Steering the Selectivity of Carbon Dioxide Electroreduction from Single-Carbon to Multicarbon Products on Metal-Organic Frameworks via Facet Engineering.

Although metal-organic frameworks (MOFs) have attracted more attention for the electrocatalytic CO2 reduction reaction (CO2RR), obtaining multicarbon products with a high Faradaic efficiency (FE) remains challenging, especially under neutral conditions. Here, we report the controlled synthesis of stable Cu(I) 5-mercapto-1-methyltetrazole framework (Cu-MMT) nanostructures with different facets by rationally modulating the reaction solvents. Significantly, Cu-MMT nanostructures with (001) facets are acquired using isopropanol as a solvent, which favor multicarbon production with an FE of 73.75% and a multicarbon:single-carbon ratio of 3.93 for CO2RR in a neutral electrolyte. In sharp contrast, Cu-MMT nanostructures with (100) facets are obtained utilizing water, promoting single-carbon generation with an FE of 63.98% and a multicarbon: single-carbon ratio of only 0.18. Furthermore, this method can be extended to other Cu-MMT nanostructures with different facets in tuning the CO2 reduction selectivity. This work opens up new opportunities for the highly selective and efficient CO2 electroreduction to multicarbon products on MOFs via facet engineering.

Phase Engineering of Zirconium MOFs Enables Efficient Osmotic Energy Conversion: Structural Evolution Unveiled by Direct Imaging.

Creating structural defects in a controlled manner within metal-organic frameworks (MOFs) poses a significant challenge for synthesis, and concurrently, identifying the types and distributions of these defects is also a formidable task for characterization. In this study, we demonstrate that by employing 2-sulfonylterephthalic acid as the ligand for synthesizing Zr (or Hf)-based MOFs, a crystal phase transformation from the common fcu topology to the rare jmt topology can be easily facilitated using a straightforward mixed-solvent strategy. The jmt phase, characterized by an extensively open framework, can be considered a derivative of the fcu phase, generated through the introduction of missing-cluster defects. We have explicitly identified both MOF phases, their intermediate states, and the novel core-shell structures they form using ultralow-dose high-resolution transmission electron microscopy. In addition to facilitating phase engineering, the incorporation of sulfonic groups in MOFs imparts ionic selectivity, making them applicable for osmotic energy harvesting through mixed matrix membrane fabrication. The membrane containing the jmt-phase MOF exhibits an exceptionally high peak power density of 10.08 W m-2 under a 50-fold salinity gradient (NaCl: 0.5 M|0.01 M), which surpasses the threshold of 5 W m-2 for commercial applications and can be attributed to the combination of large pore size, extensive porosity, and abundant sulfonic groups in this novel MOF material.

Fabrication of Oriented MOF-Based Mixed Matrix Membrane via Ion-Induced Synchronous Synthesis.

Developing a facile strategy for constructing oriented mixed matrix membranes (MMMs) with uniformly dispersed and high-loading metal-organic frameworks (MOFs) is a crucial scientific challenge in probing the enhanced capability and potential applications of MOF-polymer MMMs. Herein, a novel synchronous synthetic method for constructing oriented CuBDC/poly(m-phenylenediamine) (CuBDC/PmPD) MMM with uniform MOF dispersion at high loading at the air-solution interface via the dual function of metal ions is reported. The resulting MMM exhibits excellent separation performance in ion sieving and seawater desalination due to the structural integrity of the proposed membrane and the highly interconnected channels created through the oriented distribution of MOF in a polymer matrix. Such a cutting-edge approach may provide promising insights into the development of advanced MMMs with optimized structure and superior performances.

A Customized Hydrophobic Porous Shell for MOF-5.

The susceptibility to moisture of metal-organic frameworks (MOFs) is a critical bottleneck for their wider practical application. Constructing core-shell composites has been postulated as an effective strategy for enhancing moisture resistance, but for fragile MOFs this has rarely been accomplished. We report herein, for the first time, the construction of a customized hydrophobic porous shell, NTU-COF, on the particularly fragile MOF-5 by a "Plug-Socket Anchoring" strategy. Notably, the pore structure of MOF-5 was well maintained, and it could still achieve complete CO2/N2 separation under humid conditions. The homogeneous interface between MOF-5 and NTU-COF has been inspected at atomic resolution by a combination of cryogenic focused ion beam (cryo-FIB) and ultralow-dose (scanning) transmission electron microscope giving profound insight into the mechanism of assembly of the core-shell structure. This work presents a facile strategy for the fabrication of a hydrophobic porous shell for labile MOFs, and provides a general approach for solving the problem of moisture instability of porous materials for practical applications.

