The Root Cap Cuticle: A Cell Wall Structure for Seedling Establishment and Lateral Root Formation.

The root cap surrounding the tip of plant roots is thought to protect the delicate stem cells in the root meristem. We discovered that the first layer of root cap cells is covered by an electron-opaque cell wall modification resembling a plant cuticle. Cuticles are polyester-based protective structures considered exclusive to aerial plant organs. Mutations in cutin biosynthesis genes affect the composition and ultrastructure of this cuticular structure, confirming its cutin-like characteristics. Strikingly, targeted degradation of the root cap cuticle causes a hypersensitivity to abiotic stresses during seedling establishment. Furthermore, lateral root primordia also display a cuticle that, when defective, causes delayed outgrowth and organ deformations, suggesting that it facilitates lateral root emergence. Our results show that the previously unrecognized root cap cuticle protects the root meristem during the critical phase of seedling establishment and promotes the efficient formation of lateral roots.

Transmembrane Pickets Connect Cyto- and Pericellular Skeletons Forming Barriers to Receptor Engagement.

Phagocytic receptors must diffuse laterally to become activated upon clustering by multivalent targets. Receptor diffusion, however, can be obstructed by transmembrane proteins ("pickets") that are immobilized by interacting with the cortical cytoskeleton. The molecular identity of these pickets and their role in phagocytosis have not been defined. We used single-molecule tracking to study the interaction between Fcγ receptors and CD44, an abundant transmembrane protein capable of indirect association with F-actin, hence likely to serve as a picket. CD44 tethers reversibly to formin-induced actin filaments, curtailing receptor diffusion. Such linear filaments predominate in the trailing end of polarized macrophages, where receptor mobility was minimal. Conversely, receptors were most mobile at the leading edge, where Arp2/3-driven actin branching predominates. CD44 binds hyaluronan, anchoring a pericellular coat that also limits receptor displacement and obstructs access to phagocytic targets. Force must be applied to traverse the pericellular barrier, enabling receptors to engage their targets.

Friction Mediates Scission of Tubular Membranes Scaffolded by BAR Proteins.

Membrane scission is essential for intracellular trafficking. While BAR domain proteins such as endophilin have been reported in dynamin-independent scission of tubular membrane necks, the cutting mechanism has yet to be deciphered. Here, we combine a theoretical model, in vitro, and in vivo experiments revealing how protein scaffolds may cut tubular membranes. We demonstrate that the protein scaffold bound to the underlying tube creates a frictional barrier for lipid diffusion; tube elongation thus builds local membrane tension until the membrane undergoes scission through lysis. We call this mechanism friction-driven scission (FDS). In cells, motors pull tubes, particularly during endocytosis. Through reconstitution, we show that motors not only can pull out and extend protein-scaffolded tubes but also can cut them by FDS. FDS is generic, operating even in the absence of amphipathic helices in the BAR domain, and could in principle apply to any high-friction protein and membrane assembly.

Diffusion barriers imposed by tissue topology shape Hedgehog morphogen gradients.

Animals use a small number of morphogens to pattern tissues, but it is unclear how evolution modulates morphogen signaling range to match tissues of varying sizes. Here, we used single-molecule imaging in reconstituted morphogen gradients and in tissue explants to determine that Hedgehog diffused extracellularly as a monomer, and rapidly transitioned between membrane-confined and -unconfined states. Unexpectedly, the vertebrate-specific protein SCUBE1 expanded Hedgehog gradients by accelerating the transition rates between states without affecting the relative abundance of molecules in each state. This observation could not be explained under existing models of morphogen diffusion. Instead, we developed a topology-limited diffusion model in which cell-cell gaps create diffusion barriers, which morphogens can only overcome by passing through a membrane-unconfined state. Under this model, SCUBE1 promoted Hedgehog secretion and diffusion by allowing it to transiently overcome diffusion barriers. This multiscale understanding of morphogen gradient formation unified prior models and identified knobs that nature can use to tune morphogen gradient sizes across tissues and organisms.

An elastic proteinaceous envelope encapsulates the early Arabidopsis embryo.

Plant external surfaces are often covered by barriers that control the exchange of molecules, protect from pathogens and offer mechanical integrity. A key question is when and how such surface barriers are generated. Post-embryonic surfaces have well-studied barriers, including the cuticle, and it has been previously shown that the late Arabidopsis thaliana embryo is protected by an endosperm-derived sheath deposited onto a primordial cuticle. Here, we show that both cuticle and sheath are preceded by another structure during the earliest stages of embryogenesis. This structure, which we named the embryonic envelope, is tightly wrapped around the embryonic surface but can be physically detached by cell wall digestion. We show that this structure is composed primarily of extensin and arabinogalactan O-glycoproteins and lipids, which appear to form a dense and elastic crosslinked embryonic envelope. The envelope forms in cuticle-deficient mutants and in a mutant that lacks endosperm. This embryo-derived envelope is therefore distinct from previously described cuticle and sheath structures. We propose that it acts as an expandable diffusion barrier, as well as a means to mechanically confine the embryo to maintain its tensegrity during early embryogenesis.

