ABSTRACT
Copper is distinctive in electrocatalyzing reduction of CO2 into various energy-dense forms, but it often suffers from limited product selectivity including ethanol in competition with ethylene. Here, we describe systematically designed, bimetallic electrocatalysts based on copper/gold heterojunctions with a faradaic efficiency toward ethanol of 60% at currents in excess of 500 mA cm-2. In the modified catalyst, the ratio of ethanol to ethylene is enhanced by a factor of 200 compared to copper catalysts. Analysis by ATR-IR measurements under operating conditions, and by computational simulations, suggests that reduction of CO2 at the copper/gold heterojunction is dominated by generation of the intermediate OCCOH*. The latter is a key contributor in the overall, asymmetrical electrohydrogenation of CO2 giving ethanol rather than ethylene.
ABSTRACT
Electrochemical conversion of N2 into ammonia presents a sustainable pathway to produce hydrogen storage carrier but yet requires further advancement in electrocatalyst design and electrolyzer integration. This technology suffers from low selectivity and yield owing to the extremely strong N≡N bond and the exceptionally low solubility of N2 in aqueous systems. A high NH3 synthesis performance is restricted by the high activation energy of N≡N bond and the supply insufficiency of N2 to active sites. This paper describes the introduction of electron-rich Bi0 sites into Ag catalysts with a high-pressure electrolyzer that enables a dramatically enhanced Faradaic efficiency of 44.0% and yield of 28.43 µg cm-2 h-1 at 4.0 MPa. Combined with density functional theory results, in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy demonstrates that N2 reduction reaction follows an associative mechanism, in which a high coverage of N-N bond and -NH2 intermediates suggest electron-rich Bi0 boosts sound activation of N2 molecules and low hydrogenation barrier. The proposed strategy of engineering electrochemical catalysts and devices provides powerful guidelines for achieving industrial-level green ammonia production.
ABSTRACT
SignificanceThe chemical reduction of unsaturated bonds occurs by hydrogenation with H2 as the reductant. Conversely, in biology, the unavailability of H2 engenders the typical reduction of unsaturated bonds with electrons and protons from different cofactors, requiring olefin hydrogenation to occur by proton-coupled electron transfer (PCET). Moreover, the redox noninnocence of tetrapyrrole macrocycles furnishes unusual PCET intermediates, including the phlorin, which is an intermediate in tetrapyrrole ring reductions. Whereas the phlorin of a porphyrin is well established, the phlorin of a chlorin is enigmatic. By controlling the PCET reactivity of a chlorin, including the use of a hangman functionality to manage the proton transfer, the formation of a chlorinphlorin by PCET is realized, and the mechanism for its formation is defined.
ABSTRACT
The conversion of CO2 into fuels and chemicals is an attractive option for mitigating CO2 emissions. Controlling the selectivity of this process is beneficial to produce desirable liquid fuels, but C-C coupling is a limiting step in the reaction that requires high pressures. Here, we propose a strategy to favor C-C coupling on a supported Ru/TiO2 catalyst by encapsulating it within the polymer layers of an imine-based porous organic polymer that controls its selectivity. Such polymer confinement modifies the CO2 hydrogenation behavior of the Ru surface, significantly enhancing the C2+ production turnover frequency by 10-fold. We demonstrate that the polymer layers affect the adsorption of reactants and intermediates while being stable under the demanding reaction conditions. Our findings highlight the promising opportunity of using polymer/metal interfaces for the rational engineering of active sites and as a general tool for controlling selective transformations in supported catalyst systems.
ABSTRACT
Accurately decoding the three-dimensional atomic structure of surface active sites is essential yet challenging for a rational catalyst design. Here, we used comprehensive techniques combining the pair distribution function and reverse Monte Carlo simulation to reveal the surficial distribution of Pd active sites and adjacent coordination environment in palladium-copper nanoalloys. After the fine-tuning of the atomic arrangement, excellent catalytic performance with 98% ethylene selectivity at complete acetylene conversion was obtained in the Pd34Cu66 nanocatalysts, outperforming most of the reported advanced catalysts. The quantitative deciphering shows a large number of active sites with a Pd-Pd coordination number of 3 distributed on the surface of Pd34Cu66 nanoalloys, which play a decisive role in highly efficient semihydrogenation. This finding not only opens the way for guiding the precise design of bimetal nanocatalysts from atomic-level insight but also provides a method to resolve the spatial structure of active sites.
