Cubitus varus deformity following paediatric supracondylar humeral fracture remodelling predominantly in the sagittal direction: A three-dimensional analysis of eighty-six cases.

PURPOSE: Three-dimensional (3D) capacity for remodelling in cubitus varus deformity (CVD) after paediatric supracondylar humeral fractures (PSHFs) remains unelucidated. This study investigated remodelling patterns after PSHFs by examining 3D deformity distribution over time after injury. METHODS: Computed tomography (CT) data of 86 patients with CVD after PSHFs were analysed. The 3D deformity angles in the sagittal, coronal, and axial directions were assessed and correlated with the duration between the age at injury and CT evaluation. For the subgroup analysis, we performed the same correlation analysis in a younger (< 8 years old) and an older group (≥ 8 years old); we categorized the duration into early (< 2 years), middle (≥ 2 to < 5 years), and late periods (≥ 5 years) and compared the deformity angles of each direction among the three groups. RESULTS: Sagittal deformity showed a moderate correlation with the duration of deformity (r = -0.54; P < 0.001), while coronal and axial deformities showed a negligible correlation. Sagittal deformity showed moderate correlations with the duration in the younger group (r = -0.62; P < 0.001) and weak correlations in the older group (r = -0.37; P = 0.091). In the sagittal direction, the deformity angle in the early period was significantly larger than those in the mid and late periods (P < 0.001). However, there were no significant differences among the three groups in the coronal and axial directions. CONCLUSION: Sagittal deformities in CVDs are capable of remodelling, especially in the early period and at a younger age, whereas coronal and axial deformities are less likely to undergo remodelling.

Altered bone density and stress distribution patterns in long-standing cubitus varus deformity and their effect during early osteoarthritis of the elbow.

OBJECTIVE: To quantify the bone density and stress distribution patterns in long-standing cubitus varus and clarify the effects of the deformity on bone density. DESIGN: We created three-dimensional computed tomography (CT) elbow models from 21 patients with long-standing cubitus varus deformities without advanced osteoarthritis (OA) and assessed the deformity by superimposing the affected humerus onto a mirror-image of the contralateral normal. Elbows were divided into 13 regions before measuring the bone density of each region and comparing the percentage of high-density volume (%HDV) between affected and normal sides. We constructed finite element models and quantitatively analyzed stress distribution. RESULTS: Average degrees of deformities were 20.1° of varus, 6.4° of extension, and 12.7° of internal rotation. The medial side of the affected humerus and ulna, Anteromedial trochlea (P < 0.001), Medial coronoid (P = 0.004), and Medial olecranon (P = 0.049) had significantly higher %HDVs than their normal counterparts. Conversely, %HDVs on the affected lateral side, Capitellum (P < 0.001), Anterolateral trochlea (P = 0.010), Posterolateral trochlea (P < 0.001), Lateral coronoid (P = 0.007), and Lateral olecranon (P < 0.001) were significantly lower than the normal side. The affected radial head %HDVs at Anterolateral and Posteromedial quadrants were high (P = 0.007) and low (P = 0.007), respectively. The bone density distribution coincided with stress distribution patterns revealed by finite element analysis (FEA), except in the lateral region influenced by forearm rotation. CONCLUSIONS: Repetitive stress on the medial elbow may alter bone density distribution patterns, probably presenting from early stage of OA.

[Comparative study of external fixator combined with Kirschner wire fixation and Kirschner wires fixation in treatment of cubitus varus deformity in children].