The OsDIR55 gene increases salt tolerance by altering the root diffusion barrier.

The increased soil salinity is becoming a major challenge to produce more crops and feed the growing population of the world. In this study, we demonstrated that overexpression of OsDIR55 gene enhances rice salt tolerance by altering the root diffusion barrier. OsDIR55 is broadly expressed in all examined tissues and organs with the maximum expression levels at lignified regions in rice roots. Salt stress upregulates the expression of OsDIR55 gene in an abscisic acid (ABA)-dependent manner. Loss-function and overexpression of OsDIR55 compromised and improved the development of CS and root diffusion barrier, manifested with the decreased and increased width of CS, respectively, and ultimately affected the permeability of the apoplastic diffusion barrier in roots. OsDIR55 deficiency resulted in Na+ accumulation, ionic imbalance, and growth arrest, whereas overexpression of OsDIR55 enhances salinity tolerance and provides an overall benefit to plant growth and yield potential. Collectively, we propose that OsDIR55 is crucial for ions balance control and salt stress tolerance through regulating lignification-mediated root barrier modifications in rice.

Human neural progenitors establish a diffusion barrier in the endoplasmic reticulum membrane during cell division.

Asymmetric segregation of cellular components regulates the fate and behavior of somatic stem cells. Similar to dividing budding yeast and precursor cells in Caenorhabditis elegans, it has been shown that mouse neural progenitors establish a diffusion barrier in the membrane of the endoplasmic reticulum (ER), which has been associated with asymmetric partitioning of damaged proteins and cellular age. However, the existence of an ER diffusion barrier in human cells remains unknown. Here, we used fluorescence loss in photobleaching (FLIP) imaging to show that human embryonic stem cell (hESC)- and induced pluripotent stem cell (iPSC)-derived neural progenitor cells establish an ER diffusion barrier during cell division. The human ER diffusion barrier is regulated via lamin-dependent mechanisms and is associated with asymmetric segregation of mono- and polyubiquitylated damaged proteins. Further, forebrain regionalized organoids derived from hESCs were used to show the establishment of an ER membrane diffusion barrier in more naturalistic tissues, mimicking early steps of human brain development. Thus, the data provided here show that human neural progenitors establish a diffusion barrier during cell division in the membrane of the ER, which may allow for asymmetric segregation of cellular components, contributing to the fate and behavior of human neural progenitor cells.

Actin filaments form a size-dependent diffusion barrier around centrosomes.

The centrosome, a non-membranous organelle, constrains various soluble molecules locally to execute its functions. As the centrosome is surrounded by various dense components, we hypothesized that it may be bordered by a putative diffusion barrier. After quantitatively measuring the trapping kinetics of soluble proteins of varying size at centrosomes by a chemically inducible diffusion trapping assay, we find that centrosomes are highly accessible to soluble molecules with a Stokes radius of less than 5.8 nm, whereas larger molecules rarely reach centrosomes, indicating the existence of a size-dependent diffusion barrier at centrosomes. The permeability of this barrier is tightly regulated by branched actin filaments outside of centrosomes and it decreases during anaphase when branched actin temporally increases. The actin-based diffusion barrier gates microtubule nucleation by interfering with γ-tubulin ring complex recruitment. We propose that actin filaments spatiotemporally constrain protein complexes at centrosomes in a size-dependent manner.

Unlocking a Fast Track for Magnesium Migration in Cu1.8S1-xSex via Anion-Tuning Chemistry.

Rechargeable magnesium batteries (rMBs) are promising candidates for next-generation batteries in which sulfides are widely used as cathode materials. The slow kinetics, low redox reversibility, and poor magnesium storage stability induced by the large Coulombic resistance and ionic polarization of Mg2+ ions have obstructed the development of high-performance rMBs. Herein, a Cu1.8S1-xSex cathode material with a two-dimensional sheet structure has been prepared by an anion-tuning strategy, achieving improved magnesium storage capacity and cycling stability. Element-specific synchrotron radiation analysis is evidence that selenium incorporation has indeed changed the chemical state of Cu species. Density functional theory calculations combined with kinetics analysis reveal that the anionic substitution endows the Cu1.8S1-xSex electrode with favorable charge-transfer kinetics and low ion diffusion barrier. The principal magnesium storage mechanisms and structural evolution process have been revealed in details based on a series of ex situ investigations. Our findings provide an effective heteroatom-tuning tactic of optimizing electrode structure toward advanced energy storage devices.

