Bifunctional green nanoferrites as catalysts for simultaneous organic pollutants reduction and hydrogen generation: Upcycling strategy.

The upcycling strategy is an approach that includes the conversion of waste into new higher value-added products. This study reports on a new methodology for the environmentally friendly synthesis of MFe2O4 spinel nanoferrites (M = Co, Cu, Fe and Mn) to be used as catalysts applied in the upcycling method. Thus, the reduction of 4-nitrophenol (4-NP), methyl orange, and methyl red to commercially valuable compounds was evaluated, as well as the simultaneous generation of hydrogen in a short time. Therefore, an eco-friendly synthesis was proposed, according to the 12 principles of green chemistry and sustainability. Product were obtained with satisfactory properties in terms of crystallinity, magnetic particle size, and magnetization. The materials exhibited excellent performance in catalytic reduction of 4-NP, whose reduction time decreased in the order MnFe2O4 > Fe3O4 > CoFe2O4 > CuFe2O4. This behavior highlighted the CuFe2O4 nanoferrite, which achieved 4-NP reduction in just 10 s. It proved that it could also be reused for 10 consecutive cycles while maintaining its crystalline structure. The catalyst was also effective in the reduction of azo dyes and subsequent production of substituted aromatic compounds suitable for use in chemical processes. Under the optimized conditions, the green CuFe2O4 catalyst was effective in producing hydrogen by hydrolysis. HGR and activation energy (Ea) values were of the order of 19,600 mL g-1 min-1 and 25.5 kJ mol-1, respectively. The results demonstrated the potential of this simple strategy for the environmental pollutant elimination and power generation.

Emulsion Liquid Membranes Based on Os-NP/n-Decanol or n-Dodecanol Nanodispersions for p-Nitrophenol Reduction.

Membrane materials with osmium nanoparticles have been recently reported for bulk membranes and supported composite membrane systems. In the present paper, a catalytic material based on osmium dispersed in n-decanol (nD) or n-dodecanol (nDD) is presented, which also works as an emulsion membrane. The hydrogenation of p-nitrophenol (PNP) is carried out in a reaction and separation column in which an emulsion in the acid-receiving phase is dispersed in an osmium nanodispersion in n-alcohols. The variables of the PNP conversion process and p-aminophenol (PAP) transport are as follows: the nature of the membrane alcohol, the flow regime, the pH difference between the source and receiving phases and the number of operating cycles. The conversion results are in all cases better for nD than nDD. The counter-current flow regime is superior to the co-current flow. Increasing the pH difference between the source and receiving phases amplifies the process. The number of operating cycles is limited to five, after which the regeneration of the membrane dispersion is required. The apparent catalytic rate constant (kapp) of the new catalytic material based on the emulsion membrane with the nanodispersion of osmium nanoparticles (0.1 × 10-3 s-1 for n-dodecanol and 0.9 × 10-3 s-1 for n-decanol) is lower by an order of magnitude compared to those based on adsorption on catalysts from the platinum metal group. The advantage of the tested membrane catalytic material is that it extracts p-aminophenol in the acid-receiving phase.

Effect of pH on the ozonolysis degradation of p-nitrophenol in aquatic environment and the synergistic effect of hydroxy radical.

Density functional theory (DFT) was employed to elucidate the mechanisms for ozonolysis reaction of p-nitrophenol (PNP) and its anion form aPNP. Thermodynamic data, coupled with Average Local Ionization Energies (ALIE) analysis, reveal that the ortho-positions of the OH/O- groups are the most favorable reaction sites. Moreover, rate constant calculations demonstrate that the O3 attack on the C2-C3 bond is the predominant process in the reaction between neutral PNP and O3. For the aPNP + O3 reaction, the most favorable pathways involve O3 attacking the C1-C2 and C6-C1 bonds. The rate constant for PNP ozonolysis positively correlates with pH, ranging from 5.47 × 108 to 2.86 × 109 M-1 s-1 in the natural aquatic environment. In addition, the formation of hydroxyl radicals in the ozonation process of PNP and the mechanisms of its synergistic reaction of PNP with ozone were investigated. Furthermore, the ozonation and hydroxylation processes involving the intermediate OH-derivatives were both thermodynamically and kinetic analyzed, which illustrate that OH radicals could promote the elimination of PNP. Finally, the toxic of PNP and the main products for fish, daphnia, green algae and rat were assessed. The findings reveal that certain intermediates possess greater toxicity than the original reactant. Consequently, the potential health risks these compounds pose to organisms warrant serious consideration.

