Augmentation of keratinized tissue using autogenous soft-tissue grafts and collagen-based soft-tissue substitutes at teeth and dental implants: Histological findings in a pilot pre-clinical study.

AIM: To histomorphometrically assess three treatment modalities for gaining keratinized tissue (KT) at teeth and at dental implants. MATERIALS AND METHODS: In five dogs, the distal roots of the mandibular second, third and fourth premolars were extracted. Dental implants were placed at the distal root areas 2 months later. After another 2 months, KT augmentation was performed at both distal (implants) and at mesial root (teeth) areas in the presence (wKT groups) or absence (w/oKT groups) of a KT band at the mucosal/gingival level. Three treatment modalities were applied randomly: apically positioned flap only (APF), free gingival grafts (FGGs) and xenogeneic collagen matrices (XCMs). A combination of the above produced six groups. Two months later, tissue sections were harvested and analysed histomorphometrically. RESULTS: The median KT height and length were greatest at implants with FGG in both wKT (3.7 and 5.1 mm, respectively) and w/oKT groups (3.7 and 4.6 mm), and at teeth with FGG in wKT groups (3.7 and 6.1 mm) and with APF in the w/oKT groups (3.9 and 4.4 mm). The XCM and APF produced more favourable results at teeth than at implants. CONCLUSIONS: FGG was advantageous in gaining KT, especially at implants.

Deep learning-based clinical decision support system for gastric neoplasms in real-time endoscopy: development and validation study.

BACKGROUND : Deep learning models have previously been established to predict the histopathology and invasion depth of gastric lesions using endoscopic images. This study aimed to establish and validate a deep learning-based clinical decision support system (CDSS) for the automated detection and classification (diagnosis and invasion depth prediction) of gastric neoplasms in real-time endoscopy. METHODS : The same 5017 endoscopic images that were employed to establish previous models were used for the training data. The primary outcomes were: (i) the lesion detection rate for the detection model, and (ii) the lesion classification accuracy for the classification model. For performance validation of the lesion detection model, 2524 real-time procedures were tested in a randomized pilot study. Consecutive patients were allocated either to CDSS-assisted or conventional screening endoscopy. The lesion detection rate was compared between the groups. For performance validation of the lesion classification model, a prospective multicenter external test was conducted using 3976 novel images from five institutions. RESULTS : The lesion detection rate was 95.6 % (internal test). On performance validation, CDSS-assisted endoscopy showed a higher lesion detection rate than conventional screening endoscopy, although statistically not significant (2.0 % vs. 1.3 %; P = 0.21) (randomized study). The lesion classification rate was 89.7 % in the four-class classification (advanced gastric cancer, early gastric cancer, dysplasia, and non-neoplastic) and 89.2 % in the invasion depth prediction (mucosa confined or submucosa invaded; internal test). On performance validation, the CDSS reached 81.5 % accuracy in the four-class classification and 86.4 % accuracy in the binary classification (prospective multicenter external test). CONCLUSIONS : The CDSS demonstrated its potential for real-life clinical application and high performance in terms of lesion detection and classification of detected lesions in the stomach.

Interdisciplinary Approach to Treat Unusual Development of Dens Evaginatus: A Case Report.

The present case report describes a rare case of dens evaginatus on the labial surface of mandibular incisor and interdisciplinary management including endodontic and periodontal treatment. A 10-year-old girl presented unusual whitish tubercle-like structure penetrated through the buccal gingiva of mandibular later incisor. In cone-beam computed tomographic view, pulpal tissue was extended from the principal root to the tubercle. Following full thickness flap reflection, the tubercle was carefully removed, resulting in dentin and pin-point pulp exposure. In order to prevent pulp necrosis and facilitate periodontal attachment to this area, Biodentine and enamel matrix derivative were applied. Gingival defect was compensated using a collagen matrix. Up to 2 years, harmonious gingiva state and no loss of tooth vitality were observed. In summary, dens evaginatus on mandibular later incisor could be successfully treated by means of interdisciplinary approach.

