ABSTRACT
Here, we demonstrate for the first time the ability of a porous π-conjugated semiconducting polymer film to enable facile electrolyte penetration through vertically stacked redox-active polymer layers, thereby enabling electrochromic switching between p-type and/or n-type polymers. The polymers P1 and P2, with structures diketopyrrolopyrrole (DPP)-πbridge-3,4,-ethylenedioxythiophene (EDOT)-πbridge [πbridge = 2,5-thienyl for P1 and πbridge = 2,5-thiazolyl for P2] are selected as the p-type polymers and N2200 (a known naphthalenediimide-dithiophene semiconductor) as the n-type polymer. Single-layer porous and dense (control) polymer films are fabricated and extensively characterized using optical microscopy, atomic force microscopy, scanning electron microscopy, and grazing incidence wide-angle X-ray scattering. The semiconducting films are then incorporated into single and multilayer electrochromic devices (ECDs). It is found that when a p-type (P2) porous top layer is used in a multilayer ECD, it enables electrolyte penetration to the bottom layer, enabling oxidative electrochromic switching of the P1 bottom layer at low potentials (+0.4 V versus +1.2 V with dense P2). Importantly, when using a porous P1 as the top layer with an n-type N2200 bottom layer, dynamic oxidative-reductive electrochromic switching is also realized. These results offer a proof of concept for development of new types of multilayer electrochromic devices where precise control of the semiconductor film morphology and polymer electronic structure is essential.
ABSTRACT
A series of donor-π-acceptor-π-donor (D-π-A-π-D) compounds based on naphthalendiimide (NDI) and perylenediimide (PDI) central cores combined with triphenylamine and phenylcarbazole donor groups have been synthesized, characterized and tested in top-contact/bottom gate organic field-effect transistors (OFETs). The results showed high electron mobilities, up to 0.3â cm2 V-1 s-1 , in the case of NDI derivatives and moderate values of around 10-3 â cm2 V-1 s-1 for PDI-based semiconductors. Quantum chemical calculations were performed in order to support the experimental data. The results suggest that adequate molecular characteristics and larger crystalline domains in NDI vs. PDI semiconducting films may be the reasons behind the enhanced electrical properties of NDI derivatives. Furthermore, when the lateral donor substituents are triphenylamine groups, the mobilities were slightly higher in comparison to phenylcarbazole donor groups due to an improved electron-donating character. Other characterization techniques, such as AFM, X-ray diffraction or spectroelectrochemistry, among others, have been performed to analyze supramolecular order, charge carriers' nature and stability, parameters closely related to charge transport characteristics.
ABSTRACT
In this work, as an equivocal proof of the potential of microwave irradiation in organic synthesis, a complex pyrazine-decorated benzotriazole derivative that is challenging to prepare under conventional conditions has been obtained upon microwave irradiation, thus efficiently improving the process and yields, dramatically decreasing the reaction times and resulting in an environmentally friendly synthetic procedure. In addition, this useful derivative could be applied in organic electronics, specifically in organic field-effect transistors (OFETs), exhibiting the highest electron mobilities reported to date for benzotriazole discrete molecules, of around 10-2 cm2V-1s-1.
Subject(s)
Microwaves , Semiconductors , Electrons , Transistors, Electronic , TriazolesABSTRACT
Three crystalline N-trimethyltriindoles endowed with different functionalities at 3, 8 and 13 positions (either unsubstituted or with three methoxy or three acetyl groups attached) are investigated, and clear correlations between the electronic nature of the substituents and their solid-state organization, electronic properties and semiconductor behavior are established. The three compounds give rise to similar columnar hexagonal crystalline structures; however, the insertion of electron-donor methoxy groups results in slightly shorter stacking distances when compared with the unsubstituted derivative, whereas the insertion of electron-withdrawing acetyl groups lowers the crystallinity of the system. Functionalization significantly affects hole mobilities with the triacetyl derivative showing the lowest mobility within the series in agreement with the lower degree of order. However, attaching three methoxy groups also results in lower hole mobility values in the OFETs (0.022 vs. 0.0014 cm2 V-1 s-1) in spite of the shorter stacking distances. This counterintuitive behavior has been explained with the help of DFT calculations performed to rationalize the interplay between the intramolecular and intermolecular properties, which point to lower transfer integrals in the trimethoxy derivative due to the HOMO wave function extension over the peripheral methoxy groups. The results of this study provide useful insights into how peripheral substituents influence the fundamental charge transport parameters of chemically modified triindole platforms of fundamental importance to design new derivatives with improved semiconducting performance.
