Comparative efficacy and safety of medical treatments for proximal humerus fractures: a systematic review and network meta-analysis.

BACKGROUND: Various surgical techniques and conservative therapies are useful tools for treating proximal humerus fractures (PHFs), but it is important to understand how to properly utilize them. Therefore, we performed a systematic review and network meta-analysis to compare and rank the efficacy and safety of medical treatments for PHF. METHODS: PubMed, Embase, the Cochrane Library, and the ClinicalTrials.gov databases were systematically searched for eligible randomized controlled trials (RCTs) from inception until June 2022. Conservative therapy-controlled or head-to-head RCTs of open reduction internal fixation (ORIF), intramedullary nailing (IMN), hemiarthroplasty (HA), and reverse total shoulder arthroplasty (RTSA) used for the treatment of adult patients with PHF were included. The surface under the cumulative ranking (SUCRA) probabilities were applied to compare and rank the effects of medical treatments for PHF. RESULTS: Eighteen RCTs involving 1,182 patients with PHF were selected for the final analysis. Mostly baseline characteristics among groups were well balanced, and the imbalanced factors only included age, injury type, medial comminution, blood loss, and cognitive function in single trial. The SUCRA probabilities found that RTSA provided the best effect on the Constant-Murley score (SUCRA: 100.0%), and the disabilities of the arm, shoulder and hand (DASH) score (SUCRA: 99.0%). Moreover, HA (SUCRA: 85.5%) and RTSA (SUCRA: 68.0%) had a relatively better effect on health-related quality of life than the other treatment modalities. Furthermore, conservative therapy (SUCRA: 84.3%) and RTSA (SUCRA: 80.7%) were associated with a lower risk of secondary surgery. Finally, the best effects on the risk of complications are varied, including infection was observed with conservative therapy (SUCRA: 94.2%); avascular necrosis was observed in HA (SUCRA: 78.1%), nonunion was observed in RTSA (SUCRA: 69.6%), and osteoarthritis was observed in HA (SUCRA: 93.9%). CONCLUSIONS: This study found that RTSA was associated with better functional outcomes, while the comparative outcomes of secondary surgery and complications varied. Optimal treatment for PHF should consider patient-specific factors.

Complications after Reverse Total Shoulder Arthroplasty in the Korean Population: A Single Center Study of 299 Cases.

BACKGROUND: Knowledge regarding differences in the order of frequency of complications after reverse total shoulder arthroplasty (RTSA) between Asian and Western populations is limited. We therefore asked for (1) What is the order of frequency of complications after primary RTSA in the Korean population? (2) What are the rates of complication, reoperation, and revision, and clinical outcomes after index surgery? METHODS: We retrospectively reviewed the 299 consecutive cases who underwent primary RTSA with more than 1 year of follow-up over a period of 12 years. The mean age of the patients was 73.4 years (range, 58-88 years) and the mean follow-up period was 3.8 years (range, 1-11.5 years). Evaluation of the clinical outcomes, complications, and reinterventions was performed at the final follow-up. RESULTS: The mean VAS pain score, UCLA score, ASES score, and SSV improved from 6.7, 10.2, 30.7, and 27.7% before RTSA to 1.4, 26.4, 80.5, 77.2% after RTSA, respectively (P < .001). Overall, 45 complications (15.1%) were observed in 44 patients. The order of frequency of complications was as follows: 16 cases of scapular stress fracture (5.4%), 9 intraoperative or postoperative periprosthetic fracture (3.0%), 6 brachial plexus injury (2.0%), 4 instability (1.3%), 2 glenoid loosening (0.7%), 2 glenoid disassembly (0.7%), 2 periprosthetic joint infection (0.7%), 1 glenoid fixation failure (0.3%), 1 humeral stem fixation failure (0.3%), 1 hematoma (0.3%), and 1 complex regional pain syndrome (0.3%). Reintervention was performed in 15 cases (5.0%) including reoperation (8 cases; 2.7%) and revision surgery (7 cases; 2.3%). CONCLUSION: At a mean follow-up period of 3.8 years, primary RTSA showed satisfactory clinical outcomes with a complication rate of 15.1%, a reoperation rate of 2.7%, and a revision rate of 2.3%. Scapular stress fracture appears to be the most common complication after RTSA in the Korean population.

The effect of lateralization and distalization after Grammont-style reverse total shoulder arthroplasty.

BACKGROUND: The purpose of this study was to evaluate the relationship between multiple radiographic measures of lateralization and distalization and clinical outcome scores after a reverse total shoulder arthroplasty (RTSA). METHODS: We retrospectively evaluated all RTSAs performed by the senior author between January 1, 2007, and November 1, 2017. We then evaluated the visual analog scale for pain (VAS pain), Simple Shoulder Test (SST), and American Shoulder and Elbow Surgeons (ASES) scores and complication and reoperation rates at a minimum of 2-year follow-up. We measured preoperative and postoperative (2-week) radiographs for the lateralization shoulder angle (LSA), the distalization shoulder angle (DSA), lateral humeral offset, and the distance from the glenoid to the lateral aspect of the greater tuberosity. A multivariable analysis was performed to evaluate the effect of the postoperative radiographic measurements on final patient-reported outcomes (ASES scores, SST, and VAS pain). RESULTS: The cohort included 216 shoulders from unique patients who had patient-reported outcome scores available at a minimum of 2-year follow-up (average, 4.0 ± 1.9 years) for a total follow-up rate of 70%. In the multivariable models, more lateralization (LSA) was associated with worse final ASES scores -0.52 (95% confidence interval [CI]: -0.88, -0.17; P = .004), and more distalization (DSA) was associated with better final ASES scores 0.40 (95% CI: 0.11, 0.69; P = .007). More lateralization (LSA) was associated with worse final SST scores -0.06 (95% CI: -0.11, -0.003; P = .039). Finally, greater distalization (DSA) was associated with lower final VAS pain scores, ratio = 0.98 (95% CI: 0.96, 1.00; P = .021). CONCLUSIONS: Greater distalization and less lateralization are associated with better function and less pain after a Grammont-style RTSA. When using a Grammont-style implant, remaining consistent with Grammont's principles of implant placement will afford better final clinical outcomes.