A randomized, double-blind, placebo-controlled multicenter study for evaluating the effects of fixed-dose combinations of vitamin C, vitamin E, lysozyme, and carbazochrome on gingival inflammation in chronic periodontitis patients.

BACKGROUND: To evaluate gingival inflammation from fixed-dose combinations of vitamin C, vitamin E, lysozyme and carbazochrome (CELC) in the treatment of chronic periodontitis following scaling and root planing. METHODS: One hundred patients were randomly assigned to receive CELC (test) or placebo (control) for the first 4 weeks at a 1:1 ratio, and both groups received CELC for the remaining 4 weeks. Primary outcome was the mean change in the gingival index (GI) after 4 weeks. Secondary outcomes included mean change in GI after 8 weeks and plaque index, probing depth, clinical attachment level, and VAS at 4 weeks and 8 weeks. RESULTS: Ninety-three patients completed the study. The GI in the test group significantly decreased after 4 weeks (p < 0.001) and 8 weeks (p < 0.001). The mean change from baseline in GI significantly decreased in the test group compared to the control group after 4 weeks (p = 0.015). In the GEE model adjusting for age, gender and visits, the test group showed 2.5 times GI improvement compared to the control group (p = 0.022). CONCLUSIONS: Within the study, CELC showed a significant reduction in gingival inflammation compared with a placebo. Other parameters, however, were similar between groups. TRIAL REGISTRATION: KCT0001366 (Clinical Research Information Service, Republic of Korea) and 29 Jan 2015, retrospectively registered.

Sinus floor elevation in sites with a perforated schneiderian membrane: What is the effect of placing a collagen membrane in a rabbit model?

OBJECTIVE: To investigate the healing following sinus grafting in sites with a perforated schneiderian membrane repaired using a collagen membrane, compared to control sites without membrane perforation. MATERIALS & METHODS: Following elevation of the sinus membrane in 16 rabbits, each sinus was assigned to one of the following groups: (a) intentional schneiderian membrane perforation, followed by the placement of a collagen membrane and bone grafting (group SMP) and (b) bone grafting without a perforation of the schneiderian membrane and without a collagen membrane placement (control group). At 2 and 4 weeks (n = 8 for each time-point), microcomputed tomographic (micro-CT) and histomorphometric analyses were performed. RESULTS: Overall new bone formation in group SMP was significantly delayed compared to the control group at 2 and 4 weeks (1.58 ± 1.25% vs. 9.23 ± 2.69% at 2 weeks, 10.43 ± 3.55 vs. 17.86 ± 4.11% at 4 weeks, p < 0.05). At 2 weeks, new bone formation for the areas close to lateral (1.19 ± 2.02%) and medial sinus bone walls (3.17 ± 1.98%) was markedly delayed in group SMP compared to the control group (13.08 ± 6.13% and 12.75 ± 5.63%, respectively, p < 0.05), but there was no statistical difference in those areas at 4 weeks (p > 0.05). The augmented volumes at 2 and 4 weeks were not statistically significantly different in both groups. CONCLUSION: The perforation of the schneiderian membrane and the repair using a collagen membrane delayed new bone formation in the augmented sinuses. However, the extension of the collagen membrane on the sinus bone walls was also attributable to this delayed bone formation.

Validity of Collagen Plugs for Ridge Preservation in a Canine Model.

PURPOSE: The purpose of the present study was to evaluate healing outcomes after collagen plug insertion in extraction-related defects. MATERIALS AND METHODS: The third and fourth mandibular premolars in canines were extracted, and the septal bone was removed. The following treatments were performed for the defects: porcine atelo-collagen plug, bovine atelo-collagen plug, and no intervention (control). The experimental animals were killed after 6, 12, or 24 weeks (n = 4, respectively). Histologic and histomorphometric analyses were performed. RESULTS: Clinical healing was uneventful, and no difference was detected among the 3 groups. Histologically, similar healing patterns were observed in all groups. Gingival healing was complete at 6 weeks, but discontinuity in the buccal crestal bone was observed. At 12 weeks, various degrees of buccal bone depression and increase in bone marrow were observed. At 24 weeks, no further healing was observed. Histomorphometrically, the ridge width at 1, 3 and 5 mm levels below the crest and the ridge dimensions 1, 3, and 5 mm above the level were not statistically different among groups or healing periods. CONCLUSION: The healing following the use of collagen plug in the extraction socket may correspond to the natural healing after extraction.