Three-Dimensional Covalent Organic Frameworks with Ultra-Large Pores for Highly Efficient Photocatalysis.

Benefiting from their unique structural merits, three-dimensional (3D) large-pore COF materials demonstrate high surface areas and interconnected large channels, which makes these materials promising in practical applications. Unfortunately, functionalization strategies and application research are still absent in these structures. To this end, a series of functional 3D stp-topologized COFs are designed based on porphyrin or metalloporphyrin moieties, named JUC-640-M (M = Co, Ni, or H). Interestingly, JUC-640-H exhibits a record-breaking low crystal density (0.106 cm3 g-1) among all crystalline materials, along with the largest interconnected pore size (4.6 nm) in 3D COFs, high surface area (2204 m2 g-1), and abundant exposed porphyrin moieties (0.845 mmol g-1). Inspired by the unique structural characteristics and photoelectrical performance, JUC-640-Co is utilized for the photoreduction of CO2 to CO and demonstrates a high CO production rate (15.1 mmol g-1 h-1), selectivity (94.4%), and stability. It should be noted that the CO production rate of JUC-640-Co has exceeded those of all reported COF-based materials. This work not only produces a series of novel 3D COFs with large channels but also provides a new guidance for the functionalization and applications of COFs.

Ground-State Spin Dynamics in d1 Kagome-Lattice Titanium Fluorides.

Many quantum magnetic materials suffer from structural imperfections. The effects of structural disorder on bulk properties are difficult to assess systematically from a chemical perspective due to the complexities of chemical synthesis. The recently reported S = 1/2 kagome lattice antiferromagnet, (CH3NH3)2NaTi3F12, 1-Ti, with highly symmetric kagome layers and disordered interlayer methylammonium cations, shows no magnetic ordering down to 0.1 K. To study the impact of structural disorder in the titanium fluoride kagome compounds, (CH3NH3)2KTi3F12, 2-Ti, was prepared. It presents no detectable structural disorder and only a small degree of distortion of the kagome lattice. The methylammonium disorder model of 1-Ti and order in 2-Ti were confirmed by atomic-resolution transmission electron microscopy. The antiferromagnetic interactions and band structures of both compounds were calculated based on spin-polarized density functional theory and support the magnetic structure analysis. Three spin-glass-like (SGL) transitions were observed in 2-Ti at 0.5, 1.4, and 2.3 K, while a single SGL transition can be observed in 1-Ti at 0.8 K. The absolute values of the Curie-Weiss temperatures of both 1-Ti (-139.5(7) K) and 2-Ti (-83.5(7) K) are larger than the SGL transition temperatures, which is indicative of geometrically frustrated spin glass (GFSG) states. All the SGL transitions are quenched with an applied field >0.1 T, which indicates novel magnetic phases emerge under small applied magnetic fields. The well-defined structure and the lack of structural disorder in 2-Ti suggest that 2-Ti is an ideal model compound for studying GFSG states and the potential transitions between spin liquid and GFSG states.

Topological Isomerism in Three-Dimensional Covalent Organic Frameworks.

Although isomerism is a typical and significant phenomenon in organic chemistry, it is rarely found in covalent organic framework (COF) materials. Herein, for the first time, we report a controllable synthesis of topological isomers in three-dimensional COFs via a distinctive tetrahedral building unit under different solvents. Based on this strategy, both isomers with a dia or qtz net (termed JUC-620 and JUC-621) have been obtained, and their structures are determined by combining powder X-ray diffraction and transmission electron microscopy. Remarkably, these architectures show a distinct difference in their porous features; for example, JUC-621 with a qtz net exhibits permanent mesopores (up to ∼23 Å) and high surface area (∼2060 m2 g-1), which far surpasses those of JUC-620 with a dia net (pore size of ∼12 Å and surface area of 980 m2 g-1). Furthermore, mesoporous JUC-621 can remove dye molecules efficiently and achieves excellent iodine adsorption (up to 6.7 g g-1), which is 2.3 times that of microporous JUC-620 (∼2.9 g g-1). This work thus provides a new way for constructing COF isomers and promotes structural diversity and promising applications of COF materials.

