Predicting key water stress indicators of Eucalyptus viminalis and Callitris rhomboidea using high-resolution visible to short-wave infrared spectroscopy.

Drought is one of the main factors contributing to tree mortality worldwide and drought events are set to become more frequent and intense in the face of a changing climate. Quantifying water stress of forests is crucial in predicting and understanding their vulnerability to drought-induced mortality. Here, we explore the use of high-resolution spectroscopy in predicting water stress indicators of two native Australian tree species, Callitris rhomboidea and Eucalyptus viminalis. Specific spectral features and indices derived from leaf-level spectroscopy were assessed as potential proxies to predict leaf water potential (Ψleaf), equivalent water thickness (EWT) and fuel moisture content (FMC) in a dedicated laboratory experiment. New spectral indices were identified that enabled very high confidence linear prediction of Ψleaf for both species (R2 > 0.85) with predictive capacity increasing when accounting for a breakpoint in the relationships using segmented regression (E. viminalis, R2 > 0.89; C. rhomboidea, R2 > 0.87). EWT and FMC were also linearly predicted to a high accuracy (E. viminalis, R2 > 0.90; C. rhomboidea, R2 > 0.80). This study highlights the potential of spectroscopy as a tool for predicting measures of plant water noninvasively, enabling broader applications for monitoring and managing plant water stress.

Alternative method for determining leaf CO2 assimilation without gas exchange measurements: Performance, comparison and sensitivity analysis.

We present an alternative method to determine leaf CO2 assimilation rate (An ), eliminating the need for gas exchange measurements in proximal and remote sensing. This method combines the Farquhar-von Caemmerer-Berry photosynthesis model with mechanistic light reaction (MLR) theory and leaf energy balance (EB) analysis. The MLR theory estimates the actual electron transport rate (J) by leveraging chlorophyll fluorescence via pulse amplitude-modulated fluorometry for proximal sensing or sun-induced chlorophyll fluorescence measurements for remote sensing, along with spectral reflectance. The EB equation is used to directly estimate stomatal conductance from leaf temperature. In wheat and soybean, the MLR-EB model successfully estimated An variations, including midday depression, under various environmental and phenological conditions. Sensitivity analysis revealed that the leaf boundary layer conductance (gb ) played an equal, if not more, crucial role compared to the variables for J. This was primarily caused by the indirect influence of gb through the EB equation rather than its direct impact on convective CO2 exchange on the leaf. Although the MLR-EB model requires an accurate estimation of gb , it can potentially reduce uncertainties and enhance applicability in photosynthesis assessment when gas exchange measurements are unavailable.

Deep learning to extract the meteorological by-catch of wildlife cameras.

Microclimate-proximal climatic variation at scales of metres and minutes-can exacerbate or mitigate the impacts of climate change on biodiversity. However, most microclimate studies are temperature centric, and do not consider meteorological factors such as sunshine, hail and snow. Meanwhile, remote cameras have become a primary tool to monitor wild plants and animals, even at micro-scales, and deep learning tools rapidly convert images into ecological data. However, deep learning applications for wildlife imagery have focused exclusively on living subjects. Here, we identify an overlooked opportunity to extract latent, ecologically relevant meteorological information. We produce an annotated image dataset of micrometeorological conditions across 49 wildlife cameras in South Africa's Maloti-Drakensberg and the Swiss Alps. We train ensemble deep learning models to classify conditions as overcast, sunshine, hail or snow. We achieve 91.7% accuracy on test cameras not seen during training. Furthermore, we show how effective accuracy is raised to 96% by disregarding 14.1% of classifications where ensemble member models did not reach a consensus. For two-class weather classification (overcast vs. sunshine) in a novel location in Svalbard, Norway, we achieve 79.3% accuracy (93.9% consensus accuracy), outperforming a benchmark model from the computer vision literature (75.5% accuracy). Our model rapidly classifies sunshine, snow and hail in almost 2 million unlabelled images. Resulting micrometeorological data illustrated common seasonal patterns of summer hailstorms and autumn snowfalls across mountains in the northern and southern hemispheres. However, daily patterns of sunshine and shade diverged between sites, impacting daily temperature cycles. Crucially, we leverage micrometeorological data to demonstrate that (1) experimental warming using open-top chambers shortens early snow events in autumn, and (2) image-derived sunshine marginally outperforms sensor-derived temperature when predicting bumblebee foraging. These methods generate novel micrometeorological variables in synchrony with biological recordings, enabling new insights from an increasingly global network of wildlife cameras.