A MOF@Metal Oxide Heterostructure Induced by Post-Synthetic Gamma-Ray Irradiation for Catalytic Reduction.

Metal-organic framework (MOF) based heterostructures, which exhibit enhanced or unexpected functionality and properties due to synergistic effects, are typically synthesized using post-synthetic strategies. However, several reported post-synthetic strategies remain unsatisfactory, considering issues such as damage to the crystallinity of MOFs, presence of impure phases, and high time and energy consumption. In this work, we demonstrate for the first time a novel route for constructing MOF based heterostructures using radiation-induced post-synthesis, highlighting the merits of convenience, ambient conditions, large-scale production, and notable time and energy saving. Specifically, a new HKUST-1@Cu2O heterostructure was successfully synthesized by simply irradiating a methanol solution dispersed of HKUST-1 with gamma ray under ambient conditions. The copper source of Cu2O was directly derived from in situ radiation etching and reduction of the parent HKUST-1, without the use of any additional copper reagents. Significantly, the resulting HKUST-1@Cu2O heterostructure exhibits remarkable catalytic performance, with a catalytic rate constant nearly two orders of magnitude higher than that of the parent HKUST-1.

Fluorescence Sensing of pH and p-Nitrophenol Using an AIEE Active Pyridoxal Derived Schiff Base.

An easy-to-prepare aggregation-induced emission enhancement (AIEE) active Schiff base NPY was synthesized by condensing vitamin B6 cofactor pyridoxal with 3-hydroxy-2-naphthoic hydrazide, and employed for the fluorescent sensing of pH and p-nitrophenol (p-NP). The AIEE phenomenon of NPY was investigated in mixed DMSO/H2O medium. The weakly yellow-fluorescent NPY (λem = 535 nm) in pure DMSO turned to a bright cyan-fluorescent NPY (λem = 490 nm) upon addition of poor solvent water. The DLS and SEM analyses supported the self-aggregation of NPY that restricted the intramolecular rotation and activated the excited state intramolecular proton transfer (ESIPT) process. The AIEE luminogen (AIEEgen) NPY containing 90% of water fraction (fwater) was employed for the fluorescent sensing of pH. AIEEgen NPY displays three distinct fluorescent pH windows: non-fluorescent below pH 3.0 and above pH 10.0, cyan fluorescent between pH 3.0 to 8.0, and yellow fluorescent between pH 8.0 to 10.0. AIEEgen NPY was also applied for the detection of nitroaromatics in HEPES buffer (10% DMSO, 10 mM, pH 7.0). The addition of p-NP selectively quenched the fluorescent intensity of AIEEgen NPY with an estimated detection limit of 1.73 µM. The analytical utility of AIEEgen NPY was examined by quantifying p-NP in different real water samples.

Detoxification of p-nitrophenol (PNP) using Enterococcus gallinarum JT-02 isolated from animal farm waste sludge.

Enterococcus gallinarum (JT-02) isolated and identified from the animal farm waste sludge was found to be capable of biodegrading p-nitrophenol (PNP), an organic compound used to manufacture drugs, fungicides, insecticides, dyes, and to darken leather. The intention of this study was to optimize the biodegradation by finding the optimal conditions for the specific strain through single-factor experiments. The bacterial strain was grown in Luria Bertani broth and various parameters were optimized to achieve the prime settings for the p-nitrophenol (PNP) biodegradation. The results indicated that the best setups for the biodegradation by the strain JT-02 was 100 mg/L of PNP; pH 7; 30 °C; 150 rpm in a shaker incubator and 3% (v/v) of inoculum dose. Once the optimal conditions were found, the bacteria were capable of degrading p-nitrophenol (98.21%) in 4 days. Intermediates produced during PNP biodegradation were identified using High Performance Liquid Chromatography (HPLC) analysis and the biodegradation pathway was elucidated. Phytotoxicity studies were carried out with Vigna radiata seeds to confirm the applicability and efficiency of PNP biodegradation.

