Effect of orthodontic space closure on dental pulp sensitivity. Prospective clinical trial.

BACKGROUND: Orthodontic tooth movement (OTM) is a biological process that can influence the function of the pulp, including its innervation. The excitability of the nerve fibres of the pulp may be altered by forces exerted on the nerve fibres or by reduced blood flow to the pulp. The aim of this clinical study was to evaluate the sensitivity of the dental pulp during levelling and during the phase of space closure, to assess the role of certain controlled risk factors. METHODS: Twenty-two adolescent participants requiring orthodontic space closure in transcanine sector were enrolled in a prospective clinical study. Patients were observed before OTM, after levelling and 1 month during active space closure. The sensitivity threshold of the pulp was measured using the electric pulp test (EPT). Dental models were obtained using an intraoral scanner, allowing measurement of interdental distances and calculation of OTM speed. The teeth were categorized according to position and tooth type. RESULTS: The EPT values increased significantly during orthodontic treatment (one-way RM-ANOVA, P = .014). There was a significant difference in EPT values between the tooth categories. Teeth with a single root adjacent to the residual space had the highest EPT thresholds (two-way RM-ANOVA, P < .001; Holm-Sidak, P < .05). CONCLUSIONS: OTM reduced pulpal sensitivity. Pulpal sensitivity during active space closure was similar to sensitivity during the levelling phase. The pulpal sensitivity of molars was less affected by OTM than that of single-rooted teeth, while teeth closer to the gap had a significantly higher pulpal sensitivity threshold during active OTM.

Investigating lymphangiogenesis in vitro and in vivo using engineered human lymphatic vessel networks.

The lymphatic system is involved in various biological processes, including fluid transport from the interstitium into the venous circulation, lipid absorption, and immune cell trafficking. Despite its critical role in homeostasis, lymphangiogenesis (lymphatic vessel formation) is less widely studied than its counterpart, angiogenesis (blood vessel formation). Although the incorporation of lymphatic vasculature in engineered tissues or organoids would enable more precise mimicry of native tissue, few studies have focused on creating engineered tissues containing lymphatic vessels. Here, we populated thick collagen sheets with human lymphatic endothelial cells, combined with supporting cells and blood endothelial cells, and examined lymphangiogenesis within the resulting constructs. Our model required just a few days to develop a functional lymphatic vessel network, in contrast to other reported models requiring several weeks. Coculture of lymphatic endothelial cells with the appropriate supporting cells and intact PDGFR-ß signaling proved essential for the lymphangiogenesis process. Additionally, subjecting the constructs to cyclic stretch enabled the creation of complex muscle tissue aligned with the lymphatic and blood vessel networks, more precisely biomimicking native tissue. Interestingly, the response of developing lymphatic vessels to tensile forces was different from that of blood vessels; while blood vessels oriented perpendicularly to the stretch direction, lymphatic vessels mostly oriented in parallel to the stretch direction. Implantation of the engineered lymphatic constructs into a mouse abdominal wall muscle resulted in anastomosis between host and implant lymphatic vasculatures, demonstrating the engineered construct's potential functionality in vivo. Overall, this model provides a potential platform for investigating lymphangiogenesis and lymphatic disease mechanisms.

Exploring approaches to pulp vitality assessment: A scoping review of nontraditional methods.

