Structures and topological defects in pressure-driven lyotropic chromonic liquid crystals.

Lyotropic chromonic liquid crystals are water-based materials composed of self-assembled cylindrical aggregates. Their behavior under flow is poorly understood, and quantitatively resolving the optical retardance of the flowing liquid crystal has so far been limited by the imaging speed of current polarization-resolved imaging techniques. Here, we employ a single-shot quantitative polarization imaging method, termed polarized shearing interference microscopy, to quantify the spatial distribution and the dynamics of the structures emerging in nematic disodium cromoglycate solutions in a microfluidic channel. We show that pure-twist disclination loops nucleate in the bulk flow over a range of shear rates. These loops are elongated in the flow direction and exhibit a constant aspect ratio that is governed by the nonnegligible splay-bend anisotropy at the loop boundary. The size of the loops is set by the balance between nucleation forces and annihilation forces acting on the disclination. The fluctuations of the pure-twist disclination loops reflect the tumbling character of nematic disodium cromoglycate. Our study, including experiment, simulation, and scaling analysis, provides a comprehensive understanding of the structure and dynamics of pressure-driven lyotropic chromonic liquid crystals and might open new routes for using these materials to control assembly and flow of biological systems or particles in microfluidic devices.

Orientational order of dyes in a lyotropic chromonic liquid crystal.

Absorption measurements allow the orientational order parameter of four dyes in the lyotropic chromonic liquid crystal di-sodium cromoglycate (DSCG) to be determined. The dye order parameters are small, except for dyes that intercalate between the DSCG molecules of the rod-like assemblies. The dye order parameters decrease with increasing temperature faster than the nematic order parameter of the DSCG assemblies. For intercalating dyes, the measured dye order parameter varies with the wavelength of the measurement because both intercalated and non-intercalated dye molecules contribute. On the contrary, measurements of the dye order parameter using fluorescence are sensitive only to intercalated dye molecules and produce values that reflect the order parameter of the DSCG assemblies. Therefore, the temperature and concentration dependence of the DSCG order parameter is also explored, since data of this kind on this often-studied system are lacking. Finally, the association constant of one of the intercalating dyes with the DSCG assemblies is determined, yielding a value considerably less than what is found for the same dye with DNA.

From Combinations to Single-Molecule Polypharmacology-Cromolyn-Ibuprofen Conjugates for Alzheimer's Disease.

Despite Alzheimer's disease (AD) incidence being projected to increase worldwide, the drugs currently on the market can only mitigate symptoms. Considering the failures of the classical paradigm "one target-one drug-one disease" in delivering effective medications for AD, polypharmacology appears to be a most viable therapeutic strategy. Polypharmacology can involve combinations of multiple drugs and/or single chemical entities modulating multiple targets. Taking inspiration from an ongoing clinical trial, this work aims to convert a promising cromolyn-ibuprofen drug combination into single-molecule "codrugs." Such codrugs should be able to similarly modulate neuroinflammatory and amyloid pathways, while showing peculiar pros and cons. By exploiting a linking strategy, we designed and synthesized a small set of cromolyn-ibuprofen conjugates (4-6). Preliminary plasma stability and neurotoxicity assays allowed us to select diamide 5 and ethanolamide 6 as promising compounds for further studies. We investigated their immunomodulatory profile in immortalized microglia cells, in vitro anti-aggregating activity towards Aß42-amyloid self-aggregation, and their cellular neuroprotective effect against Aß42-induced neurotoxicity. The fact that 6 effectively reduced Aß-induced neuronal death, prompted its investigation into an in vivo model. Notably, 6 was demonstrated to significantly increase the longevity of Aß42-expressing Drosophila and to improve fly locomotor performance.

Bulk Alignment of Chromonic Aggregates During Swelling of Hydrogels.