Tree shrew cytochrome P450 2E1 is a functional enzyme that metabolises chlorzoxazone and p-nitrophenol.

Cytochromes P450 (CYPs or P450s) are important enzymes for drug metabolism. Tree shrews are non-primate animal species used in various fields of biomedical research, including infection (especially hepatitis viruses), depression, and myopia. A recent tree shrew genome analysis indicated that the sequences and the numbers of P450 genes are similar to those of humans; however, P450s have not been adequately identified and analysed in this species.In this study, a novel CYP2E1 was isolated from tree shrew liver and was characterised in comparison with human, dog, and pig CYP2E1. Tree shrew CYP2E1 and human CYP2E1 showed high amino acid sequence identity (83%) and were closely related in a phylogenetic tree.Gene and genome structures of CYP2E1 were generally similar in humans, dogs, pigs, and tree shrews. Tissue expression patterns showed that tree shrew CYP2E1 mRNA was predominantly expressed in liver, just as for dog and pig CYP2E1 mRNAs. In tree shrews, recombinant CYP2E1 protein and liver microsomes metabolised chlorzoxazone and p-nitrophenol, probe substrates of human CYP2E1, just as they do in dogs and pigs.These results suggest that tree shrew CYP2E1 encodes a functional drug-metabolising enzyme that plays a role in the liver, similar to human CYP2E1.

Synthesis of Nitrogen and Phosphorus/Sulfur Co-Doped Carbon Xerogels for the Efficient Electrocatalytic Reduction of p-Nitrophenol.

Carbon xerogels co-doped with nitrogen (N) and phosphorus (P) or sulfur (S) were synthesized and employed as catalysts for the electrocatalytic reduction of p-nitrophenol (p-NP). The materials were prepared by first synthesizing N-doped carbon xerogels (NDCX) via the pyrolysis of organic gels, and then introducing P or S atoms to the NDCX by a vapor deposition method. The materials were characterized by various measurements including X-ray diffraction, N2 physisorption, Transmission electron microscopy, Fourier Infrared spectrometer, and X-ray photoelectron spectra, which showed that N atoms were successfully doped to the carbon xerogels, and the co-doping of P or S atoms affected the existing status of N atoms. Cyclic voltammetry (CV) scanning manifested that the N and P co-doped materials, i.e., P-NDCX-1.0, was the most suitable catalyst for the reaction, showing an overpotential of -0.569 V (vs. Ag/AgCl) and a peak slop of 695.90 µA/V. The material was also stable in the reaction and only a 14 mV shift in the reduction peak overpotential was observed after running for 100 cycles.

Degradation of p-Nitrophenol by activated persulfate with carbon-based materials.

The removal of p-nitrophenol (PNP) from wastewater was evaluated by the activated persulfate process using different materials - carbon xerogels (XG), carbon nanotubes (CNT), and activated carbon (AC) -, and also using such materials doped with nitrogen (XGM, CNTM and ACM). These carbon materials were impregnated with 2 wt.% of iron and tested in the oxidative process to assess the influence of their textural and surface chemical properties. The carbon-based materials' properties influence the efficiencies of the adsorption and oxidative processes; in adsorption, the materials with higher specific surface areas (SBET), i.e. AC (824 m2/g) and Fe/AC (807 m2/g), have shown to be the most promising (having achieved a PNP removal of about 20%); on the other hand, in the activated persulfate process the carbon or iron-containing carbon materials with the highest mesoporous areas (Smeso) were the preferential ones - XG and Fe/XG, respectively - reaching removals of 47.3% and 75.7% for PNP and 44.9 and 63.3% for TOC, respectively. Moreover, the presence of nitrogen groups on the samples' surface benefits both processes, being found that PNP degradation and mineralization increase with the nitrogen content. The stability of the best materials (XGM and Fe/XGM) was evaluated during four cycles, being noticed that while XGM lost catalytic activity, the Fe/XGM sample remained stable without leaching of iron. The quantification of intermediate compounds formed during persulfate oxidation was performed, and only oxalic acid was detected, in addition to PNP, being that their contribution to the TOC measured was higher than 99%. Experiments carried out in the presence of radical scavengers proved that only the sulfate radical is present under the acidic conditions used. Complete PNP oxidation and TOC removal of ∼96% were reached for the activated persulfate process, proving to be more attractive than the Fenton one.

