ABSTRACT
The recovery of rare earth elements (REEs) including neodymium (Nd) and dysprosium (Dy) from NdFeB permanent magnets has become one of the main ways to solve the increased demand for rare earth. Herein, n-dodecyl phosphate (DPPA) was used for the first time as the adsorption functional group donor, sodium alginate as the substrate, and calcium chloride solution as the reactive solvent, a hybrid hydrogel adsorbent DPPA/CaALG was synthesized by sol-gel method for application in the adsorption and separation of Nd and Dy from the Co-Nd-Dy ternary system. SEM-EDS, and N2 adsorption-desorption analysis showed the successful preparation of DDPA/CaALG with mesoporous structure. Batch experiments showed the superiority of the hybrid hydrogel for the good selective adsorption of Nd and Dy, such as large adsorption capacity (Nd: 162.5 mg/g, Dy: 183.5 mg/g), and no adsorption for Co. FT-IR, XPS showed that PO and P-O groups are involved in the adsorption process of Nd and Dy as electron acceptors, where the ion exchange of P-OH is dominant. Furthermore, the chemical properties of ligands and complexes were analyzed by Density Functional Theory (DFT) calculations and revealed their adsorption behaviors as well as the competition between different metal ions.
Subject(s)
Metals, Rare Earth , Neodymium , Dysprosium , Hydrogels , Adsorption , Alginates , Spectroscopy, Fourier Transform Infrared , PhosphatesABSTRACT
Protection against ionizing radiations is important in laboratories with radioactive materials and high energy cyclotron beams. The Cyclotron and Radioisotope Center (CYRIC) located in Tohoku University in Miyagi prefecture, Japan and is a well-known nuclear science laboratory with cyclotron beams and substantial number of high activity radioactive materials. Considering this, it is important to perform complete radiation transport computations to ensure the safety of non-occupational and occupational workers. In the present work, we have developed a complete 3-dimensional model of the main cyclotron building and radiation labs using Monte Carlo method. We have found that the dispersed photons and neutrons inside and in the surrounding of the CYRIC building pose no significant risk to occupational and non-occupational workers. The present work and the developed models would be useful in the field of radiation protection.
Subject(s)
Cyclotrons , Monte Carlo Method , Radiation Protection , Japan , Occupational Exposure/prevention & control , Occupational Exposure/analysis , Radiation Dosage , Computer Simulation , Humans , UniversitiesABSTRACT
The construction of heterojunction photocatalysts is an auspicious approach for enhancing the photocatalytic performance of wastewater treatment. Here, a novel CeO2 /Bi2 WO6 heterojunction is synthesized using an in situ liquid-phase method. The optimal 15% CeO2 /Bi2 WO6 (CBW-15) is found to have the highest photocatalytic activity, achieving a degradation efficiency of 99.21% for tetracycline (TC), 98.43% for Rhodamine B (RhB), and 94.03% for methylene blue (MB). The TC removal rate remained at 95.38% even after five cycles. Through active species capture experiments, â¢O2 - , h+ , and â¢OH are the main active substances for TC, RhB, and MB, respectively. The possible degradation pathways for TC are analyzed using liquid chromatography-mass spectrometry (LC-MS). The photoinduced charge transfer and possible degradation mechanisms are proposed through experimentation and density functional theory (DFT) calculations. Toxicity assessment experiments show a significant reduction in toxicity during the TC degradation process. This study uncovers the mechanism of photocatalytic degradation in CeO2 /Bi2 WO6 and provides new insights into toxicity assessment.
ABSTRACT
Cobalt carbides are emerging as promising materials for various magnetic and catalytic applications. However, exploring dedicated cobalt carbides with optimal catalytic properties via adjusting phase compositions remains a significant challenge. Herein, three different cobalt carbides, CoxC (Co2C-Co3C), Co2C-Co, and Co3C, were successfully prepared using a facile one-pot green method. The phase compositions of cobalt carbides could be easily controlled by varying the cobalt-based precursors and carbon sources. More remarkably, three different cobalt carbides could serve as reduction cocatalysts decorated CdS for improved hydrogen production under visible light. Intriguingly, the obtained Co3C/CdS nanocomposite displayed the highest photocatalytic hydrogen evolution activity among the three composites and superior photocatalytic stability. This work provides a fundamental approach to tuning the photocatalytic properties of cobalt carbides for energy conversion fields.