This study demonstrates that the bulk alignment of chromonic aggregates can be achieved during the swelling of hydrogels. Swelling of an ionic hydrogel immersed in an aqueous solution of disodium cromoglycate reorients the chromonic aggregates, and millimeter-thick optically anisotropic hydrogels are obtained. These anisotropic hydrogels contain the chromonic aggregates at a condensed concentration as high as in the columnar phase of a normal chromonic aqueous solution, although the X-ray diffraction results show much less stacking order and orientational order of the aggregates. Furthermore, anisotropic mechanical properties of the hydrogels are observed due to the anisotropic alignment of the chromonic aggregates.

Formulation and Characterization of Polysaccharide Microparticles for Pulmonary Delivery of Sodium Cromoglycate.

Sodium cromoglycate (SC) is an antiasthmatic and antiallergenic drug commonly used for chronic inhalation therapy; however, many daily intakes are required due to the fast drug clearance from airways. For these reasons, SC polymeric particles for inhalatory administration with adequate aerosolization and mucoadhesive properties were designed to prolong the drug residence time in the site of action. Sodium carboxymethylcellulose (CMCNa), sodium hyaluronate, and sodium alginate were selected to co-process SC by spray drying. The influence of these polysaccharides on the spray drying process and powder quality was evaluated (among others, morphology, size, moisture content, hygroscopicity, flowability, densities, liquid sorption, and stability). In vitro aerosolization, drug release, and mucoadhesion performance were also studied. Particularly, a novel method to comparatively evaluate the interaction between formulations and mucin solution (mucoadhesion test) was proposed as a rapid methodology to measure adhesion properties of inhalable particles, being the results as indicative of clearance probability. Among all the studied formulations, the powder based on SC and CMCNa exhibited the best mucoadhesion and aerosolization performance, the highest process yield and adequate moisture content, hygroscopicity, and stability. SC-CMCNa formulation arose as a promising inhalatory system to reduce the daily intakes and to increase the patient compliance.

A Food and Drug Administration-approved asthma therapeutic agent impacts amyloid ß in the brain in a transgenic model of Alzheimer disease.

Interfering with the assembly of Amyloid ß (Aß) peptides from monomer to oligomeric species and fibrils or promoting their clearance from the brain are targets of anti-Aß-directed therapies in Alzheimer disease. Here we demonstrate that cromolyn sodium (disodium cromoglycate), a Food and Drug Administration-approved drug already in use for the treatment of asthma, efficiently inhibits the aggregation of Aß monomers into higher-order oligomers and fibrils in vitro without affecting Aß production. In vivo, the levels of soluble Aß are decreased by over 50% after only 1 week of daily intraperitoneally administered cromolyn sodium. Additional in vivo microdialysis studies also show that this compound decreases the half-life of soluble Aß in the brain. These data suggest a clear effect of a peripherally administered, Food and Drug Administration-approved medication on Aß economy, supporting further investigation of the potential long-term efficacy of cromolyn sodium in Alzheimer disease.

Alignment and Graphene-Assisted Decoration of Lyotropic Chromonic Liquid Crystals Containing DNA Origami Nanostructures.

Composites of DNA origami nanostructures dispersed in a lyotropic chromonic liquid crystal are studied by polarizing optical microscopy. The homogeneous aqueous dispersions can be uniformly aligned by confinement between two glass substrates, either parallel to the substrates owing to uniaxial rubbing or perpendicular to the substrates using ozonized graphene layers. These opportunities of uniform alignment may pave the way for tailored anisometric plasmonic DNA nanostructures to photonic materials. In addition, a decorated texture with nonuniform orientation is observed on substrates coated with pristine graphene. When the water is allowed to evaporate slowly, microscopic crystal needles appear, which are aligned along the local orientation of the director. This decoration method can be used for studying the local orientational order and the defects in chromonic liquid crystals.

Applicability of Bipolar Charge Analyzer (BOLAR) in Characterizing the Bipolar Electrostatic Charge Profile of Commercial Metered Dose Inhalers (MDIs).

