A high-density linkage map and sex-determination loci in Pacific white shrimp (Litopenaeus vannamei).

BACKGROUND: Expansion of genomic resources for the Pacific white shrimp (Litopenaeus vannamei), such as the construction of dense genetic linkage maps, is crucial for the application of genomic tools in order to improve economically relevant traits. Sexual dimorphism exists in Pacific white shrimp, and the mapping of the sex-determination region in this species may help in future reproductive applications. We have constructed male, female, and sex-averaged high-density genetic maps using a 50 K single-nucleotide polymorphism (SNP) array, followed by a genome-wide association study (GWAS) to identify genomic regions associated with sex in white shrimp. RESULTS: The genetic map yielded 15,256 SNPs assigned to 44 linkage groups (LG). The lengths of the male, female, and sex-averaged maps were 5,741.36, 5,461.20 and 5,525.26 cM, respectively. LG18 was found to be the largest for both sexes, whereas LG44 was the shortest for males and LG31 for females. A sex-determining region was found in LG31 with 21 statistically significant SNPs. The most important SNP was previously identified as a sex-linked marker and was able to identify 99% of the males and 88% of the females. Although other significant markers had a lower ability to determine sex, putative genes were intercepted or close to them. The oplophorus-luciferin 2-monooxygenase, serine/arginine repetitive matrix protein and spermine oxidase genes were identified as candidates with possible participation in important processes of sexual differentiation in shrimp. CONCLUSIONS: Our results provide novel genomic resources for shrimp, including a high-density linkage map and new insights into the sex-determining region in L. vannamei, which may be usefulfor future genetics and reproduction applications.

Genome-wide QTL and eQTL mapping reveal genes associated with growth rate trait of the Pacific white shrimp (Litopenaeus vannamei).

BACKGROUND: Growth rate is a crucial economic trait for farmed animals, but the genetic regulation of this trait is largely unknown in non-model organisms such as shrimp. RESULTS: In this study, we performed genome-wide phenotypic quantitative trait loci (QTL) and expression quantitative trait loci (eQTL) mapping analyses to identify genes affecting the growth rate of Pacific white shrimp (Litopenaeus vannamei), which is the most commercially-farmed crustacean worldwide. We used RNA-sequencing of 268 individuals in a mapping population, and subsequently validated our findings through gene silencing and shrimp growth experiments. We constructed a high-density genetic linkage map comprising 5533 markers spanning 44 linkage groups, with a total distance of 6205.75 cM and an average marker interval of 1.12 cM. Our analyses identified 11 QTLs significantly correlated with growth rate, and 117,525 eQTLs. By integrating QTL and eQTL data, we identified a gene (metalloreductase STEAP4) highly associated with shrimp growth rate. RNA interference (RNAi) analysis and growth experiments confirmed that STEAP4 was significantly correlated with growth rate in L. vannamei. CONCLUSIONS: Our results indicate that the comprehensive analysis of QTL and eQTL can effectively identify genes involved in complex animal traits. This is important for marker-assisted selection (MAS) of animals. Our work contributes to the development of shrimp breeding and available genetic resources.

High-density genetic map construction and QTL mapping of a zigzag-shaped stem trait in tea plant (Camellia sinensis).

The highly unique zigzag-shaped stem phenotype in tea plants boasts significant ornamental value and is exceptionally rare. To investigate the genetic mechanism behind this trait, we developed BC1 artificial hybrid populations. Our genetic analysis revealed the zigzag-shaped trait as a qualitative trait. Utilizing whole-genome resequencing, we constructed a high-density genetic map from the BC1 population, incorporating 5,250 SNP markers across 15 linkage groups, covering 3,328.51 cM with an average marker interval distance of 0.68 cM. A quantitative trait locus (QTL) for the zigzag-shaped trait was identified on chromosome 4, within a 61.2 to 97.2 Mb range, accounting for a phenotypic variation explained (PVE) value of 13.62%. Within this QTL, six candidate genes were pinpointed. To better understand their roles, we analyzed gene expression in various tissues and individuals with erect and zigzag-shaped stems. The results implicated CsXTH (CSS0035625) and CsCIPK14 (CSS0044366) as potential key contributors to the zigzag-shaped stem formation. These discoveries lay a robust foundation for future functional genetic mapping and tea plant genetic enhancement.