Non-Destructive Monitoring of Foliar Fungicide Efficacy with Hyperspectral Sensing in Grapevine.

Frequent fungicide applications are required to manage grapevine powdery mildew (Erysiphe necator). However, this practice is costly and has led to widespread fungicide resistance. A method of monitoring in-field fungicide efficacy could help growers maximize spray-interval length, thereby reducing costs and the rate of fungicide resistance emergence. The goal of this study was to evaluate if hyperspectral sensing in the visible to shortwave infrared range (400 to 2,400 nm) can quantify foliar fungicide efficacy on grape leaves. Commercial formulations of metrafenone, Bacillus mycoides isolate J (BmJ), and sulfur were applied on Chardonnay grapevines in vineyard or greenhouse settings. Foliar reflectance was measured with handheld hyperspectral spectroradiometers at multiple days post-application. Fungicide efficacy was estimated as a proxy for fungicide residue and disease control measured with the Blackbird microscopy imaging robot. Treatments could be differentiated from the untreated control with an accuracy of 73.06% for metrafenone, 67.76% for BmJ, and 94.10% for sulfur. The change in spectral reflectance was moderately correlated with the cube root of the area under the disease progress curve for metrafenone- and sulfur-treated samples (R2 = 0.38 and 0.36, respectively) and with sulfur residue (R2 = 0.42). BmJ treatment impacted foliar physiology by enhancing the leaf mass/area and reducing the nitrogen and total phenolic content as estimated from spectral reflectance. The results suggest that hyperspectral sensing can be used to monitor in-situ fungicide efficacy, and the prediction accuracy depends on the fungicide and the time point measured. The ability to monitor in-situ fungicide efficacy could facilitate more strategic fungicide applications and promote sustainable grapevine protection. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Prediction Accuracy of Soil Chemical Parameters by Field- and Laboratory-Obtained vis-NIR Spectra after External Parameter Orthogonalization.

One challenge in predicting soil parameters using in situ visible and near infrared spectroscopy is the distortion of the spectra due to soil moisture. External parameter orthogonalization (EPO) is a mathematical method to remove unwanted variability from spectra. We created two different EPO correction matrices based on the difference between spectra collected in situ and, respectively, spectra collected from the same soil samples after drying and sieving and after drying, sieving and finely grinding. Spectra from 134 soil samples recorded with two different spectrometers were split into calibration and validation sets and the two EPO corrections were applied. Clay, organic carbon and total nitrogen content were predicted by partial least squares regression for uncorrected and EPO-corrected spectra using models based on the same type of spectra ("within domain") as well as using laboratory-based models to predict in situ collected spectra ("cross-domain"). Our results show that the within-domain prediction of clay is improved with EPO corrections only for the research grade spectrometer, with no improvement for the other parameters. For the cross-domain predictions, there was a positive effect from both EPO corrections on all parameters. Overall, we also found that in situ collected spectra provided an equally successful prediction as laboratory-based spectra.

Clean and accurate soil quality monitoring in mining areas under environmental rehabilitation in the Eastern Brazilian Amazon.

Soil quality monitoring in mining rehabilitation areas is a crucial step to validate the effectiveness of the adopted recovery strategy, especially in critical areas for environmental conservation, such as the Brazilian Amazon. The use of portable X-ray fluorescence (pXRF) spectrometry allows a rapid quantification of several soil chemical elements, with low cost and without residue generation, being an alternative for clean and accurate environmental monitoring. Thus, this work aimed to assess soil quality in mining areas with different stages of environmental rehabilitation based on predictions of soil fertility properties through pXRF along with four machine learning algorithms (projection pursuit regression, PPR; support vector machine, SVM; cubist regression, CR; and random forest, RF) in the Eastern Brazilian Amazon. Sandstone and iron mines in different chronological stages of rehabilitation (initial, intermediate, and advanced) were evaluated, in addition to non-rehabilitated and native forest areas. A total of 81 soil samples (26 from sandstone mine and 55 from iron mine) were analyzed by both traditional wet-chemistry methods and pXRF. The available/exchangeable contents of K, Ca, B, Fe, and Al, in addition to H+Al, cation exchange capacity at pH = 7, Al saturation, soil organic matter, pH, sum of bases, base saturation, clay, and sand were accurately predicted (R2 > 0.70) using pXRF data, with emphasis on the prediction of Fe (R2 = 0.93), clay content (R2 = 0.81), H+Al (R2 = 0.81), and K+ (R2 = 0.85). The best predictive models were developed by RF and CR (86%) and when considering pXRF data + mining area + stage of rehabilitation (73%). The results highlight the potential of pXRF to accurately assess soil properties in environmental rehabilitation areas in the Amazon region (yet scarcely evaluated under this approach), promoting a more agile and cheaper preliminary diagnosis compared to traditional methods.