Objective: To analyze the effectiveness comparison of external fixator combined with Kirschner wire fixation and Kirschner wire fixation in the treatment of cubitus varus deformity in children. Methods: A retrospective case-control study was conducted to collect 36 children of postoperative supracondylar humerus fracture complicating cubitus varus deformity between January 2018 and July 2022. Among them, 17 cases were treated with distal humeral wedge osteotomy external fixation combined with Kirschner wire fixation (observation group), and 19 cases were treated with distal humeral wedge osteotomy and Kirschner wire fixation (control group). The baseline data including age, gender, deformity side, time from fracture to operation, carrying angle of the healthy side and preoperative carrying angle of the affected side, elbow flexion and extension range of motion, and lateral condylar prominence index (LCPI) showed no significant difference between the two groups ( P>0.05). The operation time, hospitalization cost, healing time of osteotomy, postoperative complications, and the carrying angle, LCPI, and elbow flexion and extention range of motion were recorded and compared between the two groups. The elbow function was assessed by Oppenheim score at 3 months after operation and at last follow-up. Results: The children in both groups were followed up 13-48 months, with an average of 26.7 months. There was 1 case of needle tract infection in the observation group and 2 cases in the control group, and no nerve injury occurred, the difference in the incidence of complication (5.88% vs 10.53%) between the two groups was not significant ( χ 2=0.502, P=0.593). There was no significant difference in the operation time and fracture healing time between the two groups ( P>0.05); the hospitalization cost of the observation group was significantly higher than that of the control group ( P<0.05). The Oppenheim score of the observation group was significantly better than that of the control group at 3 months after operation ( P<0.05), but there was no significant difference in the Oppenheim score between the two groups at last follow-up ( P>0.05). At last follow-up, the carrying angle of affected side significantly improved in both groups when compared with preoperative ones ( P<0.05); the differences of the pre- and post-operative carrying angle of affected side and elbow flexion and extension range of motion showed no significant differences between the two groups ( P>0.05), but the difference in pre- and post-operative LCPI of the observation group was significantly better than that of the control group ( P<0.05). Conclusion: External fixator combined with Kirschner wire fixation and Kirschner wire fixation both can achieve satisfactory correction of cubitus varus deformity in children, and the former can achieve better short-term functional recovery of elbow joint and reduce the incidence of humeral lateral condyle protrusion.

Three-dimensional corrective osteotomy for cubitus varus deformity using patient-matched instruments.

Background: Various methods of two or three-dimensional (3D) corrective osteotomy for cubitus varus deformity have been reported. However, whether 3D correction of cubitus varus deformity is necessary is controversial because of technical difficulties and surgical complications. This study introduced 3D simulations and printing technology for corrective osteotomy against cubitus varus deformities. Moreover, recent studies on the application of these technologies were reviewed. Methods: The amount of 3D deformity was calculated based on the difference in 3D shape between the affected side and the contralateral normal side. Patient-matched instruments were created to perform the actual surgery as simulated. Further, a 3D corrective osteotomy was performed using patient-matched instruments for cubitus varus deformity in pediatric and adolescent patients. The humerus-elbow-wrist angle, tilting angle, and elbow ranges of motion were evaluated. Results: Humerus-elbow-wrist angle and tilting angle were corrected from -21° to 14° and from 30° to 43°, respectively, in the pediatric patient and from -18° to 10° and from 20° to 40°, respectively, in the adolescent patient. The elbow flexion and extension angles changed from 130° to 140° and from 20° to 10°, respectively, in the pediatric patient and from 120° to 130° and from 15° to 0°, respectively, in the adolescent patient. Conclusion: The 3D computer simulations and the use of patient-matched instruments for cubitus varus deformity are reliable and can facilitate an accurate and safe correction. These technologies can simplify the complexity of 3D surgical procedures and contribute to the standardization of treatment for cubitus varus deformity.

[Computer-simulated osteotomy based on health-side combined with guide plate technique in treatment of cubitus varus deformity in adolescents].

