mol. %) and 1.4% ± 0.3% (Nd3+ 0.01 mol. %). Although the obtained polarizations are still low, they are acceptable as a first step. The combination scheme of the crystal growth and the evaluation of the crystals is found to be effectively applicable for optimizing the amount of Nd3+ ions for improving the performance of the polarized target.

Relative source allocation of TDI to drinking water for derivation of a criterion for chloroform: a Monte-Carlo and multi-exposure assessment.

Drinking water quality standard (DWQS) criteria for chemicals for which there is a threshold for toxicity are derived by allocating a fraction of tolerable daily intake (TDI) to exposure from drinking water. We conducted physiologically based pharmacokinetic model simulations for chloroform and have proposed an equation for total oral-equivalent potential intake via three routes (oral ingestion, inhalation, and dermal exposures), the biologically effective doses of which were converted to oral-equivalent potential intakes. The probability distributions of total oral-equivalent potential intake in Japanese people were estimated by Monte Carlo simulations. Even when the chloroform concentration in drinking water equaled the current DWQS criterion, there was sufficient margin between the intake and the TDI: the probability that the intake exceeded TDI was below 0.1%. If a criterion that the 95th percentile estimate equals the TDI is regarded as both providing protection to highly exposed persons and leaving a reasonable margin of exposure relative to the TDI, then the chloroform drinking water criterion could be a concentration of 0.11mg/L. This implies a daily intake equal to 34% of the TDI allocated to the oral intake (2L/d) of drinking water for typical adults. For the highly exposed persons, inhalation exposure via evaporation from water contributed 53% of the total intake, whereas dermal absorption contributed only 3%.

Overlooked effect of ordinary inorganic ions on polyaluminum-chloride coagulation treatment.

Application of poly-aluminum chloride (PACl) coagulant is a popular mode of water treatment worldwide because of the high capacity of PACl to neutralize charge. The manufacture and use of PACls with various basicities in different regions around the world suggest that the characteristics of the raw water are important determinants of the efficacy of PACl application. However, attention has not been fully paid to the effects of water quality other than the substances to be removed. In this study, two typical PACls with different basicities were used to investigate why the performance of PACls depends on the characteristics of the raw water. We focused on the concentrations of inorganic ions in the raw water. Use of high-basicity PACl (HB-PACl) with a high content of polymeric-colloidal species (Alb+Alc) resulted in very slow floc formation and little turbidity removal in raw water with low concentrations of sulfate ions. The performance of the HB-PACl was inferior to that of normal-basicity PACl (NB-PACl), although the charge-neutralization capacity of the HB-PACl was higher. Rates of floc formation were strongly correlated with the rate of aluminum precipitation by hydrolysis reaction, which was identified as an indicator for evaluating the compatibility of raw water with PACl treatment. Among the common ions in natural water, the sulfate ion had the greatest ability to hydrolyze and precipitate PACl because of its divalency and tetrahedral structure. This conclusion followed from experimental results showing similar effects for selenate and chromate ions as for sulfate ions and somewhat smaller effects for thiosulfate ions. Bicarbonate ions and natural organic matter affected PACl hydrolysis-precipitation, but chloride ions, nitrate ions, and cations had little effect on PACl hydrolysis-precipitation. Interestingly, the abilities of sulfate ions to hydrolyze HB-PACl and NB-PACl were very similar, but bicarbonate ions were less effective in hydrolyzing HB-PACl than NB-PACl, and bicarbonate ions contributed little to the hydrolysis-precipitation of HB-PACl in raw water with normal alkalinity. Therefore, sufficient coagulation with HB-PACl therefore usually requires a certain concentration of sulfate ions in water to be treated. The implication is that which anions are most influential to the hydrolysis-precipitation of PACl, and thus to PACl's coagulation ability depends on the constituents of the PACl.

Removal of soluble divalent manganese by superfine powdered activated carbon and free chlorine: Development and application of a simple kinetic model of mass transfer-catalytic surface oxidation.