Comparison of three approaches for treating the bony access window in lateral sinus floor elevation: a retrospective analysis.

The aim of this study was to retrospectively determine the effects of applying different treatment methods to the bony access window on the healing outcomes in lateral sinus floor elevation (SFE). Lateral SFE with implant placement was performed in 131 sinuses of 105 patients. The following three treatment methods were applied to the bony access window: application of a collagen barrier (group CB), repositioning the bone fragment (group RW) and untreated (group UT). Radiographic healing in the window area, augmented bone height changes and marginal bone level changes were examined. Mixed logistic and mixed linear models were analyzed. Over 4.3 ± 1.4 years of follow-up, the implant survival rate was 100% in groups CB and UT, and 96.9% in group RW. The treatment applied to the window did not significantly influence the radiographic healing in the window area, augmented bone height changes or marginal bone level changes (p > 0.05). The healed window areas had generally flat morphologies and were fully corticalized. The mean changes in the augmented bone were less than 1.5 mm in all groups. Marginal bone level changes were minimal. In conclusion, Healing outcomes were not different among three different methods to treat the bony access window in lateral SFE.

Soft-tissue volume augmentation using a connective tissue graft and a volume-stable collagen matrix with polydeoxyribonucleotide for immediate implant placement: a pilot study in a dog model.

PURPOSE: The aims of this study were 1) to investigate the effects of a subepithelial connective tissue graft (SCTG) and a volume-stable collagen matrix (VCMX) on soft-tissue volume gain in the immediate implant placement protocol, and 2) to determine whether polydeoxyribonucleotide (PDRN) can enhance the effects of a VCMX. METHODS: Dental implants were placed in 4 mongrel dogs immediately after extracting the distal roots of their third and fourth mandibular premolars. The gap between the implant and the buccal bone plate was filled with synthetic bone substitute particles. The following soft-tissue augmentation modalities were applied buccally: 1) control (no augmentation), 2) SCTG, 3) VCMX, and 4) VCMX/PDRN. After 4 months, histomorphometric analysis was performed. Tissue changes were evaluated using superimposed standard tessellation language (STL) files. RESULTS: Wound dehiscence was found in more than half of the test groups, but secondary wound healing was successfully achieved in all groups. Histomorphometrically, tissue thickness was favored in group SCTG at or above the implant platform level (IP), and group SCTG and the groups with VCMX presented similar tissue thickness below the IP. However, the differences in such thickness among the groups were minor. The keratinized tissue height was greater in group VCMX/PDRN than in groups SCTG and VCMX. Superimposing the STL files revealed a decrease in soft-tissue volume in all groups. CONCLUSIONS: Wound dehiscence after soft-tissue volume augmentation might be detrimental to obtaining the expected outcomes. PDRN appears not to have a positive effect on the soft-tissue volume gain.

Investigation of periodontitis, halitosis, xerostomia, and serological characteristics of patients with osteoarthritis and rheumatoid arthritis and identification of new biomarkers.