Objective: To explore the feasibility and early effectiveness of computer-simulated osteotomy based on the health-side combined with guide plate technique in the treatment of cubitus varus deformity in adolescents. Methods: The clinical data of 23 patients with cubitus varus deformity who met the selection criteria between June 2019 and February 2023 were retrospectively analyzed. There were 17 males and 6 females, ranging in age from 4 to 16 years with an average of 8.5 years. The time from injury to operation was 1-4 years. The angle of distal humerus rotation was defined by humeral head posterior inclination angle using low radiation dose CT to scan the patient's upper extremity data at one time, and the preoperative rotation of the distal humerus on the affected side was (33.82±4.39)°. The CT plain scan data were imported into 9yuan3D digital orthopaedic system (V3.34 software) to reconstruct three-dimensional images of both upper extremities. The simulated operation was performed with the healthy upper extremity as the reference, the best osteotomy scheme was planned, overlapped and compared, and the osteotomy guide plate was prepared. The patients were followed up regularly after operation, and the formation of callus in the osteotomy area was observed by X-ray examination. Before and after operation, the carrying angle of both upper extremities (the angle of cubitus valgus was positive, and the angle of cubitus varus was negative) and anteversion angle were measured on X-ray and CT images. At the same time, the flexion and extension range of motion of elbow joint and the external rotation range of motion of upper extremity were measured, and Mayo score was used to evaluate the function of elbow joint. Results: The operation time ranged from 34 to 46 minutes, with an average of 39 minutes. All patients were followed up 5-26 months, with a mean of 14.9 months. All the incisions healed by first intention after the operation; 2 patients had nail path irritation symptoms after Kirschner wire fixation, which improved after dressing change; no complication such as breakage and loosening of internal fixators occurred after regular X-ray review. Continuous callus formed at the osteotomy end at 4 weeks after operation, and the osteotomy end healed at 8-12 weeks after operation. At last follow-up, the carrying angle, anteversion angle, external rotation range of motion, and extension and flexion range of motion of the elbow joint of the affected side significantly improved when compared with preoperative ones ( P<0.05). Except for the extension range of motion of the healthy elbow joint ( P<0.05), there was no significant difference in other indicators between the two sides ( P>0.05). At last follow-up, the Mayo elbow score was 85-100, with an average of 99.3; 22 cases were excellent, 1 case was good, and the excellent and good rate was 100%. Conclusion: Computer-simulated osteotomy based on health-side combined with guide plate technique for treating cubitus varus deformity in adolescents can achieve precise osteotomy, which has the advantages of short operation time and easy operation, and the short-term effectiveness is satisfactory.

A Pediatric Case of Cubitus Varus Deformity due to Olecranon Fracture.

We encountered a pediatric case of cubitus varus deformity with a sheared olecranon fracture in an 8-year-old boy who underwent corrective osteotomy without relevant medical history. The patient fell, resulting in a sheared olecranon fracture. He underwent a closed reduction and casting. As the displacement slightly increased within a week, we followed him without secondary reduction to expect remodeling. No remodeling occurred; corrective osteotomy was performed one-year post-injury for a marked cubitus varus deformity. At 2.5 years after corrective osteotomy, little difference existed in the carrying angle (CA) and varus angulation (VA) of the proximal ulna than that of the contralateral side, without pain or limited range of motion. The acceptable displacement range for pediatric forearm fractures is <1 cm shortening and 15° angular deformation in patients under 10 years old, and 10° angular deformation in older children. Here, the deformity of the ulna in the coronal plane did not remodel. Proximal forearm deformity can be accurately evaluated in flexion contracture elbows by measuring VA. Ulnar osteotomies are commonly performed on Monteggia fractures to reduce the radial head, and the osteotomy site is at the center of the deformity of the diaphysis. Corrective osteotomy for cubitus varus deformity after supracondylar humerus fracture improves function and cosmetic appearance, with good clinical results. In addition, it could prevent cubitus varus deformity from causing posterolateral rotatory instability. The coronal-plane deformity of the proximal ulnar was not expected to remodel. We recommended early accurate reduction and consideration of additional internal fixation for preventing re-displacement. Corrective osteotomy for cubitus varus deformity of the proximal ulna was an effective treatment.