ABSTRACT
Atomic ordering of noble metal alloys is an effective strategy for improving catalytic performance, yet the low-temperature synthesis of ordered alloys still faces significant challenges. The low-temperature liquid phase method has enormous potential for the synthesis of alloys; however, the atomic ordering mechanism of this process has not been thoroughly studied. Herein, we investigate the mechanism of the influence of metal precursors, reducing agents, solvents, and mixing modes of reactant regulating strategies on precious metal alloy ordering using this method. These regulating strategies are designed to change the coordination structure of metal complexes, affect the reduction potential of metals, and thus change the reduction order of metals and their arrangement in the alloy products. Notably, the reduction potential differences between metal complexes can be used to predict the ordering of the synthetic products (Pd-Cu, Pd-Cd, Pd-Sn, Pd-Pb, and Pt-Sn). This work provides an excellent platform for investigating atomic arrangement engineering.
ABSTRACT
Highly active nonprecious-metal single-atom catalysts (SACs) toward catalytic transfer hydrogenation (CTH) of α,ß-unsaturated aldehydes are of great significance but still are deficient. Herein, we report that Zn-N-C SACs containing Zn-N3 moieties can catalyze the conversion of cinnamaldehyde to cinnamyl alcohol with a conversion of 95.5% and selectivity of 95.4% under a mild temperature and atmospheric pressure, which is the first case of Zn-species-based heterogeneous catalysts for the CTH reaction. Isotopic labeling, in situ FT-IR spectroscopy, and DFT calculations indicate that reactants, coabsorbed at the Zn sites, proceed CTH via a "Meerwein-Ponndorf-Verley" mechanism. DFT calculations also reveal that the high activity over Zn-N3 moieties stems from the suitable adsorption energy and favorable reaction energy of the rate-determining step at the Zn active sites. Our findings demonstrate that Zn-N-C SACs hold extraordinary activity toward CTH reactions and thus provide a promising approach to explore the advanced SACs for high-value-added chemicals.
ABSTRACT
The CO2 hydrogenation reaction to produce methanol holds great significance as it contributes to achieving a CO2-neutral economy. Previous research identified isolated Cu+ species doping the oxide surface of a Cu-MgO-Al2O3-mixed oxide derived from a hydrotalcite precursor as the active site in CO2 hydrogenation, stabilizing monodentate formate species as a crucial intermediate in methanol synthesis. In this work, we present a molecular-level understanding of how surface water and hydroxyl groups play a crucial role in facilitating spontaneous CO2 activation at Cu+ sites and the formation of monodentate formate species. Computational evidence has been experimentally validated by comparing the catalytic performance of the Cu-MgO-Al2O3 catalyst with hydroxyl groups against that of its hydrophobic counterpart, where hydroxyl groups are blocked using an esterification method. Our work highlights the synergistic effect between doped Cu+ ions and adjacent hydroxyl groups, both of which serve as key parameters in regulating methanol production via CO2 hydrogenation. By elucidating the specific roles of these components, we contribute to advancing our understanding of the underlying mechanisms and provide valuable insights for optimizing methanol synthesis processes.
ABSTRACT
Observational data show complex organic molecules in the interstellar medium (ISM). Hydrogenation of small unsaturated carbon double bond could be one way for molecular complexification. It is important to understand how such reactivity occurs in the very cold and low-pressure ISM. Yet, there is water ice in the ISM, either as grain or as mantle around grains. Therefore, the addition of atomic hydrogen on double-bonded carbon in a series of seven molecules have been studied and it was found that water catalyzes this reaction. The origin of the catalysis is a weak charge transfer between the π MO of the unsaturated molecule and H atom, allowing a stabilizing interaction with H2O. This mechanism is rationalized using the non-covalent interaction and the quantum theory of atoms in molecules approaches.
ABSTRACT
Selective semi-hydrogenation of alkynes is a significant reaction for preparing functionalized alkenes. Electrochemical semi-hydrogenation presents a sustainable alternative to the traditional thermal process. In this research, affordable copper acetylacetonate is employed as a catalyst precursor for the electrocatalytic hydrogenation of alkynes, using MeOH as the hydrogen source in an undivided cell. Good to excellent yields for both aromatic and aliphatic internal/terminal alkynes are obtained under constant current conditions. Notably, up to 99% Z selectivity is achieved for various internal alkynes. Mechanistic investigations revealed the formation of copper nanoparticles (NPs) at the cathode during electrolysis, acting as the catalyst for the selective semireduction of alkynes. The copper NPs deposited cathode demonstrated reusable for further hydrogenation.