ABSTRACT
Effective and efficient disposal of radioactive pollution has been crucial for responding to unexpected nuclear accidents and guaranteeing the sustainable development of nuclear energy. In this study, a kind of porous zirconium phosphate was synthesized with a sol-gel process followed by a post-synthesis modification to remove the radioactive Sr2+ from wastewater. The prepared materials were characterized by different technologies including FT-IR, SEM-EDS, XRD and XPS, and then the adsorption performance was evaluated in batch and column modes. Experimental results suggested that the porous zirconium phosphate adsorbent was successfully prepared with Na+ dispersed in the channels for exchange. It inherited the excellent properties of zirconium dioxide aerogel and exhibited mesoporous structure and large specific surface area. Compared with traditional zirconium phosphate, the adsorption kinetics and the adsorption capacity were improved simultaneously. Especially, it showed excellent selectivity towards Sr2+ among different cations, and even could remove the low-level Sr2+ from natural seawater efficiently, which powerfully demonstrated that the prepared material could be applied in the treatment of practical wastewater. Spectra studies uncovered that the adsorption activities were dominated by the ion exchange mechanism between external Sr2+ and interlaminar Na+ or H+. In conclusion, this paper not only reports a novel synthesis strategy for the acquisition of porous zirconium phosphate, but also presents a promising adsorbent for the Sr2+ removal.
Subject(s)
Wastewater , Water Pollutants, Chemical , Adsorption , Hydrogen-Ion Concentration , Kinetics , Phosphates/chemistry , Porosity , Spectroscopy, Fourier Transform Infrared , Strontium , Water Pollutants, Chemical/chemistry , Zirconium/chemistryABSTRACT
Sulfonic resins are highly efficient cation exchangers widely used for metal removal from aqueous solutions. Herein, a new sulfonation process is designed for the sulfonation of algal/PEI composite (A*PEI, by reaction with 2-propylene-1-sulfonic acid and hydroxylamine-O-sulfonic acid). The new sulfonated functionalized sorbent (SA*PEI) is successfully tested in batch systems for strontium recovery first in synthetic solutions before investigating with multi-component solutions and final validation with seawater samples. The chemical modification of A*PEI triples the sorption capacity for Sr(II) at pH 4 with a removal rate of up to 7% and 58% for A*PEI and SA*PEI, respectively (with SD: 0.67 g L-1). FTIR shows the strong contribution of sulfonate groups for the functionalized sorbent (in addition to amine and carboxylic groups from the support). The sorption is endothermic (increase in sorption with temperature). The sulfonation improves thermal stability and slightly enhances textural properties. This may explain the fast kinetics (which are controlled by the pseudo-first-order rate equation). The sulfonated sorbent shows a remarkable preference for Sr(II) over competitor mono-, di-, and tri-valent metal cations. Sorption properties are weakly influenced by the excess of NaCl; this can explain the outstanding sorption properties in the treatment of seawater samples. In addition, the sulfonated sorbent shows excellent stability at recycling (for at least 5 cycles), with a loss in capacity of around 2.2%. These preliminary results show the remarkable efficiency of the sorbent for Sr(II) removal from complex solutions (this could open perspectives for the treatment of contaminated seawater samples).