Rheumatoid arthritis (RA) and osteoarthritis (OA) are two different types of arthritis. Within RA, the subsets between seronegative RA (snRA) and seropositive RA (spRA) represent distinct disease entities; however, identifying clear distinguishing markers between them remains a challenge. This study investigated and compared the oral health conditions in patients with RA and OA to clarify the differences from healthy controls. In addition, we investigated the serological characteristics of the patients, the factors that distinguished patients with RA from those with OA, and the main factors that differentiated between snRA and spRA patients. A total of 161 participants (mean age: 52.52 ± 14.57 years, 32 males and 129 females) were enrolled in this study and categorized as: normal (n = 33), OA (n = 31), and RA (n = 97). Patients with RA were divided into the following two subtypes: snRA (n = 18) and spRA (n = 79). Demographics, oral health, and serological characteristics of these patients were compared. The prevalence of periodontal diseases was significantly higher in patients with OA (100%) and RA (92.8%) than in healthy controls (0.0%). However, the presence of periodontal diseases was not utilized as a distinguishing factor between OA and RA. Xerostomia occurred more frequently in patients with RA (84.5%) than in patients with OA (3.2%) and healthy controls (0.0%) (all p < 0.001). ROC analysis revealed that periodontal disease was a very strong predictor in the diagnosis of OA compared to healthy controls, with an AUC value of 1.00 (p < 0.001). Additionally, halitosis (AUC = 0.746, 95% CI 0.621-0.871, p < 0.001) and female sex (AUC = 0.663, 95% CI 0.529-0.797, p < 0.05) were also significant predictors of OA. The strongest predictors of RA diagnosis compared to healthy controls were periodontal diseases (AUC = 0.964), followed by xerostomia (AUC = 0.923), age (AUC = 0.923), female sex (AUC = 0.660), and halitosis (AUC = 0.615) (all p < 0.05). Significant serological predictors of RA were anti-CCP Ab (AUC = 0.808), and RF (AUC = 0.746) (all p < 0.05). In multiple logistic regression analysis, xerostomia (odds ratio, OR: 8124.88, 95% CI 10.37-6368261.97, p-value = 0.008) and Anti-CCP Ab (OR: 671.33, 95% CI 2.18-207,074.02, p = 0.026) were significant predictors for RA compared to OA. When diagnosing spRA compared to snRA, anti-CCP Ab (AUC = 1.000, p < 0.001) and RF (AUC = 0.910, 95%CI 0.854-0.967, p < 0.001) had outstanding predictive performances. Therefore, clinicians and researchers should thoroughly evaluate the oral status of both OA and RA patients, alongside serological factors, and consider these elements as potential predictors.

Anatomical structures in the maxillary sinus related to lateral sinus elevation: a cone beam computed tomographic analysis.

OBJECTIVES: The objective of this study is to evaluate the anatomical structures in the maxillary sinus with relation to lateral approach sinus elevation utilizing cone beam computed tomography (CT) scans taken prior to sinus elevation surgery. MATERIALS AND METHODS: A total of 150 CT images were acquired from 150 patients (90 men and 60 women; mean age, 49.4 years, range 23-86 years) who were being treated with implant-supported restorations in the posterior edentulous maxilla. Of the 150 CT scans, 65 were of the right sinus and 85 of the left sinus. Measurements of the anatomical structures in the maxillary sinus were conducted on the CT images. RESULTS: In the mean width of the lateral wall, there were statistically significant values among the measurement points (P < 0.05). The anterior area of the sinus lateral wall was thicker than the posterior lateral wall. There was a statistically significant difference between the vessel diameter and lateral wall width (P < 0.05). As sinus lateral wall width increased, so did the vessel diameter. The mean distance to the inferior border of the vessel from the sinus floor and from the alveolar crest was 8.25 and 17.03 mm, respectively. The intraosseous group among the vessel position was 64.3%, so the intraosseous vessel could be visualized in CT scans at 64.3%. In angle A, the group of less than 30° was 4.8%. Schneiderian membrane perforation by narrow angle had a low risk. The prevalence of the septa related to Schneiderian membrane perforation was 44%. The distance to the inferior border of the vessel from the alveolar crest being less than 15 mm was 31%. The vessel diameter greater than 1 mm was 37.8%. CONCLUSIONS: Based on present research about utilizing cone beam CT scans for sinus elevation, the alteration of the lateral approach sinus elevation technique is highly recommended if complications such as membrane perforation or bleeding are expected.

The effect of Er:YAG laser irradiation on hydroxyapatite-coated implants and fluoride-modified TiO2-blasted implant surfaces: a microstructural analysis.