Oxygen Vacancies Boosted Hydronium Intercalation: A Paradigm Shift in Aluminum-Based Batteries.

In aqueous aluminum-ion batteries (AAIBs), the insertion/extraction chemistry of Al3+ often leads to poor kinetics, whereas the rapid diffusion kinetics of hydronium ions (H3O+) may offer the solution. However, the presence of considerable Al3+ in the electrolyte hinders the insertion reaction of H3O+. Herein, we report how oxygen-deficient α-MoO3 nanosheets unlock selective H3O+ insertion in a mild aluminum-ion electrolyte. The abundant oxygen defects impede the insertion of Al3+ due to excessively strong adsorption, while allowing H3O+ to be inserted/diffused through the Grotthuss proton conduction mechanism. This research advances our understanding of the mechanism behind selective H3O+ insertion in mild electrolytes.

Septin Defects Favour Symmetric Inheritance of the Budding Yeast Deceptive Courtship Memory.

Mnemons are prion-like elements that encode cellular memories of past cellular adaptations and do not spread to progenies during cell divisions. During the deceptive courtship in budding yeast, the Whi3 mnemon (Whi3mnem) condenses into a super-assembly to encode a mating pheromone refractory state established in the mother cell. Whi3mnem is confined to the mother cell such that their daughter cells have the ability to respond to the mating pheromone. Confinement of Whi3mnem involves its association with the endoplasmic reticulum membranes and the compartmentalization of these membranes by the lateral membrane diffusion barrier at the bud neck, the limit between the mother cell and the bud. However, during the first cell division after the establishment of the pheromone refractory state, this adaptation is more likely to be inherited by the daughter cell than in subsequent cell divisions. Here, we show that the first cell division is associated with larger daughter cells and cytokinesis defects, traits that are not observed in subsequent cell divisions. The cytoskeletal septin protein shows aberrant localisation in these divisions and the septin-dependent endoplasmic reticulum membrane diffusion barrier is weakened. Overall, these data suggest that cytokinesis defects associated with prolonged cell division can alter the confinement and inheritance pattern of a cellular memory.

Comparing anatomy, chemical composition, and water permeability of suberized organs in five plant species: wax makes the difference.

MAIN CONCLUSION: The efficiency of suberized plant/environment interfaces as transpiration barriers is not established by the suberin polymer but by the wax molecules sorbed to the suberin polymer. Suberized cell walls formed as barriers at the plant/soil or plant/atmosphere interface in various plant organs (soil-grown roots, aerial roots, tubers, and bark) were enzymatically isolated from five different plant species (Clivia miniata, Monstera deliciosa, Solanum tuberosum, Manihot esculenta, and Malus domestica). Anatomy, chemical composition and efficiency as transpiration barriers (water loss in m s-1) of the different suberized cell wall samples were quantified. Results clearly indicated that there was no correlation between barrier properties of the suberized interfaces and the number of suberized cell layers, the amount of soluble wax and the amounts of suberin. Suberized interfaces of C. miniata roots, M. esculenta roots, and M. domestica bark periderms formed poor or hardly any transpiration barrier. Permeances varying between 1.1 and 5.1 × 10-8 m s-1 were very close to the permeance of water (7.4 × 10-8 m s-1) evaporating from a water/atmosphere interface. Suberized interfaces of aerial roots of M. deliciosa and tubers of S. tuberosum formed reasonable transpiration barriers with permeances varying between 7.4 × 10-10 and 4.2 × 10-9 m s-1, which were similar to the upper range of permeances measured with isolated cuticles (about 10-9 m s-1). Upon wax extraction, permeances of M. deliciosa and S. tuberosum increased nearly tenfold, which proves the importance of wax establishing a transpiration barrier. Finally, highly opposite results obtained with M. esculenta and S. tuberosum periderms are discussed in relation to their agronomical importance for postharvest losses and tuber storage.

Monolayer, Bilayer, and Bulk BSi as Potential Anode Materials of Li-Ion Batteries.