Simultaneous Open Reduction and Corrective Osteotomy for a Child With Lateral Condylar Fracture and Cubitus Varus Deformity Following Supracondylar Fracture: A Case Report.

Posttraumatic cubitus varus deformity in pediatric patients may cause second fractures of the distal humerus. Corrective osteotomy is used to obtain good alignment and is generally performed for patients with prolonged deformity or bony union after fracture. We report the case of a 10-year-old boy who presented with elbow pain after falling. Plain radiography showed lateral condylar fracture and cubitus varus deformity. This injury was the fourth fracture of the same distal humerus. Open reduction and internal fixation for lateral condylar fracture and lateral closing wedge osteotomy for cubitus varus deformity were performed simultaneously. At the last follow-up, one and a half years after operation, plain radiography showed closure of the physis of the distal humerus, and coronal alignment was maintained. The patient was asymptomatic and satisfied with cosmetic issues. There was no fracture after two surgical procedures simultaneously.

Functional outcome of modified French osteotomy fixed with recon-locking compression plate in older children.

INTRODUCTION: Modified French osteotomy is commonly used method for the correction of cubitus varus deformity. Fixation of the osteotomy with figure of 8 wiring or 3.5 mm cortical screws were found to be insufficient in holding the distal fragment in children above 8 years. In this study we used a Reconstruction locking plate for the fixation of osteotomy in those children and evaluated the results. MATERIALS AND METHODS: Modified French osteotomy and fixation with reconstruction locking compression plate was performed for eighteen cases of cubitus varus deformity within the time period of 5 years starting from March 2014 to February 2019. RESULTS: The outcome of the study was assessed with Flynn's criteria, where 12 cases had excellent and 6 cases had good outcome. There were no complications and no revision surgeries were performed. CONCLUSION: Reconstruction locking plate fixation of a modified French osteotomy in older children (above 8 years) provided excellent results in our study.

The lateral curved osteotomy for cubitus varus deformity in children: A case report and literature review.

INTRODUCTION: Cubitus varus deformity after malunited supracondylar humerus fracture has various surgical techniques, implant configurations, and approaches. We describe a combination of French and Dome osteotomy and novel internal fixation technique to deliver an easy, safe, fast and reproducible result based on the current best evidence. PRESENTATION OF CASE: Two cases of malunited supracondylar humerus are described. The first case involves a 3-year-old girl who presented with outstretched and supinated left arm after falling during bike riding 3 weeks earlier. We found no abnormality in radial and median nerve function, but the left arm radiographs showed a callus formation and the early stages of a malunited fracture of the supracondylar humerus. We waited two months for further radiographic evaluation and the radiographs showed the malunited supracondylar humerus with elbow flexion of only 105° and elbow hyperextension of 20°. The cubitus varus was recorded with clinical carrying angle of varus 10°. We used a combination of original French and Dome osteotomy, lateral approach, and our novel fixation technique with excellent results. The second case involved a 8-year-old boy with malunited right elbow and the surgery was done in the same manner, with the result of restoration to normal elbow range of motion. We also assessed the pain score and disabilities of the arm, shoulder and hand (DASH) score and recorded satisfactory results. CONCLUSIONS: The combination of French and Dome osteotomy for treatment of cubitus varus deformity can provide an easy, safe, and reproducible result.

Three-dimensional printing technology for patient-matched instrument in treatment of cubitus varus deformity: A case report.

BACKGROUND: Recently, medical three-dimensional printing technology (3DPT) has demonstrated potential benefits for the treatment of cubitus varus deformity (CVD) by improving accuracy of the osteotomy through the use of an osteotomy guide, with or without a patient-mated plate. Here, we present an interesting CVD case, involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT. CASE SUMMARY: A 32-year-old female presented with a significant CVD from childhood injury. A computer simulation was processed using images from computerized tomography scans of both upper extremities. The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus. Next, the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed. A simulation osteotomy was created for the real-sized bone model, and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy. Our method allowed for successful treatment of the CVD case, significantly improving the patient's radiographic and clinical outcomes, with satisfactory result. CONCLUSION: 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.

