Chalcogenide GRIN glasses with high refractive index and large refractive index difference for LWIR imaging.

Gradient refractive index (GRIN) materials utilize an internally tailored refractive index in combination with the designed curvature of the optical element surface, providing the optical designer with additional freedom for correcting chromatic and spherical aberrations. In this paper, new GRIN materials suitable for the second (3-5 µm) and third (8-12 µm) atmospheric windows were successfully developed by the thermal diffusion method based on Ge20As20Se60-xTex series high refractive index glasses, where the maximum refractive index difference (Δn) at 4 µm and 10.6 µm were 0.281 and 0.277, respectively. The diffusion characteristics and refractive index distribution of the GRIN glass were analyzed by Raman characterization. Furthermore, the performance of GRIN singlet and homogeneous singlet in the LWIR band (8 µm, 10.6 µm (primary wavelength), 12 µm) was compared, and the results showed that the GRIN singlet had better chromatic aberration correction and unique dispersion characteristics.

Low-loss chalcogenide microstructured optical fibers prepared by eliminating interfaces defects.

The loss of chalcogenide microstructured optical fibers (ChG-MOFs) is generally higher than that of step fibers, mainly due to the immature fiber preform preparation method and strong waveguide defect scattering. Chemical polishing is used to polish mechanically drilled preforms to prepare ChG-MOFs with low defect scattering. Firstly, the scattering loss caused by the defective layer of ChG-MOFs is studied theoretically and experimentally. Then, a single-mode photonic crystal fiber (PCF) was prepared to verify the effect of chemical polishing on reducing fiber loss. The experimental results show that the PCF average loss is reduced from more than 8 dB/m to less than 2 dB/m, and the minimum loss reaches 0.8 dB/m @ 2.7 µm. At the same time, the bending strength of the PCF after chemical polishing is also significantly improved.

Large mode-area all-solid anti-resonant fiber based on chalcogenide glass for mid-infrared transmission.

A large mode-area chalcogenide all-solid anti-resonant fiber has been designed and successfully prepared for the first time. The numerical results show that the high-order mode extinction ratio of the designed fiber can reach 6000, and the maximum mode-area is 1500 um2. The fiber possesses a calculated low bending loss of less than 10-2 dB/m as the bending radius is larger than 15 cm. In addition, there is a low normal dispersion of -3 ps/nm/km at 5 µm, which is beneficial for the transmission of high power mid-infrared laser. Finally, a completely structured all-solid fiber was prepared by the precision drilling and two-stage rod-in-tube methods. The fabricated fibers transmit in the mid-infrared spectral range from 4.5 to 7.5 µm with the lowest loss of 7 dB/m @ 4.8 µm. Modeling suggests that the theoretical loss of the optimized structure is consistent with that of the prepared structure in the long wavelength band.

Development and characteristics of infrared gradient refractive index chalcogenide glasses by hot pressing.

Compared with ordinary uniform lenses, the length and refractive index distribution of gradient refractive index (GRIN) lenses can effectively correct aberration and chromatic aberration. This advantage makes the miniaturization, integration, and lens lightweight possible. Although the visible GRIN lenses based on silicate glass are widely used, the infrared GRIN lenses based on chalcogenide glass are still elusive. This paper introduces a new method for preparing this kind of lens by hot pressing sintering diffusion of chalcogenide glasses. A series of chalcogenide glasses Ge10As22Se68-xSx (x = 4, 7, 10, 14, 24, 28, 34 mol%) with refractive index range from 2.37 to 2.57 (n@8 µm) and similar glass transition temperature (ΔTg < 10℃) were prepared by melt quenching. The relationship between Raman peaks and the refractive index of glasses was studied. Furthermore, the refractive index profile formed by elemental diffusion was characterized by Raman signals. The results show that the diffusion length reaches more than 290 µm, and larger diffusion distances can be achieved by stacking multiple layers. The obtained GRIN glass maintains good transmittance in the whole atmospheric window of 2 ∼ 12 µm.