Isolated humeral distalization in reverse total shoulder arthroplasty: a biorobotic shoulder simulator study.

BACKGROUND: Humeral distalization is inherent to reverse total shoulder arthroplasty (rTSA) and is often produced with concomitant humeral lateralization via the level of the humeral head cut, implant positioning, implant neck shaft angle, and polymer insert thickness. Biomechanical data on the isolated effects of humeral distalization remain limited but could be important to consider when optimizing postoperative rTSA shoulder function. This study investigated the effects of isolated humeral distalization on shoulder biomechanics using a biorobotic shoulder simulator. METHODS: Eight fresh-frozen cadaveric shoulders were tested using custom polymer inserts that translated the bearing surface 0, +5, +10, and +15 mm along the humeral stem axis, producing isolated distalization without lateralization. Specimens underwent passive elevation in the scapular plane with a static scapula to assess glenohumeral range of motion. Scapular plane abduction motion trajectories were then performed, driven by previously collected scapulothoracic and glenohumeral kinematics from rTSA patients. The effect of isolated distalization on passive elevation was tested using mixed-effects linear regression and the effect on muscle force, joint reaction force, and muscle excursion during active scapular-plane abduction was tested using statistical parametric mapping random effects analysis. RESULTS: Maximum passive scapular plane elevation increased with humeral distalization (4° per 5 mm distalization). During active elevation, deltoid and rotator cuff muscle forces, and joint reaction forces, increased up to 37% per 5 mm of distalization. Simulated deltoid muscle excursion was altered with increasing distalization but amounted to no more than 0.8 mm change from baseline per 5 mm of distalization. Rotator cuff muscles were consistently lengthened throughout abduction, up to 1.6 mm per 5 mm of distalization. These trends were observed across various patient motions. CONCLUSIONS: Isolated humeral distalization caused dramatic increases in the muscle forces required to perform scapular-plane abduction. Joint reaction forces increased correspondingly. These results suggest that implant and surgical strategies to generate deltoid muscle tension without humeral distalization may promote better active range of motion and more durable long-term outcomes over approaches that rely on distalization.

Managing rotator cuff tear arthropathy: a role for cuff tear arthropathy hemiarthroplasty as well as reverse total shoulder arthroplasty.

BACKGROUND: Disabling cuff tear arthropathy (CTA) is commonly managed with reverse shoulder arthroplasty (RSA). However, for patients with CTA having preserved active elevation, cuff tear arthropathy hemiarthroplasty (CTAH) may offer a cost-effective alternative that avoids the complications unique to RSA. We sought to determine the characteristics and outcomes of a series of patients with CTA managed with these procedures. MATERIALS AND METHODS: We retrospectively reviewed 103 patients with CTA treated with shoulder arthroplasty, the type of which was determined by the patient's ability to actively elevate the arm. Outcome measures included the change in the Simple Shoulder Test (SST), the percent maximum improvement in SST (%MPI), and the percentage of patients exceeding the minimal clinically important difference for the change in SST and %MPI. Postoperative x-rays were evaluated to assess the positions of the center of rotation and the greater tuberosity for each implant. RESULTS: Forty-four percent of the 103 patients were managed with CTAH while 56% were managed with RSA. Both arthroplasties resulted in clinically significant improvement. Patients having RSA improved from a mean preoperative SST score of 1.7 (interquartile range [IQR], 0.0-3.0) to a postoperative score of 6.3 (IQR, 2.3-10.0) (P < .01). Patients having CTAH improved from a preoperative SST score of 3.1 (IQR, 1.0-4.0) to a postoperative score of 7.6 (IQR, 5.0-10.) (P < .001). These improvements exceeded the minimal clinically important difference. Instability accounted for most of the RSA complications; however, it did not account for any CTAH complications. The postoperative position of the center of rotation and greater tuberosity on anteroposterior radiographs did not correlate with the clinical outcomes for either procedure. CONCLUSION: For 103 patients with CTA, clinically significant improvement was achieved with appropriately indicated CTAH and RSA. In view of the lower cost of the CTAH implant, it may provide a cost-effective alternative to RSA for patients with retained active elevation.

Trends in the treatment of proximal humerus fractures from 2010 to 2020.

BACKGROUND: The incidence of proximal humerus fractures (PHF) is continuing to rise due to shifts towards a more aged population as well as advancements in surgical treatment options. The purpose of this study is to examine and compare trends in the treatment of PHFs (nonoperative vs. operative; different surgical treatments) across different age groups over the last decade (2010-2020). METHODS: The New York Statewide Planning and Research Cooperative System (SPARCS) database was queried using International Classification of Diseases and Current Procedural Terminology codes to identify all patients presenting with or undergoing surgery for PHF between 2010 and 2020. Treatment trends, demographics, and insurance information were analyzed during the study period. Comparisons were made between operative and nonoperative trends with respect to the number and type of surgeries performed among 3 age groups: ≤49 years, 50-64 years, and ≥65 years. The rate of postoperative complications and reoperations was evaluated and compared among different surgical treatments for patients with a minimum 1-year postoperative follow-up. RESULTS: A total of 92,308 patients with a mean age of 67.8 ± 16.8 years were included. Over the last decade, there was no significant increase in the percentage of PHFs treated with surgery. A total of 15,523 PHFs (16.82%) were treated operatively, and these patients, compared with the nonoperative cohort, were younger (64.9 years vs. 68.4 years, P < .001), more likely to be White (80.2% vs. 74.7%, P < .001), and more likely to have private insurance (41.4% vs. 32.0%, P < .001). For patients ≤49 years old, trends in operative treatment have remained stable with internal fixation (IF) as the most used surgical modality. For patients 50-64 years old, we observed a gradual decline in the use of hemiarthroplasty (HA), with a corresponding increase in the use of reverse total shoulder arthroplasty (rTSA), but IF continued to be the most used operative modality. In patients over 65 years, a steep decline in the use of IF and HA was noted during the first half of the decade along with a significant exponential increase in the use of rTSA, which surpassed the use of IF in 2019. Despite the increase in the use of rTSA, no differences in rate of surgical complications were noted between rTSA and IF (χ2 = 0.245, P = .621) or reoperations (χ2 = 0.112, P = .730). CONCLUSION: Nonsurgical treatment remains the mainstay treatment of PHFs. Although there is no increase in the prevalence of operative treatment in patients ≥50 years in the last decade, there is an exponential increase in the use of rTSA with a corresponding decrease in HA and IF, a trend more substantial in patients ≥65 years compared with patients between 50 and 64 years.