[Application of picture archiving and communication systems in lateral wedge osteotomy for cubitus varus deformity in teenagers].

OBJECTIVE: To investigate effectiveness of picture archiving and communication systems (PACS) in lateral wedge osteotomy for cubitus varus deformity in teenagers. METHODS: A clinical data of 16 teenagers with cubitus varus deformity between July 2014 and July 2016 was retrospectively analyzed. All patients were treated with lateral wedge osteotomy and fixed with plate. Before operation, the osteotomy design (the osteotomy angle and length) was done in the PACS, including the carrying angle of healthy limb and the varus angle of affected side. There were 10 males and 6 females, with an average age of 11.4 years (range, 10-17 years). The disease duration ranged from 2 to 10 years (mean, 5.6 years). The preoperative X-ray film showed that the supracondylar fractures of the humerus had all healed, and 9 cases had internal rotation deformity; the varus angle of the affected side was 19.5°-33.5°. After operation, the fracture healing and cubitus varus deformity correction were observed by X-ray films, the elbow function was evaluated by Mayo scoring, and the elbow range of motion was detected. RESULTS: There was no significant difference between the actual intraoperative osteotomy angle and length and the preoperative design ( P>0.05). The hospital stay was 2-8 days, with an average of 4.5 days. No complication such as incision infection or ulnar nerve injury occurred. All 16 cases were followed up 12-18 months, with an average of 14 months. X-ray films showed that the osteotomy healed at 2-7 months after operation, with an average of 2.5 months. The internal fixators were removed within 8-14 months after operation (mean, 12.0 months). X-ray films measurement showed that the carrying angle of the affected side recovered to (10.3±2.0)° at 1 day after operation, which was not significantly different from that of the healthy side [(10.6±1.5)°] before operation ( t=0.480, P=0.637). The carrying angle of the affected side was (9.8±2.6)° at 1 year after operation, which was not significantly different from that of the healthy side [(10.4±1.6)°] at the same time point ( t=0.789, P=0.438). At 1 year after operation, the ranges of flexion and extension of affected side were (131.6±8.4)° and (6.4±2.6)°, respectively; and the ranges of flexion and extension of healthy side were (134.2±6.3)° and (5.9±2.2)°, respectively. There was no significant difference between the healthy and affected sides ( t=1.143, P=0.262; t=0.587, P=0.561). The elbow joint function at 1 year after operation evaluated by Mayo scoring standard rated as excellent in 9 cases, good in 6 cases, and fair in 1 case, and the excellent and good rate was 93.7%. CONCLUSION: Before lateral wedge osteotomy, the PACS is used to design the osteotomy angle and length, which can guide the operation and make the osteotomy more accurate and simple.

Characteristics of Cubitus Varus Deformity after Lateral Condylar Fracture of the Humerus.

Background: Lateral humeral condylar fractures often heal with some residual elbow deformity. However, details of angulation or tilting angle of the lateral condyle after the fracture have not been evaluated so far. Methods: Between 2008 and 2016, we followed up 80 mild fractures of the lateral humeral condyle for more than a year. Thirty fractures were treated by open reduction and internal fixation (ORIF) with Kirschner wires. Fifty cases were treated with a long arm splint for 3 weeks (Fig. 1). The average age of the patients at the time of the injury was 5.5 years. The humerus-elbow-wrist angle (HEWA), Baumann's angle (BA), and tilting angle (TA) were measured on the radiographs. The active range of motion (ROM) was clinically assessed at unaffected and affected sides at the final follow-up. Results: No significant differences were detected between the sides about TA or ROM at the final follow-up. However, HEWA/ BA showed more significant loss of correction. There were significant differences in BA at the affected side between the ORIF and splint groups. Conclusions: Cubitus varus deformity after lateral humeral condylar fracture is not accompanied by a change in TA or ROM, unlike the deformity after supracondylar or distal epiphyseal fracture of the humerus (Fig. 2). Operative treatment to precisely correct and fix the lateral condylar fracture still retained some cubitus varus deformity, although it might lessen or prevent the deformity when compared to conservative treatment with a splint.

