Moving forward to understand the alteration of physiological mechanism by seed priming with different halo-agents under salt stress.

Soil salinity hampers the survival and productivity of crops. To minimize salt-associated damages in plant, better salt management practices in agriculture have become a prerequisite. Seed priming with different halo-agents is a technique, which improves the primed plant's endurance to tackle sodium. Salt tolerance is achieved in tolerant plants through fundamental physiological mechanisms- ion-exclusion and tissue tolerance, and salt-tolerant plants may (Na+ accumulators) or may not (Na+ excluders) allow sodium movement to leaves. While Na+ excluders depend on ion exclusion in roots, Na+ accumulators are proficient Na+ managers that can compartmentalize Na+ in leaves and use them beneficially as inexpensive osmoticum. Salt-sensitive plants are Na+ accumulators, but their inherent tissue tolerance ability and ion-exclusion process are insufficient for tolerance. Seed priming with different halo-agents aids in 'rewiring' of the salt tolerance mechanisms of plants. The resetting of the salt tolerance mechanism is not universal for every halo-agent and might vary with halo-agents. Here, we review the physiological mechanisms that different halo-agents target to confer enhanced salt tolerance in primed plants. Calcium and potassium-specific halo-agents trigger Na+ exclusion in roots, thus ensuring a low amount of Na+ in leaves. In contrast, Na+-specific priming agents favour processes for Na+ inclusion in leaves, improve plant tissue tolerance or vacuolar sequestration, and provide the greatest benefit to salt-sensitive and sodium accumulating plants. Overall, this review will help to understand the underlying mechanism behind plant's inherent nature towards salt management and its amelioration with different halo-agents, which helps to optimize crop stress performance.

Consequences of 33 Years of Plastic Film Mulching and Nitrogen Fertilization on Maize Growth and Soil Quality.

Plastic film mulching and urea nitrogen fertilization are widely used in agricultural ecosystems, but both their long-term use may leave a negative legacy on crop growth, due to deleterious effects of plastic and microplastic accumulation and acidification in soil, respectively. Here, we stopped covering soil with a plastic film in an experimental site that was previously covered for 33 years and compared soil properties and subsequent maize growth and yield between plots that were previously and never covered with the plastic film. Soil moisture was about 5-16% higher at the previously mulched plot than at the never-mulched plot, but NO3- content was lower for the former when with fertilization. Maize growth and yield were generally similar between previously and never-mulched plots. Maize had an earlier dough stage (6-10 days) in previously mulched compared to never-mulched plots. Although plastic film mulching did add substantial amounts of film residues and microplastic accumulation into soils, it did not leave a net negative legacy (given the positive effects of the mulching practice in the first place) for soil quality and subsequent maize growth and yield, at least as an initial effect in our experiment. Long-term urea fertilization resulted in a pH decrease of about 1 unit, which bring a temporary maize P deficiency occurring in early stages of growth. Our data add long-term information on this important form of plastic pollution in agricultural systems.

A trait-environment relationship approach to participatory plant breeding for organic agriculture.

The extent of intraspecific variation in trait-environment relationships is an open question with limited empirical support in crops. In organic agriculture, with high environmental heterogeneity, this knowledge could guide breeding programs to optimize crop attributes. We propose a three-dimensional framework involving crop performance, crop traits, and environmental axes to uncover the multidimensionality of trait-environment relationships within a crop. We modeled instantaneous photosynthesis (Asat ) and water-use efficiency (WUE) as functions of four phenotypic traits, three soil variables, five carrot (Daucus carota) varieties, and their interactions in a national participatory plant breeding program involving a suite of farms across Canada. We used these interactions to describe the resulting 12 trait-environment relationships across varieties. We found one significant trait-environment relationship for Asat (taproot tissue density-soil phosphorus), which was consistent across varieties. For WUE, we found that three relationships (petiole diameter-soil nitrogen, petiole diameter-soil phosphorus, and leaf area-soil phosphorus) varied significantly across varieties. As a result, WUE was maximized by different combinations of trait values and soil conditions depending on the variety. Our three-dimensional framework supports the identification of functional traits behind the differential responses of crop varieties to environmental variation and thus guides breeding programs to optimize crop attributes from an eco-evolutionary perspective.

Growth and Physiological Characteristics of Strawberry Plants Cultivated under Greenhouse-Integrated Semi-Transparent Photovoltaics.

