Enzymatic mineralization generates ultrastiff and tough hydrogels with tunable mechanics.

The cartilage and skin of animals, which are made up of more than fifty per cent water, are rather stiff (having elastic moduli of up to 100 megapascals) as well as tough and hard to break (with fracture energies of up to 9,000 joules per square metre). Such features make these biological materials mechanically superior to existing synthetic hydrogels. Lately, progress has been made in synthesizing tough hydrogels, with double-network hydrogels achieving the toughness of skin and inorganic-organic composites showing even better performance. However, these materials owe their toughness to high stretchability; in terms of stiffness, synthetic hydrogels cannot compete with their natural counterparts, with the best examples having elastic moduli of just 10 megapascals or less. Previously, we described the enzyme-induced precipitation and crystallization of hydrogels containing calcium carbonate, but the resulting materials were brittle. Here we report the enzyme-induced formation of amorphous calcium phosphate nanostructures that are homogenously distributed within polymer hydrogels. Our best materials have fracture energies of 1,300 joules per square metre even in their fully water-swollen state-a value superior to that of most known water-swollen synthetic materials. We are also able to modulate their stiffness up to 440 megapascals, well beyond that of cartilage and skin. Furthermore, the highly filled composite materials can be designed to be optically transparent and to retain most of their stretchability even when notched. We show that percolation drives the mechanical properties, particularly the high stiffness, of our uniformly mineralized hydrogels.

Conjugates of Ciprofloxacin and Amphiphilic Block Copoly(2-alkyl-2-oxazolines)s Overcome Efflux Pumps and Are Active against CIP-Resistant Bacteria.

Conjugation of antibiotics with polymers is an emerging strategy to improve the performance of these important drugs. Here, the antibiotic ciprofloxacin (CIP) was conjugated with amphiphilic poly(2-oxazoline) (POx) block copolymers to investigate whether the activity of the antibiotic was enhanced due to additionally induced membrane activity. The resulting polymer-antibiotic conjugates (PACs) are an order of magnitude more active against the bacterial strain Staphylococcus aureus than CIP and show high activities against numerous pathogenic bacterial strains. Their high activity depends on an optimal hydrophobic/hydrophilic balance (HHB) of the POx tail. Mechanistic studies revealed that the derivatization of CIP required for the polymer conjugation lowers the affinity of the antibiotic to its target topoisomerase IV. However, the amphiphilic PACs are most likely concentrated within the bacterial cytoplasm, which overcompensates the loss of affinity and results in high antibacterial activity. In addition, the development of resistance in S. aureus and Escherichia coli is slowed down. More importantly, the amphiphilic PACs are active against CIP-resistant S. aureus and E. coli. The PACs with the highest activity are not cytotoxic toward human stem cells and do not lyse blood cells in saturated solution.

Poly(2-oxazoline)s with a 2,2'-Iminodiacetate End Group Inhibit and Stabilize Laccase.

Poly(2-oxazoline)s (POxs) with 2,2'-iminodiacetate (IDA) end groups were investigated as inhibitors for laccase. The polymers with the IDA end groups are reversible, competitive inhibitors for this enzyme. The IC50 values were found to be in a range of 1-3 mm. Compared with IDA alone, the activity was increased by a factor of more than 30; thus indicating that attaching a polymer chain to an inhibitor can already improve the activity of the former. The enzyme activity drops to practically zero upon increasing the concentration of the most active telechelic inhibitor, IDA-PEtOx30 -IDA (PEtOx: poly(2-ethyl-2-oxazoline)), from 5 to 8 mm. This unusual behavior was investigated by means of dynamic light scattering, which showed specific aggregation above 5 mm. Furthermore, the laccase could be stabilized in the presence of POx-IDA, upon addition at a concentration of 20 mm and higher. Whereas laccase becomes completely inactive at room temperature after one week, the stabilized laccase is fully active for at least a month in aqueous solution.

Full Thermal Switching of Enzymes by Thermoresponsive Poly(2-oxazoline)-Based Enzyme Inhibitors.