Mapping quantitative trait loci associated with self-(in)compatibility in goji berries (Lycium barbarum).

BACKGROUND: Goji (Lycium barbarum L.) is a perennial deciduous shrub widely distributed in arid and semiarid regions of Northwest China. It is highly valued for its medicinal and functional properties. Most goji varieties are naturally self-incompatible, posing challenges in breeding and cultivation. Self-incompatibility is a complex genetic trait, with ongoing debates regarding the number of self-incompatible loci. To date, no genetic mappings has been conducted for S loci or other loci related to self-incompatibility in goji. RESULTS: We used genome resequencing to create a high-resolution map for detecting de novo single-nucleotide polymorphisms (SNP) in goji. We focused on 229 F1 individuals from self-compatible '13-19' and self-incompatible 'new 9' varieties. Subsequently, we conducted a quantitative trait locus (QTL) analysis on traits associated with self-compatibility in goji berries. The genetic map consisted of 249,327 SNPs distributed across 12 linkage groups (LGs), spanning a total distance of 1243.74 cM, with an average interval of 0.002 cM. Phenotypic data related to self-incompatibility, such as average fruit weight, fruit rate, compatibility index, and comparable compatibility index after self-pollination and geitonogamy, were collected for the years 2021-2022, as well as for an extra year representing the mean data from 2021 to 2022 (2021/22). A total of 43 significant QTL, corresponding to multiple traits were identified, accounting for more than 11% of the observed phenotypic variation. Notably, a specific QTL on chromosome 2 consistently appeared across different years, irrespective of the relationship between self-pollination and geitonogamy. Within the localization interval, 1180 genes were annotated, including Lba02g01102 (annotated as an S-RNase gene), which showed pistil-specific expression. Cloning of S-RNase genes revealed that the parents had two different S-RNase alleles, namely S1S11 and S2S8. S-genotype identification of the F1 population indicated segregation of the four S-alleles from the parents in the offspring, with the type of S-RNase gene significantly associated with self-compatibility. CONCLUSIONS: In summary, our study provides valuable insights into the genetic mechanism underlying self-compatibility in goji berries. This highlights the importance of further positional cloning investigations and emphasizes the importance of integration of marker-assisted selection in goji breeding programs.

A fine-scale genetic map of the Japanese population.

Genetic maps are fundamental resources for linkage and association studies. A fine-scale genetic map can be constructed by inferring historical recombination events from the genome-wide structure of linkage disequilibrium-a non-random association of alleles among loci-by using population-scale sequencing data. We constructed a fine-scale genetic map and identified recombination hotspots from 10 092 551 bi-allelic high-quality autosomal markers segregating among 150 unrelated Japanese individuals whose genotypes were determined by high-coverage (30×) whole-genome sequencing, and the genotype quality was carefully controlled by using their parents' and offspring's genotypes. The pedigree information was also utilized for haplotype phasing. The resulting genome-wide recombination rate profiles were concordant with those of the worldwide population on a broad scale, and the resolution was much improved. We identified 9487 recombination hotspots and confirmed the enrichment of previously known motifs in the hotspots. Moreover, we demonstrated that the Japanese genetic map improved the haplotype phasing and genotype imputation accuracy for the Japanese population. The construction of a population-specific genetic map will help make genetics research more accurate.

High-Density Genetic Map Construction and Quantitative Trait Locus Analysis of Fruit- and Oil-Related Traits in Camellia oleifera Based on Double Digest Restriction Site-Associated DNA Sequencing.