Interface Density Engineering on Heterogeneous Molybdenum Dichalcogenides Enabling Highly Efficient Hydrogen Evolution Catalysis and Sodium Ion Storage.

Constructing active heterointerfaces is powerful to enhance the electrochemical performances of transition metal dichalcogenides, but the interface density regulation remains a huge challenge. Herein, MoO2 /MoS2 heterogeneous nanorods are encapsulated in nitrogen and sulfur co-doped carbon matrix (MoO2 /MoS2 @NSC) by controllable sulfidation. MoO2 and MoS2 are coupled intimately at atomic level, forming the MoO2 /MoS2 heterointerfaces with different distribution density. Strong electronic interactions are triggered at these MoO2 /MoS2 heterointerfaces for enhancing electron transfer. In alkaline media, the optimal material exhibits outstanding hydrogen evolution reaction (HER) performances that significantly surpass carbon-covered MoS2 nanorods counterpart (η10 : 156 mV vs 232 mV) and most of the MoS2 -based heterostructures reported recently. First-principles calculation deciphers that MoO2 /MoS2 heterointerfaces greatly promote water dissociation and hydrogen atom adsorption via the O-Mo-S electronic bridges during HER process. Moreover, benefited from the high pseudocapacitance contribution, abundant "ion reservoir"-like channels, and low Na+ diffusion barrier appended by high-density MoO2 /MoS2 heterointerfaces, the material delivers high specific capacity of 888 mAh g-1 , remarkable rate capability and cycling stability of 390 cycles at 0.1 A g-1 as the anode of sodium ion battery. This work will undoubtedly light the way of interface density engineering for high-performance electrochemical energy conversion and storage systems.

Cryogenic Focused Ion Beam Enables Atomic-Resolution Imaging of Local Structures in Highly Sensitive Bulk Crystals and Devices.

With the development of ultralow-dose (scanning) transmission electron microscopy ((S)TEM) techniques, atomic-resolution imaging of highly sensitive nanomaterials has recently become possible. However, applying these techniques to the study of sensitive bulk materials remains challenging due to the lack of suitable specimen preparation methods. We report that cryogenic focused ion beam (cryo-FIB) can provide a solution to this challenge. We successfully extracted thin specimens from metal-organic framework (MOF) crystals and a hybrid halide perovskite single-crystal film solar cell using cryo-FIB without damaging the inherent structures. The high quality of the specimens enabled the subsequent (S)TEM and electron diffraction studies to reveal complex unknown local structures at an atomic resolution. The obtained structural information allowed us to resolve planar defects in MOF HKUST-1, three-dimensionally reconstruct a concomitant phase in MOF UiO-66, and discover a new CH3NH3PbI3 structure and locate its distribution in a single-crystal film perovskite solar cell. This proof-of-concept study demonstrates that cryo-FIB has a unique ability to handle highly sensitive materials, which can substantially expand the range of applications for electron microscopy.

Highly Crystalline Polyimide Covalent Organic Framework as Dual-Active-Center Cathode for High-Performance Lithium-Ion Batteries.

Polyimide covalent organic framework (PI-COF) materials that can realize intrinsic redox reactions by changing the charge state of their electroactive sites are considered as emerging electrode materials for rechargeable devices. However, the highly crystalline PI-COFs with hierarchical porosity are less reported due to the rapid reaction between monomers and the poor reversibility of the polyimidization reaction. Here, we developed a water-assistant synthetic strategy to adjust the reaction rate of polyimidization, and PI-COF (COFTPDA-PMDA) with kgm topology consisting of dual active centers of N,N,N',N'-tetrakis(4-aminophenyl)-1,4-benzenediamine (TPDA) and pyromellitic dianhydride (PMDA) ligands was successfully synthesized with high crystallinity and porosity. The COFTPDA-PMDA possesses hierarchical micro-/mesoporous channels with the largest surface area (2669 m2/g) in PI-COFs, which can promote the Li+ ions and bulky bis(trifluoromethanesulfonyl)imide (TFSI-) ions in organic electrolyte to sufficiently interact with the dual active sites on COF skeleton to increase the specific capacity of cathode materials. As a cathode material for lithium-ion batteries, COFTPDA-PMDA@50%CNT which integrated high surface area and dual active center of COFTPDA-PMDA with carbon nanotubes via π-π interactions gave a high initial charge capacity of 233 mAh/g (0.5 A/g) and maintains at 80 mAh/g even at a high current density of 5.0 A/g after 1800 cycles.