PURPOSE: To investigate the applicability of Bipolar Charge Analyzer (BOLAR), a new commercial instrument developed by Dekati Ltd., in simultaneously characterizing the bipolar electrostatic charge profile and measuring the size distribution of commercial metered dose inhalers (MDIs). METHODS: Intal Forte(®) (sodium cromoglycate), Tilade(®) (nedocromil sodium), Ventolin(®) (salbutamol sulphate), and QVAR(®) (beclomethasone dipropionate) were used as model MDIs in this study. Three individual actuations of each MDI were introduced into the BOLAR at an air flow rate of 60 l/min. Charge and mass profiles for each actuation were determined. RESULTS: The BOLAR was found to have better performance in collecting valid charge data (≥80%) than valid mass data (≥50%). In all tested products, both positively and negatively charged particles were found in five defined size fractions between zero and 11.6 µm, with the charge magnitude decreased with increasing particle size. The net charge profiles obtained from the BOLAR qualitatively agreed with the results reported previously. In all suspension type MDIs, negligible masses were detected in the smallest size fraction (<0.95 µm), for which the charge was most likely caused by the propellant and excipients. QVAR was the only solution MDI tested and the charge and mass profiles were significantly different from the suspension-type MDIs. Its mass profile was found to follow closely with the charge profile. CONCLUSIONS: Positively and negatively charged MDI particles of different size fractions and their corresponding charge-to-mass profiles were successfully characterized by the BOLAR.

Interpreting the behavior of concentration-response curves of hyaluronidase inhibitors under DMSO-perturbed assay conditions.

Hyaluronan-degrading enzyme (hyaluronidase) is involved in tumor growth and inflammation, and as such, hyaluronidase inhibitors have received recent attention as potential therapeutics. The previous studies have successfully discovered a wide range of inhibitors, but unfortunately most of them are dissimilar to original ligand hyaluronan and the mode of action is poorly understood. The present study mechanistically characterized these structurally unrelated inhibitors by interpreting the behavior of concentration-response curves under several in vitro assay conditions. Detergent-addition conditions definitely identified aggregation-based inhibitors. Subsequently, DMSO-perturbed conditions, though preliminary, highlighted the inhibitors that might bind to enzyme non-specifically. Here, an intriguing implication of the latter description is that DMSO-perturbed conditions would generate non-productive but not-denatured enzyme that is an assembly of effective species to capture non-specific binding molecules, and thereby would attenuate their inhibitory activities.

Highly water-soluble mast cell stabiliser-encapsulated solid lipid nanoparticles with enhanced oral bioavailability.

Cromolyn sodium (CS), a mast cell stabiliser, is widely employed for the prevention and treatment of allergic conditions. However, high hydrophilicity and poor oral permeability hinder its oral clinical translation. Here, solid lipid nanoparticles (SLNs) have been developed for the purpose of oral bioavailability enhancement. The CS-SLNs were engineered by double emulsification method (W1/O/W2) and optimised by using Box-Behnken experimental design. The surface and solid-state characterisations revealed the presence of CS in an amorphous form without any interactions inside the spherical-shaped SLNs. The in-vitro release study showed an extended release up to 24 hr by diffusion controlled process. Ex-vivo and in-vivo intestinal permeation study showed ∼2.96-fold increase in permeability of CS by presentation as SLNs (p < 0.05). Further, in-vivo pharmacokinetic study exhibited ∼2.86-fold enhancements in oral bioavailability of CS by encapsulating inside SLNs, which clearly indicate that SLNs can serve as the potential therapeutic carrier system for oral delivery of CS.

Bacterial Motility Reveals Unknown Molecular Organization.

