ABSTRACT
Due to the environmental and production problems of emulsion, it is important to efficiently separate oil-water emulsion to meet the refinery requirement and clean up oil spills. Synthesis of a universal demulsifier is not an easy task because the physical properties of crude oil vary, which makes its characterization and demulsification procedure difficult. To overcome this problem, hydrophilic and magnetically recoverable poly (methyl methacrylate-acrylic acid)/iron oxide magnetic composite nanoparticles ((P(MMA-AA)/Fe3O4 NPs) were developed as an efficient and economical demulsifier via soap-free emulsion polymerization. To characterize the magnetic composite NPs for their appropriate surface morphology and magnetic domain, TEM, FTIR, VSM, and TGA analyses were carried out. The newly synthesized NPs displayed good hydrophilic properties as they migrated quickly to the aqueous emulsion phase, which was also reassured by their water contact angle of 75°. They exhibit strong magnetic characteristics (20 amu/g) in the oil-water emulsion, makings the hydrophilic wettability capable and attractive to the external magnet. Experimental results revealed that the prepared magnetic composite NPs separated 99% of the water from stable emulsion in 30 min and could be recycled 8 times through magnetic separation. The recycled magnetic composite NPs maintain their hydrophilic wettability and efficiency in separating oil-water emulsion, making them economical and commercially viable. The migration of magnetic composite NPs to the aqueous phase in the stable emulsion with a strong magnetic domain explains the coalescence of emulsified water droplets and their quick separation from the stable emulsions through the external magnet.
Subject(s)
Nanostructures , Water , Acrylates , Emulsions , Ferric Compounds , Magnetic Phenomena , Methacrylates , Methylmethacrylate , Oils , WettabilityABSTRACT
Heterojunction nanocomposites (ZnO:NiO:CuO) were synthesized via a hydrothermal method and annealed at three different temperatures (400 °C, 600 °C, and 800 °C). The structural, optical, and electrical properties were examined by employing XRD, SEM, UV-Vis, FTIR, and LCR meter techniques to investigate the effects of annealing. Increasing the annealing temperature resulted in the nanocomposites (NCPs) exhibiting enhanced crystallinity, purity, optical properties, and improved electrical and dielectric behavior. The calculated crystalline sizes (Debye-Scherrer method) of the NCPs were determined to be 21, 26 and 34 nm for annealing temperature 400 °C, 600 °C, and 800 °C, respectively. The calculated bandgaps of synthesized samples were found in the range of 2.92-2.55 eV. This temperature-dependent annealing process notably influenced particle size, morphology, band-gap characteristics, and photocatalytic efficiency. EDX analysis affirmed the sample purity, with elemental peaks of Zn, Cu, Ni, and O. These NCPs demonstrated exceptional photocatalytic activity against various dyes solutions (Methyl orange (MO), Methylene Blue (MB), and mixed solution of dyes) under sunlight and also showed good antibacterial properties assessed by the disc diffusion method. Notably, the nanocomposite annealed at 400 °C exhibited a particularly high degradation efficiency by degrading 96% MB and 91% MO in just 90 min under sunlight.