Removal of p-Nitrophenol by Adsorption with 2-Phenylimidazole-Modified ZIF-8.

Petrochemical wastewater contains p-nitrophenol, a highly toxic, bioaccumulative and persistent pollutant that can harm ecosystems and environmental sustainability. In this study, ZIF-8-PhIm was prepared for p-nitrophenol removal from petrochemical wastewater using solvent-assisted ligand exchange (SALE) with 2-phenylimidazole(2-PhIm). The ZIF-8-PhIm's composition and structure were characterised using the XRD, SEM, FT-IR, 1H NMR, XPS and BET methods. The adsorption effect of ZIF-8-PhIm on p-nitrophenol was investigated with the static adsorption method. Compared to the ZIF-8 materials, ZIF-8-PhIm exhibited stronger π-π interactions, produced a multistage pore structure with larger pore capacity and size, and had increased hydrophilicity and exposure of adsorption sites. Under optimised conditions (dose = 0.4 g/L, T = 298 K, C0 = 400 mg/L), ZIF-8-PhIm achieved an adsorption amount of 828.29 mg/g, which had a greater p-nitrophenol adsorption capacity compared to the ZIF-8 material. The Langmuir isotherm and pseudo-second-order kinetic models appropriately described the p-nitrophenol adsorption of ZIF-8-PhIm. Hydrogen bonding and π-π interactions dominated the p-nitrophenol adsorption of ZIF-8-PhIm. It also had relatively good regeneration properties.

Influence of Co3O4 Nanostructure Morphology on the Catalytic Degradation of p-Nitrophenol.

The design and fabrication of nanomaterials with controllable morphology and size is of critical importance to achieve excellent catalytic performance in heterogeneous catalysis. In this work, cobalt oxide (Co3O4) nanostructures with different morphologies (nanoplates, microflowers, nanorods and nanocubes) were successfully constructed in order to establish the morphology-property-performance relationship of the catalysts. The morphology and structure of the nanostructured Co3O4 were characterized by various techniques, and the catalytic performance of the as-prepared nanostructures was studied by monitoring the reduction of p-nitrophenol to p-aminophenol in the presence of excess NaBH4. The catalytic performance was found to be strongly dependent on their morphologies. The experimental results show that the pseudo-first-order reaction rate constants for Co3O4 nanostructures with various shapes are, respectively, 1.49 min-1 (nanoplates), 1.40 min-1 (microflowers), 0.78 min-1 (nanorods) and 0.23 min-1 (nanocubes). The Co3O4 nanoplates exhibited the highest catalytic activity among the four nanostructures, due to their largest specific surface area, relatively high total pore volume, best redox properties and abundance of defect sites. The established correlation between morphology, property and catalytic performance in this work will offer valuable insight into the design and application of nanostructured Co3O4 as a potential non-noble metal catalyst for p-nitrophenol reduction.

Removal of p-Nitrophenol from simulated sewage using steel slag: Capability and mechanism.

The steel slag was investigated for the removal of p-nitrophenol (4-NP) from simulated sewage by batch adsorption and fixed-bed column absorption experiments. The results showed that the maximum adsorption capacity was 109.66 mg/g at 298 K, pH of 7, initial concentration 100 mg/L, and dose 0.8 g/L. The adsorption process fitted the Langmuir isothermal adsorption model and followed pseudo-second-order kinetic models, the activation energy of adsorption (Ea) was 10.78 kJ/mol, which indicated that the adsorption was single-molecule layer physical adsorption. The regeneration efficiency was still maintained at 84.20% after five adsorption-desorption cycles. The column adsorption experiments showed that the adsorption capacity of the Thomas model reached 13.69 mg/g and the semi-penetrating time of the Yoon-Nelson model was 205 min at 298 K. Fe3O4 was identified as the main adsorption site by adsorption energy calculation, XRD and XPS analysis. The FT-IR, Zeta potential, and ionic strength analysis indicated that the adsorption mechanism was hydrogen bonding interaction and electrostatic interaction. This work proved that steel slag could be utilized as a potential adsorbent for phenol-containing wastewater treatment.