Glenoid structural bone grafting in reverse total shoulder arthroplasty: clinical and radiographic outcomes.

BACKGROUND: Current options for reconstruction of large glenoid defects in reverse total shoulder arthroplasty (RTSA) include structural bone grafting, use of augmented components, or 3D-printed custom implants. Given the paucity in the literature on structural bone grafts in RTSA, this study reflects our experience on clinical and radiographic outcomes of structural bone grafts used for glenoid defects in RTSA. METHODS: We identified 33 consecutive patients who underwent RTSA using structural bone grafts for glenoid bone loss between 2008 and 2019. Twenty-six patients with a mean clinical follow-up of 4.4 ± 3.9 years and a mean radiographic follow-up of 2.7 ± 3.2 years were included. Patient demographic data, perioperative functional outcomes, radiographic outcomes, complications, and reoperation rates were determined. RESULTS: Between 2008 and 2019, 26 RTSAs were performed using structural autograft or allograft for glenoid defects. There were 20 females (77%) and 6 males (23%), with a mean presenting age of 68 years (range 41-86), mean BMI of 29 (range 21-44), and mean Charlson Comorbidity Index of 3 (range 0-8). There were 19 cases of central glenoid defects, and 7 were combined central and peripheral defects. Structural grafts included humeral head autograft (7), proximal humerus autograft (7), iliac crest autograft (7), distal clavicle autograft (2), and femoral head allograft (3). All 18 revision RTSA cases had simultaneous humeral-sided revision. There was significant postoperative improvement in American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form scores (27.0 ± 12.6 preoperation vs. 59.8 ± 24.1 postoperation; P < .001) and visual analog scale scores (8.1 ± 3.6 preoperation vs. 3.0 ± 3.2 postoperation; P < .001). Range of motion improved significantly for active forward elevation (63° ± 36° preoperation vs. 104° ± 36° postoperation; P < .001) and external rotation (21° ± 20° preoperation vs. 32° ± 23° postoperation, P = .036). Eighty-eight percent of cases (23 of 26) had successful reconstruction of the glenoid, defined as no visible radiolucent lines nor glenoid component migration at final follow-up. The reoperation rate was 19% (5 of 26). Postoperative complications included 2 cases of acromial stress fractures that were treated nonoperatively, for a total complication rate (including reoperation) of 27% (7 of 26 cases). CONCLUSIONS: The use of structural bone autografts and allografts in RTSA was associated with improved outcome scores and range of motion. A reoperation rate of 19% and total complication rate of 27% were reported for these challenging cases. However, 86% of these complications were not related to structural glenoid reconstruction failure. Structural grafts are a reasonable option for glenoid reconstruction in RTSA cases with glenoid bone loss.

The relationship between design-based lateralization, humeral bearing design, polyethylene angle, and patient-related factors on surgical complications after reverse shoulder arthroplasty: a machine learning analysis.

BACKGROUND: Technological advancements in implant design and surgical technique have focused on diminishing complications and optimizing performance of reverse shoulder arthroplasty (rTSA). Despite this, there remains a paucity of literature correlating prosthetic features and clinical outcomes. This investigation utilized a machine learning approach to evaluate the effect of select implant design features and patient-related factors on surgical complications after rTSA. METHODS: Over a 16-year period (2004-2020), all primary rTSA performed at a single institution for elective and traumatic indications with a minimum follow-up of 2 years were identified. Parameters related to implant design evaluated in this study included inlay vs. onlay humeral bearing design, glenoid lateralization (medialized or lateralized), humeral lateralization (medialized, minimally lateralized, or lateralized), global lateralization (medialized, minimally lateralized, lateralized, highly lateralized, or very highly lateralized), stem to metallic bearing neck shaft angle, and polyethylene neck shaft angle. Machine learning models predicting surgical complications were constructed for each patient and Shapley additive explanation values were calculated to quantify feature importance. RESULTS: A total of 3837 rTSA were identified, of which 472 (12.3%) experienced a surgical complication. Those experiencing a surgical complication were more likely to be current smokers (Odds ratio [OR] = 1.71; P = .003), have prior surgery (OR = 1.60; P < .001), have an underlying diagnosis of sequalae of instability (OR = 4.59; P < .001) or nonunion (OR = 3.09; P < .001), and required longer OR times (98 vs. 86 minutes; P < .001). Notable implant design features at an increased odds for complications included an inlay humeral component (OR = 1.67; P < .001), medialized glenoid (OR = 1.43; P = .001), medialized humerus (OR = 1.48; P = .004), a minimally lateralized global construct (OR = 1.51; P < .001), and glenohumeral constructs consisting of a medialized glenoid and minimally lateralized humerus (OR = 1.59; P < .001), and a lateralized glenoid and medialized humerus (OR = 2.68; P < .001). Based on patient- and implant-specific features, the machine learning model predicted complications after rTSA with an area under the receiver operating characteristic curve of 0.61. CONCLUSIONS: This study demonstrated that patient-specific risk factors had a more substantial effect than implant design configurations on the predictive ability of a machine learning model on surgical complications after rTSA. However, certain implant features appeared to be associated with a higher odd of surgical complications.