Controlling the activity of enzymes is an important feature for many processes in medicine, bioanalytics, and biotechnology. So far, it has not been possible to fully switch biocatalysts on and off by thermoresponsive enzyme inhibitors. Herein, we present poly(2-oxazoline)s with iminodiacetic acid end groups (POx-IDA) that are lower critical solution temperature (LCST) polymers and thus thermosensitive. They are capable of reversibly inhibiting the activity of horse radish peroxidase and laccase by more than 99 %. Increasing the temperature makes the POx-IDA precipitate, which leads to 100 % recovery of the enzyme activity. This switching cycle is fully reversible. The LCST of the POx-IDA can be tuned by varying the polymer composition to generate a wide range of switching windows.

Poly(2-oxazoline)s terminated with 2,2'-imino diacetic acid form noncovalent polymer-enzyme conjugates that are highly active in organic solvents.

A great limitation for the usability of free enzymes in organic solvents is their insolubility in these media. Some surfactants are capable of solubilizing enzymes in such media, but they are hard to remove. Covalent modification of enzymes with polymers has led to polymer-enzyme conjugates (PECs) that are soluble in organic solvents, but the process is quite elaborate. Poly(2-oxazoline)s (POx) with the end group 2,2'-imino diacetic acid were shown to form reversible, nano-sized noncovalent aggregates with enzymes. These PECs give clear solutions in organic solvents. The enzymes lysozyme, horseradish peroxidase (HRP), laccase, α-chymotrypsin (CT), catalase, and alcohol dehydrogenase could be solubilized in chloroform and toluene at concentrations of up to 2 mg protein/ml. Laccase, HRP, and CT were shown to survive the transfer into the organic medium and back to water in their active form. The distribution coefficient of the proteins between water and the organic solvent was shown to be dependent on the nature of the POx backbone. All three biocatalysts exhibit greatly enhanced activity in the respective organic solvent.

Insights into the Kinetics of the Resistance Formation of Bacteria against Ciprofloxacin Poly(2-methyl-2-oxazoline) Conjugates.

The influence on the resistance formation of polymers attached to antibiotics has rarely been investigated. In this study, ciprofloxacin (CIP) was conjugated to poly(2-methyl-2-oxazoline)s with an ethylene diamine end group (Me-PMOx28-EDA) via two different spacers (CIP modified with α,α'-dichloro- p-xylene-xCIP, CIP modified with chloroacetyl chloride-eCIP). The antibacterial activity of the conjugates against a number of bacterial strains shows a great dependence on the nature of the spacer. The Me-PMOx39-EDA-eCIP, containing a potentially cleavable linker, does not exhibit a molecular weight dependence on antibacterial activity in contrast to Me-PMOx27-EDA-xCIP. The resistance formation of both conjugates against Staphylococcus aureus and Escherichia coli was investigated. Both conjugates showed the potential to significantly delay the formation of resistant bacteria compared to the unmodified CIP. Closer inspection of a possible resistance mechanism by genome sequencing of the topoisomerase IV region of resistant S. aureus revealed that this bacterium mutates at the same position when building up resistance to CIP and to Me-PMOx27-EDA-xCIP. However, the S. aureus cells that became resistant against the polymer conjugate are fully susceptible to CIP. Thus, conjugation of CIP with PMOx seems to alter the resistance mechanism.

Multicore Artificial Metalloenzymes Derived from Acylated Proteins as Catalysts for the Enantioselective Dihydroxylation and Epoxidation of Styrene Derivatives.

Artificial metalloenzymes (AME's) are an interesting class of selective catalysts, where the chiral environment of proteins is used as chiral ligand for a catalytic metal. Commonly, the active site of an enzyme is modified with a catalytically active metal. Here we present an approach, where the commercial proteins lysozyme (LYS) and bovine serum albumin (BSA) can be converted into highly active and enantioselective AME's. This is achieved by acylation of the proteins primary amino groups, which affords the metal salts in the core of the protein. A series of differently acylated LYS and BSA were reacted with K2 OsO2 (OH)4 , RuCl3 , and Ti(OMe)4 , respectively, and the conjugates were tested for their catalytic activity in dihydroxylation and epoxidation of styrene and its derivatives. The best suited system for dihydroxylation is fully acetylated LYS conjugated with K2 OsO2 (OH)4 , which converts styrene to 1,2-phenylethanediol with an enantioselectivity of 95 % ee (S). BSA fully acylated with hexanoic acid and conjugated with three moles RuCl3 per mole protein shows the highest ee values for the conversion of styrene to the respective epoxide with enenatioselectivities of over 80 % ee (R), a TON of more than 2500 and a yield of up to 78 % within 24 h at 40 °C. LYS has two favored selective binding sites for the metal catalyst and BSA has even three. The AME's with titanate in the active center invert the enantioselectivity of styrene epoxidation.