Subject(s)
Water Pollutants, Chemical , Adsorption , Water Pollutants, Chemical/chemistry , Sodium Chloride , Seawater , Water , Kinetics , Strontium , Sulfonic Acids , Amines , Hydrogen-Ion ConcentrationABSTRACT
The recovery of strategic metals such as rare earth elements (REEs) requires the development of new sorbents with high sorption capacities and selectivity. The bi-functionality of sorbents showed a remarkable capacity for the enhancement of binding properties. This work compares the sorption properties of magnetic chitosan (MC, prepared by dispersion of hydrothermally precipitated magnetite microparticles (synthesized through Fe(II)/Fe(III) precursors) into chitosan solution and crosslinking with glutaraldehyde) with those of the urea derivative (MC-UR) and its sulfonated derivative (MC-UR/S) for cerium (as an example of REEs). The sorbents were characterized by FTIR, TGA, elemental analysis, SEM-EDX, TEM, VSM, and titration. In a second step, the effect of pH (optimum at pH 5), the uptake kinetics (fitted by the pseudo-first-order rate equation), the sorption isotherms (modeled by the Langmuir equation) are investigated. The successive modifications of magnetic chitosan increases the maximum sorption capacity from 0.28 to 0.845 and 1.25 mmol Ce g-1 (MC, MC-UR, and MC-UR/S, respectively). The bi-functionalization strongly increases the selectivity of the sorbent for Ce(III) through multi-component equimolar solutions (especially at pH 4). The functionalization notably increases the stability at recycling (for at least 5 cycles), using 0.2 M HCl for the complete desorption of cerium from the loaded sorbent. The bi-functionalized sorbent was successfully tested for the recovery of cerium from pre-treated acidic leachates, recovered from low-grade cerium-bearing Egyptian ore.
Subject(s)
Cerium , Chitosan , Chitosan/chemistry , Ferrosoferric Oxide , Adsorption , Urea , Ferric Compounds , Hydrogen-Ion Concentration , KineticsABSTRACT
The development of new materials is needed to address the environmental challenges of wastewater treatment. The phosphorylation of guar gum combined with its association to chitosan allows preparing an efficient sorbent for the removal of U(VI) from slightly acidic solutions. The incorporation of magnetite nanoparticles enhances solid/liquid. Functional groups are characterized by FTIR spectroscopy while textural properties are qualified by N2 adsorption. The optimum pH is close to 4 (deprotonation of amine and phosphonate groups). Uptake kinetics are fast (60 min of contact), fitted by a pseudo-first order rate equation. Maximum sorption capacities are close to 1.28 and 1.16 mmol U g-1 (non-magnetic and magnetic, respectively), while the sorption isotherms are fitted by Langmuir equation. Uranyl desorption (using 0.2 M HCl solutions) is achieved within 20-30 min; the sorbents can be recycled for at least five cycles (5-6% loss in sorption performance, complete desorption). In multi-component solutions, the sorbents show marked preference for U(VI) and Nd(III) over alkali-earth metals and Si(IV). The zone of exclusion method shows that magnetic sorbent has antibacterial effects against both Gram+ and Gram- bacteria, contrary to non-magnetic material (only Gram+ bacteria). The magnetic composite is highly promising as antimicrobial support and for recovery of valuable metals.
Subject(s)
Chitosan/chemistry , Galactans/chemistry , Magnetite Nanoparticles/chemistry , Mannans/chemistry , Nanocomposites/chemistry , Plant Gums/chemistry , Uranium/chemistry , Water Purification/methods , Adsorption , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Gram-Positive Bacteria/drug effects , Kinetics , PhosphorylationABSTRACT
The strong demand for rare-earth elements (REEs) is driven by their wide use in high-tech devices. New processes have to be developed for valorizing low-grade ores or alternative metal sources (such as wastes and spent materials). The present work contributed to the development of new sorbents for the recovery of rare earth ions from aqueous solutions. Functionalized mesoporous silica composite was synthesized by grafting diethylenetriamine onto composite support. The physical and chemical properties of the new sorbent are characterized using BET, TGA, elemental analysis, titration, FTIR, and XPS spectroscopies to identify the reactive groups (amine groups: 3.25 mmol N g-1 and 3.41 by EA and titration, respectively) and their mode of interaction with Nd(III) and Gd(III). The sorption capacity at the optimum pH (i.e., 4) reaches 0.9 mmol Nd g-1 and 1 mmol Gd g-1. Uptake kinetics are modeled by the pseudo-first-order rate equation (equilibrium time: 30-40 min). At pH close to 4-5, the sorbent shows high selectivity for rare-earth elements against alkali-earth elements. This selectivity is confirmed by the efficient recovery of REEs from acidic leachates of gibbsite ore. After elution (using 0.5 M HCl solutions), selective precipitation (using oxalate solutions), and calcination, pure rare earth oxides were obtained. The sorbent shows promising perspective due to its high and fast sorption properties for REEs, good recycling, and high selectivity.