The purpose of this study was to evaluate the microscopic changes and surface roughness on hydroxyapatite (HA)-coated implants following exposure to different powers and durations of Er:YAG laser irradiation in order to determine the proper pulse energy level and irradiation time. Ten HA-coated implants and ten fluoride-modified TiO2 implants were used. The implants were divided into a control (one implant) and test group (nine implants) for each implant type. Implants in the test groups were sub-divided into three groups (three implants per group) based on the applied laser pulse energy and irradiation time. The measurement of surface roughness was performed on all implants in the test groups using a white light interferometer before and after laser irradiation. R a values were recorded and compared in order to evaluate changes in surface roughness. For HA-coated implants, the R a values increased in all test groups after laser irradiation. However, mean R a values in the fluoride-modified TiO2-blasted implant test group were decreased after irradiation. There was no statistical difference. Scanning electron microscope analysis revealed surface alterations in both the HA-coated and fluoridated TiO2-blasted implants irradiated for 1.5 min at 100 mJ/pulse, 10 Hz. When the pulse energy and irradiation time increased, greater surface alterations, including surface flattening and microfractures, were observed. In conclusion, the results of the current study suggest that no changes could be observed in both HA-coated implants and fluoride-modified TiO2-blasted implants after irradiation at an intensity of 100 mJ/pulse, 10 Hz for 1 min performed to achieve surface detoxification.

Investigation of volatile sulfur compound level and halitosis in patients with gingivitis and periodontitis.

This study aimed to measure the levels of volatile sulfur compounds and investigate the occurrence of halitosis in patients with gingivitis and periodontitis. Additionally, the incidence rates of gingivitis and periodontitis in patients with halitosis were investigated. Through various statistical analyses, we attempted to determine the relationship between periodontal disease and halitosis. One-hundred-and-four participants (52 females and 52 males, mean age: 46.49 ± 16.03 years) were enrolled in this cross-sectional study, comprising 33 healthy controls, 43 patients with gingivitis, and 28 patients with periodontitis. Gas chromatography was used to measure hydrogen sulfide (H2S) and methyl mercaptan (CH3SH), which are representative VSCs. The VSC cut-off values for diagnosing halitosis were 65.79 ppb for women and 79.94 ppb for men. Total VSC level was significantly higher in the gingivitis than the healthy control group (186.72 ± 374.83 ppb vs. 19.80 ± 40.19 ppb, p = 0.035). There was no significant difference between the gingivitis and periodontitis (153.79 ± 278.51 ppb) groups. H2S level was significantly higher in the gingivitis (100.51 ± 183.69 ppb) and periodontitis (91.57 ± 132.06 ppb) groups than in healthy controls (14.97 ± 31.22 ppb), and CH3SH level was significantly higher in gingivitis group (29.31 ± 59.16 ppb) than in the healthy control (5.73 ± 14.10 ppb) (all p < 0.05). Halitosis was found in 3% of healthy controls and 39.5% and 42.9% of patients with gingivitis and periodontitis patients, respectively, making it significantly higher in the gingivitis and periodontitis groups than the healthy controls (p = 0.005). Conversely, among participants with halitosis, 53.1% had gingivitis, 37.5% had periodontitis, and 90.6 incidence had periodontal disease. Multivariate logistic regression analysis to predict the presence of halitosis, found periodontal disease was a significant predictor of halitosis (OR = 3.607, 95% CI 1.023-12.718, p = 0.046). Considering area under curve value for halitosis, the cut-off value of healthy control (H2S:61.5 ppb, CH3SH:3.5 ppb), gingivitis (H2S:50.0 ppb, CH3SH:6 ppb), and periodontitis (H2S:62.0 ppb, CH3SH:3.5 ppb) were (all p < 0.05). Our results emphasize the close and strong relationship between periodontal disease and halitosis through human clinical evidence based on the high co-occurrence rate of mutual diseases. Additionally, the presence of periodontal disease increased the probability of halitosis by 3.607 times. These results suggest that H2S can be used as a biomarker of halitosis in patients with periodontal disease.

Salivary cortisol, dehydroepiandrosterone, and chromogranin A levels in patients with gingivitis and periodontitis and a novel biomarker for psychological stress.