The water solubility of lyotropic liquid crystals (LCs) makes them very attractive to study the behavior of biological microorganisms in an environment where local symmetry is broken (as often encountered in nature). Several recent studies have shown a dramatic change in the behavior of flagellated bacteria when swimming in solutions of the lyotropic LC disodium cromoglycate (DSCG). In this study, the movements of Escherichia coli bacteria in DSCG-water solutions of different concentrations are observed to improve our understanding of this phenomenon. In addition, the viscosity of DSCG aqueous solutions is measured as a function of concentration at room temperature. We also experimentally identify a previously undescribed isotropic pretransition zone where bacteria start sticking to each other and to surfaces. Simple estimations show that the unbalanced osmotic pressure induced depletion force might be responsible for this sticking phenomenon. An estimate of the bacteria propulsive force and the DSCG aggregates length (versus concentration) are calculated from the measured viscosity of the medium. All these quantities are found to undergo a strong increase in the pretransition zone, starting at a threshold concentration of 6±1 wt % DSCG that is well below the known isotropic-LC transition (∼10 wt %). This study also shines light on the motility of flagellated bacteria in realistic environments, and it opens new avenues for interesting applications such as the use of motile microorganisms to probe the physical properties of their host or smart bandages that could guide bacteria out of wounds.

Microscale locomotion in a nematic liquid crystal.

Microorganisms often encounter anisotropy, for example in mucus and biofilms. We study how anisotropy and elasticity of the ambient fluid affects the speed of a swimming microorganism with a prescribed stroke. Motivated by recent experiments on swimming bacteria in anisotropic environments, we extend a classical model for swimming microorganisms, the Taylor swimming sheet, actuated by small-amplitude traveling waves in a three-dimensional nematic liquid crystal without twist. We calculate the swimming speed and entrained volumetric flux as a function of the swimmer's stroke properties as well as the elastic and rheological properties of the liquid crystal. These results are then compared to previous results on an analogous swimmer in a hexatic liquid crystal, indicating large differences in the cases of small Ericksen number and in a nematic fluid when the tumbling parameter is near the transition to a shear-aligning nematic. We also propose a novel method of swimming or pumping in a nematic fluid by passing a traveling wave of director oscillation along a rigid wall.

Disodium Cromoglycate Templates Anisotropic Short-Chain PEG Hydrogels.

Anisotropic hydrogels have found widespread applications in biomedical engineering, particularly as scaffolds for tissue engineering. However, it remains a challenge to produce them using conventional fabrication methods, without specialized synthesis or equipment, such as 3D printing and unidirectional stretching. In this study, we explore the self-assembly behaviors of polyethylene glycol diacrylate (PEGDA), using disodium cromoglycate (DSCG), a lyotropic chromonic liquid crystal, as a removable template. The affinity between short-chain PEGDA (Mn = 250) and DSCG allows polymerization to take place at the DSCG surface, thereby forming anisotropic hydrogel networks with fibrin-like morphologies. This process requires considerable finesse as the phase behaviors of DSCG depend on a multitude of factors, including the weight percentage of PEGDA and DSCG, the chain length of PEGDA, and the concentration of ionic species. The key to modulating the microstructures of the all-PEG hydrogel networks is through precise control of the DSCG concentration, resulting in anisotropic mechanical properties. Using these anisotropic hydrogel networks, we demonstrate that human dermal fibroblasts are particularly sensitive to the alignment order. We find that cells exhibit a density-dependent activation pattern of a Yes-associated protein, a mechanotransducer, corroborating its role in enabling cells to translate external mechanical and morphological patterns to specific behaviors. The flexibility of modulating microstructure, along with PEG hydrogels' biocompatibility and biodegradability, underscores their potential use for tissue engineering to create functional structures with physiological morphologies.

Molecularly imprinted polymers for histamine recognition in aqueous environment.