Catalytic oxidative removal of Mn2+ on activated-carbon surfaces by free chlorine was recently discovered and found to be potentially practicable for water treatment when using micrometer-sized activated carbon. Herein, we newly derived a kinetic model for trace-substance removal by catalytic reaction and applied it to the Mn2+ removal. External-film mass transfer, adsorption, and oxidation/desorption contributed similarly to the Mn2+ removal rate under actual practical conditions. The low removal rate in natural water was attributed to decreases in available adsorption sites: e.g., a 50% decrease in available sites in water with 0.26 mmol-Ca2+/L caused a 15% reduction in removal rate. Low temperature greatly reduced the removal rate by both enhancing the decrease in available sites and hindering mass transfer through increased viscosity. While adsorption sites differed 8-fold between different carbon particles, causing a 2.2-fold difference in removal rates, carbon particle size was more influential, with a >10-fold difference between 2- and 30-µm sizes.

Desorption of micropollutant from superfine and normal powdered activated carbon in submerged-membrane system due to influent concentration change in the presence of natural organic matter: Experiments and two-component branched-pore kinetic model.

Submerged-membrane hybrid systems (SMHSs) that combine membrane filtration with powdered activated carbon (PAC) take advantage of PAC's ability to adsorb and remove contaminants dissolved in water. However, the risk of contaminant desorption due to temporal changes in the influent concentration of the contaminant has not been thoroughly explored. In this study, we used a SMHS with conventionally-sized PAC or superfine PAC (SPAC) to remove 2-methylisoborneol (MIB), a representative micropollutant, from water containing natural organic matter (NOM), with the goal of elucidating adsorption-desorption phenomena in the SMHS. We found that 20-40% of the MIB that adsorbed on PAC and SPAC while the influent was contaminated with MIB (6 h, contamination period) desorbed to the liquid phase within 6 h from the time that the MIB-containing influent was replaced by MIB-free influent (no-contamination period). The percentage of desorption during the no-contamination period increased with increasing MIB breakthrough concentration during the contamination period. These findings indicate that the PAC/SPAC in the SMHS should be replaced while the breakthrough concentration is low, not only to keep a high removal rate but also to decrease the desorption risk. SPAC is fast in removal by adsorption, but it is also fast in release by desorption. SPAC (median diameter: 0.94 µm) showed almost the same adsorption-desorption kinetics as PAC (12.1 µm) of a double dose. A two-component branched-pore diffusion model combined with an IAST (ideal adsorbed solution theory)-Freundlich isotherm was used to describe and analyze the adsorption-desorption of MIB. The diffusivity of MIB molecules in the pores of the activated carbon particles decreased markedly in a short period of time. This decrease, which was attributed to fouling of the activated carbon in the SMHS by coagulant-treated water containing NOM, not only reduced the rate of MIB removal during the contamination period but also hindered the rate of MIB desorption during the no-contamination period and thus prevented the effluent MIB concentration from becoming high. On the other hand, coagulation did not change the concentration of NOM that competes with MIB for adsorption sites.

Effective drug delivery system for duchenne muscular dystrophy using hybrid liposomes including gentamicin along with reduced toxicity.

It is known that gentamicin (GM) could be a possible treatment for Duchenne Muscular Dystrophy (DMD). However, GM therapy has been hindered by several problems such as severe side effects of GM. In order to resolve these problems, we developed the drug delivery system (DDS) of GM using hybrid liposomes (HL) composed of L-α-dimyristoylphosphatidylcholine (DMPC) and polyoxyethylene(23) lauryl ether (C12(EO)23). The hydrodynamic diameters of HL including GM (GM-HL) were 60-90 nm with a narrow range of the size distribution and the sizes were kept almost constant for over 4 weeks, suggesting that GM-HL could avoid the reticuloendothelial system in vivo. Furthermore, GM-HL accumulated more to the skeletal muscle cells of X chromosome-linked muscular distrophy (mdx) mice as compared to those of normal mice. Significantly, we succeeded in increasing dystrophin positive fibers in skeletal muscle cells of mdx mice using GM-HL along with the reduction of ototoxicity. It is suggested that GM should be carried more efficiently into the muscular cells of mdx mice by HL. These results indicate that HL could be an effective carrier in the DDS of GM therapy for DMD.

Selection of priority pesticides in Japanese drinking water quality regulation: Validity, limitations, and evolution of a risk prediction method.