Introduction: This study aimed to investigate the neuroendocrine responses based on cortisol, dehydroepiandrosterone (DHEA), cortisol/DHEA ratio, and chromogranin A levels, which reflect the activity of the hypothalamic-pituitary-adrenal axis, according to the presence or absence of psychological stress in patients with gingivitis and periodontitis compared to that in healthy controls. Methods: In total, 117 patients (60 women, mean age: 36.29 ± 19.03 years) participated in this case-control study, comprising 32 healthy controls, 49 patients with gingivitis, and 36 patients with periodontitis. We investigated the presence of psychological stress and salivary characteristics, and analyzed the stress-related biomarkers of cortisol, DHEA, cortisol/DHEA ratio, and chromogranin A in the stimulated saliva. Results: Salivary cortisol and chromogranin A levels increased with the severity of periodontal disease; their levels were the highest in the periodontitis group and were significantly higher in the following descending order: periodontitis, gingivitis, and healthy control groups (all values of p < 0.001). Additionally, the DHEA levels and cortisol/DHEA ratio were higher in the periodontitis group than those in the healthy control group (all values of p < 0.001). A multivariate logistic regression analysis revealed that the factors predicting above-average cortisol levels were periodontitis (odds ratio [OR] = 256.829; p < 0.001), women (OR = 6.365; p = 0.004), and psychological stress (OR = 6.036; p = 0.007); those predicting above-average cortisol/DHEA ratios were periodontitis (OR = 11.436; p < 0.001), psychological stress (OR = 3.977; p = 0.003), and women (OR = 2.890; p = 0.026). Thus, periodontitis and psychological stress were significant and strong predictors of above-average cortisol levels and cortisol/DHEA ratios. In the gingivitis group, salivary cortisol levels (r = 0.381, p = 0.007) and cortisol/DHEA ratios (r = 0.479, p < 0.001) were correlated with the presence of psychological stress. In the periodontitis group, increased cortisol/DHEA ratios (r = 0.412, p = 0.013) and lowered salivary buffer capacities (r = -0.334, p = 0.047) were correlated with the presence of psychological stress. Conclusion: Periodontitis is a multifactorial disease resulting in inflammatory tissue destruction, which differs from gingivitis and a healthy state. Differences in stress-related neuroendocrine markers were revealed based on the severity of periodontal disease. The biomarkers that could be classified according to disease severity were salivary cortisol and chromogranin A levels. Above-average cortisol levels and cortisol/DHEA ratios are significant predictors of psychological stress in patients with gingivitis and periodontitis.

Retrospective analysis of keratinized tissue augmentation using a xenogeneic collagen matrix for resolving peri-implant mucositis and peri-implantitis.

PURPOSE: The significance of keratinized tissue for peri-implant health has been emphasized. However, there is an absence of clinical evidence for the use of a xenogeneic collagen matrix (XCM) to manage peri-implant mucositis and peri-implantitis. Therefore, the purpose of this study was to investigate outcomes after keratinized tissue augmentation using an XCM for the management of peri-implant diseases. METHODS: Twelve implants (5 with peri-implant mucositis and 7 with peri-implantitis) in 10 patients were included in this study. Non-surgical treatments were first performed, but inflammation persisted in all implant sites. The implant sites all showed a lack of keratinized mucosa (KM) and vestibular depth (VD). Apically positioned flaps with XCM application were performed. Bone augmentation was simultaneously performed on peri-implantitis sites with an intrabony defect (>3 mm). The following clinical parameters were measured: the probing pocket depth (PPD), modified sulcular bleeding index (mSBI), suppuration (SUP), keratinized mucosal height (KMH), and VD. RESULTS: There were no adverse healing events during the follow-up visits (18±4.6 months). The final KMHs and VDs were 4.34±0.86 mm and 8.0±4.05 mm, respectively, for the sites with peri-implant mucositis and 3.29±0.86 mm and 6.5±1.91 mm, respectively, for the sites with peri-implantitis. Additionally, the PPD and mSBI significantly decreased, and none of the implants presented with SUP. CONCLUSIONS: Keratinized tissue augmentation using an XCM for sites with peri-implant mucositis and peri-implantitis was effective for increasing the KMH and VD and decreasing peri-implant inflammation.