Scapulothoracic orientation has a significant influence on the clinical outcome after reverse total shoulder arthroplasty.

BACKGROUND: Computer simulation has indicated a significant effect of scapulothoracic orientation and posture on range of motion (ROM) after reverse total shoulder arthroplasty (RTSA). We analyzed this putative effect on the clinical and radiologic outcome post-RTSA. METHODS: We retrospectively assessed 2-year follow-up data of RTSA patients treated at our clinic between 2008 and 2019. Patients were categorized into posture types A, B, and C based on an established method using scapular internal rotation on preoperative cross-sectional imaging. We compared differences in clinical ROM, pain, Subjective Shoulder Value, Constant Score, Shoulder Pain and Disability Index (SPADI), quality of life (EuroQol-5 Dimensions-5 Level utility index), and radiologic outcomes between posture types using linear regression analyses. RESULTS: Of 681 included patients, 225 had type A posture, 326 type B, and 130 type C. Baseline group characteristics were comparable, although the type C group had a higher proportion of females (60% [A], 64% [B], 80% [C]) with lower abduction strength (0.7 kg [A], 0.6 kg [B], 0.3 kg [C]) and a slightly higher proportion with a Grammont design RTSA (41% [A], 48% [B], 54% [C]). There were significant adjusted differences in mean (±standard deviation) active flexion (A: 137° ± 21°; B: 136° ± 20°; C: 131° ± 19°) and passive flexion (A: 140° ± 19°; B: 138° ± 19°; C: 134° ± 18°), active (A: 127° ± 26°; B: 125° ± 26°; C: 117° ± 27°) and passive abduction (A: 129° ± 24°; B: 128° ± 25°; C: 121° ± 25°), SPADI (A: 81 ± 18; B: 79 ± 20; C: 73 ± 23), and pain (A: 1.2 ± 1.7; B: 1.6 ± 2.2; C: 1.8 ± 2.4) between posture types at 2 years (P ≤ .035). A higher distalization shoulder angle was associated with better abduction in type C patients (P = .016). Type C patients showed a trend toward a higher complication rate (3.9% vs. 1.1% [A], 3.2% [B]) (P = .067). CONCLUSIONS: Type C posture influences the 2-year clinical outcome of RTSA patients in terms of worse flexion, abduction, SPADI, and pain. Scapulothoracic orientation and posture should be considered during the patient selection process, preoperative planning, and implantation of an RTSA.

Anatomic or Reverse Total Shoulder Arthroplasty? How Fellowship Training Affects Selection of Arthroplasty Type.

BACKGROUND: While both anatomic (ATSA) and reverse total shoulder arthroplasty (RTSA) have been popularized as a means of treating individuals with degenerative shoulder conditions, the indications for each can vary widely amongst providers. While surgeons with differing fellowship training commonly perform these procedures, it is not understood how fellowship training influences choice of implant. METHODS: A national database was queried to identify surgeons performing anatomic and reverse total shoulder arthroplasty. For all surgeons who performed more than 10 cases between 2010-2022, fellowship data was individually collected via online search. For each fellowship group, rates of anatomic and reverse total shoulder arthroplasty were identified using International Classification of Diseases (ICD) procedural codes. Those undergoing revision arthroplasty and those with a history of fracture, infection, or malignancy were excluded. Primary outcome measures included the proportion of primary and revision ATSA and RTSA by fellowship in addition to the rate of RTSA performed for a primary diagnosis of glenohumeral osteoarthritis. RESULTS: A total of 131,974 patients met the inclusion criteria and were retained for this study. RTSA increased from 50.1% of all primary shoulder arthroplasty cases in 2011 to 72.0% in 2022. After adjusting for age and comorbidities, Sports Medicine fellowship-trained (Sports) surgeons opted for primary RTSA over ATSA at a significantly higher rate than Shoulder and Elbow fellowship-trained (Shoulder) surgeons and surgeons who completed another type of fellowship or no fellowship (Other). Sports surgeons also chose RTSA more frequently for the diagnosis of glenohumeral osteoarthritis compared to Shoulder surgeons. Surgeons in the Other cohort were more likely to perform primary ATSA rather than RTSA in comparison to surgeons in the Shoulder and Sports cohorts. Sports surgeons were responsible for the greatest increase in percentage of all shoulder arthroplasty procedures from 2010-2022 (28.4% to 40.4%) while the Other group decreased by a comparable amount (45.9% to 32.4%) over the same period. CONCLUSION: Surgeons who have completed a Sports Medicine fellowship choose RTSA over ATSA at a higher rate than Shoulder and Elbow surgeons, both for all indications and also for a primary diagnosis of glenohumeral osteoarthritis. Those who have no fellowship training or fellowship training outside of Sports Medicine and Shoulder and Elbow surgery have the highest percentage of ATSA in their arthroplasty practice. Revision anatomic and revision reverse total shoulder arthroplasty represents a larger percentage of overall case volume for Shoulder and Elbow surgeons.

Adoption of reverse total shoulder arthroplasty for surgical treatment of proximal humerus fractures differs by patient race.