Nickel/nitrogen-doped carbon nanocomposites: Synthesis and electrochemical sensor for determination of p-nitrophenol in local environment.

A novel electrochemical sensor was prepared using N-doped carbon mesoporous materials supported with nickel nanoparticles (Ni-NCs) for environmental p-nitrophenol (p-NP) detection in a specific geographical area. These as-prepared Ni-NCs were dispersed in polyethyleneimine (PEI) solution and modified onto a glassy carbon electrode (GCE) for electrocatalytic reduction of p-NP. The Ni-NCs-PEI/GCE showed a high Faraday current at -0.302 V during p-NP reduction, because of the synergistic effect between Ni-NCs and PEI. Under ideal conditions, the Ni-NCs-PEI/GCE was used in the voltametric determination of p-NP, with high sensitivity. The linear ranges for p-NP are 0.06-10 µM and 10-100 µM with low detection limit (4.0 nM) and high sensitivity (1.465 µA µM-1 cm-2). In the presence of other phenolic compounds, this sensor showed good selectivity for p-NP detection. The Ni-NCs-PEI/GCE was also used to determine p-NP in environmental water samples of a specific geographical area, with recoveries ranging from 95.9% to 109.4%, and an RSD of less than 3.6%. Therefore, this novel Ni-NCs-PEI/GCE provides a good example for the design of other carbon-based nanocomposite materials, for electrochemical detection of trace p-NP in a specific geographical area.

Visible-light-driven photodegradation of organic pollutants by simply exfoliated kaolinite nanolayers with enhanced activity and recyclability.

The need for abundant photocatalyst in wastewater treatment is currently a must. A simple intercalation process was utilized to exfoliate Kaolinite clay mineral structure Al2Si2O5(OH)4 into two-dimensional nanostructured separated layers operated in visible light range. The intercalating agents were hydrazine hydrate and urea. Detailed characterization confirmed the nanolayered structures of kaolinite hexagonal nanosheets (NK). In addition, Bandgap energy was reduced based on intercalating agents from 3.45 to 2.48 eV as revealed by light absorption spectra. The quenching of PL spectra for the nK has also been ascribed to the suppression of charge carrier recombination. The exfoliated nK was utilized to photodegrade Rhodamine B dye (RhB) and P-nitrophenol (PNP) as industrial pollutants in wastewater. The results showed 92.3% and 99.7% photodegradation of RhB and PNP within 180 min of visible-light irradiation utilizing the exfoliated NK by urea. We denote the boosted photocatalytic performance of this NK to the uncovered, low bandgap metal oxide inclusions on the exterior of NK besides the nitrogen doping due to exfoliation with urea. This simple exfoliation has modified abundant and stable clay nanolayers that are a promising alternative for the eminent nanostructured oxide photocatalysts to overcome the organic pollutants in wastewater at a high scale.

Proteomic analysis of Burkholderia zhejiangensis CEIB S4-3 during the methyl parathion degradation process.