"Estimating soil surface roughness by proximal sensing for soil erosion modeling implementation at field scale".

Soil Surface Roughness (SSR) is a physical feature of soil microtopography, which is strongly influenced by tillage practices and plays a key role in hydrological and soil erosion processes. Therefore, surface roughness indices are required when using models to estimate soil erosion rates, where tabular values or direct measurements can be used. Field measurements often imply out-of-date and time-consuming methods, such as the pin meter and the roller chain, providing inaccurate indices. A novel technique for SSR measurement has been adopted, employing an RGB-Depth camera to produce a small-scale Digital Elevation Model of the soil surface, in order to extrapolate roughness indices. Canopy cover coverage (CC) of the cover crop was also detected from the camera's images. The values obtained for SSR and CC indices were implemented in the MMF (Morgan-Morgan-Finney) model, to validate the reliability of the proposed methodology by comparing the models' results for sediment yields with long-term soil erosion measurements in sloping vineyards in NW Italy. The performance of the model in predicting soil losses was satisfactory to good for a vineyard plot with inter-rows managed with recurrent tillage, and it was improved using spatialized soil roughness input data with respect to a uniform value. Performance for plot with permanent ground cover was not so good, however it was also improved using spatialized data. The measured values were also useful to obtain C-factor for RUSLE application, to be used instead of tabular values.

Detecting Grapevine Virus Infections in Red and White Winegrape Canopies Using Proximal Hyperspectral Sensing.

Grapevine virus-associated disease such as grapevine leafroll disease (GLD) affects grapevine health worldwide. Current diagnostic methods are either highly costly (laboratory-based diagnostics) or can be unreliable (visual assessments). Hyperspectral sensing technology is capable of measuring leaf reflectance spectra that can be used for the non-destructive and rapid detection of plant diseases. The present study used proximal hyperspectral sensing to detect virus infection in Pinot Noir (red-berried winegrape cultivar) and Chardonnay (white-berried winegrape cultivar) grapevines. Spectral data were collected throughout the grape growing season at six timepoints per cultivar. Partial least squares-discriminant analysis (PLS-DA) was used to build a predictive model of the presence or absence of GLD. The temporal change of canopy spectral reflectance showed that the harvest timepoint had the best prediction result. Prediction accuracies of 96% and 76% were achieved for Pinot Noir and Chardonnay, respectively. Our results provide valuable information on the optimal time for GLD detection. This hyperspectral method can also be deployed on mobile platforms including ground-based vehicles and unmanned aerial vehicles (UAV) for large-scale disease surveillance in vineyards.

Designing a Proximal Sensing Camera Acquisition System for Vineyard Applications: Results and Feedback on 8 Years of Experiments.

The potential of image proximal sensing for agricultural applications has been a prolific scientific subject in the recent literature. Its main appeal lies in the sensing of precise information about plant status, which is either harder or impossible to extract from lower-resolution downward-looking image sensors such as satellite or drone imagery. Yet, many theoretical and practical problems arise when dealing with proximal sensing, especially on perennial crops such as vineyards. Indeed, vineyards exhibit challenging physical obstacles and many degrees of variability in their layout. In this paper, we present the design of a mobile camera suited to vineyards and harsh experimental conditions, as well as the results and assessments of 8 years' worth of studies using that camera. These projects ranged from in-field yield estimation (berry counting) to disease detection, providing new insights on typical viticulture problems that could also be generalized to orchard crops. Different recommendations are then provided using small case studies, such as the difficulties related to framing plots with different structures or the mounting of the sensor on a moving vehicle. While results stress the obvious importance and strong benefits of a thorough experimental design, they also indicate some inescapable pitfalls, illustrating the need for more robust image analysis algorithms and better databases. We believe sharing that experience with the scientific community can only benefit the future development of these innovative approaches.