BACKGROUND: Reverse total shoulder arthroplasty (rTSA) has gained popularity for the operative treatment of proximal humerus fractures (PHF). The purpose of this study was to compare racial differences in surgical management of PHF between open reduction and internal fixation (ORIF), hemiarthroplasty, and rTSA. Our hypothesis was that there would be no difference in fixation by race. METHODS: The National Surgical Quality Improvement Program database was queried for ORIF, rTSA, and hemiarthroplasty between 2006 and 2020 for patients with a PHF. Race, ethnicity, age, sex, body mass index, and American Society of Anesthesiologists (ASA) class were recorded. Chi squared tests were performed to assess relationships between patient factors and operative intervention. Factors significant at the 0.10 level in univariable analyses were included in a multivariable multinomial model to predict operative intervention. RESULTS: Seven thousand four hundred ninety-nine patients underwent surgical treatment for a PHF, including 526 (7%) undergoing hemiarthroplasty, 5011 (67%) undergoing ORIF, and 1962 (26%) undergoing rTSA. 27% of white patients with PHF underwent rTSA compared to 21% of Black patients, 16% of Asian patients, and 14% of Native American and Alaskan Native patients (P < .001). In the multivariable analysis, utilization of rTSA increased over time (OR 1.2 per year since 2006, P < .001) and hemiarthroplasty decreased over time (OR 0.86 per year since 2006, P < .001). Non-White patients had significantly lower odds of undergoing rTSA vs. ORIF (OR 0.75, 95% CI 0.58-0.97), as did male patients (OR 0.77, 95% CI 0.66-0.88). Patients over 65 (OR 3.86, 95% CI 3.39-4.38), patients with higher ASA classifications (ASA2: OR 3.24, 95% CI 1.86-5.66, ASA3: OR 4.77, 95% CI 2.74-8.32, ASA4: OR 5.25, 95% CI 2.89-9.54), and patients who were overweight (OR 1.33, 95% CI 1.14-1.55) or obese (OR 1.52, 95% CI 1.32-1.75) had higher odds of undergoing rTSA vs. ORIF. DISCUSSION: As utilization of rTSA increases, understanding disparities in surgical treatment of PHF is crucial to improving outcomes and equitable access to emerging orthopedic technologies. While patient factors such as age, body mass index, and comorbidities are known to directly impact outcomes and thus may be predictive of the type of surgical intervention, patient race should not dictate treatment.

Postoperative assessment of the individualized humeral component retroversion in reverse total shoulder arthroplasty-a novel method applying CT scans without an elbow.

BACKGROUND: Humeral component retroversion (HcRV) can be customized to match native humeral retroversion (RV) during reverse total shoulder arthroplasty (RTSA). However, assessing postoperative individualized HcRV using computed tomography (CT) scans without an elbow can be challenging. Therefore, we developed a new method to obtain the HcRV and evaluated its reliability. METHODS: A total of 106 patients underwent RTSA using a single implant, in which the humeral component was implanted based on the preoperative humeral RV (Pre_HRV) using a bilateral CT scan of the elbow. Intraoperatively, a retroversion guide with version hole at 10° intervals was used; Pre_HRV was converted to 5° increments and applied for humeral component implantation. The axis of intertubercular sulcus (ITS) was defined as the line perpendicular to the intertubercular line, and the angle between the axis of ITS and the trans-epicondylar axis was defined as the bicipital groove rotation (BGR). ITS orientation was defined as the angle between the axis of ITS and the central axis of the humeral head. Since the BGR does not change, the postoperative implanted HcRV (Post_HcRV)f is calculated as the BGR minus the value of the postoperative ITS orientation. An agreement analysis was performed between Post_HcRV and both the intraoperatively applied humeral RV (I_HRV) and Pre_HRV, as well as between the pre- and postoperative ITS orientations. The humeral component's insertional errors were also evaluated. RESULTS: All radiologic measurements exhibited excellent inter- and intra-observer reliabilities. The reliabilities between Post_HcRV and both I_HRV and Pre_HRV, as well as between pre- and postoperative ITS orientations, showed excellent agreement (intraclass correlation coefficients: 0.953, 0.952, and 0.873, respectively). The humeral component was inserted within 5° in 86.8% of the planned humeral RV cases. CONCLUSIONS: The HcRV measured using the BGR and ITS orientations achieved good accuracy for restoring the planned humeral RV using a retroversion guide with the forearm axis. Therefore, this new radiological measurement method can aid orthopedic surgeons in confirming Post_HcRV on CT scans without an elbow.

Varus-valgus alignment of humeral short stem in reverse total shoulder arthroplasty: does it really matter?

BACKGROUND: The utilization of short humeral stems in reverse total shoulder arthroplasty has gained attention in recent times. However, concerns regarding the risk of misalignment during implant insertion are associated with their use. METHODS: Eight fresh-frozen cadaveric shoulders were prepared for dissection and biomechanical testing. A bespoke humeral implant was fabricated to facilitate assessment of neutral, varus, and valgus alignments using a single stem, and 10° was established as the maximum permissible angle for misalignments. Shift in humerus position and changes in deltoid length attributable to misalignments relative to the neutral position were evaluated using a Microscribe 3DLx system. The impingement-free range of motion, encompassing abduction, adduction, internal rotation, and external rotation (ER), was gauged using a digital goniometer. The capacity for abduction was evaluated at maximal abduction angles under successive loading on the middle deltoid. A specialized traction system coupled with a force transducer was employed to measure anterior dislocation forces. RESULTS: Relative to the neutral alignment, valgus alignment resulted in a more distal (10.5 ± 2.4 mm) and medial (8.3 ± 2.2 mm) translation of the humeral component, whereas the varus alignment resulted in the humerus shifting more superiorly (11.2 ± 1.3 mm) and laterally (9.9 ± 0.9 mm) at 0° abduction. The valgus alignment exhibited the highest abduction angle than neutral alignment (86.2°, P < .001). Conversely, the varus alignment demonstrated significantly higher adduction (18.4 ± 7.4°, P < .001), internal rotation (68.9 ± 15.0°, P = .014), and ER (45.2 ± 10.5°, P = .002) at 0° abduction compared to the neutral alignments. Anterior dislocation forces were considerably lower (23.8 N) in the varus group compared to the neutral group at 0°ER (P = .047). Additionally, abduction capability was markedly higher in varus alignment at low deltoid loads than the neutral alignment (5N, P = .009; 7.5 N, P = .007). CONCLUSIONS: The varus position enhances rotational range of motion (ROM) but increases instability, while the valgus position does not significantly impact ROM or instability compared to the neutral position.

Stratification of the minimal clinically important difference, substantial clinical benefit, and patient acceptable symptomatic state after total shoulder arthroplasty by implant type, preoperative diagnosis, and sex.