The integration of semi-transparent photovoltaics into the roof of greenhouses is an emerging technique used in recent years, due to the simultaneous energy and food production from the same piece of land. Although shading in many cases is a solution to maintain the desired microclimate, in the case of photovoltaic installations, the permanent shading of the crop is a challenge, due to the importance of light to the growth, morphogenesis, and other critical physiological processes. In this study, the effect of shade from semi-transparent photovoltaics on a strawberry crop (Fragaria x ananassa Duch.) was examined, in terms of growth and quality (phenolic and flavonoid concentration of fruits). According to the results, in non-shaded plants, there was a trend of larger plants, but without a significant change in leaf number, while the total number of flowers was slightly higher at the end of the cultivation period. Moreover, it was found that the percentage change between the number of ripe fruits was smaller than that of the corresponding change in fruit weight, implying the increased size of the fruits in non-shaded plants. Finally, regarding the antioxidant capacity, it was clearly demonstrated that shading increased the total phenolic content, as well as the free-radical-scavenging activity of the harvested fruits. Although the shading from the semi-transparent photovoltaics did not assist the production of large fruits, it did not affect their number and increased some of their quality characteristics. In addition, the advantageous impact of the semi-transparent photovoltaics in the energy part must not be neglected.

Biostimulatory Effects of Chlorella fusca CHK0059 on Plant Growth and Fruit Quality of Strawberry.

Green algae have been receiving widespread attention for their use as biofertilizers for agricultural production, but more studies are required to increase the efficiency of their use. This study aimed to investigate the effects of different levels of Chlorella fusca CHK0059 application on strawberry plant growth and fruit quality. A total of 800 strawberry seedlings were planted in a greenhouse and were grown for seven months under different Chlorella application rates: 0 (control), 0.1, 0.2, and 0.4% of the optimal cell density (OCD; 1.0 × 107 cells mL-1). The Chlorella application was conducted weekly via an irrigation system, and the characteristics of fruit samples were monitored monthly over a period of five months. The growth (e.g., phenotype, dry weight, and nutrition) and physiological (e.g., Fv/Fm and chlorophylls) parameters of strawberry plants appeared to be enhanced by Chlorella application over time, an enhancement which became greater as the application rate increased. Likewise, the hardness and P content of strawberry fruits had a similar trend. Meanwhile, 0.2% OCD treatment induced the highest values of soluble solid content (9.3-12 °Brix) and sucrose content (2.06-2.97 g 100 g-1) in the fruits as well as fruit flavor quality indices (e.g., sugars:acids ratio and sweetness index) during the monitoring, whilst control treatment represented the lowest values. In addition, the highest anthocyanin content in fruits was observed in 0.4% OCD treatment, which induced the lowest incidence of grey mold disease (Botrytis cinerea) on postharvest fruits for 45 days. Moreover, a high correlation between plants' nutrients and photosynthetic variables and fruits' sucrose and anthocyanin contents was identified through the results of principal component analysis. Overall, C. fusca CHK0059 application was found to promote the overall growth and performance of strawberry plants, contributing to the improvement of strawberry quality and yield, especially in 0.2% OCD treatment.

Almond Tree Adaptation to Water Stress: Differences in Physiological Performance and Yield Responses among Four Cultivar Grown in Mediterranean Environment.

Maximizing water use efficiency, yield, and plant survival under drought is a relevant research issue for almond-tree-growing areas worldwide. The intraspecific diversity of this species may constitute a valuable resource to address the resilience and productivity challenges that climate change poses to crop sustainability. A comparative evaluation of physiological and productive performance of four almond varieties: 'Arrubia', 'Cossu', 'Texas', and 'Tuono', field-grown in Sardinia, Italy, was performed. A great variability in the plasticity to cope with soil water scarcity and a diverse capacity to adapt to drought and heat stresses during fruit development were highlighted. The two Sardinian varieties, Arrubia and Cossu, showed differences in water stress tolerance, photosynthetic and photochemical activity, and crop yield. 'Arrubia' and 'Texas' showed greater physiological acclimation to water stress while maintaining higher yields, as compared to the self-fertile 'Tuono'. The important role of crop load and specific anatomical traits affecting leaf hydraulic conductance and leaf gas exchanges efficiency (i.e., dominant shoot type, leaf size and roughness) was evidenced. The study highlights the importance of characterizing the relationships among almond cultivar traits that affect plant performance under drought in order to better assist planting choices and orchard irrigation management for given environmental contexts.

Synergetic effect of complex soil amendments to improve soil quality and alleviate toxicity of heavy metal(loid)s in contaminated arable soil: toward securing crop food safety and productivity.