Clinical application of individualized 3D-printed navigation template to children with cubitus varus deformity.

BACKGROUND: Cubitus varus deformity is a common sequela of elbow fractures in children. Cubitus varus deformity treatment is tending toward 3D correction, which is challenging for orthopedic surgeons. This study aims to explore whether individualized 3D-printed navigation templates can assist with accurate and effective corrective treatment of children with cubitus varus deformity. METHODS: Thirty-five patients were treated for cubitus varus deformity from June 2015 to April 2017, including 21 boys and 14 girls, aged 4.6-13.2 years (average, 7.5 years). Of these cases, 17 deformities were on the left side and 18 were on the right side. All were treated with wedge osteotomy of the lateral distal humerus. 3D-printed navigation templates were used in 16 cases, while traditional surgery was used in 19 cases. All patients underwent computed tomography scans before surgery. Computer software was used to analyze the measurements and design and print individualized navigation templates. The navigation templates were matched, and surgery was initially simulated. Intraoperative individualized navigation templates were used to assist with accurate osteotomy and Kirschner wire fixation. Operation times were recorded in all cases, the carrying angles before and after surgery were assessed by computer, and postoperative elbow joint function was evaluated using Bellemore criteria. All measurement data were presented as means ± SD, and Student's t test was used to examine differences between groups. All count data between both groups were compared using the chi-square test or Fisher's exact test analysis. RESULTS: All individualized navigation templates matched well with the corresponding anatomical markers and were consistent with preoperative planning, simulated surgery, and intraoperative procedures. Average operation times from clear exposure to fixed Kirschner wire were 11.69 min (9.6-13.5 min) for the individualized navigation template group and 22.89 min (17.7-26.8 min) for the traditional operation group (p < 0.001). Average differences in postoperation carrying angles between affected and healthy sides were 1.13° (0-2.0°) and 4.21° (0-7.5°), respectively (p < 0.001). Follow-up 6-12 months postoperation showed that elbow function did not differ significantly between groups using the Bellemore criteria (p > 0.05). CONCLUSIONS: Individualized navigation templates simplify procedures, reduce operation time, and improve accuracy when used in orthopedic surgery to treat children with cubitus varus deformity.

[Application of three-dimensional navigation template in adult cubitus varus osteotomy].

OBJECTIVE: To investigate the effectiveness of three-dimensional (3D) navigation template in the adult cubitus varus osteotomy. METHODS: Between April 2013 and September 2015, 17 patients with cubitus varus were admitted. There were 6 males and 11 females, aged from 19 to 38 years, with an average age of 26.9 years. There were 10 cases of left elbow joints and 7 cases of right elbow joints. The disease duration was 9-30 years (mean, 18 years). Based on the preoperative X-ray film, the humerus-elbow-wrist (HEW) angle was (-13.2 ±3.3)°, the anteversion angle was (-10.5±2.3)°. The preoperative range of motion (ROM) of flexion was (127.3±7.3)° and ROM of extension was (-10.0±2.5)°. Based on the CT 3D reconstruction, the osteotomy navigation template was designed and printed by 3D printing technique. The cubitus varus osteotomy was assisted by 3D navigation template. The postoperative HEW angle, anteversion angle, and ROMs of the elbow joints of both sides were measured. The elbow function was evaluated based on the Oppenheim elbow function score at 1 year after operation. RESULTS: All cubitus varus osteotomies succeeded with the assist of 3D navigation template. All incisions healed by first intention. All patients were followed up 12-15 months (mean, 13 months). X-ray films showed that all osteotomies healed after 9-12 weeks (mean, 11 weeks). At 1 year after operation, the HEW angle was (9.7±1.9)°, the anteversion angle was (20.7±4.3)°, the ROM was (2.6±3.5)° in extension and (139.2±4.8)° in flexion of affected side. The HEW angle, anteversion angle, and ROMs significantly increased compared with preoperative values ( P<0.05). And there was no significant difference between affected and normal elbow joints ( P>0.05). The elbow functions were excellent in 13 cases and good in 4 cases based on the Oppenheim elbow function score at 1 year after operation. There was no complication such as the nerve injury or osteomyositis of elbow joint during follow-up. CONCLUSION: The 3D navigation template can provide a personalized and precise osteotomy treatment for adult cubitus varus deformity and obtain a satisfactory effectiveness.