Entropically driven Polymeric Enzyme Inhibitors by End-Group directed Conjugation.

A new generic concept for polymeric enzyme inhibitors is presented using the example of poly(2-methyl-2-oxazoline) (PMOx) terminated with an iminodiacetate (IDA) function. These polymers are shown to be non-competitive inhibitors for horseradish peroxidase (HRP). Mechanistic investigations revealed that the polymer is directed to the protein by its end group and collapses at the surface in an entropy-driven process as shown by isothermal titration calorimetry. The dissociation constant of the complex was determined as the inhibition constant Ki using HRP kinetic activity measurements. Additional experiments suggest that the polymer does not form a diffusion layer around the protein, but might inhibit by inducing minor conformational changes in the protein. This kind of inhibitor offers new avenues towards designing bioactive compounds.

Crosslinking of Semiaromatic Polyesters toward High-Temperature Shape Memory Polymers with Full Recovery.

In this work, high-temperature shape memory polymers are realized by end-group crosslinking of the semiaromatic polyesters polyethylene terephthalate as well as polybutylene terephthalate. Both networks exhibit trigger temperatures distinctly higher than 200 °C and excellent shape memory properties such as storable strains of 200%, full fixity of the applied strain in the temporary shape, and full recovery of the permanent shape.

Poly(2-oxazoline)-Antibiotic Conjugates with Penicillins.

The conjugation of antibiotics with polymers is rarely done, but it might be a promising alternative to low-molecular-weight derivatization. The two penicillins penicillin G (PenG) and penicillin V (PenV) were attached to the end groups of different water-soluble poly(2-oxazoline)s (POx) via their carboxylic acid function. This ester group was shown to be more stable against hydrolysis than the ß-lactam ring of the penicillins. The conjugates are still antimicrobially active and up to 20 times more stable against penicillinase catalyzed hydrolysis. The antibiotic activity of the conjugates against Staphylococcus aureus in the presence of penicillinase is up to 350 times higher compared with the free antibiotics. Conjugates with a second antimicrobial function, a dodecyltrimethylammonium group (DDA-X), at the starting end of the PenG and PenV POx conjugates are more antimicrobially active than the conjugates without DDA-X and show high activity in the presence of penicillinase. For example, the conjugates DDA-X-PEtOx-PenG and DDA-X-PEtOx-PenV are 200 to 350 times more active against S. aureus in the presence of penicillinase and almost as effective as the penicillinase stable cloxacollin (Clox) under these conditions. These conjugates show even greater activity compared to cloxacollin without this enzyme present. Further, both conjugates kill Escherichia coli more effectively than PenG and Clox.

Poly(2-ethyloxazoline) as matrix for highly active electrospun enzymes in organic solvents.

Nanofibers are advantageous carriers for biocatalysts, because they show lower diffusion limitations due to their high surface/volume ratio. Only a few samples are known where enzymes are directly spun into nanofibers, mostly because there are not many suited polymer carriers. In this study, poly(2-ethyloxazoline) (PEtOx) was explored regarding its usefulness to activate various enzymes in organic solvents by directly electrospinning them from aqueous solutions containing the polymer. It was found that the concentration of PEtOx in the spinning solution and also the swellability of the fibers play a great role in the activity of the enzymes in organic solvents. Using electrospun lipase B from Candida antarctica (CaLB) under optimized conditions revealed a higher carrier activity than the commercial Novozyme 435 with 10 times less immobilized protein. The electrospinning of PEtOx/CaLB fibers onto a stirrer is used to realize a biocatalytic stirrer for organic solvents. Biotechnol. Bioeng. 2017;114: 39-45. © 2016 Wiley Periodicals, Inc.

Polymer enzyme conjugates as chiral ligands for sharpless dihydroxylation of alkenes in organic solvents.