Chemically Stable Guanidinium Covalent Organic Framework for the Efficient Capture of Low-Concentration Iodine at High Temperatures.

The capture of radioactive I2 vapor from nuclear waste under industrial operating conditions remains a challenging task, as the practical industrial conditions of high temperature (≥150 °C) and low I2 concentration (∼150 ppmv) are unfavorable for I2 adsorption. We report a novel guanidinium-based covalent organic framework (COF), termed TGDM, which can efficiently capture I2 under industrial operating conditions. At 150 °C and 150 ppmv I2, TGDM exhibits an I2 uptake of ∼30 wt %, which is significantly higher than that of the industrial silver-based adsorbents such as Ag@MOR (17 wt %) currently used in the nuclear fuel reprocessing industry. Characterization and theoretical calculations indicate that among the multiple types of adsorption sites in TGDM, only ionic sites can bond to I2 through strong Coulomb interactions under harsh conditions. The abundant ionic groups of TGDM account for its superior I2 capture performance compared to various benchmark adsorbents. In addition, TGDM exhibits exceptionally high chemical and thermal stabilities that fully meet the requirements of practical radioactive I2 capture (high-temperature, humid, and acidic environment) and differentiate it from other ionic COFs. Furthermore, TGDM has excellent recyclability and low cost, which are unavailable for the current industrial silver-based adsorbents. These advantages make TGDM a promising candidate for capturing I2 vapor during nuclear fuel reprocessing. This strategy of incorporating chemically stable ionic guanidine moieties in COF would stimulate the development of new adsorbents for I2 capture and related applications.

Investigating the Origin of Enhanced C2+ Selectivity in Oxide-/Hydroxide-Derived Copper Electrodes during CO2 Electroreduction.

Oxide-/hydroxide-derived copper electrodes exhibit excellent selectivity toward C2+ products during the electrocatalytic CO2 reduction reaction (CO2RR). However, the origin of such enhanced selectivity remains controversial. Here, we prepared two Cu-based electrodes with mixed oxidation states, namely, HQ-Cu (containing Cu, Cu2O, CuO) and AN-Cu (containing Cu, Cu(OH)2). We extracted an ultrathin specimen from the electrodes using a focused ion beam to investigate the distribution and evolution of various Cu species by electron microscopy and electron energy loss spectroscopy. We found that at the steady stage of the CO2RR, the electrodes have all been reduced to Cu0, regardless of the initial states, suggesting that the high C2+ selectivities are not associated with specific oxidation states of Cu. We verified this conclusion by control experiments in which HQ-Cu and AN-Cu were pretreated to fully reduce oxides/hydroxides to Cu0, and the pretreated electrodes showed even higher C2+ selectivity compared with their unpretreated counterparts. We observed that the oxide/hydroxide crystals in HQ-Cu and AN-Cu were fragmented into nanosized irregular Cu grains under the applied negative potentials. Such a fragmentation process, which is the consequence of an oxidation-reduction cycle and does not occur in electropolished Cu, not only built an intricate network of grain boundaries but also exposed a variety of high-index facets. These two features greatly facilitated the C-C coupling, thus accounting for the enhanced C2+ selectivity. Our work demonstrates that the use of advanced characterization techniques enables investigating the structural and chemical states of electrodes in unprecedented detail to gain new insights into a widely studied system.

Direct Imaging of Atomically Dispersed Molybdenum that Enables Location of Aluminum in the Framework of Zeolite ZSM-5.