Camellia oleifera, an important tree species and source of edible oil in China, has received significant attention owing to the oil's high unsaturated fatty acid content, which has benefits for human health. However, the mechanisms underlying C. oleifera yield and oil quality are largely unknown. In this study, 180 F1 progenies were obtained from two parents with obvious differences in fruit- and oil-related traits. We constructed a high-density genetic map using a double digest restriction site-associated DNA sequencing (ddRAD-Seq) strategy in C. oleifera. This map spanned 3327 cM and anchored 2780 markers in 15 linkage groups (LGs), with an average marker interval of 1.20 cM. A total of 221 quantitative trait loci (QTLs) associated with fruit- and oil-related traits were identified across three years' worth of phenotypic data. Nine QTLs were detected simultaneously in at least two different years, located on LG02, LG04, LG05, LG06, and LG11, and explained 8.5-16.6% of the phenotypic variation in the corresponding traits, respectively. Seventeen major QTLs were obtained that explained 13.0-16.6% of the phenotypic variance. Eleven and five flanking SNPs of major QTLs for fruit- and oil-related traits were detected which could be used for marker-assisted selection in C. oleifera breeding programs. Furthermore, 202 potential candidate genes in QTL regions were identified based on the collinearity of the genetic map and the C. oleifera "CON" genome. A potential regulatory network controlling fruit development and oil biosynthesis was constructed to dissect the complex mechanism of oil accumulation. The dissection of these QTLs will facilitate the gene cloning underlying lipid synthesis and increase our understanding in order to enhance C. oleifera oil yield and quality.

High-resolution bin-based linkage mapping uncovers the genetic architecture and heterosis-related loci of plant height in indica-japonica derived populations.

Plant height (PH) is an important trait affecting the plant architecture, seed yield, and harvest index. However, the molecular mechanisms underlying PH heterosis remain unclear. In addition, useful PH-related genes must be urgently identified to facilitate ideal plant architecture breeding in rice (Oryza sativa L.). In the present study, to explore rice quantitative trait loci (QTLs) and heterosis-related loci of PH in rice, we developed a high-generation (>F15 ) population of 272 recombinant inbred lines (RIL) from a cross of two elite varieties, Luohui 9 (indica/xian) × RPY geng (japonica/geng), and two testcross hybrid populations derived from the crosses of RILs and two cytoplasmic male sterile lines (YTA [indica] and Z7A [japonica]). Using deep resequencing data, a high-density genetic map containing 4758 bin markers was constructed, with a total map distance of 2356.41 cM. Finally, 31 PH-related QTLs for different PH component lengths or tiller numbers across five seasons were identified. Two major environment-specific PH QTLs were stably detected in Hainan (qPH-3.1) or Hubei (qPH-5.1), which have undergone significant functional alterations in rice with changes in geographical environment. Based on comparative genomics, gene function annotation, homolog identification, and existing literature (pioneering studies), candidate genes for multiple QTLs were fine-mapped, and the candidate genes qPH-3.1 and qPH-5.1 for PH were further validated using CRISPR-Cas9 gene editing. Specifically, qPH-3.1 was characterized as a pleiotropic gene, and the qPH-3.1 knockout line showed reduced PH, delayed heading, a decreased seed setting rate, and increased tiller numbers. Importantly, 10 PH heterosis-related QTLs were identified in the testcross populations, and a better-parent heterosis locus (qBPH-5.2) completely covered qPH-5.1. Furthermore, the cross results of fixed-genotype RILs verified the dominant effects of qPH-3.1 and qPH-5.1. Together, these findings further our understanding of the genetic mechanisms of PH and offer multiple highly reliable gene targets for breeding rice varieties with ideal architecture and high yield potential in the immediate future.

Spruce giga-genomes: structurally similar yet distinctive with differentially expanding gene families and rapidly evolving genes.

Spruces (Picea spp.) are coniferous trees widespread in boreal and mountainous forests of the northern hemisphere, with large economic significance and enormous contributions to global carbon sequestration. Spruces harbor very large genomes with high repetitiveness, hampering their comparative analysis. Here, we present and compare the genomes of four different North American spruces: the genome assemblies for Engelmann spruce (Picea engelmannii) and Sitka spruce (Picea sitchensis) together with improved and more contiguous genome assemblies for white spruce (Picea glauca) and for a naturally occurring introgress of these three species known as interior spruce (P. engelmannii × glauca × sitchensis). The genomes were structurally similar, and a large part of scaffolds could be anchored to a genetic map. The composition of the interior spruce genome indicated asymmetric contributions from the three ancestral genomes. Phylogenetic analysis of the nuclear and organelle genomes revealed a topology indicative of ancient reticulation. Different patterns of expansion of gene families among genomes were observed and related with presumed diversifying ecological adaptations. We identified rapidly evolving genes that harbored high rates of non-synonymous polymorphisms relative to synonymous ones, indicative of positive selection and its hitchhiking effects. These gene sets were mostly distinct between the genomes of ecologically contrasted species, and signatures of convergent balancing selection were detected. Stress and stimulus response was identified as the most frequent function assigned to expanding gene families and rapidly evolving genes. These two aspects of genomic evolution were complementary in their contribution to divergent evolution of presumed adaptive nature. These more contiguous spruce giga-genome sequences should strengthen our understanding of conifer genome structure and evolution, as their comparison offers clues into the genetic basis of adaptation and ecology of conifers at the genomic level. They will also provide tools to better monitor natural genetic diversity and improve the management of conifer forests. The genomes of four closely related North American spruces indicate that their high similarity at the morphological level is paralleled by the high conservation of their physical genome structure. Yet, the evidence of divergent evolution is apparent in their rapidly evolving genomes, supported by differential expansion of key gene families and large sets of genes under positive selection, largely in relation to stimulus and environmental stress response.