Several risk scoring and ranking methods have been applied for the prioritization of micropollutants, including pesticides, and in the selection of pesticides to be regulated regionally and nationally. However, the effectiveness of these methods has not been evaluated in Japan. We developed a risk prediction method to select pesticides that have a high probability of being detected in drinking water sources where no monitoring data is available. The risk prediction method was used to select new pesticides for the 2013 Primary List in the Japanese Drinking Water Quality Guidelines. Here, we examined the effectiveness of the method on the basis of the results of water quality examinations conducted by water supply authorities across Japan, and studied ways to improve the risk prediction method. Of the 120 pesticides in the 2013 Primary List, 80 were detected in drinking water sources (raw water entering water treatment plants). The rates of detection of the newly selected pesticides and previously listed pesticides were not significantly different: 64% and 68%, respectively. When the risk predictor was revised to incorporate degradability of dry-field pesticides and current pesticide sales data, the rate of detection of pesticides selected as having a high risk of detection improved from 72% to 88%. We prepared regional versions of the Primary List using the revised risk predictors and verified their utility. The number of listed pesticides varied greatly by region, ranging from 32 to 73; all regional lists were much shorter than the national Primary List. In addition, 55% to 100% of the pesticides detected in each region were included in a Regional Primary List. This work verifies the ability of the risk prediction method to screen pesticides and select those with a high risk of detection.

Selective elimination of tumorigenic hepatic stem cells using hybrid liposomes.

To avoid the risk of tumorigenesis after cell transplantation, tumorigenic stem cells should be selectively eliminated from induced pluripotent cells, embryonic stem cells, and somatic stem cells. We previously reported the presence of tumorigenic stem cells in human fetal hepatocyte-induced hepatoblasts after sodium butyrate (SB) treatment. In this study, we aimed to investigate the selective elimination of tumorigenic stem cells in human hepatoblasts using hybrid liposomes (HLs) prepared by sonicating a mixture of 90 mol% l-α-dimyristoylphosphatidylcholine and 10 mol% polyoxyethylene (n) dodecyl ether (C12 (EO)n, n = 23) in a buffer solution. Flow cytometric analysis revealed that the number of hepatoblasts increased by around 12-18 times in SB-treated cells compared to non-treated cells. In the colony formation assay, colonies of tumorigenic stem cells were observed in a soft agar plate after SB treatment. HL treatment for 48 h resulted in a remarkable decrease in the number of colonies. HLs also induced apoptosis of tumorigenic stem cells by activating caspase-3. Flow cytometry showed a significant accumulation of HLs, including fluorescent lipids, in tumorigenic hepatic stem cells. The reappearance of tumorigenic stem cells was suppressed even in subsequent subcultures of HL-treated cells. High CYP3A4 activity was observed in a three-dimensional in vitro assay. These results suggest that HL treatment could specifically eliminate tumorigenic hepatic stem cells. Incubation with HLs can be an effective culture method to maintain the quality of stem cells and reduce the risk of tumorigenesis after cell transplantation.

Stray particles as the source of residuals in sand filtrate: Behavior of superfine powdered activated carbon particles in water treatment processes.

Although superfine powdered activated carbon has excellent adsorption properties, it is not used in conventional water treatment processes comprising coagulation-flocculation, sedimentation, and sand filtration (CSF) due to concerns about its residual in treated water. Here, we examined the production and fate of very fine carbon particles with lacking in charge neutralization as a source of the residual in sand filtrate after CSF treatment. Almost all of the carbon particles in the water were charge-neutralized by coagulation treatment with rapid mixing, but a very small amount (≤0.4% of the initial concentration) of very fine carbon particles with a lesser degree of charge neutralization were left behind in coagulation process. Such carbon particles, defined as stray carbon particles, were hardly removed by subsequent flocculation and sedimentation processes, and some of them remained in the sand filtrate. The concentration of residual carbon particles in the sand filtrate varied similarly with that of the stray carbon particles. The stray and residual carbon particles were similarly smaller than the particles before coagulation treatment, but the residual carbon particles had less charge neutralization than the stray carbon particles. The turbidity of water samples collected after sedimentation was not correlated with the residual carbon concentration in the sand filtrate, even though it is often used as an indicator of treatment performance with respect to the removal of suspended matter. Based on these findings, we suggest that reduction of the amount of stray particles should be a performance goal of the CSF treatment. Examining this concept further, we confirmed that the residence time distributions in the coagulation and flocculation reactors influenced the concentration of stray carbon particles and then the residual carbon particle concentration in sand filtrate, but found that the effect was dependent on coagulant type. A multi-chambered-reactor configuration lowered both the stray carbon particle concentration after coagulation treatment and the residual carbon particle concentration in sand filtrate compared with a single-chambered reactor configuration. When a normal basicity PACl that consisted mainly of monomeric Al species was used, the stray carbon particle concentration was decreased during coagulation process and then gradually decreased during subsequent flocculation process because the monomeric Al species were transformed to colloidal Al species via polymeric Al species. In contrast, when a high-basicity PACl that consisted mostly of colloidal Al species was used, coagulation treatment largely decreased the stray carbon particle concentration, which did not decrease further during subsequent flocculation process. These findings will be valuable for controlling residual carbon particles after the CSF treatment.