Development of a high-throughput field phenotyping rover optimized for size-limited breeding fields as open-source hardware.

Phenotyping is a critical process in plant breeding, especially when there is an increasing demand for streamlining a selection process in a breeding program. Since manual phenotyping has limited efficiency, high-throughput phenotyping methods are recently popularized owing to progress in sensor and image processing technologies. However, in a size-limited breeding field, which is common in Japan and other Asian countries, it is challenging to introduce large machinery in the field or fly unmanned aerial vehicles over the field. In this study, we developed a ground-based high-throughput field phenotyping rover that could be easily introduced to a field regardless of the scale and location of the field even without special facilities. We also made the field rover open-source hardware, making its system available to public for easy modification, so that anyone can build one for their own use at a low cost. The trial run of the field rover revealed that it allowed the collection of detailed remote-sensing images of plants and quantitative analyses based on the images. The results suggest that the field rover developed in this study could allow efficient phenotyping of plants especially in a small breeding field.

HyScreen: A Ground-Based Imaging System for High-Resolution Red and Far-Red Solar-Induced Chlorophyll Fluorescence.

Solar-induced chlorophyll fluorescence (SIF) is used as a proxy of photosynthetic efficiency. However, interpreting top-of-canopy (TOC) SIF in relation to photosynthesis remains challenging due to the distortion introduced by the canopy's structural effects (i.e., fluorescence re-absorption, sunlit-shaded leaves, etc.) and sun-canopy-sensor geometry (i.e., direct radiation infilling). Therefore, ground-based, high-spatial-resolution data sets are needed to characterize the described effects and to be able to downscale TOC SIF to the leafs where the photosynthetic processes are taking place. We herein introduce HyScreen, a ground-based push-broom hyperspectral imaging system designed to measure red (F687) and far-red (F760) SIF and vegetation indices from TOC with single-leaf spatial resolution. This paper presents measurement protocols, the data processing chain and a case study of SIF retrieval. Raw data from two imaging sensors were processed to top-of-canopy radiance by dark-current correction, radiometric calibration, and empirical line correction. In the next step, the improved Fraunhofer line descrimination (iFLD) and spectral-fitting method (SFM) were used for SIF retrieval, and vegetation indices were calculated. With the developed protocol and data processing chain, we estimated a signal-to-noise ratio (SNR) between 50 and 200 from reference panels with reflectance from 5% to 95% and noise equivalent radiance (NER) of 0.04 (5%) to 0.18 (95%) mW m-2 sr-1 nm-1. The results from the case study showed that non-vegetation targets had SIF values close to 0 mW m-2 sr-1 nm-1, whereas vegetation targets had a mean F687 of 1.13 and F760 of 1.96 mW m-2 sr-1 nm-1 from the SFM method. HyScreen showed good performance for SIF retrievals at both F687 and F760; nevertheless, we recommend further adaptations to correct for the effects of noise, varying illumination and sensor optics. In conclusion, due to its high spatial resolution, Hyscreen is a promising tool for investigating the relationship between leafs and TOC SIF as well as their relationship with plants' photosynthetic capacity.

Assessment of the Effect of Soil Sample Preparation, Water Content and Excitation Time on Proximal X-ray Fluorescence Sensing.

X-ray fluorescence (XRF) spectroscopy offers a fast and efficient method for analysing soil elemental composition, both in the laboratory and the field. However, the technique is sensitive to spectral interference as well as physical and chemical matrix effects, which can reduce the precision of the measurements. We systematically assessed the XRF technique under different sample preparations, water contents, and excitation times. Four different soil samples were used as blocks in a three-way factorial experiment, with three sample preparations (natural aggregates, ground to ≤2 mm and ≤1 mm), three gravimetric water contents (air-dry, 10% and 20%), and three excitation times (15, 30 and 60 s). The XRF spectra were recorded and gave 540 spectra in all. Elemental peaks for Si, K, Ca, Ti, Fe and Cu were identified for analysis. We used analysis of variance (anova) with post hoc tests to identify significant differences between our factors and used the intensity and area of the elemental peaks as the response. Our results indicate that all of these factors significantly affect the XRF spectrum, but longer excitation times appear to be more defined. In most cases, no significant difference was found between air-dry and 10% water content. Moisture has no apparent effect on coarse samples unless ground to 1 mm. We suggested that the XRF measurements that take 60 s from dry samples or only slightly moist ones might be an optimum option under field conditions.