INTRODUCTION: Diagnostic procedures for pulp vitality assessment are a crucial aspect of routine dental practice. This review aims to provide a comprehensive overview of nontraditional techniques and methodologies for assessing pulp vitality, specifically exploring promising approaches that are currently not used in dental practice. METHODS: The study protocol was registered a priori (https://osf.io/3m97z/). An extensive electronic search was conducted across multiple databases, including MEDLINE via PubMed, Scopus, Web of Science, and Embase. Inclusion criteria were guided by the research question based on the PCC model as follows: "What are the potential nontraditional techniques (Concept) for assessing pulp vitality (Population) in the field of endodontics or clinical practice (Context)?" Studies were included that explored possible approaches to pulp vitality assessment, utilizing a range of techniques, whilst any studies using traditional pulp tests (cold, heat, and electric stimulation) or well-known methods (pulse oximetry and laser Doppler flowmetry) were excluded. Reviewers independently screened articles and extracted data. A patent search was also performed. RESULTS: Of 3062 studies, 65 were included that described nontraditional approaches for assessing pulp vitality. These included a range of optical diagnostic methods, ultrasound Doppler flowmetry (UDF), magnetic resonance imaging (MRI), terahertz imaging, tooth temperature measurements, as well as invasive methodologies, including 133xenon washout, radioisotope-labelled tracers, hydrogen gas desaturation, intravital microscopy and fluorescent microspheres isotope clearance. The patent search included artificial intelligence and biomarkers methods. CONCLUSIONS: This review provides details for potential innovative tests that may directly describe pulp vitality. Importantly, these methods range from clinically impractical through to promising methods that may transform clinical practice. Several nontraditional techniques have the potential to enhance diagnostic accuracy and could provide valuable insights into the assessment of pulp vitality in challenging clinical scenarios.

Dentin Mechanobiology: Bridging the Gap between Architecture and Function.

It is remarkable how teeth maintain their healthy condition under exceptionally high levels of mechanical loading. This suggests the presence of inherent mechanical adaptation mechanisms within their structure to counter constant stress. Dentin, situated between enamel and pulp, plays a crucial role in mechanically supporting tooth function. Its intermediate stiffness and viscoelastic properties, attributed to its mineralized, nanofibrous extracellular matrix, provide flexibility, strength, and rigidity, enabling it to withstand mechanical loading without fracturing. Moreover, dentin's unique architectural features, such as odontoblast processes within dentinal tubules and spatial compartmentalization between odontoblasts in dentin and sensory neurons in pulp, contribute to a distinctive sensory perception of external stimuli while acting as a defensive barrier for the dentin-pulp complex. Since dentin's architecture governs its functions in nociception and repair in response to mechanical stimuli, understanding dentin mechanobiology is crucial for developing treatments for pain management in dentin-associated diseases and dentin-pulp regeneration. This review discusses how dentin's physical features regulate mechano-sensing, focusing on mechano-sensitive ion channels. Additionally, we explore advanced in vitro platforms that mimic dentin's physical features, providing deeper insights into fundamental mechanobiological phenomena and laying the groundwork for effective mechano-therapeutic strategies for dentinal diseases.

Influence of extracellular matrix scaffolds on histological outcomes of regenerative endodontics in experimental animal models: a systematic review.

BACKGROUND: Decellularized extracellular matrix (dECM) from several tissue sources has been proposed as a promising alternative to conventional scaffolds used in regenerative endodontic procedures (REPs). This systematic review aimed to evaluate the histological outcomes of studies utilizing dECM-derived scaffolds for REPs and to analyse the contributing factors that might influence the nature of regenerated tissues. METHODS: The PRISMA 2020 guidelines were used. A search of articles published until April 2024 was conducted in Google Scholar, Scopus, PubMed and Web of Science databases. Additional records were manually searched in major endodontic journals. Original articles including histological results of dECM in REPs and in-vivo studies were included while reviews, in-vitro studies and clinical trials were excluded. The quality assessment of the included studies was analysed using the ARRIVE guidelines. Risk of Bias assessment was done using the (SYRCLE) risk of bias tool. RESULTS: Out of the 387 studies obtained, 17 studies were included for analysis. In most studies, when used as scaffolds with or without exogenous cells, dECM showed the potential to enhance angiogenesis, dentinogenesis and to regenerate pulp-like and dentin-like tissues. However, the included studies showed heterogeneity of decellularization methods, animal models, scaffold source, form and delivery, as well as high risk of bias and average quality of evidence. DISCUSSION: Decellularized ECM-derived scaffolds could offer a potential off-the-shelf scaffold for dentin-pulp regeneration in REPs. However, due to the methodological heterogeneity and the average quality of the studies included in this review, the overall effectiveness of decellularized ECM-derived scaffolds is still unclear. More standardized preclinical research is needed as well as well-constructed clinical trials to prove the efficacy of these scaffolds for clinical translation. OTHER: The protocol was registered in PROSPERO database #CRD42023433026. This review was funded by the Science, Technology and Innovation Funding Authority (STDF) under grant number (44426).