Monolayer, bilayer, and bulk BSi are studied to explore their application potential as anode materials of Li-ion batteries. Structural stability and metallicity are obtained in each case. The Li storage capacities of monolayer and bilayer BSi are 1378 and 689 mAh g-1 , respectively, with average open circuit voltages of 1.30 and 0.47 V as well as Li diffusion barriers of 0.48 and 0.27 eV. Bulk BSi realizes a layered structure in the presence of a small amount of Li and its Li diffusion barrier of 0.48 eV is identical to that of graphite and lower than that of bulk Si (0.58 eV). The Li storage capacity of bulk BSi is found to be 689 mAh g-1 , i. e., much higher than that of graphite (372 mAh g-1 ). The volume expansion turns out to be 33 % and the chemical bonds remain intact at full lithiation, outperforming the 72 % volume expansion of bulk Si at the same capacity and thus pointing to excellent cyclability.

α-graphyne as a promising anode material for Na-ion batteries: a first-principles study.

Lithium-ion batteries (LIBs) have emerged as a technological game-changer. Due to the rising price of lithium and the environmental concerns LIBs pose, their use is no longer viable. Sodium (Na) may be the best contender among the alternatives for replacing lithium. Conventional graphite has a limited capacity for Na storage. Hence,α-graphyne, an allotrope of carbon, was studied here as a potential anode material for Na-ion batteries (NIBs), employing density functional theory. In-plane Na atom adsorption results in a semi-metallic to metallic transition ofα-graphyne. Electronic transport calculations show an increase in current after Na adsorption in graphyne. The successive adsorption of Na atoms on the surface of graphyne leads to a theoretical capacity of 1395.89 mA h g-1, which is much greater than graphite. The average open circuit voltage is 0.81 V, which is an ideal operating voltage for NIBs. Intra- and inter-hexagon Na diffusions have very low energy barriers of 0.18 eV and 0.96 eV, respectively, which ensure smooth operation during charge/discharge cycles. According to this study, theα-graphyne monolayer thus has the potential to be employed as an anode in NIBs.

First-principles investigation of copper diffusion barrier performance in defective 2D layered materials.

This paper investigates the diffusion barrier performance of 2D layered materials with pre-existing vacancy defects using first-principles density functional theory. Vacancy defects in 2D materials may give rise to a large amount of Cu accumulation, and consequently, the defect becomes a diffusion path for Cu. Five 2D layered structures are investigated as diffusion barriers for Cu, i.e. graphene with C vacancy, hBN with B/N vacancy, and MoS2with Mo/2S vacancy. The calculated energy barriers using climbing image-nudged elastic band show that MoS2-V2Shas the highest diffusion energy barrier among other 2D layers, followed by hBN-VNand graphene. The obtained energy barrier of Cu on defected layer is found to be proportional to the length of the diffusion path. Moreover, the diffusion of Cu through vacancy defects is found to modulate the electronic structures and magnetic properties of the 2D layer. The charge density difference shows that there exists a considerable charge transfer between Cu and barrier layer as quantified by Bader charge. Given the current need for an ultra-thin diffusion barrier layer, the obtained results contribute to the field of application of 2D materials as Cu diffusion barrier in the presence of mono-vacancy defects.

Hopanoid lipids may facilitate aerobic nitrogen fixation in the ocean.

Cyanobacterial diazotrophs are considered to be the most important source of fixed N2 in the open ocean. Biological N2 fixation is catalyzed by the extremely O2-sensitive nitrogenase enzyme. In cyanobacteria without specialized N2-fixing cells (heterocysts), mechanisms such as decoupling photosynthesis from N2 fixation in space or time are involved in protecting nitrogenase from the intracellular O2 evolved by photosynthesis. However, it is not known how cyanobacterial cells limit O2 diffusion across their membranes to protect nitrogenase in ambient O2-saturated surface ocean waters. Here, we explored all known genomes of the major marine cyanobacterial lineages for the presence of hopanoid synthesis genes, since hopanoids are a class of lipids that might act as an O2 diffusion barrier. We found that, whereas all non-heterocyst-forming cyanobacterial diazotrophs had hopanoid synthesis genes, none of the marine Synechococcus, Prochlorococcus (non-N2-fixing), and marine heterocyst-forming (N2-fixing) cyanobacteria did. Finally, we conclude that hopanoid-enriched membranes are a conserved trait in non-heterocyst-forming cyanobacterial diazotrophs that might lower the permeability to extracellular O2 This membrane property coupled with high respiration rates to decrease intracellular O2 concentration may therefore explain how non-heterocyst-forming cyanobacterial diazotrophs can fix N2 in the fully oxic surface ocean.

Realization of a PEDOT:PSS/Graphene Oxide On-Chip Pseudo-Reference Electrode for Integrated ISFETs.