Peatlands spectral data influence in global spectral modelling of soil organic carbon and total nitrogen using visible-near-infrared spectroscopy.

Peatlands ecosystem is one of the largest global terrestrial carbon pools. However, there is a shortness of its characterisation and information through new proximal sensing approaches. The visible and near-infrared spectroscopy is an inexpensive, quick, non-evasive, proximal sensing and low-cost analysis employed in field and/or laboratory. Despite that, there is another current issue in using this tool for creating global models, which is how it can retrieve local characteristics such as soil organic carbon (SOC) and total nitrogen (TN) in peatlands ecosystems. The aims in this study were to: (i) create a local model for quantifying SOC and TN finding the best pre-processing and machine learning methods in peatlands ecosystem, and (ii) evaluate the contribution of SOC and TN data collected in that ecosystem to global models in European Union. The hypothesis was that the SOC and TN data sampled in peatlands ecosystem can improve analytical quantification of those soil properties. The soil and spectral datasets were retrieved from the Land Use/Cover Area frame Statistical Survey with 21,771 observations at 0-20 cm depth and 63 soil cores in a degraded peatland in Germany with 262 observations up to 2 m depth. We evaluated three spectral pre-processing techniques with the Partial Least Square Regression (PLSR), Random Forest (RF), and Cubist machine learning algorithms. The best pre-processing technique was achieved applying Savitzky-Golay smoothing with a window size of 71 points, 2nd order polynomial, and zero derivative with Cubist algorithm for both SOC and TN predictions. Furthermore, merging the local with global data for global modelling demonstrated to improve SOC and TN predictions because of the local data representativeness and quality. Therefore, the SOC and TN data sampled in peatlands ecosystem can improve quantification of those soil properties in field and laboratory, which are crucial proxies for GHG emissions and climate change.

Monitoring water transparency, total suspended matter and the beam attenuation coefficient in inland water using innovative ground-based proximal sensing technology.

Long-term and high-frequency observations are vital to reveal water quality dynamics and responses to climate change and human activities. However, the datasets collected from traditional in situ and satellite observations may miss the rapid dynamics of water quality in the short term due to low temporal-spatial monitoring frequency and cloudy or rainy weather. To address this shortage, innovative ground-based proximal sensing (GBPS) technology was proposed to monitor water quality and identify emergencies with a wavelength range of 400-1000 nm, a spectral resolution of 1 nm and a minimal observation interval of 30 s. The GBPS was equipped with a hyperspectral imager placed 4-5 m above the water surface to minimize the impacts of the atmosphere and clouds. In this study, combined with 583 water samples obtained from four field samplings, GBPS datasets were first applied to estimate the total suspended matter (TSM), Secchi disk depth (SDD) and beam attenuation coefficient at 550 nm (C(550)) in Taihu Lake (TL), Liangxi River (LR) and Funchunjiang Reservoir (FR). The results demonstrated good performance with the TSM (R2 = 0.83, RMSE = 8.35 mg/L, MAPE = 24.0%), SDD (R2 = 0.88, RMSE = 0.09 m, MAPE = 14.7%), and C(550) (R2 = 0.79, RMSE = 3.55 m-1, MAPE = 35.8%). The time series of TSM and C(550) at the second-minute level showed consistent changes, but they were opposite to those of SDD. Taking TSM as an example, the datasets captured two mutations in TL with an 853.6% increase in 65 min and a rapid change from 40.3 mg/L to 256.9 mg/L and then to 51.0 mg/L in 224 min on November 1 and 3, respectively. Meanwhile, a significant decreasing trend (r = -0.83, p < 0.01) in LR from November 7 to 9 and a periodic diurnal increasing trend of TSM in FR during November 11 to 13 (0.46 ≤ R2 ≤ 0.70, p < 0.01) were observed. GBPS, with the advantages of high-frequency observations and the applicability of complex weather conditions, compensates for the in situ, aircraft and satellite observation deficiencies. Therefore, GBPS allows us to capture more detailed water quality information and episodic events, which is an important part of an integrated air-space-ground monitoring system in the future.

Evaluation of Minimum Preparation Sampling Strategies for Sugarcane Quality Prediction by vis-NIR Spectroscopy.