Molecularly imprinted polymers (MIP) for histamine using methacrylic acid were developed and recognition mechanisms were thoroughly characterized for the first time in this study. The binding affinity of imprinted polymer with structurally related compounds was studied in organic and aqueous media, at various conditions. In organic media, MIP was found to bind histamine two and six times more than ranitidine and fluoxetine, respectively, whereas higher selectivity was observed in the case of dimentidene or disodium cromoglycate. The specific binding sites of MIP recognized histamine over L-histidine in aqueous conditions, while higher affinity for histamine compared to ranitidine, disodium cromoglycate, putrescine and to a putrescine analogue was observed. A combination of NMR and UV spectroscopy analyses for investigation of imprinting and recognition properties revealed that strong specific interactions between the functional monomer and histamine in the prepolymerization and in the aqueous solutions were probably responsible for histamine recognition. The preparation of histamine MIPs and elucidation of imprinting and recognition mechanism may serve as useful insight for future application of MIPs.

Noncovalent polymerization of mesogens crystallizes lysozyme: correlation between nonamphiphilic lyotropic liquid crystal phase and protein crystal formation.

Crystallization of proteins is important for fundamental studies and biopharmaceutical development but remains largely an empirical science. Here, we report the use of organic salts that can form a class of unusual nonamphiphilic lyotropic liquid crystals to crystallize the protein lysozyme. Certain nonamphiphilic organic molecules with fused aromatic rings and two charges can assemble into stable thread-like noncovalent polymers that may further form liquid crystal phases in water, traditionally termed chromonic liquid crystals. Using five of these mesogenic molecules as additives to induce protein crystallization, we discover that molecules that can form liquid crystal phases in water are highly effective at inducing the crystal formation of lysozyme, even at concentrations significantly lower than that required for forming liquid crystal phases. This result reveals an example of inducing protein crystallization by the molecular assembly of the additives, and is consistent with a new mechanism by which the strong hydration of an assembly process provides a gradual means to compete for the water molecules to enable solvated proteins to form crystals.

A capacitively coupled temperature-jump arrangement for high-resolution biomolecular NMR.

A simple design for performing rapid temperature jumps within a high-resolution nuclear magnetic resonance (NMR) setting is presented and exemplified. The design is based on mounting, around a conventional NMR glass tube, an inductive radiofrequency (RF) irradiation coil that is suitably tuned by a resonant circuit and is driven by one of the NMR's console high-power RF amplifiers. The electric fields generated by this coil's thin metal strips can lead to a fast and efficient heating of the sample, amounting to temperature jumps of ≈ 20 °C in well within a second-particularly in the presence of lossy dielectric media like those provided by physiological buffers. Moreover, when wound around a 4-mm NMR tube, the resulting device fits a conventional 5-mm inverse probe and is wholly compatible with the field homogeneities and sensitivities expected for high-resolution biomolecular NMR conditions. The performance characteristics of this new system were tested using saline solutions, as well as on a lyotropic liquid crystal capable of undergoing nematic → isotropic transitions in the neighborhood of ambient temperature. These settings were then incorporated into the performance of a new kind of single-scan 2D NMR spectroscopy acquisition, correlating the anisotropic and isotropic patterns elicited by solutes dissolved in such liquid-crystalline systems, before and after a sudden temperature jump occurring during an intervening mixing period.

Characterization of interactions between cromolyn sodium and bovine serum albumin by spectroscopic, calorimetric and computational methods.

Cromolyn sodium (CS), an anti-inflammatory drug is used in the treatment of allergic disorders. Bovine serum albumin (BSA) a blood plasma protein is used as a model protein for studying protein folding and ligand binding mechanism as it is the main transporter protein which decides the disposition and pharmacodynamics of numerous drugs. In this study, interaction of CS with BSA was investigated using isothermal titration calorimetry, UV-vis, fluorescence, circular dichroism (CD) spectroscopy and molecular docking techniques. Steady state fluorescence data revealed that BSA-CS complex formation occurred through static mode of quenching. Negative values of Gibbs free energy change and enthalpy change showed that BSA-CS complexation was spontaneously favorable and enthalpy driven. CS preferentially interacted at Sudlow's site I (sub-domain IIA) of BSA and the finding was further substantiated by molecular docking study. The binding of CS induced changes in secondary motif of BSA resulting decrease of α-helical content as evident from CD. We explored detailed thermodynamic and structural parameters of interaction of CS to BSA that will be helpful for understanding the more precise binding mechanism of the drug at molecular level.Communicated by Ramaswamy H. Sarma.