ABSTRACT
Selective hydrogenation of nitrostyrenes is a great challenge due to the competitive activation of the nitro groups (âNO2 ) and carbon-carbon (CâC) double bonds. Photocatalysis has emerged as an alternative to thermocatalysis for the selective hydrogenation reaction, bypassing the precious metal costs and harsh conditions. Herein, two crystalline phases of layered ternary sulfide Cu2 WS4 , that is, body-centered tetragonal I-Cu2 WS4 nanosheets and primitive tetragonal P-Cu2 WS4 nanoflowers, are controlled synthesized by adjusting the capping agents. Remarkably, these nanostructures show visible-light-driven photocatalytic performance for selective hydrogenation of 3-nitrostyrene under mild conditions. In detail, the I-Cu2 WS4 nanosheets show excellent conversion of 3-nitrostyrene (99.9%) and high selectivity for 3-vinylaniline (98.7%) with the assistance of Na2 S as a hole scavenger. They also can achieve good hydrogenation selectivity to 3-ethylnitrobenzene (88.5%) with conversion as high as 96.3% by using N2 H4 as a proton source. Mechanism studies reveal that the photogenerated electrons and in situ generated protons from water participate in the former hydrogenation pathway, while the latter requires the photogenerated holes and in situ generated reactive oxygen species to activate the N2 H4 to form cis-N2 H2 for further reduction. The present work expands the rational synthesis of ternary sulfide nanostructures and their potential application for solar-energy-driven organic transformations.
ABSTRACT
For supporting active metal, the cavity confinement and mass transfer facilitation lie not in one sack, a trade-off between high activity and good stability of the catalyst is present. Porous organic cages (POCs) are expected to break the trade-off when metal particles are properly loaded. Herein, three organic cages (CC3, RCC3, and FT-RCC3) are employed to support Pd nanoclusters for catalytic hydrogenation. Subnanometer Pd clusters locate differently in different cage frameworks by using the same reverse double-solvents approach. Compared with those encapsulated in the intrinsic cavity of RCC3 and anchored on the outer surface of CC3, the Pd nanoclusters orderly assembled in FT-RCC3 crystal via isomorphous substitution exhibit superior activity, high selectivity, and good stability for semi-hydrogenation of phenylacetylene. Isomorphous substitution of FT-RCC3 crystal by Pd nanoclusters is originated from high crystallization capacity of FT-RCC3 and specific interaction of each Pd nanocluster with four cage windows. Both confinement function and H2 accumulation capacity of FT-RCC3 are fully utilized to support active Pd nanoclusters for efficient selective hydrogenation. The present results provide a new perspective to the heterogeneous catalysis field in terms of crystalizing metal nanoclusters in POC framework and outside the cage for making the best use of both parts.
ABSTRACT
Bombarding WS2 multilayered nanoparticles and nanotubes with focused ion beams of Ga+ ions at high doses, larger than 1016 cm-2, leads to drastic structural changes and melting of the material. At lower doses, when the damage is negligible or significantly smaller, the amount of implanted Ga is very small. A substantial increase in the amount of implanted Ga, and not appreciable structural damage, are observed in nanoparticles previously hydrogenated by a radio-frequency activated hydrogen plasma. Density functional calculations reveal that the implantation of Ga in the spaces between adjacent layers of pristine WS2 nanoparticles is difficult due to the presence of activation barriers. In contrast, in hydrogenated WS2, the hydrogen molecules are able to intercalate in between adjacent layers of the WS2 nanoparticles, giving rise to the expansion of the interlayer distances, that in practice leads to the vanishing of the activation barrier for Ga implantation. This facilitates the implantation of Ga atoms in the irradiation experiments.
