ABSTRACT
Solar water purification is a promising technology with a strong potential for producing fresh water without effluent discharge. For energy-intensive interfacial vapor generation, energy loss to air via heat radiation and convection occurs commonly but is normally ignored, which severely limits the energy efficiency. Therefore, it is necessary to precisely regulate the interfacial thermal energy for interfacial vapor generation. Here, we developed a hierarchically porous radiation-absorbing hydrogel film (hp-RAH) through an in situ gelation strategy and employed this hp-RAH on various existing solar evaporator surfaces. The hydrogel film efficiently absorbs and reutilizes the thermal radiation energy emitted by the photothermal layer and eradicates thermal convection of the photothermal layer into air. In this way, an evaporation efficiency up to 95% is obtained, and the heat radiation and convection losses are reduced from 6.6% to 0.39% under 1 sun. This strategy demonstrates a promising membrane evaporation prototype based on the evaporation surface thermal utilization.
Subject(s)
Sunlight , Water Purification , Hydrogels , MethylgalactosidesABSTRACT
Hydrogel, recognized as a promising biomaterial for tissue engineering, possesses notable characteristics, including high water uptake, an interconnected porous structure, and excellent permeability. However, the intricate task of fabricating a hierarchically macro-micronanoporous structure, essential for providing adequate space for nutrient diffusion and cell growth within hydrogels, remains a formidable challenge. In response to these challenges, this study introduces a sustainable and straightforward three-dimensional (3D) foaming printing strategy to produce hierarchically macro-micronanoporous hydrogels (HPHs) without the utilization of porogens and post-etching process. This method entails the controlled generation of air bubbles within the hydrogels through the application of optimal mechanical stirring rates. Subsequent ultraviolet (UV) cross-linking serves to effectively stabilize the macropores within the HPHs. The resulting hierarchically macro-micronanoporous structures demonstrate a substantial improvement in the viability, adhesion, and proliferation of human umbilical vein endothelial cells (HUVECs) when incubated with the hydrogels. These findings present a significant advancement in the fabrication of hierarchically macro-micronanoporous hydrogels, with potential applications in the fields of tissue engineering and organoid development.
Subject(s)
Biomimetics , Hydrogels , Humans , Hydrogels/pharmacology , Hydrogels/chemistry , Tissue Engineering/methods , Human Umbilical Vein Endothelial Cells , Cell Proliferation , Printing, Three-Dimensional , Tissue Scaffolds/chemistryABSTRACT
Macrophages are highly heterogeneous and exhibit a diversity of functions and phenotypes. They can be divided into pro-inflammatory macrophages (M1) and anti-inflammatory macrophages (M2). Diabetic wounds are characterized by a prolonged inflammatory phase and difficulty in healing due to the accumulation of pro-inflammatory (M1) macrophages in the wound. Therefore, hydrogel dressings with macrophage heterogeneity regulation function hold great promise in promoting diabetic wound healing in clinical applications. However, the precise conversion of pro-inflammatory M1 to anti-inflammatory M2 macrophages by simple and biosafe approaches is still a great challenge. Here, an all-natural hydrogel with the ability to regulate macrophage heterogeneity is developed to promote angiogenesis and diabetic wound healing. The protocatechuic aldehyde hybridized collagen-based all-natural hydrogel exhibits good bioadhesive and antibacterial properties as well as reactive oxygen species scavenging ability. More importantly, the hydrogel is able to convert M1 macrophages into M2 macrophages without the need for any additional ingredients or external intervention. This simple and safe immunomodulatory approach shows great application potential for shortening the inflammatory phase of diabetic wound repair and accelerating wound healing.
Subject(s)
Diabetes Mellitus , Hydrogels , Humans , Wound Healing/physiology , Macrophages , PhenotypeABSTRACT
Wearable strain sensors have huge potential for applications in healthcare, human-machine interfacing, and augmented reality systems. However, the nonlinear response of the resistance signal to strain has caused considerable difficulty and complexity in data processing and signal transformation, thus impeding their practical applications severely. Herein, we propose a simple way to achieve linear and reproducible resistive signals responding to strain in a relatively wide strain range for flexible strain sensors, which is achieved via the fabrication of Janus and heteromodulus elastomeric fiber mats with micropatterns using microimprinting second processing technology. In detail, both isotropic and anisotropic fiber mats can turn into Janus fiber mats with periodical and heteromodulus micropatterns via controlling the fiber fusion and the diffusion of local macromolecular chains of thermoplastic elastomers. The Janus heterogeneous microstructure allows for stress redistribution upon stretching, thus leading to lower strain hysteresis and improved linearity of resistive signal. Moreover, tunable sensing performance can be achieved by tailoring the size of the micropatterns on the fiber mat surface and the fiber anisotropy. The Janus mat strain sensors with high signal linearity and good reproducibility have a very low strain detection limit, enabling potential applications in human-machine interfacing and intelligent control fields if combined with a wireless communication module.