Integrated differential phase-contrast scanning transmission electron microscopy (iDPC-STEM) is capable of directly probing guest molecules in zeolites, owing to its sufficient and interpretable image contrast for both heavy and light elements under low-dose conditions. This unique ability is demonstrated by imaging volatile organic compounds adsorbed in zeolite Silicalite-1; iDPC-STEM was then used to investigate molybdenum supported on various zeolites including Silicalite-1, ZSM-5, and mordenite. Isolated single-Mo clusters were observed in the micropores of ZSM-5, demonstrating the crucial role of framework Al in driving Mo atomically dispersed into the micropores. Importantly, the specific one-to-one Mo-Al interaction makes it possible to locate Al atoms, that is, catalytic active sites, in the ZSM-5 framework from the images, according to the positions of Mo atoms in the micropores.

Direct Imaging of Tunable Crystal Surface Structures of MOF MIL-101 Using High-Resolution Electron Microscopy.

Metal-organic frameworks (MOFs) are often synthesized using various additives to modulate the crystallization. Here, we report the direct imaging of the crystal surface of MOF MIL-101 synthesized with different additives, using low-dose high-resolution transmission electron microscopy (HRTEM), and identify three distinct surface structures, at subunit cell resolution. We find that the mesoporous cages at the outermost surface of MIL-101 can be opened up by vacuum heating treatment at different temperatures, depending on the MIL-101 samples. We monitor the structural evolution of MIL-101 upon vacuum heating, using in situ X-ray diffraction, and find the results to be in good agreement with HRTEM observations, which leads us to speculate that additives have an influence not only on the surface structure but also on the stability of framework. In addition, we observe solid-solid phase transformation from MIL-101 to MIL-53 taking place in the sample synthesized with hydrofluoric acid.

Two-Dimensional SnO Anodes with a Tunable Number of Atomic Layers for Sodium Ion Batteries.

We have systematically changed the number of atomic layers stacked in 2D SnO nanosheet anodes and studied their sodium ion battery (SIB) performance. The results indicate that as the number of atomic SnO layers in a sheet decreases, both the capacity and cycling stability of the Na ion battery improve. The thinnest SnO nanosheet anodes (two to six SnO monolayers) exhibited the best performance. Specifically, an initial discharge and charge capacity of 1072 and 848 mAh g-1 were observed, respectively, at 0.1 A g-1. In addition, an impressive reversible capacity of 665 mAh g-1 after 100 cycles at 0.1 A g-1 and 452 mAh g-1 after 1000 cycles at a high current density of 1.0 A g-1 was observed, with excellent rate performance. As the average number of atomic layers in the anode sheets increased, the battery performance degraded significantly. For example, for the anode sheets with 10-20 atomic layers, only a reversible capacity of 389 mAh g-1 could be obtained after 100 cycles at 0.1 A g-1. Density functional theory calculations coupled with experimental results were used to elucidate the sodiation mechanism of the SnO nanosheets. This systematic study of monolayer-dependent physical and electrochemical properties of 2D anodes shows a promising pathway to engineering and mitigating volume changes in 2D anode materials for sodium ion batteries. It also demonstrates that ultrathin SnO nanosheets are promising SIB anode materials with high specific capacity, stable cyclability, and excellent rate performance.

Anisotropic Self-Assembly of Organic-Inorganic Hybrid Microtoroids.

Toroidal structures based on self-assembly of predesigned building blocks are well-established in the literature, but spontaneous self-organization to prepare such structures has not been reported to date. Here, organic-inorganic hybrid microtoroids synthesized by simultaneous coordination-driven assembly of amphiphilic molecules and hydrophilic polymers are reported. Mixing amphiphilic molecules with iron(III) chloride and hydrophilic polymers in water leads, within minutes, to the formation of starlike nanostructures. A spontaneous self-organization of these nanostructures is then triggered to form stable hybrid microtoroids. Interestingly, the toroids exhibit anisotropic hierarchical growth, giving rise to a layered toroidal framework. These microstructures are mechanically robust and can act as templates to host metallic nanoparticles such as gold and silver. Understanding the nature of spontaneous assembly driven by coordination multiple non-covalent interactions can help explain the well-ordered complexity of many biological organisms in addition to expanding the available tools to mimic such structures at a molecular level.

Development of an immersive virtual reality head-mounted display with high performance.