Methyl parathion is an organophosphorus pesticide widely employed worldwide to control pests in agricultural and domestic environments. However, due to its intensive use, high toxicity, and environmental persistence, methyl parathion is recognized as an important ecosystem and human health threat, causing severe environmental pollution events and numerous human poisoning and deaths each year. Therefore, identifying and characterizing microorganisms capable of fully degrading methyl parathion and its degradation metabolites is a crucial environmental task for the bioremediation of pesticide-polluted sites. Burkholderia zhejiangensis CEIB S4-3 is a bacterial strain isolated from agricultural soils capable of immediately hydrolyzing methyl parathion at a concentration of 50 mg/L and degrading the 100% of the released p-nitrophenol in a 12-hour lapse when cultured in minimal salt medium. In this study, a comparative proteomic analysis was conducted in the presence and absence of methyl parathion to evaluate the biological mechanisms implicated in the methyl parathion biodegradation and resistance by the strain B. zhejiangensis CEIB S4-3. In each treatment, the changes in the protein expression patterns were evaluated at three sampling times, zero, three, and nine hours through the use of two-dimensional polyacrylamide gel electrophoresis (2D-PAGE), and the differentially expressed proteins were identified by mass spectrometry (MALDI-TOF). The proteomic analysis allowed the identification of 72 proteins with differential expression, 35 proteins in the absence of the pesticide, and 37 proteins in the experimental condition in the presence of methyl parathion. The identified proteins are involved in different metabolic processes such as the carbohydrate and amino acids metabolism, carbon metabolism and energy production, fatty acids ß-oxidation, and the aromatic compounds catabolism, including enzymes of the both p-nitrophenol degradation pathways (Hydroquinone dioxygenase and Hydroxyquinol 1,2 dioxygenase), as well as the overexpression of proteins implicated in cellular damage defense mechanisms such as the response and protection of the oxidative stress, reactive oxygen species defense, detoxification of xenobiotics, and DNA repair processes. According to these data, B. zhejiangensis CEIB S4-3 overexpress different proteins related to aromatic compounds catabolism and with the p-nitrophenol  degradation pathways, the higher expression levels observed in the two subunits of the enzyme Hydroquinone dioxygenase, suggest a preferential use of the Hydroquinone metabolic pathway in the p-nitrophenol degradation process. Moreover the overexpression of several proteins implicated in the oxidative stress response, xenobiotics detoxification, and DNA damage repair reveals the mechanisms employed by B. zhejiangensis CEIB S4-3 to counteract the adverse effects caused by the methyl parathion and p-nitrophenol exposure.

Iodine/iodide-doped polymeric nanospheres for simultaneous voltammetric detection of p-aminophenol, phenol, and p-nitrophenol.

A sensor was developed for the first time based on polydopamine nanospheres doped with I2, I-, and IO3- species (PDA-Iodine), to determine the concentration of p-aminophenol (p-AP), phenol (Ph), and p-nitrophenol (p-NP) simultaneously. These polymeric nanospheres were successfully characterized using a variety of techniques including field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared, Raman spectroscopy, and X-ray diffraction analysis. A carbon paste electrode was modified with the PDA-Iodine (CPE/PDA-Iodine). Because of the electrocatalytic activity of DA/DQ, I2 and I- species (in the structure of PDA-Iodine), CPE/PDA-Iodine shows enhancement in the electrooxidation peak currents as well as slight negative shift in peak potentials of p-AP, Ph, and p-NP compared with a bare carbon paste electrode. Under optimal experimental conditions, the linear calibration plots are linear in the ranges 0.5-120 µM for p-AP, 0.7-120 µM for Ph, and 1.0-100 µM for p-NP with limits of detection of 30, 40, and 80 nM for p-AP, Ph, and p-NP, respectively (S/N = 3). To prove the performance of the method, the repeatability of the signals of CPE/PDA-Iodine was evaluated and the RSD values obtained were 2.9%, 3.2%, and 3.1% for p-AP (45 µM), Ph (40 µM), and p-NP (40 µM), respectively. The CPE/PDA-Iodine is a promising new sensor for sensing p-AP, Ph, and p-NP simultaneously in tap and river water sample and the values of recoveries for spiked samples were in the range 94.0-104.4%.

Long-acting CoAl2O4 spinel catalyst developed on activated alumina pellets by facile synthesis to activate peroxymonosulfate: Controllable cobalt leaching and environmental adaptability.

A novel composite catalyst prepared by fixing cobalt aluminate (CoAl2O4) spinel on formed alumina carrier by impregnation-calcination route is reported, which can be used to efficiently activate peroxymonosulfate (PMS) to degrade p-nitrophenol (PNP). The internal laws of phase composition and preparation conditions are explored in detail, and the results show that the introduction of additional aluminum ions in the preparation process changes the coordination environment and the electronic state of cobalt ions, which leads to the transformation of spinel/inverted spinel in the composition, and further affects the activity and stability of the catalyst. The selected CoAl-Aaps-600 catalyst has high CoAl2O4 content, showing good cycle performance and low cobalt leaching, and has great catalytic degradation performance at different temperatures and a wide pH range. Most notably, a fixed bed reactor packed with 20 g of CoAl-Aaps-600 exhibits excellent capacity to continuously treat 60 L of PNP solution with acceptable PNP removal ratio and low cobalt leaching content. Sulfate radical and singlet oxygen are identified as the main reactive oxygen species produced in CoAl-Aaps-600/PMS system, and the reaction mechanism is reasonably inferred. This work provides a potential application material and process for the treatment of continuous organic wastewater.