Accuracy of vitality and sensibility testing in mature and immature anterior teeth: a clinical trial.

INTRODUCTION: Determining the health the status of the pulp is crucial in treatment planning. Both sensibility and vitality testing techniques may be employed. Sensibility testing may be inaccurate in teeth with incomplete root apices. This study intends to compare the accuracy of cold testing (CT), electric pulp testing (EPT) and pulse oximetry (PO) in determining pulpal status of mature and immature anterior teeth. METHODS: 20 mature and 20 immature maxillary permanent incisors of healthy 6-12-year-olds were included. Teeth were categorised as mature permanent central incisors, immature permanent central incisors, and a negative control group with endodontically treated incisors. Vitality and sensitivity tests were performed using EPT, CT, and PO, with measurements taken thrice per tooth. PO was measured with infant pulse oximetry probe sensors placed on the tooth surfaces and fingers. Descriptive statistics were computed, and data distribution was assessed using the Shapiro-Wilk test. The Spearman correlation coefficient analysed correlations between dental and finger SpO2 measurements, while the Kruskal-Wallis test with Dunn post-hoc analysis compared SpO2 and EPT measurements across tooth development stages, with a significance threshold set at p < 0.05. RESULTS: SpO2 values were significantly higher in immature teeth compared to mature teeth (p < 0.05), and both were significantly higher than in the negative control group. There was no significant correlation between SpO2 values measured from fingers and teeth. EPT values were significantly higher in immature teeth compared to mature teeth (p < 0.001). The accuracy rate of PO, EPT, and cold tests was 100% in this study, with no false positive or negative responses in the control group. The SpO2 values in mature and immature vital teeth ranged between 80-92%. CONCLUSIONS: PO is a reliable and non-invasive method for determining pulp vitality in both mature and immature teeth, comparable to traditional sensitivity tests like EPT and CT. PO can be considered an alternative vitality test, especially useful in paediatric dental patients due to its atraumatic and objective nature. Further studies with larger sample sizes and additional vitality tests like doppler flowmetry are recommended to enhance the clinical diagnosis of pulp vitality in anterior and posterior teeth.

Research progress of dental pulp regeneration treatment. / å†ç”Ÿæ€§ç‰™é«“æ²»ç–—çš„ç ”ç©¶è¿›å±•.

The dental pulp is the only soft tissue structure within the tooth, serving functions such as sensation and nutrition. However, the dental pulp is highly susceptible to necrosis due to external factors. Currently, root canal therapy is the most commonly used treatment for pulp necrosis. Nevertheless, teeth treated with root canal therapy are prone to secondary infections and adverse outcomes like vertical root fractures. Regenerative endodontic therapy has emerged as a solution, aiming to replace damaged tooth structures, including dentin, root structure, and the pulp-dentin complex cells. This approach demonstrates significant advantages in addressing clinical symptoms and achieving regeneration of the root and even the pulp. Since the discovery of dental pulp stem cells, regenerative endodontic therapy has gained new momentum. Advances in cell transplantation and cell homing techniques have rapidly developed, showing promising potential for clinical applications.

In vitro, ex vivo, and in vivo models for dental pulp regeneration.