BACKGROUND: Clinical significance, as opposed to statistical significance, has increasingly been utilized to evaluate outcomes after total shoulder arthroplasty (TSA). The purpose of this study was to identify thresholds of the minimal clinically important difference (MCID), substantial clinical benefit (SCB), and patient acceptable symptomatic state (PASS) for TSA outcome metrics and determine if these thresholds are influenced by prosthesis type (anatomic or reverse TSA), sex, or preoperative diagnosis. METHODS: A prospectively collected international multicenter database inclusive of 38 surgeons was queried for patients receiving a primary aTSA or rTSA between 2003 and 2021. Prospectively, outcome metrics including ASES, shoulder function score (SFS), SST, UCLA, Constant, VAS Pain, shoulder arthroplasty smart (SAS) score, forward flexion, abduction, external rotation, and internal rotation was recorded preoperatively and at each follow-up. A patient satisfaction question was administered at each follow-up. Anchor-based MCID, SCB, and PASS were calculated as defined previously overall and according to implant type, preoperative diagnosis, and sex. The percentage of patients achieving thresholds was also quantified. RESULTS: A total of 5851 total shoulder arthroplasties (TSAs) including aTSA (n = 2236) and rTSA (n = 3615) were included in the study cohort. The following were identified as MCID thresholds for the overall (aTSA + rTSA irrespective of diagnosis or sex) cohort: VAS Pain (-1.5), SFS (1.2), SST (2.1), Constant (7.2), ASES (13.9), UCLA (8.2), SPADI (-21.5), and SAS (7.3), Abduction (13°), Forward elevation (16°), External rotation (4°), Internal rotation score (0.2). SCB thresholds for the overall cohort were: VAS Pain (-3.3), SFS (2.9), SST 3.8), Constant (18.9), ASES (33.1), UCLA (12.3), SPADI (-44.7), and SAS (18.2), Abduction (30°), Forward elevation (31°), External rotation (12°), Internal rotation score (0.9). PASS thresholds for the overall cohort were: VAS Pain (0.8), SFS (7.3), SST (9.2), Constant (64.2), ASES (79.5), UCLA (29.5), SPADI (24.7), and SAS (72.5), Abduction (104°), Forward elevation (130°), External rotation (30°), Internal rotation score (3.2). MCID, SCB, and PASS thresholds varied depending on preoperative diagnosis and sex. CONCLUSION: MCID, SCB, and PASS thresholds vary depending on implant type, preoperative diagnosis, and sex. A comprehensive understanding of these differences as well as identification of clinically relevant thresholds for legacy and novel metrics is essential to assist surgeons in evaluating their patient's outcomes, interpreting the literature, and counseling their patients preoperatively regarding expectations for improvement. Given that PASS thresholds are fragile and vary greatly depending on cohort variability, caution should be exercised in conflating them across different studies.

Lateralization of the humerus in reverse total shoulder arthroplasty: can preoperative planning software predict postoperative lateralization and does lateralization influence outcomes?

BACKGROUND: Reverse total shoulder arthroplasty (RTSA) can result in varying amounts of humeral medialization or lateralization. The amount of medial or lateral change-in-arm-position can be predicted using 3D computed tomography planning software. It is not clear if the preoperatively predicted change-in-arm-position correlates with the actual radiographically measured change-in-arm-position or if the predicted or actual change-in-arm-position correlates with patient-reported outcomes or complications. METHODS: Patients who received RTSA underwent preoperative 3D computed tomography planning to predict the postoperative medial-to-lateral change-in-arm-position (PCAP). Preoperative and postoperative radiographs were used to calculate the actual medial-to-lateral change-in-arm-position using the measurement of the lateral edge of the greater tuberosity to the lateral edge of the acromion (RCAP-LHO). The Western Ontario Osteoarthritis Score (WOOS), American Shoulder and Elbow Surgeons score (ASES), and Single Assessment Numeric Evaluation (SANE) were recorded at baseline, 1 year, and 2 years. Rates of complications were recorded. RESULTS: A total of 250 patients were eligible for this study including 189 patients reaching the 1-year clinical follow-up point and 144 patients reaching the 2-year clinical follow-up point. One-year and 2-year follow-up rates were 89% and 91%, respectively. The mean PCAP was 3 ± 5 mm and the mean RCAP-LHO was 1 ± 8 mm. There was a moderate correlation between PCAP and RCAP-LHO. There was a weak correlation between increased PCAP lateralization and higher WOOS and ASES at 2 years and an improvement from baseline to 2 years in WOOS. There was a very weak correlation between increased PCAP lateralization and improvement compared with baseline in 1-year SANE and improvement compared with baseline in 2-year SANE. There was a weak correlation between lateralized RCAP-LHO and 2-year postoperative SANE. There was superior 2-year WOOS, ASES, and SANE, and improvement in SANE at 1 year compared with baseline in patients with a lateralized PCAP compared with a medialized or neutral PCAP. There was superior 2-year WOOS, improvement in WOOS from baseline to 2-year follow-up, and 2-year SANE in patients with a lateralized RCAP-LHO compared with a medialized or neutral RCAP-LHO. Overall complication rates were similar between groups although the dislocation rate in shoulders with a lateralized change-in-arm-position was significantly less than that in shoulders with a medial or neutral change-in-arm-position. CONCLUSIONS: PCAP correlated with actual RCAP-LHO. Correlations exist with increased humeral lateralization and improved patient-determined outcomes. Patient-determined outcomes in patients with a lateralized change-in-arm-position were the same as or better than those with a medialized or neutral change-in-arm-position. A lateralized change-in-arm-position did not result in increased overall complications and was protective against postoperative instability.

Total shoulder arthroplasty in patients with factor V Leiden.