Nickel on Oxidatively Modified Carbon as a Promising Cost-Efficient Catalyst for Reduction of P-Nitrophenol.

The reduction of p-nitrophenol to p-aminophenol has become a benchmark reaction for testing the efficiency of new catalytic systems. In this study, we use oxidatively modified carbon (OMC) as a structural support to develop a new cost-efficient nickel-based catalytic system. The newly developed material comprises single nickel ions, chemically bound to the oxygen functional groups on the OMC surface. The highly oxidized character of OMC ensures the high lateral density of nickel ions on its surface at relatively low nickel content. We demonstrate excellent catalytic properties of the new material by using it as a stationary phase in a prototype of a continuous flow reactor: the reagent fed into the reactor is p-nitrophenol, and the product, exiting the reactor, is the fully converted p-aminophenol. The catalytic properties of the new catalyst are associated with its specific morphology, and with high lateral density of active sites on the surface. The reaction can be considered as an example of single-atom catalysis. The resulting material can be used as an inexpensive but efficient catalyst for industrial wastewater treatment. The study opens the doors for the synthesis of a new series of catalytic systems comprising transition metal atoms on the OMC structural support.

Simultaneous removal of Zn2+ and p-nitrophenol from wastewater using nanocomposites of montmorillonite with alkyl-ammonium and complexant.

Three types of alkyl-ammonium with different branching chains and three complexants with different functional groups were used to prepare alkyl-ammonium or complexant intercalated montmorillonite nanocomposite (A-Mt or C-Mt). In addition, synergistic intercalated montmorillonite nanocomposites (A/C-Mt) with alkyl-ammonium along with complexant were also prepared. The adsorption performance of the various nanocomposites toward Zn2+ and p-nitrophenol (PNP) from simulated binary wastewater containing both Zn2+ and PNP were systematically investigated. Characterization of Mt nanocomposites showed that both alkyl-ammoniums and complexants were successfully intercalated into the interlayers of Mt. The surfactant loading amounts of the various nanocomposites were also determined and correlated with the resulting expansion of the interlayer spacing. It was found that intercalation of alkane (OTAC) and -SH (CSH) were conducive to the adsorption of Zn2+ while -C2H4NH (TETA) and all alkyl-ammoniums were beneficial for PNP adsorption. The extent of adsorption was found to be controlled primarily by pH, i.e., the higher pH had a good effect on the adsorption of both Zn2+ and PNP. The adsorption process of Zn2+ onto Mt nanocomposites was more in line with the Freundlich model (R2 = 0.99), while the Langmuir model described the adsorption of PNP well (R2 = 0.99). The adsorption kinetics could be well described by the Elovich equation (R2 = 0.98) and the double-constant model (R2 = 0.89). Chemical adsorption was determined to be the dominant process between the contaminant and Mt nanocomposite surfaces.

Novel SnO2@ZIF-8/gC3N4 nanohybrids for excellent electrochemical performance towards sensing of p-nitrophenol.

Herein, a novel synthetic strategy has been proposed to prepare engineered SnO2@ZIF-8/gC3N4 nanohybrids for electrochemical sensing of p-nitrophenol (p-NP). The electrochemical properties were investigated using cyclic voltammetry (CV), chronoamperometry (CA), and differential pulse voltammetry (DPV). The developed nanohybrid sensor displayed an excellent electrochemical performance towards sensing of p-NP with a detection limit of 0.565 µM. The sensitivity of the prepared nanohybrid was found to be 2.63 µAcm-2µM-1. Moreover, the newly fabricated sensor exhibited remarkable selectivity (over tenfold excess) in the presence of common interferents. The simultaneous detection of isomers of nitrophenol is difficult using the developed sensor. However, other common interferents, such as phenol and aminophenol have negligible effects on the sensitivity of SnO2@ZIF-8/gC3N4 towards the detection of p-nitrophenol. Further, the newly developed sensor showed consistency of sensing response up to 30 days. Thus, implementation of SnO2@ZIF-8/gC3N4 nanohybrids as a p-NP electrochemical sensor offers the advantages of simplicity, selectivity, and stability.