ABSTRACT
Four difluorenoheteroles having a central quinoidal core with the heteroring varying as furan, thiophene, its dioxide derivative and pyrrole have shown to be medium character diradicals. Solid-state structures, optical, photophysical, magnetic, and electrochemical properties have been discussed in terms of diradical character, variation of aromatic character and captodative effects (electron affinity). Organic field-effect transistors (OFETs) have been prepared, showing balanced hole and electron mobilities of the order of 10-3 â cm2 V-1 s-1 or ambipolar charge transport which is first inferred from their redox amphoterism. Quantum chemical calculations show that the electrical behavior is originated from the medium diradical character which produces similar reorganization energies for hole and electron transports. The vision of a diradical as simultaneously bearing pseudo-hole and pseudo-electron defects might justify the reduced values of reorganization energies for both regimes. Structure-function relationships between diradical and ambipolar electrical behavior are revealed.
ABSTRACT
New organic semiconductors are essential for developing inexpensive, high-efficiency, solution-processable polymer solar cells (PSCs). PSC photoactive layers are typically fabricated by film-casting a donor polymer and a fullerene acceptor blend, with ensuing solvent evaporation and phase separation creating discrete conduits for photogenerated holes and electrons. Until recently, n-type fullerene acceptors dominated the PSC literature; however, indacenodithienothiophene (IDTT)-based acceptors have recently enabled remarkable PSC performance metrics, for reasons that are not entirely obvious. We report two isomeric IDTT-based acceptors 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-benz-(5, 6)indanone))-5,5,11,11-tetrakis(4-nonylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']di-thiophene (ITN-C9) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-benz(6,7)indanone))-5,5,11,11-tetrakis(4-nonylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITzN-C9) that shed light on the exceptional IDTT properties vis-à-vis fullerenes. The neat acceptors and blends with fluoropolymer donor poly{[4,8-bis[5-(2- ethylhexyl)-4-fluoro-2-thienyl]benzo[1,2-b:4,5-b']dithiophene2,6-diyl]-alt-[2,5-thiophenediyl[5,7-bis(2-ethylhexyl)-4,8-dioxo4H,8H-benzo[1,2-c:4,5-c']dithiophene-1,3-diyl]]} (PBDB-TF) are investigated by optical spectroscopy, cyclic voltammetry, thermogravimetric analysis, differential scanning calorimetry, single-crystal X-ray diffraction, photovoltaic response, space-charge-limited current transport, atomic force microscopy, grazing incidence wide-angle X-ray scattering, and density functional theory-level quantum chemical analysis. The data reveal that ITN-C9 and ITzN-C9 organize such that the lowest unoccupied molecular orbital-rich end groups have intermolecular π-π distances as close as 3.31(1) Å, with electronic coupling integrals as large as 38 meV, and internal reorganization energies as small as 0.133 eV, comparable to or superior to those in fullerenes. ITN-C9 and ITzN-C9 have broad solar-relevant optical absorption, and, when blended with PBDB-TF, afford devices with power conversion efficiencies near 10%. Performance differences between ITN-C9 and ITzN-C9 are understandable in terms of molecular and electronic structure distinctions via the influences on molecular packing and orientation with respect to the electrode.
ABSTRACT
This work reports on a quinodimethane-type molecule, 2,7-dicyanomethylene-9-(2-ethylhexyl)carbazole (1), one of the shortest π-conjugated biradicaloids reported to be stable in solution under ambient conditions. This carbazole-based quinoidal precursor is able to form a macrocyclic σ-bonded tetramer (2). The resolved single-crystal X-ray structure of tetramer 2 shows that four molecules of 1 are linked together through four long (CN)2 C-C(CN)2 bonds (1.631â Å) resulting from coupling of the unpaired electrons in biradicaloid 1. Dynamic interconversion between monomer 1 and cyclophane tetramer 2 is achieved by reversible cleavage and recovery of the four (CN)2 C-C(CN)2 bonds upon soft external stimuli (light absorption, temperature and pressure), which is accompanied by significant color changes. These novel photo-, thermo-, and mechanochromic properties expand the versatility of π-conjugated biradicaloid compounds as novel functional materials that, in combination with spin chemistry and dynamic covalent chemistry, can be relevant in molecular machines, sensors, and switches.
ABSTRACT
Inversion of the connections of amidine linkers combined with controlled oligothiophene chain catenation in oligothiophene-naphthalimide assemblies provides an efficient method to tune the HOMO and LUMO values in this type of assemblies. This modification also suppresses the intramolecular charge transfer (ICT) band normally found in this type of derivatives, also delocalizing the frontier molecular orbitals over the whole conjugated skeleton. The resultant assemblies were used in the fabrication of field-effect transistors, which showed well-balanced ambipolar transport.