Duodenal acidification induces gastric relaxation and alters epithelial barrier function by a mast cell independent mechanism.

Duodenal hyperpermeability and low-grade inflammation in functional dyspepsia is potentially related to duodenal acid exposure. We aimed to evaluate in healthy volunteers the involvement of mast cell activation on the duodenogastric reflex and epithelial integrity during duodenal acidification. This study consisted of 2 parts: (1) Duodenal infusion of acid or saline during thirty minutes in a randomized, double-blind cross-over manner with measurement of intragastric pressure (IGP) using high resolution manometry and collection of duodenal biopsies to measure epithelial barrier function and the expression of cell-to-cell adhesion proteins. Mast cells and eosinophils were counted and activation and degranulation status were assessed. (2) Oral treatment with placebo or mast cell stabilizer disodiumcromoglycate (DSCG) prior to duodenal perfusion with acid, followed by the procedures described above. Compared with saline, acidification resulted in lower IGP (P < 0.01), increased duodenal permeability (P < 0.01) and lower protein expression of claudin-3 (P < 0.001). Protein expression of tryptase (P < 0.001) was increased after acid perfusion. Nevertheless, an ultrastructural examination did not reveal degranulation of mast cells. DSCG did not modify the drop in IGP and barrier dysfunction induced by acid. Duodenal acidification activates an inhibitory duodenogastric motor reflex and, impairs epithelial integrity in healthy volunteers. However, these acid mediated effects occur independently from mast cell activation.

In vitro assessment of an idealized nose for nasal spray testing: Comparison with regional deposition in realistic nasal replicas.

An idealized nasal replica that mimics average regional deposition of nasal spray pump droplets in human nasal airways would potentially be useful in expediting the development of nasal spray products. The aim of this study was to validate an idealized nose, previously developed using in silico simulations, by comparing with regional deposition in realistic, sectioned nasal replicas obtained from in vitro deposition experiments. The realistic nasal airway replicas of five subjects obtained from computerized tomography were manufactured in plastic using rapid prototyping. The idealized nose was made using the same build procedure. A commercial nasal spray pump (NasalCrom, 5.2 mg cromolyn sodium per spray) was then actuated repeatably into each replica under a steady inspiratory flow of 7.5 L/min at two different orientations (45° and 60° from the horizontal). Sectioned replicas were disassembled, and the mass fraction of drug deposited on the surface of each anatomical region was determined. It was found that regional deposition of spray droplets in the idealized replica agreed well with average regional deposition in the realistic replicas. Regional deposition also agreed with previously published in vivo regional deposition using the same spray pump.

Cromolyn-crosslinked chitosan nanoparticles for the treatment of allergic rhinitis.

The aim of this work was to prepare new mucoadhesive nasal decongestant nanoparticles obtained by direct crosslinking between the cationic polymer chitosan and the anionic drug cromolyn. Different chitosan/cromolyn molar ratios were used in order to obtain nanoparticles of suitable size, encapsulation efficiency/drug loading and mucoadhesion. Moreover, the ability of the nanoparticles to deliver cromolyn into and through the nasal mucosa was evaluated. The obtained positively charged nanoparticles, sized 180-400 nm, showed interesting properties in terms of yield, mucoadhesion, encapsulation efficiency and drug loading. Release and permeation/penetration data indicated the ability of the nanoparticles to retain a high amount of cromolyn inside the mucosa, which is rich in mast cells. These findings suggest developing decongestant nanoparticles for potential treatment of allergic rhinitis.