Soft tissue outcomes following alveolar ridge preservation with/without primary flap closure for periodontally damaged extraction socket: A randomized clinical trial.

INTRODUCTION: The changes in soft tissue profile following alveolar ridge preservation (ARP) with/without primary flap closure (PC) in periodontally damaged sockets have yet to be discovered. METHODS: For periodontally damaged non-molar extraction sockets, ARP with PC (group PC)/without PC (group SC) was performed using granule-type xenogeneic bone substitute material and a collagen barrier. Intraoral scans were performed at the time of ARP and 4 months thereafter. Superimposition of STL files was performed to examine tissue change on the soft tissue level. The level of mucogingival junction (MGJ) was also evaluated. RESULTS: A total of 28 patient (13 in group PC, 15 in group SC) completed the study. Soft tissue profile change was evaluated only when the measurement level was located on the non-mobile tissue. Group PC tended to shrink less on the long axis of the extraction socket than group SC (-4.3 ± 3.1 mm vs. -5.9 ± 4.4 mm at the 1 mm below the pre-extraction gingival margin, p > 0.05). Profilometric analysis (on the region of interest) also have a tendency of less tissue profile change in group PC than group SC (-1.0 ± 0.8 mm vs. -1.3 ± 0.5 mm, p > 0.05). The MGJ level change was not statistically significantly different between the groups (p > 0.05) even though the MGJ level was located more apically at 4 months in group SC compared with group PC. CONCLUSIONS: Alveolar ridge preservation with PC tended to yield less soft tissue shrinkage than ARP without PC.

Primary flap closure in alveolar ridge preservation for periodontally damaged extraction socket: A randomized clinical trial.

INTRODUCTION: The effect of primary wound closure (PC) on alveolar ridge preservation (ARP) in periodontally damaged sockets has yet to be fully discovered. METHODS: Periodontally damaged sockets were allocated to one of the following groups: (1) ARP with PC (group PC), and (2) ARP without PC (group secondary wound closure [SC]). Following tooth extraction and flap elevation, granule-type xenogeneic bone substitute material and a collagen barrier were applied. Ridge change was evaluated using cone-beam computed tomographic (CBCT) scans immediately after ARP and at 4 months. Core biopsy specimens were examined histomorphometrically. RESULTS: A total of 28 patients were included in the analysis (13 in group PC, 15 in group SC). Histomorphometrically, the percentage of newly formed bone was 26.2 ± 17.7% and 24.6 ± 18.4% in groups PC and SC, respectively (independent t-test, degree of freedom [df] = 25, p > 0.05). Horizontal ridge changes on CBCT were -4.9 ± 3.1 mm and - 4.2 ± 2.5 mm in groups PC and SC at the 1 mm level below the ridge crest, respectively (independent t-test, df = 26, p > 0.05). Approximately half of the sites required additional bone augmentation at implant placement. CONCLUSIONS: ARP with/without PC yielded similar new bone formation and radiographic ridge change. This clinical trial was not registered prior to participant recruitment and randomization (https://cris.nih.go.kr/cris/search/detailSearch.do/19718).

Effect of the size of the bony access window and the collagen barrier over the window in sinus floor elevation: a preclinical investigation in a rabbit sinus model.

PURPOSE: The aim of this study was to investigate the effect of (1) the size of the bony access window and (2) collagen membrane coverage over the window in sinus floor elevation in a rabbit sinus model. METHODS: Small bony access windows (SW; ø 2.8 mm) were made in 6 rabbits and large windows (LW; ø 6 mm) in 6 other rabbits. Both sinuses in each rabbit were allocated to groups with or without coverage of a collagen membrane (CM) on the window, resulting in 4 groups: SW, LW, SW+CM, and LW+CM. After 4 weeks of healing, micro-computed tomographic, histologic, and histomorphometric analyses were performed. RESULTS: Bony healing in the window area was incomplete in all groups, but most bone graft particles were well confined in the augmented cavity. Histologically, the pattern of new bone formation was similar in all groups. Histomorphometrically, the percentage of newly formed bone was greater in the groups with CM than in the groups without CM, and in the groups with SW than in the groups with LW (12.92%±6.40% in the SW+CM group, 4.21%±7.73% in the SW group, 10.45%±4.81% in the LW+CM group, 11.77%±3.83% in the LW group). The above differences were not statistically significant (P>0.05). CONCLUSIONS: The combination of a small bony access window and the use of a collagen membrane over the window favored new bone formation compared to other groups, but this result should be further investigated due to the limitations of the present animal model.