ABSTRACT
The synthesis, characterization, and optical properties of a novel star-shaped oligothiophene with a central rigid trithienobenzene (BTT) core and diketopyrrolopyrrole (DPP) units are reported and compared with homologous linear systems based on the benzodithiophene (BDT) and the naphthodithiophene (NDT) units end capped with DPPs. This comparison is aimed at elucidating the effect of the star-shaped configuration versus linear conformation on the optical and electrical properties. Electronic and vibrational spectroscopies, together with transient absorption spectroscopy, scanning electronic microscopy, and DFT calculations are used to understand not only the molecular properties of these semiconductors, but also to analyze the supramolecular aggregation in these derivatives. We conclude that although the subject star-shaped derivative is not optimal in terms of π-conjugation, its extended BTT unit significantly favors intermolecular π-stacking interactions, which is interesting for their applications in devices. Field-effect transistors and solar cells were fabricated with these new molecular semiconductors and the performance difference discussed.
ABSTRACT
As effective building blocks for high-mobility transistor polymers, oligothiophenes are receiving attention for polymer solar cells (PSCs) because the resulting polymers can effectively suppress charge recombination. Here we investigate two series of in-chain donor-acceptor copolymers, PTPDnT and PBTInT, based on thieno[3,4-c]pyrrole-4,6-dione (TPD) or bithiopheneimide (BTI) as electron acceptor units, respectively, and oligothiophenes (nTs) as donor counits, for high-performance PSCs. Intramolecular S···O interaction leads to more planar TPD polymer backbones, however backbone torsion yields greater open-circuit voltages for BTI polymers. Thiophene addition progressively raises polymer HOMOs but marginally affects their band gaps. FT-Raman spectra indicate that PTPDnT and PBTInT conjugation lengths scale with nT catenation up to n = 3 and then saturate for longer oligomer. Furthermore, the effects of oligothiophene alkylation position are explored, revealing that the alkylation pattern greatly affects film morphology and PSC performance. The 3T with "outward" alkylation in PTPD3T and PBTI3T affords optimal π-conjugation, close stacking, long-range order, and high hole mobilities (0.1 cm(2)/(V s)). These characteristics contribute to the exceptional â¼80% fill factors for PTPD3T-based PSCs with PCE = 7.7%. The results demonstrate that 3T is the optimal donor unit among nTs (n = 1-4) for photovoltaic polymers. Grazing incidence wide-angle X-ray scattering, transmission electron microscopy, and time-resolved microwave conductivity measurements reveal that the terthiophene-based PTPD3T blend maintains high crystallinity with appreciable local mobility and long charge carrier lifetime. These results provide fundamental materials structure-device performance correlations and suggest guidelines for designing oligothiophene-based polymers with optimal thiophene catenation and appropriate alkylation pattern to maximize PSC performance.
ABSTRACT
Oligomers of ethylendioxythiophene-vinylene have been prepared. Their optical, electrochemical and chemical properties have been studied in detail by absorption and emission spectroscopy as well as cyclic voltammetry, Raman techniques and spectroelectrochemistry complemented with quantum chemical calculations. A comparison with their non-ethylendioxy and non-vinylene parents has been done. The inclusion of the EDO plus the vinylene function generates more robust electronic ground states regarding the largely flexible thiophene-vinylene (n TV) oligomeric homologues. The redox features of the new compounds are also rich of oxidative processes arising as an interesting stabilising balance effect between the oxygen fragment in the EDO groups (mesomeric effect) and the linear π-conjugated structure. The oxidised species have been characterised, which show the ability for the formation of mixed valence charge-transfer complexes and π dimers of different oxidation states, in particular, in the electrochemical medium, resulting that the electrochemical response is accounted for a succession of aggregation and electron-transfer steps. With this work, a full understanding of the optical and electronic properties of these new oligomers in the context of the oligomer approach has been proposed.
ABSTRACT
A new family of naphthalimide-fused thienopyrazine derivatives for ambipolar charge transport in organic field-effect transistors is presented. Their electronic and molecular structures were elucidated through optical and vibrational spectroscopy aided by DFT calculations. The results indicate that these compounds have completely planar molecular skeletons which promote good film crystallinity and low reorganization energies for both electron and hole transport. Their performance in organic field-effect transistors is compared with twisted and planar naphthaleneamidine monoimide-fused terthiophenes in order to understand the origin of ambipolarity in this new series of molecular semiconductors.