Construction of the first high-density SNP genetic map and identification of QTLs for the natural rubber content in Taraxacum kok-saghyz Rodin.

BACKGROUND: Taraxacum kok-saghyz Rodin (TKS) is a promising commercial alternative natural rubber (NR) yielding plant. Cultivating TKS with a high NR content is an important breeding target, and developing molecular markers related to NR content can effectively accelerate the breeding process of TKS. RESULTS: To construct a high-density SNP genetic map and uncover genomic regions related to the NR content in TKS, an F1 mapping population of TKS was constructed by crossing two parents (l66 and X51) with significant differences in NR contents. The NR content of the F1 plants ranged from 0.30 to 15.14% and was distributed normally with a coefficient of variation of 47.61%, indicating quantitative trait inheritance. Then, employing whole-genome resequencing (WGR), a TKS genetic linkage map of 12,680 bin markers comprising 322,439 SNPs was generated. Based on the genetic map and NR content of the F1 population, six quantitative trait loci (QTLs) for NR content with LOD > 4.0 were identified on LG01/Chr01 and LG06/Chr06. Of them, the 2.17 Mb genomic region between qHRC-C6-1 and qHRC-C6-2 on ChrA06, with 65.62% PVE in total, was the major QTL region. In addition, the six QTLs have significant additive genetic effects on NR content and could be used to develop markers for marker-assisted selection (MAS) in TKS with a high NR content. CONCLUSION: This work constructed the first high-density TKS genetic map and identified the QTLs and genomic regions controlling the NR content, which provides useful information for fine mapping, map-based cloning, and MAS in TKS.

Local ancestry inference in heterogeneous populations-Are recent recombination events more relevant?

To date, numerous software tools have been developed to infer recombination maps. Many of these software tools infer the recombination rate from linkage disequilibrium, and therefore they infer recombination many generations into the past. Other recently developed methods rely on the inference of recent recombination events to determine the recombination rate, such as identity by descent- and local ancestry inference (LAI)-based tools. Methods that mainly use recent recombination events to infer the recombination rate might be more relevant for certain analyses like LAI. We therefore describe a protocol for creating high-resolution, population-specific recombination maps using methods that mainly use recent recombination events and a method that uses recent and distant recombination events for recombination rate inference. Subsequently, we compared the effect of using maps inferred by these two paradigms on LAI accuracy.

Identification of an important QTL for seed oil content in soybean.

Seed oil content is one of the most important quantitative traits in soybean (Glycine max) breeding. Here, we constructed a high-density single nucleotide polymorphism linkage map using two genetically similar parents, Heinong 84 and Kenfeng 17, that differ dramatically in their seed oil contents, and performed quantitative trait loci (QTL) mapping of seed oil content in a recombinant inbred line (RIL) population derived from their cross. We detected five QTL related to seed oil content distributed on five chromosomes. The QTL for seed oil content explained over 10% of the phenotypic variation over two years. This QTL was mapped to an interval containing 20 candidate genes, including a previously reported gene, soybean RING Finger 1a (RNF1a) encoding an E3 ubiquitin ligase. Notably, two short sequences were inserted in the GmRNF1a coding region of KF 17 compared to that of HN 84, resulting in a longer protein variant in KF 17. Our results thus provide information for uncovering the genetic mechanisms determining seed oil content in soybean, as well as identifying an additional QTL and highlighting GmRNF1a as candidate gene for modulating seed oil content in soybean. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-023-01384-2.