Efficacy evaluation of three-dimensional printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity.

BACKGROUND: This present study is aimed to retrospectively assess the efficacy of three-dimensional (3D) printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity. MATERIAL AND METHODS: Twenty-five patients (15 males and 10 females) with the cubitus varus deformity from June 2014 to December 2017 were included in this study and were enrolled into the conventional group (n = 11) and 3D printing group (n = 14) according to the different surgical approaches. The operation time, intraoperative blood loss, osteotomy degrees, osteotomy end union time, and postoperative complications between the two groups were observed and recorded. RESULTS: Compared with the conventional group, the 3D printing group has the advantages of shorter operation time, less intraoperative blood loss, higher rate of excellent correction, and higher rate of the parents' excellent satisfaction with appearance after deformity correction (P < 0.001, P < 0.001, P = 0.019, P = 0.023). Nevertheless, no significant difference was presented in postoperative carrying angle of the deformed side and total complication rate between the two groups (P = 0.626, P = 0.371). CONCLUSIONS: The operation assisted by 3D printing osteotomy guide plate to correct the adolescent cubitus varus deformity is feasible and effective, which might be an optional approach to promote the accurate osteotomy and optimize the efficacy.

Importance of anterior humeral line for successful anatomical reduction in the surgical treatment of pediatric supracondylar humeral fractures.

Anterior humeral line (AHL) and tilting angle (TA) are used for the assessment of pediatric elbow sagittal plane alignment in surgical treatment of pediatric supracondylar humeral fracture. However, few studies exist that compare the reliabilities between these parameters. The purpose of this study is to determine whether measurements of radiographic parameters are reliable and useful for achieving anatomical reduction. In the current study, we demonstrated that the identifying the AHL location involves a simple and reliable measurement compared with TA. The intraoperative AHL identification is a good indicator for achieving anatomical reduction.

Lateral closed wedge osteotomy for cubitus varus deformity.

BACKGROUND: Lateral closed wedge (LCW) osteotomy is a commonly accepted method for the correction of the cubitus varus deformity. The fixation of osteotomy is required to prevent loss of correction achieved. The fixation of the osteotomy by the two screw and figure of eight wire is not stable enough to maintain the correction achieved during surgery. In this prospective study we supplemented the fixation by Kirschner's (K-) wires for stable fixation and evaluated the results. MATERIALS AND METHODS: Twenty-one cases of the cubitus varus deformity following supracondylar fractures of the humerus were operated by LCW osteotomy during February 2001 to June 2006. The mean age of the patients at the time of corrective surgery was 8.5 years (range 6.6-14 years). The osteotomy was fixed by two screws with figure of eight tension band wire between them and the fixation was supplemented by passing two to three K-wires from the lateral condyle engaging the proximal medial cortex through the osteotomy site. RESULT: The mean follow-up period was 2.5 years (range seven months to 3.4 years). The results were assessed as per Morrey criteria. Eighteen cases showed excellent results and three cases showed good results. Two cases had superficial pin tract infection. CONCLUSION: The additional fixation by K wires controls rotational forces effectively besides angulation and translation forces and maintains the correction achieved peroperatively.