Proximal sensing for assessing sugarcane quality information during harvest can be affected by various factors, including the type of sample preparation. The objective of this study was to determine the best sugarcane sample type and analyze the spectral response for the prediction of quality parameters of sugarcane from visible and near-infrared (vis-NIR) spectroscopy. The sampling and spectral data acquisition were performed during the analysis of samples by conventional methods in a sugar mill laboratory. Samples of billets were collected and four modes of scanning and sample preparation were evaluated: outer-surface ('skin') (SS), cross-sectional scanning (CSS), defibrated cane (DF), and raw juice (RJ) to analyze the parameters soluble solids content (Brix), saccharose (Pol), fibre, pol of cane and total recoverable sugars (TRS). Predictive models based on Partial Least Square Regression (PLSR) were built with the vis-NIR spectral measurements. There was no significant difference (p-value > 0.05) between the accuracy SS and CSS samples compared to DF and RJ samples for all prediction models. However, DF samples presented the best predictive performance values for the main sugarcane quality parameters, and required only minimal sample preparation. The results contribute to advancing the development of on-board quality monitoring in sugarcane, indicating better sampling strategies.

Sensing Architecture for Terrestrial Crop Monitoring: Harvesting Data as an Asset.

Very often, the root of problems found to produce food sustainably, as well as the origin of many environmental issues, derive from making decisions with unreliable or inexistent data. Data-driven agriculture has emerged as a way to palliate the lack of meaningful information when taking critical steps in the field. However, many decisive parameters still require manual measurements and proximity to the target, which results in the typical undersampling that impedes statistical significance and the application of AI techniques that rely on massive data. To invert this trend, and simultaneously combine crop proximity with massive sampling, a sensing architecture for automating crop scouting from ground vehicles is proposed. At present, there are no clear guidelines of how monitoring vehicles must be configured for optimally tracking crop parameters at high resolution. This paper structures the architecture for such vehicles in four subsystems, examines the most common components for each subsystem, and delves into their interactions for an efficient delivery of high-density field data from initial acquisition to final recommendation. Its main advantages rest on the real time generation of crop maps that blend the global positioning of canopy location, some of their agronomical traits, and the precise monitoring of the ambient conditions surrounding such canopies. As a use case, the envisioned architecture was embodied in an autonomous robot to automatically sort two harvesting zones of a commercial vineyard to produce two wines of dissimilar characteristics. The information contained in the maps delivered by the robot may help growers systematically apply differential harvesting, evidencing the suitability of the proposed architecture for massive monitoring and subsequent data-driven actuation. While many crop parameters still cannot be measured non-invasively, the availability of novel sensors is continually growing; to benefit from them, an efficient and trustable sensing architecture becomes indispensable.

Plot-level rapid screening for photosynthetic parameters using proximal hyperspectral imaging.

Photosynthesis is currently measured using time-laborious and/or destructive methods which slows research and breeding efforts to identify crop germplasm with higher photosynthetic capacities. We present a plot-level screening tool for quantification of photosynthetic parameters and pigment contents that utilizes hyperspectral reflectance from sunlit leaf pixels collected from a plot (~2 m×2 m) in <1 min. Using field-grown Nicotiana tabacum with genetically altered photosynthetic pathways over two growing seasons (2017 and 2018), we built predictive models for eight photosynthetic parameters and pigment traits. Using partial least squares regression (PLSR) analysis of plot-level sunlit vegetative reflectance pixels from a single visible near infra-red (VNIR) (400-900 nm) hyperspectral camera, we predict maximum carboxylation rate of Rubisco (Vc,max, R2=0.79) maximum electron transport rate in given conditions (J1800, R2=0.59), maximal light-saturated photosynthesis (Pmax, R2=0.54), chlorophyll content (R2=0.87), the Chl a/b ratio (R2=0.63), carbon content (R2=0.47), and nitrogen content (R2=0.49). Model predictions did not improve when using two cameras spanning 400-1800 nm, suggesting a robust, widely applicable and more 'cost-effective' pipeline requiring only a single VNIR camera. The analysis pipeline and methods can be used in any cropping system with modified species-specific PLSR analysis to offer a high-throughput field phenotyping screening for germplasm with improved photosynthetic performance in field trials.

On-Ground Vineyard Reconstruction Using a LiDAR-Based Automated System.