Refinement of Rf1-gene localization and development of the new molecular markers for fertility restoration in sunflower.

BACKGROUND: Ability to restore male fertility is important trait for sunflower breeding. The most commonly used fertility restoration gene in the production of sunflower hybrids is Rf1. The localization of Rf1 on the linkage group 13 has been previously shown, however, its exact position, its sequence and molecular mechanism for fertility restoration remain unknown. Therefore, several markers linked to Rf1 gene, commonly used for MAS, don't always allow to identify the genotype of plants. For this reason, the search for new markers and precise localization of the Rf1 gene is an urgent task. METHODS AND RESULTS: Based on previously identified single nucleotide polymorphisms (SNPs) at LG13, significantly associated with the ability to restore male fertility, two markers have been developed that have performed well after careful evaluation. These markers, together with other Rf1 markers, were applied for genotyping 72 diversity panel accessions and 291 individuals of F2 segregating population, obtained from crossing the cytoplasmic male sterility (CMS) AHO33 and restorer RT085HO lines. The analysis revealed no recombinants between Rf1 gene and SRF833 marker, the distance between Rf1 and SRF122 marker was 1.0 cM. CONCLUSIONS: Data obtained made it possible to specify the localization of the Rf1 gene and reduce the list of candidate genes to the 3 closely linked PPR-genes spanning a total of 59 Kb. However, it cannot be ruled out that analysis of the candidate region in the genome of fertility restorer lines can reveal new candidate genes in this locus that are absent in the cytoplasmic male sterility maintainer reference sequence.

First Vanilla planifolia High-Density Genetic Linkage Map Provides Quantitative Trait Loci for Resistance to Fusarium oxysporum.

Fusarium oxysporum f. sp. radicis-vanillae (Forv), the causal agent of root and stem rot disease, is the main pathogen affecting vanilla production. Sources of resistance have been reported in Vanilla planifolia G. Jackson ex Andrews, the main cultivated vanilla species. In this study, we developed the first high-density genetic map in this species with 1,804 genotyping-by-sequencing (GBS)-generated single nucleotide polymorphism (SNP) markers using 125 selfed progenies of the CR0040 traditional vanilla cultivar. Sixteen linkage groups (LG) were successfully constructed, with a mean of 113 SNPs and an average length of 207 cM per LG. The map had a high density with an average of 5.45 SNP every 10 cM and an average distance of 1.85 cM between adjacent markers. The first three LG were aligned against the first assembled chromosome of CR0040, and the other 13 LG were correctly associated with the other 13 assembled chromosomes. The population was challenged with the highly pathogenic Forv strain Fo072 using the root-dip inoculation method. Five traits were mapped, and 20 QTLs were associated with resistance to Fo072. Among the genes retrieved in the CR0040 physical regions associated with QTLs, genes potentially involved in biotic resistance mechanisms, coding for kinases, E3 ubiquitin ligases, pentatricopeptide repeat-containing proteins, and one leucine-rich repeat receptor underlying the qFo72_08.1 QTL have been highlighted. This study should provide useful resources for marker-assisted selection in V. planifolia.

Molecular mapping for fruit-related traits, and joint identification of candidate genes and selective sweeps for seed size in melon.

Melon is a popular fruit vegetable crop worldwide with diverse morphological variation. We report a high-density genetic map of melon and nine major QTLs with physical region ranging from 43.47 kb to 1.89 Mb. Importantly, two seed-related trait QTLs were repeatedly detected in two environments, and the mapping region was narrowed to 522 kb according to a regional linkage analysis. A total of 40 annotated genes were screened for nonsynonymous variations, of which EVM0009818, involved in cytokinin-activated signaling, was differentially expressed in the young fruits of parents based on RNA-seq. Selective sweep analysis identified 152 sweep signals for seed size, including the two seed-related QTLs and nine homologs that have been verified to regulate seed size in Arabidopsis or rice. This work illustrates the power of a joint analysis combining resequencing-based genetic map for QTL mapping and a combination of KASP genotyping and RNA-seq analysis to facilitate QTL fine mapping.

Construction of a High-Density Paulownia Genetic Map and QTL Mapping of Important Phenotypic Traits Based on Genome Assembly and Whole-Genome Resequencing.