ABSTRACT
In this article, ZnO:NiO:CuO nanocomposites (NCPs) were synthesized using a hydrothermal method, with different Zn : Ni : Cu molar ratios (1 : 1 : 1, 2 : 1 : 1, 1 : 2 : 1, and 1 : 1 : 1). The PXRD confirmed the formation of a NCP consisting of ZnO (hexagonal), NiO (cubic), and CuO (monoclinic) structures. The crystallite sizes of NCPs were calculated using Debye Scherrer and Williamson-Hall methods. The calculated crystalline sizes (Scherrer method) of the NCPs were determined to be 21, 27, 23, and 20 nm for the molar ratios 1 : 1 : 1, 2 : 1 : 1, 1 : 2 : 1, and 1 : 1 : 2, respectively. FTIR spectra confirmed the successful formation of heterojunction NCPs via the presence of metal-oxygen bonds. The UV-vis spectroscopy was used to calculate the bandgap of synthesized samples and was found in the range of 2.99-2.17 eV. SEM images showed the mixed morphology of NCPs i.e., irregular spherical and rod-like structures. The dielectric properties, including AC conductivity, dielectric constant, impedance, and dielectric loss parameters were measured using an LCR meter. The DC electrical measurements revealed that NCPs have a high electrical conductivity. All the NCPs were evaluated for the photocatalytic degradation of Methylene blue (MB), methyl orange (MO), and a mixture of both of these dyes. The NCPs with a molar ratio 1 : 1 : 2 (Zn : Ni : Cu) displayed outstanding photocatalytic activity under sunlight, achieving the degradation efficiency of 98% for methylene blue (MB), 92% for methyl orange (MO) and more than 87% in the case of a mixture of dyes within just 90 minutes of illumination. The antibacterial activity results showed the more noxious nature of NCPs against Gram-negative bacteria with a maximum zone of inhibition revealed by the NCPs of molar ratio 1 : 2 : 1 (Zn : Ni : Cu). On the basis of these observations, it can be anticipated that the NCPs can be successfully employed for the purification of contaminated water by the degradation of hazardous organic compounds and in antibacterial ointments.
ABSTRACT
BACKGROUND: Intentional replantation (IR) is a reliable and predictable treatment option for cases with failed non-surgical root canal treatment. The success of IR is found to be 52-95%. The current case is of 35years old female who presented with severe pain and swelling in lower right first mandibular molar with previously initiated non-surgical root canal treatment that resulted in instrument separation in mesio-buccal canal. Periapical radiograph showed rarefactions at furcation area, mesial and distal root apices. It was decided to complete the non-surgical root canal treatment followed by intentional replantation and retrograde filling with MTA. The tooth was found to be asymptomatic after two years follow up and periapical radiographs depicted complete healing. Intentional replantation with careful case selection is a successful, easy and reliable treatment option for hopeless cases. Atraumatic extraction, minimum extra-alveolar time and aseptic techniques during the procedure are the key factors for success of the procedure.
Subject(s)
Molar , Tooth Replantation , Humans , Female , Follow-Up Studies , Molar/surgery , Root Canal Therapy , Tooth RootABSTRACT
Congenital maxillomandibular syngnathia is characterized by fusion of jaws. Depending on the severity, it has a wide range of clinical presentations. It can be complete /incomplete and may be unilateral or bilateral. Primary concern in such patients is maintenance of airway and feeding difficulties. Therefore, early recognition and management is important to reduce nutritional, feeding, airway difficulties and growth-related problems in such new-borns. This case report presents a case of syngnathia in a 4-day infant with bilateral fusion of maxilla and mandible, leaving a small anterior portion. Early intervention was planned and the fusion was released to facilitate feeding. Good mouth opening was seen on 1week follow-up.
Subject(s)
Jaw Abnormalities , Mandible , Maxilla , Humans , Infant, Newborn , Male , Mandible/physiopathology , Mandible/surgery , Maxilla/physiopathology , Maxilla/surgeryABSTRACT
Aquatic ecosystem contaminated with toxic pollutants and heavy metals due to the rapid growth of industrialization has become a top-priority global concern exhibiting highly adverse effects on human health and the environment. Many treatment techniques have been envisioned for the removal of these toxic contaminants from the aqueous environment. Among these techniques, magnetic separation has attracted burgeoning research attention owing to its simplicity, eco-friendly nature, large surface area, electron mobility, and excellent performance for removing water contaminants. In particular, interfacial active nanoparticles and nanocomposites with unique structures and magnetic properties are considered as ideal provides candidates in material science for next-generation water treatment. This review gives an insight into current research activities associated with the synthesis strategies and applications of interfacially active and magnetically responsive nanomaterials and nanocomposites for sustainable purification processes. In the first half, various synthesis routes for magnetic iron oxide nanoparticles development and the corresponding formation mechanism are summarized. In the second half, we reviewed the magnetic and wettability properties of interfacially active and magnetically responsive nanocomposites and their environmental applications including oil-water separation, removal of hazardous dye-based pollutants and potentially toxic heavy metals. Finally, the review is wrapped up with major concluding remarks and future perspectives of these magnetic nanoscale composite materials for sustainable wastewater remediation.