Globally, various types of soil amendments have been used to improve the fertility and quality of soils in agricultural lands. In heavy metal(loid) (HM)-contaminated land, the soil amendments can also act as an immobilizing agent, thereby detoxifying HMs. A pot experiment was conducted to investigate the effects of three different complex amendments, including T1 (gypsum + peat moss + steel slag; GPMSS), T2 (GPMSS + lime), and T3 (GPMSS + lime + sulfate), on biogeochemical properties of the HM-contaminated arable soils, including Soil A and Soil B, and the magnitude of HM uptake by Chinese cabbage (Brassica rapa L.) for 6 weeks. All the examined complex amendments improved soils' physical and biological properties by increasing the water-stable aggregate (WSA) ratio by 18-54% and dehydrogenase activity (DHA) by 300-1333 mg triphenyl formazan (TPF) kg-1 24 h-1 in comparison to control soils. The concentrations of HMs accumulated in B. rapa appeared to decrease tremendously, attributed to effectively immobilizing the HMs in soils by incorporating complex amendments mediated by soil pH, dissolved organic carbon (DOC), and complexation with the components of amendments. All these positive changes in soil properties resulted in the elevation of B. rapa productivity. For instance, T1 treatment induced an increase of plant dry weight (DW) by 3.7-3.9 times compared to the controls. Suppose there are no typical differences in the efficiency among the treatments. In that case, our findings still suggest that using complex amendments for the HM-contaminated arable soils would be beneficial by bringing a synergetic effect on improving soil biogeochemical properties and alleviating HM toxicity, which eventually can enhance plant growth performance.

Evaluation of the Potential Use of a Collagen-Based Protein Hydrolysate as a Plant Multi-Stress Protectant.

Protein hydrolysates (PHs) are a class of plant biostimulants used in the agricultural practice to improve crop performance. In this study, we have assessed the capacity of a commercial PH derived from bovine collagen to mitigate drought, hypoxic, and Fe deficiency stress in Zea mays. As for the drought and hypoxic stresses, hydroponically grown plants treated with the PH exhibited an increased growth and absorption area of the roots compared with those treated with inorganic nitrogen. In the case of Fe deficiency, plants supplied with the PH mixed with FeCl3 showed a faster recovery from deficiency compared to plants supplied with FeCl3 alone or with FeEDTA, resulting in higher SPAD values, a greater concentration of Fe in the leaves and modulation in the expression of genes related to Fe. Moreover, through the analysis of circular dichroism spectra, we assessed that the PH interacts with Fe in a dose-dependent manner. Various hypothesis about the mechanisms of action of the collagen-based PH as stress protectant particularly in Fe-deficiency, are discussed.

Facile Coating of Urea With Low-Dose ZnO Nanoparticles Promotes Wheat Performance and Enhances Zn Uptake Under Drought Stress.

Zinc oxide nanoparticles (ZnO-NPs) hold promise as novel fertilizer nutrients for crops. However, their ultra-small size could hinder large-scale field application due to potential for drift, untimely dissolution or aggregation. In this study, urea was coated with ZnO-NPs (1%) or bulk ZnO (2%) and evaluated in wheat (Triticum aestivum L.) in a greenhouse, under drought (40% field moisture capacity; FMC) and non-drought (80% FMC) conditions, in comparison with urea not coated with ZnO (control), and urea with separate ZnO-NP (1%) or bulk ZnO (2%) amendment. Plants were exposed to ≤ 2.17 mg/kg ZnO-NPs and ≤ 4.34 mg/kg bulk-ZnO, indicating exposure to a higher rate of Zn from the bulk ZnO. ZnO-NPs and bulk-ZnO showed similar urea coating efficiencies of 74-75%. Drought significantly (p ≤ 0.05) increased time to panicle initiation, reduced grain yield, and inhibited uptake of Zn, nitrogen (N), and phosphorus (P). Under drought, ZnO-NPs significantly reduced average time to panicle initiation by 5 days, irrespective of coating, and relative to the control. In contrast, bulk ZnO did not affect time to panicle initiation. Compared to the control, grain yield increased significantly, 51 or 39%, with ZnO-NP-coated or uncoated urea. Yield increases from bulk-ZnO-coated or uncoated urea were insignificant, compared to both the control and the ZnO-NP treatments. Plant uptake of Zn increased by 24 or 8% with coated or uncoated ZnO-NPs; and by 78 or 10% with coated or uncoated bulk-ZnO. Under non-drought conditions, Zn treatment did not significantly reduce panicle initiation time, except with uncoated bulk-ZnO. Relative to the control, ZnO-NPs (irrespective of coating) significantly increased grain yield; and coated ZnO-NPs enhanced Zn uptake significantly. Zn fertilization did not significantly affect N and P uptake, regardless of particle size or coating. Collectively, these findings demonstrate that coating urea with ZnO-NPs enhances plant performance and Zn accumulation, thus potentiating field-scale deployment of nano-scale micronutrients. Notably, lower Zn inputs from ZnO-NPs enhanced crop productivity, comparable to higher inputs from bulk-ZnO. This highlights a key benefit of nanofertilizers: a reduction of nutrient inputs into agriculture without yield penalities.