Subject(s)
Amines/chemistry , Gadolinium/chemistry , Neodymium/chemistry , Polymers/chemistry , Silicon Dioxide/chemistry , Adsorption , Hydrogen-Ion Concentration , Industrial Waste/analysis , Kinetics , Photoelectron Spectroscopy , Porosity , Solutions , Spectroscopy, Fourier Transform InfraredABSTRACT
The key to effective separation of neptunium from the spent fuel reprocessing process is to adjust and control its valence state. Hydrazine and its derivatives have been experimentally confirmed to be effective salt-free reductants for reducing Np(VI) to Np(V). We theoretically studied the reduction reactions of Np(VI) with three hydrazine derivatives (2-hydroxyethyl hydrazine (HOC2H4N2H3), methyl hydrazine (CH3N2H3), and formyl hydrazide (CHON2H3)) and obtained the free radical ion mechanism and the free radical mechanism. Their potential energy profiles (PEPs) suggest that the free radical mechanism is the most probable reaction. Based on the energy barrier of the free radical ion mechanism, the trend of the reduction ability of the three hydrazine derivatives is HOC2H4N2H3 > CH3N2H3 > CHON2H3, which is in excellent agreement with the experimental results. Lastly, the analyses of natural bond orbitals (NBOs), quantum theory of atoms-in-molecules (QTAIM), and electron localization function (ELF) have been carried out to explore the bonding evolution of the structures along the reaction pathways. This work provides an insight into the reduction mechanism of Np(VI) with hydrazine derivatives from the theoretical perspective and helps to design more effective reductants for the separation of U/Np and Np/Pu in spent fuel reprocessing.
ABSTRACT
Every year, a large quantity of vanadium-containing wastewater is discharged from industrial factories, resulting in severe environmental problems. In particular, V(V) is recognized as a potentially hazardous contaminant due to its high mobility and toxicity, and it has received considerable attention. In this study, a silica-supported primary amine resin (SiPAR) was prepared by in-situ polymerization, and the V(V) adsorption from the solution was examined. The as-prepared resin exhibited fast adsorption kinetics, and it could attain an equilibrium within 90 min for the V(V) solution concentration of 100 mg/L at an optimum pH of 4, whereas the commercial D302 resin required a treatment time of more than 3 h under the same conditions. Furthermore, the maximum adsorption capacity of the resin under optimum conditions for V(V) was calculated to be 70.57 mg/g. In addition, the kinetics and isotherm data were satisfactorily elucidated with the pseudo-second-order kinetics and Redlich-Peterson models, respectively. The silica-based resin exhibited an excellent selectivity for V(V), and the removal efficiency exceeded 97% in the presence of competitive anions at 100 mmol/L concentrations. The film mass-transfer coefficient (kf) and V(V) pore diffusivity (Dp) onto the resins were estimated by mathematical modeling. In summary, this study provided a potential adsorbent for the efficient removal of V(V) from wastewater.
Subject(s)
Amines/chemistry , Silicon Dioxide/chemistry , Vanadium/chemistry , Water Pollutants, Chemical/chemistry , Water Purification , Adsorption , KineticsABSTRACT
There is a need for developing new sorbents that incorporate renewable resources for the treatment of metal-containing solutions. Algal-polyethyleneimine beads (APEI) (reinforced with alginate) are functionalized by grafting amidoxime groups (AO-APEI). Physicochemical characteristics of the new material are characterized using FTIR, XPS, TGA, SEM, SEM-EDX, and BET. AO-APEI beads are tested for the recovery of Sr(II) from synthetic solutions after pH optimization (≈ pH 6). Uptake kinetics is fast (equilibrium ≈ 60-90 min). Sorption isotherm (fitted by the Langmuir equation) shows remarkable sorption capacity (≈ 189 mg Sr g-1). Sr(II) is desorbed using 0.2 M HCl/0.5 M CaCl2 solution; sorbent recycling over five cycles shows high stability in terms of sorption/desorption performances. The presence of competitor cations is studied in relation to the pH; the selectivity for Sr(II) is correlated to the softness parameter. Finally, the recovery of Sr(II) is carried out in complex solutions (seawater samples): AO-APEI is remarkably selective over highly concentrated metal cations such as Na(I), K(I), Mg(II), and Ca(II), with weaker selectivity over B(I) and As(V). AO-APEI appears to be a promising material for selective recovery of strontium from complex solutions (including seawater).