ABSTRACT
Carbon sorbent materials have shown great promise for solid-state hydrogen (H2) storage. Modification of these materials with nitrogen (N) dopants has been undertaken to develop materials that can store H2 at ambient temperatures. In this work density functional theory (DFT) calculations are used to systematically probe the influence of curvature on the stability and activity of undoped and N-doped carbon materials toward H binding. Specifically, four models of carbon materials are used: graphene, [5,5] carbon nanotube, [5,5] D5d-C120, and C60, to extract and correlate the thermodynamic properties of active sites with varying degrees of sp2 hybridization (curvature). From the calculations and analysis, it is found that graphitic N-doping is thermodynamically favored on more pyramidal sites with increased curvature. In contrast, it is found that the hydrogen binding energy is weakly affected by curvature and is dominated by electronic effects induced by N-doping. These findings highlight the importance of modulating the heteroatom doping configuration and the lattice topology when developing materials for H2 storage.
ABSTRACT
Asymmetric hydrogenation of alkene moieties is important for the synthesis of chiral molecules, but achieving high stereoselectivity remains a challenge. Biocatalysis using ene-reductases (EReds) offers a viable solution. However, the need for NAD(P)H cofactors limits large-scale applications. Here, we explored an electrochemical alternative for recycling flavin-containing EReds using methyl viologen as a mediator. For this, we built a bio-electrocatalytic setup with an H-type glass reactor cell, proton exchange membrane, and carbon cloth electrode. Experimental results confirm the mediator's electrochemical reduction and enzymatic consumption. Optimization showed increased product concentration at longer reaction times with better reproducibility within 4-6 h. We tested two enzymes, Pentaerythritol Tetranitrate Reductase (PETNR) and the Thermostable Old Yellow Enzyme (TOYE), using different alkene substrates. TOYE showed higher productivity for the reduction of 2-cyclohexen-1-one (1.20 mM h-1), 2-methyl-2-cyclohexen-1-one (1.40 mM h-1) and 2-methyl-2-pentanal (0.40 mM h-1), with enantiomeric excesses ranging from 11% to 99%. PETNR outperformed TOYE in terms of enantioselectivity for the reduction of 2-methyl-2-pentanal (ee 59±7% (S)). Notably, TOYE achieved promising results also in reducing ketoisophorone, a challenging substrate, with similar enantiomeric excess compared to published values using NADH.
ABSTRACT
Anticancer agents that exhibit catalytic mechanisms of action offer a unique multi-targeting strategy to overcome drug resistance. Nonetheless, many in-cell catalysts in development are hindered by deactivation by endogenous nucleophiles. We have synthesised a highly potent, stable Os-based 16-electron half-sandwich ('piano stool') catalyst by introducing a permanent covalent tether between the arene and chelated diamine ligand. This catalyst exhibits antiproliferative activity comparable to the clinical drug cisplatin towards triple-negative breast cancer cells and can overcome tamoxifen resistance. Speciation experiments revealed Os to be almost exclusively albumin-bound in the extracellular medium, while cellular accumulation studies identified an energy-dependent, protein-mediated Os accumulation pathway, consistent with albumin-mediated uptake. Importantly, the tethered Os complex was active for in-cell transfer hydrogenation catalysis, initiated by co-administration of a non-toxic dose of sodium formate as a source of hydride, indicating that the Os catalyst is delivered to the cytosol of cancer cells intact. The mechanism of action involves the generation of reactive oxygen species (ROS), thus exploiting the inherent redox vulnerability of cancer cells, accompanied by selectivity for cancerous cells over non-tumorigenic cells.
Subject(s)
Antineoplastic Agents , Cell Proliferation , Coordination Complexes , Osmium , Humans , Catalysis , Antineoplastic Agents/pharmacology , Antineoplastic Agents/chemistry , Antineoplastic Agents/chemical synthesis , Osmium/chemistry , Osmium/pharmacology , Cell Proliferation/drug effects , Coordination Complexes/chemistry , Coordination Complexes/pharmacology , Coordination Complexes/chemical synthesis , Female , Cell Line, Tumor , Reactive Oxygen Species/metabolism , Breast Neoplasms/pathology , Breast Neoplasms/drug therapy , Breast Neoplasms/metabolism , Drug Screening Assays, Antitumor , Molecular StructureABSTRACT
Ene-reductase (ER) has been widely applied for asymmetrical synthesis of chiral intermediates due to its substrate promiscuity, photoexcited reactivity, and excellent property with producing two chiral centers at a time. Natural ERs often exhibit the same stereoselectivity, and they need to be engineered for opposite configuration of chiral compounds. The hydrogenation process toward activated alkenes by ERs is composed of reductive half reaction and oxidative half reaction, which are dependent upon two cofactors NAD(P)H and flavin mononucleotide. The catalytic activity of ERs will be affected by the size of the substrate, the activating strength of the electron-withdrawing groups, redox potential of cofactors, and the loop flexibility around catalytic cavity. Currently, protein engineering to ERs has been successfully employed to enhance various catalytic properties, including photoexcited asymmetric synthesis. This review summarizes the approaches to reverse the stereoselectivity and enhance catalytic activity of ERs and new applications of the engineered ERs in photobiocatalytic asymmetric synthesis, besides the discussion with the existing molecular mechanisms of mutants regarding the improved catalytic performance.
