Preparation of cellulose acetate based flexible separator and its application in zinc-air batteries.

Flexible solid-state zinc-air batteries as a wearable energy storage device with great potential, and their separators, which control ion permeability, inhibit zinc dendrite generation, and regulate catalytic active sites, have been developed as gel electrolyte separators with high retention of electrolyte uptake. However, the gel electrolyte separator still has problems such as poor affinity with the electrolyte and poor ionic conductivity, which limits its further application. In order to further improve the electrolyte absorption, ionic conductivity and mechanical strength of cellulose acetate(CA)/polyvinyl alcohol (PVA) nanofibers, TiO2was added to CA/PVA to increase the porosity, and glutaraldehyde (GA) was used to modify the CA/PVA/TiO2separator by acetal reaction with CA and PVA to make the molecules closely linked. The results shows that the optimal mass fractions of TiO2and GA were 2% and 5%, respectively. At this time, the porosity and absorption rate of the separator increased from 48% to 68.2% and 142.4% to 285.3%, respectively. The discharge capacity reached 179 mA cm-3, and the cycle stability rate was 89% after 7 stable constant current charge/discharge cycles.

Study on the Construction of Interlayer Adjustable C@MoS2 Fiber Anode by Biomass Confining and its Lithium/Sodium Storage Mechanism.

Building a stable and controllable interlayer structure is the key to improving the sodium storage cycling stability and rate performance of two-dimensional anode materials. This study explored the rich functional groups in bacterial cellulose culture medium in the way of biological self-assembly. Mo precursors were used to produce chemical bond in bacterial cellulose culture medium, and intercalation groups are introduced to achieve MoS2 localized nucleation and in situ localized construction of carbon intercalation stable interlaminar structure, thus improving ion transport dynamics and cycle stability. In order to avoid structural irreversibility of MoS2 at low potential, an extended voltage window of 1.5-4 V was selected for lithium/sodium intercalation testing. It was found that there was a significant improvement in sodium storage capacity and stability. During the electrochemical cycling process, in-situ Raman testing revealed that the structure of MoS2 was completely reversible, and the intensity changes of MoS2 characteristic peaks showed in-plane vibration without involving interlayer bonding fracture. Moreover, after the lithium sodium was removed from the intercalation C@MoS2 all structures have good retention.