ABSTRACT
The main chemical, spectroscopic and material research done in tetracyano quinoidal oligothiophenes in the last 30 years has been reviewed. Their use as semiconducting substrates in organic electronic and their versatility to act as multifunctional materials have been highlighted. This tutorial review has been paralleled by the description of the main findings provided by Raman spectroscopy, in particular, associated with the discovery of the intrinsic diradical properties inherent to the pro-aromatic character of the quinoidal arrangement. It turns out that the fascinating properties of these materials are the manifestation of the diradical fingerprint behind a rather unconventional electronic structure.
ABSTRACT
The development of n-type organic semiconductors critically relies on the design and synthesis of highly electron-deficient building blocks with good solubility and small steric hindrance. We report here a strongly electron-deficient dithienylpyrazinediimide (TPDI) and its n-type semiconducting polymers. The pyrazine substitution leads to the resulting polymers with much lower-lying lowest unoccupied molecular orbital (LUMO) levels and improved backbone planarity compared to the reported dithienylbenzodiimide (TBDI)- and fluorinated dithienylbenzodiimide (TFBDI)-based polymer analogues, thus yielding n-type transport character with an electron mobility up to 0.44 cm2 V-1 s-1 in organic thin-film transistors. These results demonstrate that dithienylpyrazinediimide is a highly promising electron-deficient building block for constructing high-performance n-type polymers and the incorporation of pyrazine into imide-functionalized (hetero)arenes is an effective strategy to develop n-type polymers with deep-lying frontier molecular orbital (FMO) levels for organic optoelectronic devices.
ABSTRACT
Understanding the relationship between molecular/macromolecular architecture and organic thin film transistor (TFT) performance is essential for realizing next-generation high-performance organic electronics. In this regard, planar π-conjugated, electron-neutral (i.e., neither highly electron-rich nor highly electron-deficient) building blocks represent a major goal for polymeric semiconductors, however their realization presents synthetic challenges. Here we report that an easily accessible (minimal synthetic steps), electron-neutral thienyl-vinylene (TVT)-based building block having weak intramolecular S···O "conformational locks" affords a new class of stable, structurally planar, solution-processable, high-mobility, molecular, and macromolecular semiconductors. The attraction of merging the weak TVT electron richness with supramolecular planarization is evident in the DFT-computed electronic structures, favorable MO energetics, X-ray diffraction-derived molecular structures, experimental lattice coehesion metrics, and excellent TFT performance. TVT-based polymer TFTs exhibit stable carrier mobilities in air as high as 0.5 and 0.05 cm(2)/V·s (n- and p-type, respectively). All-TVT polymer-based complementary inverter circuitry exhibiting high voltage gains (~50) and ring oscillator circuitry with high f(osc)(~1.25 kHz) is readily fabricated from these materials by simple inkjet printing.
ABSTRACT
Rational creation of polymeric semiconductors from novel building blocks is critical to polymer solar cell (PSC) development. We report a new series of bithiopheneimide-based donor-acceptor copolymers for bulk-heterojunction (BHJ) PSCs. The bithiopheneimide electron-deficiency compresses polymer bandgaps and lowers the HOMOs--essential to maximize power conversion efficiency (PCE). While the dithiophene bridge progression R(2)SiâR(2)Ge minimally impacts bandgaps, it substantially alters the HOMO energies. Furthermore, imide N-substituent variation has negligible impact on polymer opto-electrical properties, but greatly affects solubility and microstructure. Grazing incidence wide-angle X-ray scattering (GIWAXS) indicates that branched N-alkyl substituents increased polymer π-π spacings vs linear N-alkyl substituents, and the dithienosilole-based PBTISi series exhibits more ordered packing than the dithienogermole-based PBTIGe analogues. Further insights into structure-property-device performance correlations are provided by a thieno[3,4-c]pyrrole-4,6-dione (TPD)-dithienosilole copolymer PTPDSi. DFT computation and optical spectroscopy show that the TPD-based polymers achieve greater subunit-subunit coplanarity via intramolecular (thienyl)S···O(carbonyl) interactions, and GIWAXS indicates that PBTISi-C8 has lower lamellar ordering, but closer π-π spacing than does the TPD-based analogue. Inverted BHJ solar cells using bithiopheneimide-based polymer as donor and PC(71)BM as acceptor exhibit promising device performance with PCEs up to 6.41% and V(oc) > 0.80 V. In analogous cells, the TPD analogue exhibits 0.08 V higher V(oc) with an enhanced PCE of 6.83%, mainly attributable to the lower-lying HOMO induced by the higher imide group density. These results demonstrate the potential of BTI-based polymers for high-performance solar cells, and provide generalizable insights into structure-property relationships in TPD, BTI, and related polymer semiconductors.