Quantitative trait locus (QTL) mapping based on a genetic map is a very effective method of marker-assisted selection in breeding, and whole-genome resequencing is one of the useful methods to obtain high-density genetic maps. In this study, the hybrid assembly of Illumina, PacBio, and chromatin interaction mapping data was used to construct high-quality chromosomal genome sequences of Paulownia fortunei, with a size of 476.82 Mb, a heterozygosity of 0.52%, and a contig and scaffold N50s of 7.81 Mb and 21.81 Mb, respectively. Twenty scaffolds with a total length of 437.72 Mb were assembled into 20 pseudochromosomes. Repeat sequences with a total length of 243.96 Mb accounted for 51.16% of the entire genome. In all, 26,903 protein-coding gene loci were identified, and 26,008 (96.67%) genes had conserved functional motifs. Further comparative genomics analysis preliminarily showed that the split of P. fortunei with Tectona grandis likely occurred 38.8 (33.3-45.1) million years ago. Whole-genome resequencing was used to construct a merged genetic map of 20 linkage groups, with 2993 bin markers (3,312,780 SNPs), a total length of 1675.14 cm, and an average marker interval of 0.56 cm. In total, 73 QTLs for important phenotypic traits were identified (19 major QTLs with phenotypic variation explained ≥ 10%), including 10 for the diameter at breast height, 7 for the main trunk height, and 56 for branch-related traits. These results not only enrich P. fortunei genomic data but also form a solid foundation for fine QTL mapping and key marker/gene mining of Paulownia, which is of great significance for the directed genetic improvement of these species.

QTL Mapping and Transcriptome Analysis Reveal Candidate Genes Regulating Seed Color in Brassica napus.

Yellow seeds are desirable in rapeseed breeding because of their higher oil content and better nutritional quality than black seeds. However, the underlying genes and formation mechanism of yellow seeds remain unclear. Here, a novel yellow-seeded rapeseed line (Huangaizao, HAZ) was crossed with a black-seeded rapeseed line (Zhongshuang11, ZS11) to construct a mapping population of 196 F2 individuals, based on which, a high-density genetic linkage map was constructed. This map, comprising 4174 bin markers, was 1618.33 cM in length and had an average distance of 0.39 cM between its adjacent markers. To assess the seed color of the F2 population, three methods (imaging, spectrophotometry, and visual scoring) were used and a common major quantitative trait locus (QTL) on chromosome A09, explaining 10.91-21.83% of the phenotypic variance, was detected. Another minor QTL, accounting for 6.19-6.69% of the phenotypic variance, was detected on chromosome C03, only by means of imaging and spectrophotometry. Furthermore, a dynamic analysis of the differential expressions between the parental lines showed that flavonoid biosynthesis-related genes were down-regulated in the yellow seed coats at 25 and 35 days after flowering. A coexpression network between the differentially expressed genes identified 17 candidate genes for the QTL intervals, including a flavonoid structure gene, novel4557 (BnaC03.TT4), and two transcription factor genes, namely, BnaA09G0616800ZS (BnaA09.NFYA8) and BnaC03G0060200ZS (BnaC03.NAC083), that may regulate flavonoid biosynthesis. Our study lays a foundation for further identifying the genes responsible for and understanding the regulatory mechanism of yellow seed formation in Brassica napus.

QTL Mapping and a Transcriptome Integrative Analysis Uncover the Candidate Genes That Control the Cold Tolerance of Maize Introgression Lines at the Seedling Stage.

Chilling injury owing to low temperatures severely affects the growth and development of maize (Zea mays.L) seedlings during the early and late spring seasons. The existing maize germplasm is deficient in the resources required to improve maize's ability to tolerate cold injury. Therefore, it is crucial to introduce and identify excellent gene/QTLs that confer cold tolerance to maize for sustainable crop production. Wild relatives of maize, such as Z. perennis and Tripsacum dactyloides, are strongly tolerant to cold and can be used to improve the cold tolerance of maize. In a previous study, a genetic bridge among maize that utilized Z. perennis and T. dactyloides was created and used to obtain a highly cold-tolerant maize introgression line (MIL)-IB030 by backcross breeding. In this study, two candidate genes that control relative electrical conductivity were located on MIL-IB030 by forward genetics combined with a weighted gene co-expression network analysis. The results of the phenotypic, genotypic, gene expression, and functional verification suggest that two candidate genes positively regulate cold tolerance in MIL-IB030 and could be used to improve the cold tolerance of cultivated maize. This study provides a workable route to introduce and mine excellent genes/QTLs to improve the cold tolerance of maize and also lays a theoretical and practical foundation to improve cultivated maize against low-temperature stress.