BACKGROUND: Anatomic and reverse total shoulder arthroplasty (TSA) are effective treatment options for end-stage glenohumeral osteoarthritis. However, consideration for pre-existing conditions must be taken into account. Factor V Leiden (FVL), the most common inherited thrombophilia, is one such condition that predisposes to a prothrombotic state and may affect perioperative and longer-term outcomes following TSA. METHODS: Adult patients undergoing primary TSA for osteoarthritis indication were identified in the 2010 through October 2021 PearlDiver M157 database. Patients with or without FVL were matched at a 1:4 ratio based on age, sex, and Elixhauser Comorbidity Index. Ninety-day adverse events and 5-year revision rates were assessed and compared with multivariable logistic regression and rank-log tests, respectively. Finally, the relative use and bleeding/clotting outcomes were assessed based on venous thromboembolic (VTE) prophylactic agents used, with categories defined as (1) warfarin, heparin, or direct oral anticoagulant (DOAC) or (2) aspirin/no prescription found. RESULTS: Of 104,258 TSA patients, FVL was identified for 283 (0.27%). Based on matching, 1081 patients without FVL and 272 patients with FVL were selected. Multivariable analyses demonstrated that those with FVL displayed independently greater odds ratios (ORs) of deep vein thrombosis (DVT, OR = 9.50, P < .0001), pulmonary embolism (PE, OR = 10.10, P < .0001), and pneumonia (OR = 2.43, P = .0019). Further, these events contributed to the increased odds of aggregated minor (OR = 1.95, P = .0001), serious (OR = 6.38, P < .0001), and all (OR = 3.51, P < .0001) adverse events. All other individual 90-day adverse events, as well as 5-year revision rates, were not different between the study groups. When compared to matched patients without FVL on the same anticoagulant agents, FVL patients on warfarin, heparin, or DOAC agents demonstrated lesser odds of 90-day DVT and PE (OR = 4.25, P < .0001, and OR = 2.54, P = .0065) than those on aspirin/no prescription found (OR = 7.64 and OR = 21.95, P < .0001 for both). Interestingly, those on VTE prophylactic agents were not at greater odds of bleeding complications (hematoma or transfusion). DISCUSSION AND CONCLUSIONS: TSA patients with FVL present a difficult challenge to shoulder reconstruction surgeons. The current study highlights the strong risk of VTE that was reduced but still significantly elevated for those with stronger classes of VTE chemoprophylaxis. Acknowledging this risk is important for surgical planning and patient counseling, but also noted was the reassurance of similar 5-year revision rates for those with vs. without FVL.

Predictors of poor and excellent outcomes following reverse shoulder arthroplasty for glenohumeral osteoarthritis with an intact rotator cuff.

BACKGROUND: As the indications for reverse total shoulder arthroplasty (RSA) continue to evolve, it has been more commonly utilized for the treatment of glenohumeral osteoarthritis with an intact rotator cuff (GHOA). Given the increased use of RSA for GHOA, it is important to identify factors influential of clinical outcomes. In this study, we sought to identify variables predictive of clinical outcomes following RSA for GHOA. METHODS: Patients undergoing primary RSA for GHOA between 2015 and 2020 were retrospectively identified through a prospectively maintained, single surgeon registry. Eligible patients had complete patient-reported outcome measures and range of motion measurements with a minimum 2-year follow-up. Univariate analysis was utilized to compare characteristics and outcome measures of patients with poor and excellent outcomes, which was defined as postoperative American Shoulder and Elbow Surgeons (ASES) scores in the bottom and top quartiles, respectively. Multivariate linear regression was performed to determine factors independently predictive of postoperative ASES score. RESULTS: A total of 230 patients were included with a mean follow-up of 33.4 months (SD 13.2). The mean age of the study population was 71.9 (SD 6.1). Two hundred twenty-four patients (97.4%) surpassed the minimal clinically important difference and 209 patients (90.1%) achieved substantial clinical benefit for ASES score. Preoperative factors differing between the poor and excellent outcome groups were sex (male: poor 37.9%, excellent 58.6%; P = .041), opioid use (poor 24.1%, excellent 5.2%; P = .009), ASES score (poor 32.9, excellent 41.0; P = .011), and forward elevation (poor 92°, excellent 101°; P = .030). Linear regression demonstrated that Walch B3 glenoids (ß 7.08; P = .010) and higher preoperative ASES scores (ß 0.14; P = .025) were predictors of higher postoperative ASES score, while postoperative complications (ß -18.66; P < .001) and preoperative opioid use (ß -11.88; P < .001) were predictive of lower postoperative ASES scores. CONCLUSION: Over 90% of patients who underwent RSA for GHOA with an intact rotator cuff experienced substantial clinical benefit. An unsurprising handful of factors were associated with postoperative clinical outcomes; higher preoperative ASES scores were slightly associated with higher postoperative ASES, whereas preoperative opioid use and postoperative complications were associated with lower postoperative ASES. Additionally, Walch glenoid type B3 was associated with higher postoperative ASES, indicating that patients with posterior glenoid defects are not predisposed to poor clinical outcomes following RSA. These results serve as a resource to improve preoperative patient counseling and manage postoperative expectations.

The variability of MCID, SCB, PASS, and MOI thresholds for PROMs in the reverse total shoulder arthroplasty literature: a systematic review.