ABSTRACT
Efficient hydrogenations of terminal alkenes with molecular hydrogen catalyzed by well-defined bench stable Mn(I) complexes containing an N-heterocyclic carbene-based PCP pincer ligand are described. These reactions are environmentally benign and atom economic, implementing an inexpensive, earth abundant non-precious metal catalyst. A range of aromatic and aliphatic alkenes were efficiently converted into alkanes in good to excellent yields. The hydrogenation proceeds at 100 °C with catalyst loadings of 0.25-0.5â mol %, 2.5-5â mol % base (KOt Bu) and a hydrogen pressure of 20â bar. Mechanistic insight into the catalytic reaction is provided by means of DFT calculations.
ABSTRACT
Transition metal-catalyzed asymmetric hydrogenation constitutes an efficient strategy for the preparation of chiral molecules. When dienes are subjected to hydrogenation, control over regioselectivity still presents a large challenge and the fully saturated alkane is often yielded. A few successful monohydrogenations of dienes have been reported, but hitherto these are only efficient for dienes comprised of two distinctly different olefins. Herein, the reactivity of a conjugated carbonyl compound as a function of their conformational freedom is studied, based on a combined experimental and theoretical approach. It was found that alkenes in the (s)-cis conformation experience a large rate acceleration while (s)-trans restrained alkenes undergo hydrogenation slowly. Ultimately, this reactivity aspect was exploited in a novel method for the monohydrogenation of dienes based on conformational restriction ((s)-cis vs (s)-trans). This mode of discrimination conceptually differs from existing monohydrogenations and dienones constructed of two olefins similar in nature could efficiently be hydrogenated to the chiral alkene (up to 99 % ee). The extent of regioselection is even powerful enough to overcome the conventional reactivity order of substituted olefins (di>tri>tetra). This high yielding and atom-economical protocol provides an interesting opportunity to instal a stereogenic center on a carbocycle, while leaving a synthetically useful alkene untouched.
ABSTRACT
The two-electron reduction of 2,3-dimethylbuta-1,3-diene (DMB) with ß-diketiminate and guanidinate substituted dimagnesium(I) compounds has given complexes in which two bidentate amido-magnesium fragments are bridged through the π-system of the DMB dianion, viz. [(LMg)2 (µ-DMB)] (L=Xyl Nacnac, [HC(MeCNXyl)2 ]- , Xyl=2,6-xylyl; or Priso=[(DipN)2 CNPri 2 ]- , Dip=2,6-diisopropylphenyl). Similar double reductions of [4]dendralene (4dend) have afforded the complexes, [(LMg)2 (µ-4dend)] (L=Ar Nacnac, Ar=Xyl or mesityl (Mes); or Priso) in which the 4dend dianion is π-coordinated to the bidentate amido-magnesium fragments. Treatment of several such complexes with THF leads to Z- to E-isomerization of the dendralene fragment, and formation of purely σ-bonded Mg-C interactions in the THF coordinated products [{(Ar Nacnac)(THF)Mg}2 (µ-4dend)] (Ar=Xyl, Mes or Dip). Reaction of myrcene (Myr) with [{(Xyl Nacnac)Mg}2 ] proceeds via reductive coupling of Myr to give a previously unknown acyclic, branched C20 tetra-olefin dianion complex [{(Xyl Nacnac)(THF)Mg}2 (µ-Myr)2 ]. Preliminary reactions of [(LMg)2 (µ-DMB)] with H2 and/or CO yielded a series of products, including novel magnesium hydride compounds, products derived from couplings of CO with the reduced DMB fragment (viz. magnesium dimethylcyclohexadienediolates), and one magnesium cyclopropanetriolate complex from the magnesium(I) induced coupling of DMB with H2 and CO.