Based on the concept of tissue engineering (Cells-Scaffold-Bioactive molecules), regenerative endodontics appeared as a new notion for dental endodontic treatment. Its approaches aim to preserve dental pulp vitality (pulp capping) or to regenerate a vascularized pulp-like tissue inside necrotic root canals by cell homing. To improve the methods of tissue engineering for pulp regeneration, numerous studies using in vitro, ex vivo, and in vivo models have been performed. This review explores the evolution of laboratory models used in such studies and classifies them according to different criteria. It starts from the initial two-dimensional in vitro models that allowed characterization of stem cell behavior, through 3D culture matrices combined with dental tissue and finally arrives at the more challenging ex vivo and in vivo models. The travel which follows the elaboration of such models reveals the difficulty in establishing reproducible laboratory models for dental pulp regeneration. The development of well-established protocols and new laboratory ex vivo and in vivo models in the field of pulp regeneration would lead to consistent results, reduction of animal experimentation, and facilitation of the translation to clinical practice.

Unveiling the Differences in Biological Properties of Dental Pulp Stem Cells from Normal and Inflamed Pulp: A Comprehensive Comparative Study.

BACKGROUND The aims of the study were to comprehensively compare the morphology, immunophenotype, proliferation, migration, and regeneration potential of normal dental pulp stem cells (DPSCs) versus inflammatory dental pulp stem cells (iDPSCs). MATERIAL AND METHODS Healthy pulp or inflamed pulp tissue was used to isolate and culture DPSCs and iDPSCs, respectively. These cell populations were characterized by flow cytometry, colony formation assay, transwell assay, and multi-directional differentiation in vitro. RESULTS No difference was observed in the morphology, cell-surface markers, or cell migration between DPSCs and iDPSCs. DPSCs showed a higher colony-forming capacity, proliferative viability, and osteo/dentinogenesis ability compared with iDPSCs. However, iDPSCs demonstrated enhanced neurogenesis, angiogenesis, adipogenesis, and chondrogenesis capacities in comparison to DPSCs. CONCLUSIONS Our data revealed the differences of biological properties between DPSCs and iDPSCs. The highly angiogenic and neurogenic potential of iDPSCs indicate their possible use in the regeneration of the dentin-pulp complex and support the critical role of angiogenesis and neurogenesis in pulp regeneration.

Comparison of the effect of cigarette smoke on mesenchymal stem cells and dental stem cells.

The persistent prevalence of cigarette smoking continues to contribute to preventable disease and death in the United States. Although much is known about the deleterious systemic effects of cigarette smoke and nicotine, some clinically relevant areas, such as the impact of cigarette smoke and nicotine on stem cells and the subsequent implications in regenerative medicine, still remain unclear. This review focuses on recent studies on the effect of cigarette smoke and one of its deleterious components, nicotine, on mesenchymal stem cells, with an emphasis on dental stem cells.

Which experimental models and explorations to use in regenerative endodontics? A comprehensive review on standard practices.

Since the discovery of dental pulp stem cells, a lot of teams have expressed an interest in dental pulp regeneration. Many approaches, experimental models and biological explorations have been developed, each including the use of stem cells and scaffolds with the final goal being clinical application in humans. In this review, the authors' objective was to compare the experimental models and strategies used for the development of biomaterials for tissue engineering of dental pulp with stem cells. Electronic queries were conducted on PubMed using the following terms: pulp regeneration, scaffold, stem cells, tissue engineering and biomaterial. The extracted data included the following information: the strategy envisaged, the type of stem cells, the experimental models, the exploration or analysis methods, the cytotoxicity or viability or proliferation cellular tests, the tests of scaffold antibacterial properties and take into account the vascularization of the regenerated dental pulp. From the 71 selected articles, 59% focused on the "cell-transplantation" strategy, 82% used in vitro experimentation, 58% in vivo animal models and only one described an in vivo in situ human clinical study. 87% used dental pulp stem cells. A majority of the studies reported histology (75%) and immunohistochemistry explorations (66%). 73% mentioned the use of cytotoxicity, proliferation or viability tests. 48% took vascularization into account but only 6% studied the antibacterial properties of the scaffolds. This article gives an overview of the methods used to regenerate dental pulp from stem cells and should help researchers create the best development strategies for research in this field.