Subject(s)
Microspheres , Oximes/chemistry , Polyethyleneimine/chemistry , Rhodophyta/chemistry , Strontium/isolation & purification , Adsorption , Hydrogen-Ion Concentration , Kinetics , Photoelectron Spectroscopy , Rheology , Seawater/chemistry , Solutions , Temperature , Water Pollutants, Chemical/isolation & purificationABSTRACT
Studying the bonding nature of uranyl ion and graphene oxide (GO) is very important for understanding the mechanism of the removal of uranium from radioactive wastewater with GO-based materials. We have optimized 22 complexes between uranyl ion and GO applying density functional theory (DFT) combined with quasi-relativistic small-core pseudopotentials. The studied oxygen-containing functional groups include hydroxyl, carboxyl, amido, and dimethylformamide. It is observed that the distances between uranium atoms and oxygen atoms of GO (U-OG) are shorter in the anionic GO complexes (uranyl/GO(-/2-)) compared to the neutral GO ones (uranyl/GO). The formation of hydrogen bonds in the uranyl/GO(-/2-) complexes can enhance the binding ability of anionic GO toward uranyl ions. Furthermore, the thermodynamic calculations show that the changes of the Gibbs free energies in solution are relatively more negative for complexation reactions concerning the hydroxyl and carboxyl functionalized anionic GO complexes. Therefore, both the geometries and thermodynamic energies indicate that the binding abilities of uranyl ions toward GO modified by hydroxyl and carboxyl groups are much stronger compared to those by amido and dimethylformamide groups. This study can provide insights for designing new nanomaterials that can efficiently remove radionuclides from radioactive wastewater.
Subject(s)
Graphite/chemistry , Oxides/chemistry , Quantum Theory , Uranium/chemistry , Ions/chemistryABSTRACT
To promote the environmentally friendly and sustainable development of nuclear energy, it is imperative to address the treatment of wastewater generated by the nuclear industry. This necessitates the enhancement of fission product reclamation efficiency post-treatment. This study aims to combine defect control and confined self-assembly strategies for the precise design of interlayer spacing (14.6 Å to 15.1 Å), leading to the fabrication of conditional natroxalate-functionalized vanadosilicate, and its potential application in the efficient adsorption and reclamation of 90Sr. Na0.03Natroxalate2.47Si1.44Nb0.08V1.92O5·1.2 H2O (Nb4-NxSiVO), with a layer spacing of 14.9 Å, exhibits the highest Sr(II) adsorption capacity (248.76 mg/g), enabling effective separation with Cs+. The natroxalate embedded within the confined interlayers demonstrates excellent stability, offering rapid (within 10 min) and stable adsorption sites for Sr(II). Furthermore, Nb4-NxSiVO exhibits a wide band gap and exceptional thermal stability before and after adsorption, rendering hard desorption of 90Sr. The findings highlight the potential of Nb4-NxSiVO as a promising adsorbent for rapid and selective purification of 90Sr-containing wastewater and further application in nuclear batteries.