Construction of a high-density genetic map and identification of QTLs related to agronomic and physiological traits in an interspecific (Gossypium hirsutum × Gossypium barbadense) F2 population.

BACKGROUND: Advances in genome sequencing technology, particularly restriction-site associated DNA sequence (RAD-seq) and whole-genome resequencing, have greatly aided the construction of cotton interspecific genetic maps based on single nucleotide polymorphism (SNPs), Indels, and other types of markers. High-density genetic maps can improve accuracy of quantitative trait locus (QTL) mapping, narrow down location intervals, and facilitate identification of the candidate genes. RESULT: In this study, 249 individuals from an interspecific F2 population (TM-1 and Hai7124) were re-sequenced, yielding 6303 high-confidence bin markers spanning 5057.13 cM across 26 cotton chromosomes. A total of 3380 recombination hot regions RHRs were identified which unevenly distributed on the 26 chromosomes. Based on this map, 112 QTLs relating to agronomic and physiological traits from seedling to boll opening stage were identified, including 15 loci associated with 14 traits that contained genes harboring nonsynonymous SNPs. We analyzed the sequence and expression of these ten candidate genes and discovered that GhRHD3 (GH_D10G0500) may affect fiber yield while GhGPAT6 (GH_D04G1426) may affect photosynthesis efficiency. CONCLUSION: Our research illustrates the efficiency of constructing a genetic map using binmap and QTL mapping on the basis of a certain size of the early-generation population. High-density genetic map features high recombination exchanges in number and distribution. The QTLs and the candidate genes identified based on this high-density genetic map may provide important gene resources for the genetic improvement of cotton.

Accurate recombination estimation from pooled genotyping and sequencing: a case study on barley.

Sexual reproduction involves meiotic recombination and the creation of crossing over between homologous chromosomes, which leads to new allele combinations. We present a new approach that uses the allele frequency differences and the physical distance of neighboring polymorphisms to estimate the recombination rate from pool genotyping or sequencing. This allows a considerable cost reduction compared to conventional mapping based on genotyping or sequencing data of single individuals. We evaluated the approach based on computer simulations at various genotyping depths and population sizes as well as applied it to experimental data of 45 barley populations, comprising 4182 RIL. High correlations between the recombination rates from this new pool genetic mapping approach and conventional mapping in simulated and experimental barley populations were observed. The proposed method therefore provides a reliable genetic map position and recombination rate estimation in defined genomic windows.

Construction of a high-density genetic map using specific-length amplified fragment markers and identification of QTLs for branching angle in poplar.

Branching angle is a critical factor that determines the morphological establishment and is a typical quantitative trait controlled by multiple genes. In this study, we used SLAF-seq to construct a high-density genetic map, to investigate the genetic architecture of branching angle in poplar (Populus leucopyramidalis). A total of 240,672 SLAF tags were obtained, including 103,691 polymorphic SLAF tags. After filtering, 53,407 polymorphic markers were sorted into eight segregation types, and 11,162 of them were used to construct the genetic map. 8447 were on the female parent map, 8532 were on the male parent map, and 11,162 were on the integrated map. The marker coverage was 4820.84 and 5044.80 cM for the female and male maps, and 3142.61 cM for the integrated map. The average intervals between two adjacent mapped markers were 0.55, 0.59, and 0.28 cM for the three maps, respectively. Two quantitative trait loci (QTLs) were detected. Seven markers that exceeded the threshold in these two regions were considered as being associated with branching angle and the phenotypic variance explained by each of these marker was 10.64-11.66%. After functional annotation, we identified 15 candidate genes and analyzed the expression of candidate genes in narrow and wide crown progenies by qRT-PCR. These results show that the combination of QTL and SLAF-seq will contribute to future breeding plans in poplar breeding, especially in narrow crown poplar breeding.