Crop 3D modeling allows site-specific management at different crop stages. In recent years, light detection and ranging (LiDAR) sensors have been widely used for gathering information about plant architecture to extract biophysical parameters for decision-making programs. The study reconstructed vineyard crops using light detection and ranging (LiDAR) technology. Its accuracy and performance were assessed for vineyard crop characterization using distance measurements, aiming to obtain a 3D reconstruction. A LiDAR sensor was installed on-board a mobile platform equipped with an RTK-GNSS receiver for crop 2D scanning. The LiDAR system consisted of a 2D time-of-flight sensor, a gimbal connecting the device to the structure, and an RTK-GPS to record the sensor data position. The LiDAR sensor was facing downwards installed on-board an electric platform. It scans in planes perpendicular to the travel direction. Measurements of distance between the LiDAR and the vineyards had a high spatial resolution, providing high-density 3D point clouds. The 3D point cloud was obtained containing all the points where the laser beam impacted. The fusion of LiDAR impacts and the positions of each associated to the RTK-GPS allowed the creation of the 3D structure. Although point clouds were already filtered, discarding points out of the study area, the branch volume cannot be directly calculated, since it turns into a 3D solid cluster that encloses a volume. To obtain the 3D object surface, and therefore to be able to calculate the volume enclosed by this surface, a suitable alpha shape was generated as an outline that envelops the outer points of the point cloud. The 3D scenes were obtained during the winter season when only branches were present and defoliated. The models were used to extract information related to height and branch volume. These models might be used for automatic pruning or relating this parameter to evaluate the future yield at each location. The 3D map was correlated with ground truth, which was manually determined, pruning the remaining weight. The number of scans by LiDAR influenced the relationship with the actual biomass measurements and had a significant effect on the treatments. A positive linear fit was obtained for the comparison between actual dry biomass and LiDAR volume. The influence of individual treatments was of low significance. The results showed strong correlations with actual values of biomass and volume with R2 = 0.75, and when comparing LiDAR scans with weight, the R2 rose up to 0.85. The obtained values show that this LiDAR technique is also valid for branch reconstruction with great advantages over other types of non-contact ranging sensors, regarding a high sampling resolution and high sampling rates. Even narrow branches were properly detected, which demonstrates the accuracy of the system working on difficult scenarios such as defoliated crops.

Rapid On-Site Phenotyping via Field Fluorimeter Detects Differences in Photosynthetic Performance in a Hybrid-Parent Barley Germplasm Set.

Crop productivity can be expressed as the product of the amount of radiation intercepted, radiation use efficiency and harvest index. Genetic variation for components of radiation use efficiency has rarely been explored due to the lack of appropriate equipment to determine parameters at the scale needed in plant breeding. On the other hand, responses of the photosynthetic apparatus to environmental conditions have not been extensively investigated under field conditions, due to the challenges posed by the fluctuating environmental conditions. This study applies a rapid, low-cost, and reliable high-throughput phenotyping tool to explore genotypic variation for photosynthetic performance of a set of hybrid barleys and their parents under mild water-stress and unstressed field conditions. We found differences among the genotypic sets that are relevant for plant breeders and geneticists. Hybrids showed lower leaf temperature differential and higher non-photochemical quenching, resembling closer the male parents. The combination of traits detected in hybrids seems favorable, and could indicate improved photoprotection and better fitness under stress conditions. Additionally, we proved the potential of a low-cost, field-based phenotyping equipment to be used routinely in barley breeding programs for early screening for stress tolerance.

Towards Low-Cost Hyperspectral Single-Pixel Imaging for Plant Phenotyping.

Hyperspectral imaging techniques have been expanding considerably in recent years. The cost of current solutions is decreasing, but these high-end technologies are not yet available for moderate to low-cost outdoor and indoor applications. We have used some of the latest compressive sensing methods with a single-pixel imaging setup. Projected patterns were generated on Fourier basis, which is well-known for its properties and reduction of acquisition and calculation times. A low-cost, moderate-flow prototype was developed and studied in the laboratory, which has made it possible to obtain metrologically validated reflectance measurements using a minimal computational workload. From these measurements, it was possible to discriminate plant species from the rest of a scene and to identify biologically contrasted areas within a leaf. This prototype gives access to easy-to-use phenotyping and teaching tools at very low-cost.