ABSTRACT
Zirconium is recognized as one of the main impurities of the rare earth element scandium during purification. It presents significant challenges due to its similar chemical properties, making separating it difficult. This study used trialkyl phosphine oxide (TRPO) as a functional ligand, and the effects of carrier type and acidity on adsorption performance were first investigated. Among these, the novel extraction resin SiO2-P as a carrier for TRPO demonstrated more prominent separation performance in 0.2 M H2SO4 and 5 M HCl solutions. The kinetic and isotherm data were consistent with the pseudo-secondary kinetics and Langmuir model, respectively, and the adsorption process could be regarded as homogeneous monolayer adsorption subject to the dual effects of chemisorption and internal diffusion. In addition, thermodynamic analysis showed that the adsorption process of zirconium under the experimental conditions was a spontaneous endothermic process. Combined with the results of SEM-EDS, FT-IR, and XPS analyses, scandium and zirconium were successfully adsorbed by the resin and uniformly distributed on its surface, and the greater affinity of the P=O groups on the resin for zirconium was the critical factor contributing to the separation of scandium and zirconium. Finally, scandium and zirconium in sulfuric acid and hydrochloric acid media were extracted and separated by column experiments, and the purity of scandium could reach 99.8% and 99.99%, respectively.
ABSTRACT
A MOF-on-MOF composite derivative material named ZIF-67@Ce-MOF-600 was designed and synthesized. The preparation of ZIF-67@Ce-MOF-600 was optimized from the aspects of the ratio of metal and ligand, heat-treatment temperature. It was demonstrated by XRD, FT-IR, SEM-EDS and TEM. The optimum conditions for the activation of PMS by ZIF-67@Ce-MOF-600 for the degradation of tetracycline (TC) were investigated by adjusting the catalyst dosage, TC, pH, peoxymonosulfate (PMS) concentration, and different kinds of water, co-existing anions and pollution. Under optimal conditions (20 mg catalysts and 50 mg PMS added) in 100 mL of tetracyclines (TC) solvent (20 mg TC/L), the removal rate could reach up to 99.2% and after five cycles was 70.5%. The EPR results indicated the presence of free radicals and non-free radical, among which free radicals intended to play a major role in the degradation process. Its possible degradation pathways and attack sites were analyzed by liquid-phase mass spectrometry and DFT analysis.
Subject(s)
Metal-Organic Frameworks , Peroxides , Tetracycline , Water Pollutants, Chemical , Metal-Organic Frameworks/chemistry , Water Pollutants, Chemical/chemistry , Tetracycline/chemistry , Peroxides/chemistry , Water Purification/methods , Catalysis , Water/chemistryABSTRACT
Radioactive strontium (90Sr) is considered as one of the most dangerous radionuclides due to its high biochemical toxicity. For the efficient and selective separation of Sr from acidic environments, a novel functional adsorbent CEPA@SBA-15-APTES was prepared in this work through the phosphorylation of amino-modified mesoporous silica with organic content of approximately 20 wt%. CEPA@SBA-15-APTES was characterized by TEM, SEM, EDS, TG-DSC, BET, FTIR, and XPS techniques, revealing its characteristics of an ordered hexagonal lattice-like structure and rich functional groups. The experimental results demonstrated that the adsorbent exhibited good adsorption capacity for Sr over a wide acidity range (i.e., from 10-10 M to 4 M HNO3). The adsorption equilibriums of Sr by CEPA@SBA-15-APTES in 10-6 M and 3 M HNO3 solutions were reached within 30 and 5 min, respectively, and the adsorption capacities at 318 K were 112.6 and 71.8 mg/g, respectively. Furthermore, by combining the experimental and characterization results, we found that the adsorption mechanism consisted of ion exchange between Sr(II) and H+ (in P-OH) in the 10-6 M HNO3 solution and coordination between the Sr(II) and oxygen-containing (CO and P = O) functional groups in the 3 M HNO3 solution.