A stable reference electrode (RE) plays a crucial role in the performance of an ion-sensitive field-effect transistor (ISFET) for bio/chemical sensing applications. There is a strong demand for the miniaturization of the RE for integrated sensor systems such as lab-on-a-chip (LoC) or point-of-care (PoC) applications. Out of several approaches presented so far to integrate an on-chip electrode, there exist critical limitations such as the effect of analyte composition on the electrode potential and drifts during the measurements. In this paper, we present a micro-scale solid-state pseudo-reference electrode (pRE) based on poly(3,4-ethylene dioxythiophene): poly(styrene sulfonic acid) (PEDOT:PSS) coated with graphene oxide (GO) to deploy with an ion-sensitive field-effect transistor (ISFET)-based sensor platform. The PEDOT:PSS was electropolymerized from its monomer on a micro size gold (Au) electrode and, subsequently, a thin GO layer was deposited on top. The stability of the electrical potential and the cross-sensitivity to the ionic strength of the electrolyte were investigated. The presented pRE exhibits a highly stable open circuit potential (OCP) for up to 10 h with a minimal drift of ~0.65 mV/h and low cross-sensitivity to the ionic strength of the electrolyte. pH measurements were performed using silicon nanowire field-effect transistors (SiNW-FETs), using the developed pRE to ensure good gating performance of electrolyte-gated FETs. The impact of ionic strength was investigated by measuring the transfer characteristic of a SiNW-FET in two electrolytes with different ionic strengths (1 mM and 100 mM) but the same pH. The performance of the PEDOT:PSS/GO electrode is similar to a commercial electrochemical Ag/AgCl reference electrode.

Strategy to Enhance the Cycling Stability of the Metallic Lithium Anode in Li-Metal Batteries.

Based on the analysis of systematic research (density functional theory calculations, physical characterizations, and electrochemical performances), here, we report a novel mixture surface modification layer of LiC6&LiF, which can enhance the lithium-ion diffusion and decrease the local current density. This is beneficial to the improvement of cycling stability. As a result, the Li@LiC6&LiF-5/NCM half-cell possesses an excellent capacity retention of 94% after 100 cycles at 0.1C, with a capacity decay of only 0.06% per cycle. For comparison, the capacity retention of a pristine Li/NCM cell is only 9.3% after 100 cycles. Our study confirms that compositing the high ionic conductivity layer (e.g., LiC6&LiF for the first time) is a promising avenue to stabilize lithium-metal anodes. From this perspective, we concisely review recent discoveries in this field and suggest possible new research directions for further development of Li-metal batteries.

Thermodynamic Regulation of Dendrite-Free Li Plating on Li3Bi for Stable Lithium Metal Batteries.

Rechargeable batteries with metallic lithium (Li) anodes are attracting ever-increasing interests because of their high theoretical specific capacity and energy density. However, the dendrite growth of the Li anode during cycling leads to poor stability and severe safety issues. Here, Li3Bi alloy coated carbon cloth is rationally chosen as the substrate of the Li anode to suppress the dendrite growth from a thermodynamic aspect. The adsorption energy of a Li atom on Li3Bi is larger than the cohesive energy of bulk Li, enabling uniform Li nucleation and deposition, while the high diffusion barrier of the Li atom on Li3Bi blocks the migration of adatoms from adsorption sites to the regions of fast growth, which further ensures uniform Li deposition. With the dendrite-free Li deposition, the composite Li/Li3Bi anode enables over 250 cycles at an ultrahigh current density of 20 mA cm-2 in a symmetrical cell and delivers superior electrochemical performance in full batteries.

Seedless Cu Electroplating on Ru-W Thin Films for Metallisation of Advanced Interconnects.

For decades, Ta/TaN has been the industry standard for a diffusion barrier against Cu in interconnect metallisation. The continuous miniaturisation of transistors and interconnects into the nanoscale are pushing conventional materials to their physical limits and creating the need to replace them. Binary metallic systems, such as Ru-W, have attracted considerable attention as possible replacements due to a combination of electrical and diffusion barrier properties and the capability of direct Cu electroplating. The process of Cu electrodeposition on Ru-W is of fundamental importance in order to create thin, continuous, and adherent films for advanced interconnect metallisation. This work investigates the effects of the current density and application method on the electro-crystallisation behaviour of Cu. The film structure, morphology, and chemical composition were assessed by digital microscopy, atomic force microscopy, scanning and transmission electron microscopies, energy-dispersive X-ray spectroscopy, and X-ray diffraction. The results show that it was possible to form a thin Cu film on Ru-W with interfacial continuity for current densities higher than 5 mA·cm-2; however, the substrate regions around large Cu particles remained uncovered. Pulse-reverse current application appears to be more beneficial than direct current as it decreased the average Cu particle size.