The effect of high wear diets on the relative pulp volume of the lower molars.

OBJECTIVES: One role of dental pulp is in the upkeep and maintenance of dentine. Under wear, odontoblasts in the pulp deposit tertiary dentine to ensure the sensitive internal dental tissues are not exposed and vulnerable to infection. It follows that there may be an adaptive advantage for increasing molar pulp volume in anthropoid primate taxa that are prone to high levels of wear. The relative volume of dental pulp is therefore predicted to covary with dietary abrasiveness (in the sense of including foods that cause high degrees of wear). MATERIALS AND METHODS: We examined relatively unworn lower second molars in pairs of species of extant hominoids, cebids, and pitheciids that vary in the abrasiveness of their diet (n = 36). Using micro-CT scans, we measured the percent of tooth that is pulp (PTP) as the ratio of pulp volume to that of the total volume of the tooth. RESULTS: We found that in each pair of species, the taxa that consume a more abrasive diet had a significantly higher PTP than the closely related taxa that consume a softer diet. CONCLUSIONS: Our results point to an adaptive mechanism in the molars of taxa that consume abrasive diets and are thus subject to higher levels of wear. Our results provide additional understanding of the relationship between dental pulp and diet and may offer insight into the diet of extinct taxa such as Paranthropus boisei or into the adaptive context of the taurodont molars of Neanderthals.

Upregulated microRNA-126 induces apoptosis of dental pulp stem cell via mediating PTEN-regulated Akt activation.

INTRODUCTION: Human dental pulp stem cells (DPSCs) have potential applications in regenerative medicine. The molecular mechanisms underlying DPSCs viability and apoptosis are not completely understood. Here, we investigated the role of miR-126 in DPSCs viability and apoptosis. MATERIAL AND METHODS: Senescent DPSCs were compared with early passage DPSCs. real-time PCR and microARRAY were performed to identify the differential expression of miR-126, and western blot was performed to detect the expression of PTEN. MTT assay was utilized to reveal the proliferative rate of both senescent and early passage DPSCs. Flow cytometry was used to examine the apoptotic rate of DPSCs. Dual-luciferase reporter assay was carried out to detect the interaction of miR-126 and PTEN. RESULTS: Senescent DPSCs showed a high level of apoptosis. Further study showed that miR-126 is upregulated in senescent DPSCs and its overexpression in early passaged DPSCs induced apoptosis. Phosphatase and tensin homolog gene (PTEN) was identified as a target of miR-126. PTEN was downregulated in senescent DPSCs, whereas miR-126 inhibition upregulated PTEN level, and subsequently activated Akt pathway and suppressed the apoptotic phenotype of senescent DPSCs. In addition, PTEN overexpression rescued apoptosis of DPSCs at later stage. CONCLUSION: Our results demonstrate that the miR-126-PTEN-Akt axis plays a key role in the regulation of DPSCs apoptosis and provide a candidate target to improve the functional and therapeutic potential of DPSCs.

Functional Dental Pulp Regeneration: Basic Research and Clinical Translation.

Pulpal and periapical diseases account for a large proportion of dental visits, the current treatments for which are root canal therapy (RCT) and pulp revascularisation. Despite the clinical signs of full recovery and histological reconstruction, true regeneration of pulp tissues is still far from being achieved. The goal of regenerative endodontics is to promote normal pulp function recovery in inflamed or necrotic teeth that would result in true regeneration of the pulpodentinal complex. Recently, rapid progress has been made related to tissue engineering-mediated pulp regeneration, which combines stem cells, biomaterials, and growth factors. Since the successful isolation and characterisation of dental pulp stem cells (DPSCs) and other applicable dental mesenchymal stem cells, basic research and preclinical exploration of stem cell-mediated functional pulp regeneration via cell transplantation and cell homing have received considerably more attention. Some of this effort has translated into clinical therapeutic applications, bringing a ground-breaking revolution and a new perspective to the endodontic field. In this article, we retrospectively examined the current treatment status and clinical goals of pulpal and periapical diseases and scrutinized biological studies of functional pulp regeneration with a focus on DPSCs, biomaterials, and growth factors. Then, we reviewed preclinical experiments based on various animal models and research strategies. Finally, we summarised the current challenges encountered in preclinical or clinical regenerative applications and suggested promising solutions to address these challenges to guide tissue engineering-mediated clinical translation in the future.