ABSTRACT
Efficient recognition, separation and recovery of palladium from high-level liquid waste (HLLW) not only helps the safe, green and environmentally friendly disposal of nuclear waste, but also is an essential important supplement to overcome the growing shortage of natural palladium resources. Herein, a novel silica-based functional adsorbent named 2AT-SiAaC was prepared by a two-step method, i.e., grafting of 2-aminothiazole (2AT) via the amidated reaction after in-situ polymerization of acrylic monomers on porous silica. SEM, EDS, TG-DSC, BET and PXRD all proved the successful preparation of 2AT-SiAaC, and it exhibited ultrahigh adsorption selectivity for Pd(II) (Kd (distribution coefficient) ≥ 10,344.2 mL/g, SFPd/M (separation factor) ≥ 613.7), fast adsorption kinetics with short equilibrium time (t ≤ 1 h) and good adsorption capacity (Q ≥ 62.1 mg Pd/g). The dynamic column experiments shows that 2AT-SiAaC achieved efficiently separation of Pd(II) from simulated HLLW, and the enrichment coefficients (C/C0) of Pd(II) was as high as about 14 with the recovery rate nearly 99.9% and basically kept the same performance in three adsorption-desorption column cycle experiments. The adsorption mechanism was analyzed by FT-IR, XPS and DFT calculations, and the ultrahigh selectivity of 2AT-SiAaC was attributed to the preferred affinity of the soft N-donor atoms in 2AT for Pd(II). NO3- ions participated in the adsorption reaction to keep charge balance, and the frontier orbital electron density distribution diagram shows the charge transfer in the process of material preparation and adsorption. To sum up, 2AT-SiAaC adsorbent provided a new insight for precise recognition and efficient separation of Pd(II) from HLLW.
Subject(s)
Palladium , Thiazoles , Water Pollutants, Chemical , Palladium/analysis , Silicon Dioxide , Spectroscopy, Fourier Transform Infrared , Adsorption , KineticsABSTRACT
Accurate separation and efficient recovery of platinum group metals (PGMs, mainly Ru, Rh and Pd) from high level liquid waste (HLLW) is a good choice for clean production and sustainable development of nuclear energy. Herein a novel SDB polymer modified silica-based amine-functionalized composite (dNbpy/SiO2-P) was synthesized for the separation and recovery of PGMs. Laser particle size analysis and BET results clarified the regular spherical and highly interconnected mesoporous structure of dNbpy/SiO2-P which is critical for the separation of PGMs. The removal percent of PGMs were over 99% on the optimized conditions. In addition, dNbpy/SiO2-P showed excellent selectivity (SFPd/M > 3805, SFRu/M > 1705, SFRh/M > 336) and repeatability (≥5). Interestingly, based on the different adsorption and desorption kinetics of PGMs, a double-column strategy is designed to solve the challenge of separating and recovering PGMs from HLLW. The enrichment factors of Pd(II), Ru(III) and Rh(III) reached 36.7, 8.2, and 1.2. The adsorption of PGMs was coordination mechanism and required the involvement of NO3- to maintain charge balance. The specific distribution of elements within the adsorbents and the changes in valence state were analyzed using depth-profiling XPS. Both depth-profiling XPS results and slope analysis revealed that the complex of dNbpy and PGMs is a 1 : 1 coordination structure. Overall, this work fills the gap that PGMs cannot be effectively separated and enriched from HLLW.
ABSTRACT
Ruthenium is required to separate from high-level liquid waste (HLLW) because Ru is a valuable resource and is negatively influential on the vitrification process of HLLW. However, the separation of Ru is very challenging due to its complicated complexation properties. In this study, the adsorption and desorption characteristics of ruthenium on a synthesized SiPyR-N3 (weak-base anion exchange resin with pyridine functional groups) composite were investigated in nitric acid and nitrite-nitric acid systems, respectively, and the adsorption mechanism was explored. The experimental results showed that SiPyR-N3 has a significantly better adsorption effect on Ru in the nitrite-nitric acid system than in the nitric acid system, with an increase in the adsorption capacity of approximately three times. The maximum adsorption capacity of Ru is 45.6 mg/g in the nitrite-nitric acid system. The SiPyR-N3 possesses good adsorption selectivity (SFRu/other metal ions is around 100) in 0.1 M NO2--0.1 M HNO3 solution. The adsorption processes of Ru in the two different systems are fitted with the pseudo-second-order kinetic model and Langmuir model for uptake kinetics and adsorption isotherms, respectively. The results obtained from the FT-IR, XPS, and UV absorption spectrometry indicate that NO2- was involved in the adsorption process either as a complexing species with the metal ions or as free NO2- from the solution. A 0.1 M HNO3 + 1 M thiourea mixed solution shows effective desorption performance, and the desorption efficiency can reach 92% at 328 K.