Subject(s)
Wearable Electronic Devices , Humans , Reproducibility of Results , Elastomers , ElasticityABSTRACT
Traditional devices, including conventional rigid electronics and machines, as well as emerging wearable electronics and soft robotics, almost all have a single mechanical state for particular service purposes. Nonetheless, dynamic materials with interchangeable mechanical states, which enable more diverse and versatile applications, are urgently necessary for intelligent and adaptive application cases in the future electronic and robot fields. Here, we report a gel-like material composed of a crosslinking polymer network impregnated with a phase changing molten liquid, which undergoes an exceptional stiffness transition in response to a thermal stimulus. Vice versa, the material switches from a soft gel state to a rigid solid state with a dramatic stiffness change of 105 times (601 MPa versus 4.5 kPa) benefiting from the liquid-solid phase change of the crystalline polymer once cooled. Such reversibility of the phase and mechanical transition upon thermal stimuli enables the dynamic gel mechanical transformation, demonstrating potential applications in an adhesive thermal interface gasket (TIG) to facilitate thermal transport, a high-temperature warning sensor and an intelligent gripper. Overall, this dynamic gel with a tunable stiffness change paves a new way to design and fabricate adaptive smart materials toward intelligent control of versatile devices.
ABSTRACT
Acute kidney injury (AKI), as a common oxidative stress-related renal disease, causes high mortality in clinics annually, and many other clinical diseases, including the pandemic COVID-19, have a high potential to cause AKI, yet only rehydration, renal dialysis, and other supportive therapies are available for AKI in the clinics. Nanotechnology-mediated antioxidant therapy represents a promising therapeutic strategy for AKI treatment. However, current enzyme-mimicking nanoantioxidants show poor biocompatibility and biodegradability, as well as non-specific ROS level regulation, further potentially causing deleterious adverse effects. Herein, the authors report a novel non-enzymatic antioxidant strategy based on ultrathin Ti3 C2 -PVP nanosheets (TPNS) with excellent biocompatibility and great chemical reactivity toward multiple ROS for AKI treatment. These TPNS nanosheets exhibit enzyme/ROS-triggered biodegradability and broad-spectrum ROS scavenging ability through the readily occurring redox reaction between Ti3 C2 and various ROS, as verified by theoretical calculations. Furthermore, both in vivo and in vitro experiments demonstrate that TPNS can serve as efficient antioxidant platforms to scavenge the overexpressed ROS and subsequently suppress oxidative stress-induced inflammatory response through inhibition of NF-κB signal pathway for AKI treatment. This study highlights a new type of therapeutic agent, that is, the redox-mediated non-enzymatic antioxidant MXene nanoplatforms in treatment of AKI and other ROS-associated diseases.
Subject(s)
Acute Kidney Injury/drug therapy , Antioxidants/pharmacology , Oxidation-Reduction/drug effects , Polyvinyls/pharmacology , Pyrrolidines/pharmacology , Titanium/pharmacology , Acute Kidney Injury/metabolism , Apoptosis/drug effects , Humans , Kidney/drug effects , Kidney/metabolism , Oxidative Stress/drug effects , Reactive Oxygen Species/metabolism , Signal Transduction/drug effectsABSTRACT
An increasing utilization of flexible healthcare electronics and biomedicine-related therapeutic materials urges the development of multifunctional wearable/flexible smart fabrics for personal therapy and health management. However, it is currently a challenge to fabricate multifunctional and on-body healthcare electronic devices with reliable mechanical flexibility, excellent breathability, and self-controllable joule heating effects. Here, we fabricate a multifunctional MXene-based smart fabric by depositing 2D Ti3C2Tx nanosheets onto cellulose fiber nonwoven fabric via special MXene-cellulose fiber interactions. Such multifunctional fabrics exhibit sensitive and reversible humidity response upon H2O-induced swelling/contraction of channels between the MXene interlayers, enabling wearable respiration monitoring application. Besides, it can also serve as a low-voltage thermotherapy platform due to its fast and stable electro-thermal response. Interestingly, water molecular extraction induces electrical response upon heating, i.e., functioning as a temperature alarm, which allows for real-time temperature monitoring for thermotherapy platform without low-temperature burn risk. Furthermore, metal-like conductivity of MXene renders the fabric an excellent Joule heating effect, which can moderately kill bacteria surrounding the wound in bacteria-infected wound healing therapy. This work introduces a multifunctional smart flexible fabric suitable for next-generation wearable electronic devices for mobile healthcare and personal medical therapy.