Conjugates of enzymes and poly(2-methyloxazoline) were used as organosoluble amphiphilic polymer nanocontainers for dissolving osmate, thereby converting the enzymes into organosoluble artificial metalloenzymes. These were shown to catalyze the dihydroxylation of different alkenes with high enantioselectivity. The highest selectivities, found for osmate complexed with laccase polymer-enzyme conjugates (PECs), even exceed those of classical Sharpless catalysts.

Conjugation of Ciprofloxacin with Poly(2-oxazoline)s and Polyethylene Glycol via End Groups.

The antibiotic ciprofloxacin (CIP) was covalently attached to the chain end of poly(2-methyloxazoline) (PMOx), poly(2-ethyloxazoline) (PEtOx), and polyethylene glycol (PEG), and the antimicrobial activity of these conjugates was tested for Staphylococcus aureus, Streptococcus mutans, Escherichia coli, Pseudomonas aeruginosa, and Kleisella pneumoniae. Chemical structures of the conjugates were proven by (1)H NMR and electron spray ionization mass spectrometry. The direct coupling of PMOx and CIP resulted in low antimicrobial activity. The coupling via a spacer afforded molecular weight dependent activity with a molar minimal inhibitory concentration that is even higher than that of the pristine CIP. The antimicrobial activity of the conjugates increases in the order of PMOx < PEtOx < PEG. Conjugation of CIP and a quaternary ammonium compound via PMOx did not result in higher activity, indicating no satellite group or synergistic effect of the different biocidal end groups.

Chemical cross-linking of polypropylenes towards new shape memory polymers.

In this work, syndiotactic polypropylene (sPP) as well as isotactic polypropylene (iPP) are cross-linked to gain a shape memory effect. Both prepared PP networks exhibit maximum strains of 700%, stored strains of up to 680%, and recoveries of nearly 100%. While x-iPP is stable for many cycles, x-sPP ruptures after the first shape-memory cycle. It is shown by wide-angle X-ray scattering (WAXS) experiments that cross-linked iPP exhibits homoepitaxy in the temporary, stretched shape but in contrast to previous reports it contains a higher amount of daughter than mother crystals.

Post-polymerization of urease-induced calcified, polymer hydrogels.

Urease-induced calcification is an innovative method to artificially produce highly filled CaCO3-based composite materials by intrinsic mineralization of hydrogels. The mechanical properties of these hybrid materials based on poly(2-hydroxyethylacrylate) cross-linked by triethylene glycol dimethacrylate are poor. Increasing the degree of calcification to up to 94 wt% improves the Young's moduli (YM) of the materials from some 40 MPa to more than 300 MPa. The introduction of calcium carbonate affine groups to the hydrogel matrix by copolymerizing acrylic acid and [2-(methacryloyloxy) ethyl]trimethylammonium chloride, respectively, does not increase the stiffness of the composites. A Young's modulus of more than 1 GPa is achieved by post-polymerization (PP) of the calcified hydrogels, which proves that the size of the contact area between the matrix and calcium carbonate crystals is the most crucial parameter for controlling the stiffness of hybrid materials. Switching from low Tg to high Tg hydrogel matrices (based on poly(N,N-dimethyl acrylamide)) results in a YM of up to 3.5 GPa after PP.

Shape-Memory PVDF Exhibiting Switchable Piezoelectricity.

In this study, a material is designed which combines the properties of shape-memory and electroactive polymers. This is achieved by covalent cross-linking of polyvinylidene fluoride. The resulting polymer network exhibits excellent shape-memory properties with a storable strain of 200%, and fixity as well as recovery values of 100%. Programming upon rolling induces the transformation from the nonelectroactive α-phase to the piezoelectric ß-phase. The highest ß-phase content is found to be 83% for a programming strain of 200% affording a d33 value of -30 pm V(-1). This is in good accordance with literature known values for piezoelectric properties. Thermal triggering this material does not only result in a shape change but also renders the material nonelectroactive.

Impact of the configuration of a chiral, activating carrier on the enantioselectivity of entrapped lipase from Candida rugosa in cyclohexane.