Intra-Individual Variability of Human Dental Pulp Stem Cell Features Isolated from the Same Donor.

It is primarily important to define the standard features and factors that affect dental pulp stem cells (DPSCs) for their broader use in tissue engineering. This study aimed to verify whether DPSCs isolated from various teeth extracted from the same donor exhibit intra-individual variability and what the consequences are for their differentiation potential. The heterogeneity determination was based on studying the proliferative capacity, viability, expression of phenotypic markers, and relative length of telomere chromosomes. The study included 14 teeth (6 molars and 8 premolars) from six different individuals ages 12 to 16. We did not observe any significant intra-individual variability in DPSC size, proliferation rate, viability, or relative telomere length change within lineages isolated from different teeth but the same donor. The minor non-significant variances in phenotype were probably mainly because DPSC cell lines comprised heterogeneous groups of undifferentiated cells independent of the donor. The other variances were seen in DPSC lineages isolated from the same donor, but the teeth were in different stages of root development. We also did not observe any changes in the ability of cells to differentiate into mature cell lines-chondrocytes, osteocytes, and adipocytes. This study is the first to analyze the heterogeneity of DPSC dependent on a donor.

SHED promote angiogenesis in stem cell-mediated dental pulp regeneration.

Dental pulp, plays an indispensable role in maintaining homeostasis of the tooth. Pulp necrosis always causes tooth nutrition deficiency and abnormal root development, which leads to tooth discoloration, fracture or even loss. Our previous study showed implantation of autologous SHED could regenerate functional dental pulp. However, the detailed mechanism of the implanted SHED participating in dental pulp regeneration remains unknown. In this study, we implanted SHED in a porcine dental pulp regeneration model to evaluate the regenerative effect and identify whether SHED promoted angiogenesis in regenerated dental pulp. Firstly we verified that xenogenous SHED had the ability to regenerated pulp tissue of host in vivo. Then we found the vasculature in regenerated pulp originated from implanted SHED. In addition, stem cells were isolated from regenerated dental pulp, which exhibited good multi-differentiation properties and promoted angiogenesis in pulp regeneration process and these results demonstrated that SHED promoted angiogenesis in stem cell-mediated dental pulp regeneration.

Evaluation of the regenerative potential of dentin conditioning and naturally derived scaffold for necrotic immature permanent teeth in a dog model.

This study evaluated the outcome of partial exposure of dentin matrix to ethylenediaminetetraacetic acid (EDTA) and application of platelet-rich fibrin (PRF) scaffold on regeneration of necrotic immature permanent teeth in a dog model. The present study was carried out on 216 permanent immature roots in nine mongrel dogs aged 6-9 months. Pulp necrosis and periapical pathosis were induced in 180 roots. These roots were divided into five equal groups (36 roots each) according to the treatment protocol: group I: blood clot; group II: 17% EDTA solution and blood clot; group III: PRF; group IV: 17% EDTA solution and PRF; and group V: without treatment (positive control). The negative control group (group VI) represented 36 untouched normal roots for normal maturation. The groups were followed up for 1, 2 and 3 months (subgroups). Maturation of the roots was monitored by radiography and histopathology. All data were statistically analysed. Group IV exhibited the highest increase in root length and thickness, decrease in apical diameter, the highest score of vital tissue infiltration and least inflammatory scores. There was a significant difference regarding the increase in root length and thickness and decrease in apical diameter in all subgroups of the experimental and negative control groups (P ≤ .05). PRF has a better regenerative potential than the blood clot during treatment of immature permanent teeth with necrotic pulp. Inclusion of 17% EDTA solution as a final irrigation enhances the regenerative potential of both PRF and blood clot.