BACKGROUND: Reverse total shoulder arthroplasty (RTSA) is a common procedure utilized to address degenerative pathologies of the glenohumeral joint and rotator cuff. Increased reliance on patient-reported outcome measures (PROMs) have placed emphasis on the utilization of the minimum clinically important difference (MCID), substantial clinical benefit (SCB), patient acceptable symptom state (PASS), and maximal outcome improvement (MOI) thresholds to assess the clinical efficacy of RTSA. In this study, we systematically reviewed the MCID, SCB, PASS, and MOI thresholds reported for PROMs following RTSA. METHODS: PubMed, Embase, MEDLINE, Cochrane Library, and Google Scholar were queried for articles from January 1, 2000 to August 31, 2023 reporting MCID, SCB, PASS, or MOI values for PROMs following RTSA. Patient demographic data, study characteristics, MCID/SCB/PASS/MOI thresholds, and threshold calculation methods were extracted. RESULTS: One hundred and forty-one articles were screened with 39 ultimately included, comprising 11,984 total patients that underwent RTSA. 34 (87%) studies reported MCID thresholds, 20 (51%) reported SCB, 5 (13%) reported PASS, and 2 (5%) reported MOI. 25/39 (64%) studies referenced a previous study when reporting MCID, SCB, PASS, or MOI values, 11 (28%) used an anchor-based method to calculate threshold values, 1 (3%) used a distribution-based method, and 2 (5%) used both anchor and distribution methods. There were 19 newly calculated MCID (11), SCB (5), PASS (1), and MOI (2) thresholds. For 5 of the 6 most utilized PROMs (ASES, SST, Constant, UCLA, and SPADI), the range of reported MCID values exceeded 50% of the most common threshold. For 3 of 6, the range of SCB values exceeded 25% of the most common threshold. CONCLUSION: There is substantial variability in the MCID and SCB threshold values reported in the RTSA literature. Standardizing the methodologic calculation and utilization of MCID, SCB, PASS, and MOI thresholds for RTSA may allow for improved assessment of PROMs.

Comparison of the clinical outcomes and temporal changes between superior capsular reconstruction and reverse total shoulder arthroplasty in patients with irreparable rotator cuff tear without osteoarthritic change.

BACKGROUND: Superior capsular reconstruction (SCR) and reverse total shoulder arthroplasty (rTSA) are widely performed in patients with irreparable rotator cuff tears, including pseudoparalytic shoulder (PPS), and have shown positive clinical outcomes. However, limited studies have compared these 2 in terms of functional recovery in patients with PPS without osteoarthritic change. Thus, this study aimed to compare the clinical outcomes and to clarify the characteristics and differences in temporal changes among patients who underwent either rTSA or SCR using tensor fascia lata for PPS due to irreparable rotator cuff tear without osteoarthritic change (Hamada grade ≤3). METHODS: We enrolled a total of 39 patients who underwent SCR (n = 20) or rTSA (n = 19 cases) with a follow-up period of 2 years. All patients were followed up at 2, 3, 4, 5, 6, 8, 10, 12, and 24 months postoperatively. Preoperative and postoperative range of motion (ROM), American Shoulder and Elbow Surgeons scores, and temporal changes in ROMs were compared between the 2 groups. RESULTS: The SCR group had significantly better ROM than the rTSA group in flexion (146° ± 34° vs. 132° ± 23°, P = .022), abduction (147° ± 36° vs. 130° ± 23°, P = .0092), internal rotation (11 ± 3 Th10 vs. 6 ± 3 L3, P < .001), and American Shoulder and Elbow Surgeons score (84.1 ± 13.8 vs. 80.1 ± 6.1, P = .0096). While the rTSA group achieved 100° in flexion and abduction after 3 months postoperatively, the SCR group took approximately 5 months. However, the SCR group exceeded the rTSA group in flexion and abduction at six months postoperatively. In the SCR group, some patients with irreparable subscapularis tendon tears could not achieve 90° shoulder elevation. Both groups showed significant improvements in shoulder flexion and abduction compared to the preoperative state (P < .001). CONCLUSION: Although SCR requires a longer rehabilitation period, it provides similar outcomes to rTSA after two years for nonosteoarthritic, irreparable cuff tears with pseudoparalysis.

Comparison of early and late aseptic baseplate failure in primary reverse shoulder arthroplasty with and without structural glenoid autograft.

BACKGROUND: Early reverse total shoulder arthroplasty (RTSA) designs demonstrated high glenoid baseplate complication and revision rates. Although contemporary designs have reduced the incidence of glenoid baseplate failures, there are reports of elevated failure risks in RTSA with glenoid bone grafting within the first 2 years. This study aims to evaluate the incidence and etiology of aseptic glenoid baseplate failure with a contemporary central screw baseplate. The null hypothesis is that majority of the baseplate failure occurs within the first 2 years and that use of glenoid bone grafting does not lead to a higher risk of baseplate failure. METHODS: In 2014-2019, a total of 753 consecutive patients who underwent primary RSA using the same inlay press-fit humeral stem and monoblock central screw baseplate were retrospectively reviewed. Fracture and septic arthropathy cases were excluded. All patients underwent preoperative radiographic and computed tomographic evaluation. If there was significant glenoid erosion (Walch A2, B2, B3, C1, C2, E2, E3, and/or E4 variants), patient-specific structural glenoid bone grafting was performed. All patients underwent standardized radiographic follow-up, and failure was strictly defined as any hardware breakage and/or shift in glenoid baseplate position. Failures were defined as "early" if occurring within 2 years and "late" if occurring >2 years after surgery. Comparative analysis was performed to evaluate demographics, glenoid graft use, and graft union rates between the cohorts. RESULTS: There were 23 patients with baseplate failures (23 of 753, 3.0%) at a mean of 23 months. Twenty-two failures (96%) occurred in patients who received structural glenoid bone grafting. Only 1 failure (0.2%) occurred when bone grafting was not indicated (P < .001). The most common failure pattern was associated with the B2 glenoid (16 of 23, 70%). There were 5 early failures (22%) and 18 late failures (78%). There were no differences in any patient demographic characteristics between cohorts. All 5 early failures had graft nonunion, and 4 of them occurred without trauma. In the 18 late failures, 9 (50%) occurred without trauma (P = .135). Seventeen of these patients had glenoid grafting, among which 9 (53%) had graft nonunion. CONCLUSIONS: Contemporary RTSA glenoid baseplate designs have an acceptably low incidence of failure. However, the addition of structural bone graft to correct glenoid wear leads to higher aseptic baseplate failure rate. The majority of these patients suffer failure after the 2-year postoperative mark, highlighting the necessity of longer follow-up. Further analysis is necessary to quantify glenoid characteristics (severity of glenoid erosion, critical size of graft) associated with failure.