The effects of bone grafting material and a collagen membrane in the ridge splitting technique: an experimental study in dogs.

OBJECTIVES: This study was designed to evaluate the effect of bone graft materials and collagen membranes in ridge splitting procedures with immediate implant placement using a dog model. MATERIALS AND METHODS: Mandibular premolars were extracted in five beagle dogs. After 3 months, ridge splitting and placement of three OsseoSpeed implants were performed bilaterally. The gaps between the implants were allocated according to the following eight treatment modalities; Group 1(no graft), Group 2 (autogenous bone), Group 3 (Bio-Oss Collagen), Group 4 (Bio-Oss), Group 5 (no graft+BioGide), Group 6 (autogenous bone+BioGide), Group 7 (Bio-Oss Collagen+BioGide), and Group 8 (Bio-Oss +BioGide). The dogs were sacrificed after 8 or 12 weeks and the specimens were analyzed histologically and histometrically. RESULTS: The gaps between the implants were filled with the newly formed bone, irrespective of which of the eight grafting techniques was used. Group 1 revealed a significantly lower percentage of bone-to-implant contact (BIC) than Group 5 at 8 and 12 weeks (P<0.05). Group 1 showed the most prominent marginal bone loss (MBL) at 12 weeks (P<0.05). Regarding the use of membranes, Groups 1 and 2 showed significantly more MBL than Groups 5 and 6 at 12 weeks (P<0.05). CONCLUSIONS: After ridge splitting, if the gaps between implants were grafted or covered with collagen membranes, a higher percentage of BIC was obtained. Based on our results, we suggest that the use of bone graft materials and/or collagen membranes is better for the prevention of MBL after ridge splitting procedures.

The effect of Er:YAG laser irradiation on the scanning electron microscopic structure and surface roughness of various implant surfaces: an in vitro study.

The purpose of this study was to evaluate the surface roughness (R(a)) and microscopic change to irradiated dental implant surfaces in vitro and ultimately to determine the proper pulse energy power and application time for the clinical use of Er:YAG lasers. Anodic oxidized surface implants and sand-blasted, large-grit, and acid-etched (SLA) surface implants were used. Each experimental group of implant surfaces included ten implants. Nine implants were used for the laser irradiation test groups and one for the control group. Each test group was equally divided into three subgroups by irradiated pulse energy power. Using an Er:YAG laser, each subgroup of anodic oxidized surface implants was split into 60-, 100-, and 140-mJ/pulse groups, with each subgroup of SLA surface implants irradiated with a 100-, 140-, or 180-mJ/pulse. Three implants in every test subgroup were respectively irradiated for 1, 1.5, and 2 min. The R(a) values for each specimen were recorded and every specimen was observed by SEM. Irradiation by Er:YAG laser led to a decrease in implant surface roughness that was not statistically significant. In anodic oxidized surfaces, the oxidized layer peeled off of the surface, and cracks appeared on implant surfaces in the 100- and 140-mJ/pulse subgroups. However, with SLA surfaces, no significant change in surface texture could be found on any implant surface in the 100- and 140-mJ/pulse subgroups. The melting and fusion phenomena of implant surfaces were observed with all application times with 180 mJ/pulse irradiation. The SLA implant surfaces are stable with laser intensities of less than 140 mJ/pulse and an irradiation time of less than 2 min. The anodic oxidized surfaces were not stable with laser intensities of 100 mJ/pulse when an Er:YAG laser was used to detoxify implant surfaces.