Computational fluid dynamics-based modeling and optimization of flow rate and radiant exitance for 1,4-dioxane degradation in a vacuum ultraviolet photoreactor.

1,4-Dioxane is one of the most persistent organic micropollutants in conventional drinking-water-treatment processes. Vacuum ultraviolet (VUV) treatment is a promising means of removing micropollutants such as 1,4-dioxane from source water, but this approach has not yet been implemented in a full-scale water treatment plant, partly because the operating parameters for pilot and full-scale VUV photoreactors have not been optimized. Here, we developed a computational fluid dynamics-based method for optimizing VUV photoreactor performance through energy-based analyses that take into account the effects of two important operating parameters-flow rate and radiant exitance. First, we constructed a computational fluid dynamics model and determined the sole parameter required for the model, the pseudo-first-order rate constant for the reaction of 1,4-dioxane, by simple batch experiment. Then, we validated the model by using a pilot-scale flow-through annular photoreactor. Finally, we used the validated model to examine the effects of flow rate and radiant exitance on the efficiency of 1,4-dioxane degradation in a virtual annular photoreactor. Radiation efficiency, which was defined as the ratio of the logarithmic residual ratio of 1,4-dioxane to the theoretical minimum logarithmic residual ratio (best possible performance) under the given operating conditions, was calculated as an energy-based index of cost-effectiveness. Radiation efficiency was found to increase with increasing flow rate but decreasing radiant exitance. An electrical energy per order (EEO) analysis suggested that VUV treatment under laminar flow was most economical when low-power lamps and a high flow rate were used. In contrast, VUV treatment under turbulent flow was suggested to be most economical when high-power lamps were used at a high flow rate.

Differences in removal rates of virgin/decayed microplastics, viruses, activated carbon, and kaolin/montmorillonite clay particles by coagulation, flocculation, sedimentation, and rapid sand filtration during water treatment.

One of the main purposes of drinking water treatment is to reduce turbidity originating from clay particles. Relatively little is known about the removal of other types of particles, including conventionally sized powdered activated carbon (PAC) and superfine PAC (SPAC), which are intentionally added during the treatment process; microplastic particles; and viruses. To address this knowledge gap, we conducted a preliminary investigation in full-scale water treatment plants and then studied the removal of these particles during coagulation-flocculation, sedimentation, and rapid sand filtration (CSF) in bench-scale experiments in which these particles were present together. Numbers of all target particles were greatly decreased by coagulation-flocculation and sedimentation (CS). Subsequent rapid sand filtration greatly reduced the concentrations of PAC and SPAC but not the concentrations of viruses, microplastic particles, and clay particles. Overall removal rates by CSF were 4.6 logs for PAC and SPAC, 3.5 logs for viruses, 2.9 logs for microplastics, and 2.8 logs for clay. The differences in removals were not explained by particle sizes or zeta potentials. However, for clays, PAC and SPAC, for which the particle size distributions were wide, smaller particles were less efficiently removed. The ratios of both clay to PAC and clay to SPAC particles increased greatly after rapid sand filtration because removal rates of PAC and SPAC particles were about 2 logs higher than removal rates of clay particles. The trend of greater reduction of PAC concentrations than turbidity was confirmed by measurements made in 14 full-scale water purification plants in which residual concentrations of PAC in treated water were very low, 40-200 particles/mL. Clay particles therefore accounted for most of the turbidity in sand filtrate, even though PAC was employed. The removal rate of microplastic particles was comparable to that of clays. Sufficient turbidity removal would therefore provide comparable removal of microplastics. We investigated the effect of mechanical/photochemical weathering on the removal of microplastics via CSF. Photochemical weathering caused a small increment in the removal rate of microplastics during CS but a small reduction in the removal rate of microplastics during rapid sand filtration; mechanical weathering decreased the removal rate via CS but increased the removal rate via rapid sand filtration. The changes of removal of microplastics might have been caused by changes of their zeta potential.