Lipase from Candida rugosa was loaded into an amphiphilic polymer co-network (APCN) composed of the chiral poly[(R)-N-(1-hydroxybutan-2-yl) acrylamide] [P-(R)-HBA] and P-(S)-HBA, respectively, linked by poly(dimethylsiloxane). The nanophase-separated amphiphilic morphology affords a 38,000-fold activation of the enzyme in the esterification of 1-phenylethanol with vinyl acetate. Further, the enantioselectivity of the entrapped lipase was influenced by the configuration of the chiral, hydrophilic polymer matrix. While the APCN with the (S)-configuration of the APCN affords 5.4 faster conversion of the (R)-phenylethanol compared to the respective (S)-enantiomer, the (R)-APCN allows an only a 2.8 faster conversion of the (R)-enantiomer of the alcohol. Permeation-experiments reveal that the enantioselectivity of the reaction is at least partially caused by specific interactions between the substrates and the APCN.

Antimicrobial poly(2-methyloxazoline)s with bioswitchable activity through satellite group modification.

Biocides are widely used for preventing the spread of microbial infections and fouling of materials. Since their use can build up microbial resistance and cause unpredictable long-term environmental problems, new biocidal agents are required. In this study, we demonstrate a concept in which an antimicrobial polymer is deactivated by the cleavage of a single group. Following the satellite group approach, a biocidal quaternary ammonium group was linked through a poly(2-methyloxazoline) to an ester satellite group. The polymer with an octyl-3-propionoate satellite group shows very good antimicrobial activity against Gram-positive bacterial strains. The biocidal polymer was also found to have low hemotoxicity, resulting in a high HC50 /MIC value of 120 for S. aureus. Cleaving the ester satellite group resulted in a 30-fold decrease in antimicrobial activity, proving the concept valid. The satellite group could also be cleaved by lipase showing that the antimicrobial activity of the new biocidal polymers is indeed bioswitchable.

Controlling the function of bioactive worm micelles by enzyme-cleavable non-covalent inter-assembly cross-linking.

Drugs that form self-assembled supramolecular structures to be most-active is a promising way of creating new highly specific and active pharmaceuticals. Controlling the activity of bioactive supramolecular structures such as drug-loaded micelles is possible by both core/shell and inter-assembly cross-linking. However, if the flexibility of the assembly is mandatory for the activity cross-linking is not feasible. Thus, such structures cannot be manipulated in their activity. The present study demonstrates a novel concept to control the activity of not drug-releasing, non-cross-linked bioactive superstructures. This is achieved by formation of nanostructured nanoparticles derived by non-covalent inter-assembly cross-linking of the superstructures. This is shown on the example of amphiphilic diblock-copolymers conjugated with the antibiotic ciprofloxacin (CIP). These polymer-antibiotic conjugates form worm micelles, which greatly activate the conjugated antibiotic without releasing it. Non-covalent inter-assembly cross-linking of these CIP-worm-micelles with amphiphilic triblock copolymers terminated with lipase-cleavable esters leads to nanostructured nanoparticles that resemble cross-linked worm micelles and show an up to 135-fold lower activity than the free worm micelles. The activity of the worm-micelles can be fully recovered by cleaving the end groups of the polymeric cross-linker with lipase.

Investigations on diffusion limitations of biocatalyzed reactions in amphiphilic polymer conetworks in organic solvents.

The use of enzymes as biocatalysts in organic media is an important issue in modern white biotechnology. However, their low activity and stability in those media often limits their full-scale application. Amphiphilic polymer conetworks (APCNs) have been shown to greatly activate entrapped enzymes in organic solvents. Since these nanostructured materials are not porous, the bioactivity of the conetworks is strongly limited by diffusion of substrate and product. The present manuscript describes two different APCNs as nanostructured microparticles, which showed greatly increased activities of entrapped enzymes compared to those of the already activating membranes and larger particles. We demonstrated this on the example of APCN particles based on PHEA-l-PDMS loaded with α-Chymotrypsin, which resulted in an up to 28,000-fold higher activity of the enzyme compared to the enzyme powder. Furthermore, lipase from Rhizomucor miehei entrapped in particles based on PHEA-l-PEtOx was tested in n-heptane, chloroform, and substrate. Specific activities in smaller particles were 10- to 100-fold higher in comparison to the native enzyme. The carrier activity of PHEA-l-PEtOx microparticles was tenfold higher with some 25-50-fold lower enzyme content compared to a commercial product.