Interactive Effects of Genotype and Molybdenum Supply on Yield and Overall Fruit Quality of Tomato.

Molybdenum (Mo) is an essential trace element for plant growth, development, and production. However, there is little known about the function and effects of molybdenum in tomato plants. The present study assessed the influences of different Mo concentrations on four tomato F1 hybrids ("Bybal" F1, "Tyty" F1, "Paride" F1, and "Ornela" F1) grown using a soilless system with different Mo levels [0.0, 0.5 (standard NS), 2.0, and 4.0 µmol L-1, respectively]. The crop yield, plant vigor, fruit skin color, TA, fruit water content as well as the accumulation of SSC, and some antioxidant compounds such as lycopene, polyphenols and ascorbic acid were evaluated. The minerals concentration, including nitrogen (N), Mo, iron (Fe), and copper (Cu), were measured in tomato fruits. Results revealed that tomato plants grown with 2.0 µmol Mo L-1 compared to plants grown with 0.5 µmol Mo L-1 incurred a significant increase of total yield by 21.7%, marketable yield by 9.1%, aboveground biomass by 16.7%, plant height at 50 DAT by 6.5%, polyphenol content by 3.5%, ascorbic acid by 1.0%, SSC by 3.5%, N fruit content by 24.8%, Mo fruit content by 20.0%, and Fe fruit content by 60.5%. However, the Mo concentration did not significantly influence the average fruit weight, b* fruit skin color coordinate and TA. Furthermore, tomato fruits from plants grown with 2.0 µmol Mo L-1 showed a lower Cu fruit content (16.1%) than fruits from plants grown with 0.5 µmol Mo L-1 (standard NS). Consequently, our study highlights the different behavior of the tomato genotypes tested when subjected to different levels of Mo concentration in the nutrient solution. Nevertheless, taking all in consideration our results clearly suggest that a Mo fertilization of 2.0 µmol Mo L-1 effectively enhance crop performance and overall fruit quality of tomato.

Improvements in wheat productivity and soil quality can accomplish by co-application of biochars and chemical fertilizers.

The beneficial role of biochar is evident in most of infertile soils, however this is argued that increment in crop yield owing to biochar application does not always achieve in cultivated/fertile soils. The nutrient biochar believed to enhance crop yield and soil fertility than structural biochar that may offset the positive effect of chemical fertilizer on crop performance but improves soil structural properties. Therefore, we investigated the effect of biochars [produced from nutrient rich feedstocks like poultry manure (PMB) and farmyard manure (FMB) and structural feedstocks such as wood chips (WCB) and kitchen waste (KWB)], and chemical fertilizers (CF) when applied alone or in combination on soil chemical properties, wheat growth, yield and nitrogen uptake in a cultivated clay loam soil. Sole biochar treatments increased the total carbon and mineral nitrogen content that were 21 and 106% higher, respectively compared to control after 128days (P<0.001). Contrarily, sole biochars application did not increase wheat biological yield and N uptake compared to control (P>0.05) except PMB, the nutrient biochar (P<0.05). Compared to control, grain yield was 6 and 12% lower in WCB and FMB, respectively but not differed from KWB, PMB or WCB-CF. Conversely, co-application of biochars and CF treatments increased crop biological yield but the increment was the highest in nutrient biochars FMB or PMB (29 or 26%), than structural biochars WCB and KWB (15 and 13%), respectively (P<0.05). For N uptake, this increment varies between 16 and 27% and again nutrient biochar has significantly higher N uptake than structural biochars. Hence, nutrient biochars (i.e. PMB) benefited the soil fertility and crop productivity more than structural biochars. Therefore, for immediate crop benefits, it is recommended to use nutrient biochar alone or in combination with chemical fertilizer. Such practice will improve crop performance and the quality of cultivated soil.