ABSTRACT
This work investigates the evolution of the molecular, vibrational, and optical properties within a family of carbonyl-functionalized quaterthiophenes: 5,5'''-diheptanoyl-2,2':5',2'':5'',2'''-quaterthiophene (1), 5,5'''-diperfluorohexylcarbonyl-2,2':5',2'':5'',2'''-quaterthiophene (2), and 2,7-[bis(5-perfluorohexylcarbonylthien-2-yl)]-4H-cyclopenta[2,1-b:3,4-b']-dithiophene-4-one (3). The analysis is performed by Raman and UV/Vis absorption/excitation/fluorescence spectroscopy in combination with density functional calculations. Theoretical calculations show that substitution with carbonyl groups and perfluorohexyl chains induces progressive quinoidization of the π-conjugated backbone in comparison to the carbonyl-free compound 5,5'''-dimethyl-2,2':5',2'':5'',2'''-quaterthiophene (DM-4T) used as reference. Raman spectra are dominated by a strong Raman line which mainly corresponds to a combination of C-C/C=C stretching vibrations spreading over the whole thiophene core. This band undergoes a remarkable downshift as a consequence of the structural changes induced by the electron-withdrawing groups on the π-conjugated backbone. The band splitting on incorporation of a central carbonyl bridge evidences the formation of two structural domains in the molecule. The excitation and fluorescence spectra recorded at low temperature show well-resolved vibronic structures associated with the most intense collective C-C/C=C stretching mode. Optical absorption and fluorescence bands exhibit remarkable bathochromic dispersion on carbonyl functionalization, indicative of extension of π conjugation. TDDFT calculations enable a detailed description of the trends observed in the absorption spectra. Resonance Raman spectra reflect the structural changes predicted for the S(0)âS(1) electronic transition and evidence the cross-conjugated character that the central carbonyl group confers on 3.
ABSTRACT
The synthesis, structural, electrochemical, and thin film electrical and electronic structural properties of a series of arylene diimide-oligothiophene n-type semiconductors are reported. This family of compounds allows analysis of the effects on thin film transistor performance of the following: (i) oligothiophene backbone catenation; (ii) naphthalenediimide vs perylenediimide core interchange; (iii) phenylene group introduction in the oligothiophene backbone. Electrochemical experiments indicate similar redox energetics for all members of this series, while thin film transistor measurements reveal markedly different charge transport performances. The highest electron mobility of 0.35 cm(2) V(-1) s(-1) is recorded for films of benzo[lmn]thieno[3',4':4,5]imidazo[2,1-b][3,8]phenanthroline-1,3,6(2H)-trione, 2-octyl (NDI-1T). Solution-processed field effect transistors were also fabricated and surprisingly exhibit electrical performances surpassing that of the vapor-deposited films in the case of isoquino[6',5',4':10,5,6]anthra[2,1,9-def]thieno[3',4':4,5]imidazo[2,1-a]isoquinoline-1,3,8(2H)-trione, 2-(1-heptyloctyl)-10,12-di-2-thienyl (PDI-3T).
ABSTRACT
A family of quinoidal oligothiophenes, from the dimer to the hexamer, with fused bis(butoxymethyl)cyclopentane groups has been extensively investigated by means of electronic and vibrational spectroscopy, electrochemical measurements, and density functional calculations. The latter predict that the electronic ground state always corresponds to a singlet state and that, for the longest oligomers, this state has biradical character that increases with increasing oligomer length. The shortest oligomers display closed-shell quinoidal structures. Calculations also predict the existence of very low energy excited triplet states that can be populated at room temperature. Aromatization of the conjugated carbon backbone is the driving force that determines the increasing biradical character of the ground state and the appearance of low-lying triplet states. UV/Vis, Raman, IR, and electrochemical experiments support the aromatic biradical structures predicted for the ground state of the longest oligomers and reveal that population of the low-lying triplet state accounts for the magnetic activity displayed by these compounds.
ABSTRACT
A series of four oligomers of cyclopentadithiophene-vinylenes end capped with pyridine groups was prepared and their optical and electronic properties studied. Treatment with trifluoroacetic acid (TFA) leads to the bisprotonation of the nitrogens of the pyridine, which has an important impact on the optical properties. Excess treatment with TFA provokes the oxidation of the conjugated core, generating radical cations and dications. The ease of the TFA treatment in solution was extended to protonation in the solid-state where further characterization of the neutral and TFA-treated samples was carried out in electrically active substrates in organic field-effect transistors. Finally, the new molecules were found to be excellent conductors in single-molecule junctions thanks to strong electron delocalization and resonance orbital mediated transport. These studies show the opening of a spectrum of possibilities by suitable terminal substitution of π-cores.