Subject(s)
Heating , Titanium , Delivery of Health Care , Humidity , TextilesABSTRACT
Hydrogel bioelectronics as one of the next-generation wearable and implantable electronics ensures excellent biocompatibility and softness to link the human body and electronics. However, volatile, opaque, and fragile features of hydrogels due to the sparse and microscale three-dimensional network seriously limit their practical applications. Here, we report a type of smart and robust nanofibrillar poly(vinyl alcohol) (PVA) organohydrogels fabricated via one-step physical cross-linking. The nanofibrillar network cross-linked by numerous PVA nanocrystallites enables the formation of organohydrogels with high transparency (90%), drying resistance, high toughness (3.2 MJ/m3), and tensile strength (1.4 MPa). For strain sensor application, the PVA ionic organohydrogel after soaking in NaCl solution shows excellent linear sensitivity (GF = 1.56, R2 > 0.998) owing to the homogeneous nanofibrillar PVA network. We demonstrate the potential applications of the nanofibrillar PVA-based organohydrogel in smart contact lens and emotion recognition. Such a strategy paves an effective way to fabricate strong, tough, biocompatible, and ionically conductive organohydrogels, shedding light on multifunctional sensing applications in next-generation flexible bioelectronics.
Subject(s)
Contact Lenses , Hydrogels/chemistry , Monitoring, Physiologic/instrumentation , Nanofibers/chemistry , Polyvinyl Alcohol/chemistry , Wearable Electronic Devices , Electric Conductivity , Facial Recognition , Humans , Movement , Nanoparticles/chemistry , Tensile StrengthABSTRACT
Solar-driven interfacial water evaporation is regarded as an effective, renewable, and environment-friendly technology for clean water production. However, biofouling caused by the nonspecific interaction between the steam generator and biofoulants generally hinders the efficient application of wastewater treatment. Herein, this work reports a facile strategy to fabricate flexible anti-biofouling fibrous photothermal membrane consisting of a MXene-coated cellulose membrane for highly efficient solar-driven water steam evaporation toward water purification applications. The as-prepared MXene/cellulose photothermal membrane exhibits light absorption efficiency as high as â¼94% in a wide solar spectrum range and a water evaporation rate up to 1.44 kg m-2 h-1 under one solar illumination. Also, the MXene/cellulose membrane shows very high antibacterial efficiency (above 99.9%) owing to the MXene coating as a highly effective bacteriostatic agent. Such a flexible, anti-biofouling, and high-efficiency photothermal membrane sheds light on practical applications in long-term wastewater treatments.
Subject(s)
Biofouling , Cellulose/chemistry , Membranes, Artificial , Sunlight , Titanium/chemistry , Water Purification , Cellulose/ultrastructure , Escherichia coli/ultrastructure , Graphite/chemistry , Microbial Viability , Pliability , Staphylococcus aureus/ultrastructure , Steam , Water SupplyABSTRACT
Increasingly serious electromagnetic radiation pollution puts higher demands on wearable devices. Electronic sensor skin capable of shielding electromagnetic radiation can provide extra protection in emerging fields such as electronic skins, robotics, and artificial intelligence, but combining the sensation and electromagnetic shielding performance together remains a great challenge. Here, inspired by the structure and functions of the human skin, a multifunctional electronic skin (M-E-skin) with both tactile sensing and electromagnetic radiation shielding functions is proposed. The tactile sensing of human skin is mimicked with irregular dermislike rough surfaces, and the electromagnetic shielding performance not available on natural skin is introduced by mimicking the ultraviolet electromagnetic radiation absorption of melanin in epidermis. The M-E-skin shows superior sensitivity (9.8 × 104 kPa-1 for the pressure range 0-0.2 kPa and 3.5 × 103 kPa-1 within 0.2-20 kPa), broad operating range (0-20 kPa), fast response and relaxation times (<62.5 ms), great pressuring-relaxing stability (10 kPa, 1000 cycles), low operating voltage (0.1 V), low power consumption (1.5 nW), and low detection limit (5 Pa). Besides, a broad range of electromagnetic wave (0.5-7.5 GHz) is shielded more than 99.66% by the M-E-skin. This work holds great potential to enlarge the application scope of current electronic skins.
Subject(s)
Biomimetics , Electromagnetic Phenomena , Sensation , Wearable Electronic Devices , Humans , Nanowires/ultrastructure , Silver/chemistryABSTRACT
New generation wearable devices require mechanically compliant strain sensors with a high sensitivity in a full detecting range. Herein, novel 2D end-to-end contact conductive networks of multi-walled carbon nanotubes (MWCNTs) were designed and realized in an ethylene-α-octene block copolymer (OBC) matrix. The prepared strain sensor showed a high gauge factor (GF) of 248 even at a small strain (5%) and a linear resistance response throughout the whole strain range. The sensors also exhibited very good stretchability up to 300% and high cycling durability. This novel design solved the intrinsic problem of sensors based on carbon nanotube bundles, i.e., a long sliding phase before the disconnection of CNTs in a cost-effective and scalable way. This study rationalizes the 2D end-to-end contact concept to improve the sensitivity of the existing sensors and has great potential to be used in a wide variety of polymer based sensors.