To resolve the contradiction between large field of view and high resolution in immersive virtual reality (VR) head-mounted displays (HMDs), an HMD monocular optical system with a large field of view and high resolution was designed. The system was fabricated by adopting aspheric technology with CNC grinding and a high-resolution LCD as the image source. With this monocular optical system, an HMD binocular optical system with a wide-range continuously adjustable interpupillary distance was achieved in the form of partially overlapping fields of view (FOV) combined with a screw adjustment mechanism. A fast image processor-centered LCD driver circuit and an image preprocessing system were also built to address binocular vision inconsistency in the partially overlapping FOV binocular optical system. The distortions of the HMD optical system with a large field of view were measured. Meanwhile, the optical distortions in the display and the trapezoidal distortions introduced during image processing were corrected by a calibration model for reverse rotations and translations. A high-performance not-fully-transparent VR HMD device with high resolution (1920×1080) and large FOV [141.6°(H)×73.08°(V)] was developed. The full field-of-view average value of angular resolution is 18.6 pixels/degree. With the device, high-quality VR simulations can be completed under various scenarios, and the device can be utilized for simulated trainings in aeronautics, astronautics, and other fields with corresponding platforms. The developed device has positive practical significance.

Metal-organic framework based upon the synergy of a Brønsted acid framework and Lewis acid centers as a highly efficient heterogeneous catalyst for fixed-bed reactions.

We report a strategy of combining a Brønsted acid metal-organic framework (MOF) with Lewis acid centers to afford a Lewis acid@Brønsted acid MOF with high catalytic activity, as exemplified in the context of MIL-101-Cr-SO3H·Al(III). Because of the synergy between the Brønsted acid framework and the Al(III) Lewis acid centers, MIL-101-Cr-SO3H·Al(III) demonstrates excellent catalytic performance in a series of fixed-bed reactions, outperforming two benchmark zeolite catalysts (H-Beta and HMOR). Our work therefore not only provides a new approach to achieve high catalytic activity in MOFs but also paves a way to develop MOFs as a new type of highly efficient heterogeneous catalysts for fixed-bed reactions.

The ITQ-37 mesoporous chiral zeolite.

The synthesis of crystalline molecular sieves with pore dimensions that fill the gap between microporous and mesoporous materials is a matter of fundamental and industrial interest. The preparation of zeolitic materials with extralarge pores and chiral frameworks would permit many new applications. Two important steps in this direction include the synthesis of ITQ-33, a stable zeolite with 18 x 10 x 10 ring windows, and the synthesis of SU-32, which has an intrinsically chiral zeolite structure and where each crystal exhibits only one handedness. Here we present a germanosilicate zeolite (ITQ-37) with extralarge 30-ring windows. Its structure was determined by combining selected area electron diffraction (SAED) and powder X-ray diffraction (PXRD) in a charge-flipping algorithm. The framework follows the SrSi(2) (srs) minimal net and forms two unique cavities, each of which is connected to three other cavities to form a gyroidal channel system. These cavities comprise the enantiomorphous srs net of the framework. ITQ-37 is the first chiral zeolite with one single gyroidal channel. It has the lowest framework density (10.3 T atoms per 1,000 A(3)) of all existing 4-coordinated crystalline oxide frameworks, and the pore volume of the corresponding silica polymorph would be 0.38 cm(3) g(-1).

Highly mesoporous single-crystalline zeolite beta synthesized using a nonsurfactant cationic polymer as a dual-function template.

Mesoporous zeolites are useful solid catalysts for conversion of bulky molecules because they offer fast mass transfer along with size and shape selectivity. We report here the successful synthesis of mesoporous aluminosilicate zeolite Beta from a commercial cationic polymer that acts as a dual-function template to generate zeolitic micropores and mesopores simultaneously. This is the first demonstration of a single nonsurfactant polymer acting as such a template. Using high-resolution electron microscopy and tomography, we discovered that the resulting material (Beta-MS) has abundant and highly interconnected mesopores. More importantly, we demonstrated using a three-dimensional electron diffraction technique that each Beta-MS particle is a single crystal, whereas most previously reported mesoporous zeolites are comprised of nanosized zeolitic grains with random orientations. The use of nonsurfactant templates is essential to gaining single-crystalline mesoporous zeolites. The single-crystalline nature endows Beta-MS with better hydrothermal stability compared with surfactant-derived mesoporous zeolite Beta. Beta-MS also exhibited remarkably higher catalytic activity than did conventional zeolite Beta in acid-catalyzed reactions involving large molecules.