Long non-coding RNA MALAT1 promotes odontogenic differentiation of human dental pulp stem cells by impairing microRNA-140-5p-dependent downregulation of GIT2.

Accumulating research continues to highlight the notable role of microRNAs (miRs) and long non-coding RNAs (lncRNAs) as important regulators in the process of human dental pulp stem cell (hDPSCs) differentiation. The current study aimed to investigate the novel regulatory circuitry of lncRNA metastasis-associated lung adenocarcinoma transcript 1 (MALAT1)/miR-140-5p/G protein-coupled receptor (GPCR)-kinase 2 interacting protein 2 (GIT2) on the odontogenic differentiation of hDPSCs. In hDPSCs, miR-140-5p was downregulated during the odontogenic differentiation, which was verified to directly target GIT2. RNA crosstalk determined by dual-luciferase reporter and RNA pull-down assays revealed that MALAT1 could bind to miR-140-5p to upregulate the expression of GIT2. After that, the levels of MALAT1, miR-140-5p, and GIT2 in hDPSCs were up- or downregulated by exogenous transfection or lentivirus infection in order to investigate their effects on the differentiation of hDPSCs. It was observed that elevation of miR-140-5p or knockdown of GIT2 resulted in inhibited alkaline phosphatase (ALP) activity, expression of dentin sialophosphoprotein (DSPP), dentin matrix-protein-1 (DMP-1), and distal-less homeobox 3 (DLX3) as well as positive expression of desmoplakin (DSP) protein. The promotive effects of MALAT1 on odontogenic differentiation were diminished by restoration of miR-140-5p or inhibition of GIT2. Taken together, this study provides valuable evidence suggesting MALAT1 as a potential contributor to the odontogenic differentiation of hDPSCs.

Hand-held bioprinting for de novo vascular formation applicable to dental pulp regeneration.

Aim of the study: Deep carious lesions may cause irreversible pulpitis and the current endodontic treatment typically removes the whole dental pulp tissue, which finally reduces lifespan of the teeth. Nowadays, the most frequent treatment is based on removing the infected tissue and filling the root canal with inert synthetic materials. Tissue engineering approaches are important alternatives to the current treatment, because they can potentially maintain the biological function of the tooth instead of sacrificing it.Materials and Methods: In this study, we propose a tissue engineering approach based on a hand-held in situ bioprinting strategy. Our approach enabled bioprinting of cell-loaded collagen-based bioinks with suitable rheological, structural and biological properties, which allowed for vasculogenesis in the root canal.Results: The rheological properties of the bioprintable bioink were measured by oscillatory amplitude sweep testing and were corroborated by macroscopic evaluation after in vitro culture, in which printed bioinks maintained their original form without contraction. Moreover, we showed evidence for successful vasculogenesis in bioprintable bioinks with comparable quality and quantity to control fibrin and collagen non-bioprintable hydrogels.Conclusions: We conclude that hand-held bioprinting holds potential for in situ treatment of dental diseases with successful evidence for vascular tube formation, as an asset for maintenance of the biological function of the tooth.

Immunohistochemistry and gene expression of GLUT1, RUNX2 and MTOR in reparative dentinogenesis.

OBJECTIVES: To determine glucose transporter 1 (GLUT1) and runt-related transcription factor 2 (RUNX2) expression during reparative dentinogenesis after pulpotomy with mineral trioxide aggregate (MTA) capping. SUBJECTS AND METHODS: Eight-week-old male Wistar rats were used. Pulp of the upper left first molar was exposed and capped with MTA. The upper right first molar of the same animal was used as a control. After collecting molars at various time points, GLUT1, RUNX2 and mammalian target of rapamycin (MTOR) were examined by immunohistochemistry. mRNA levels of Slc2a1 (encoding GLUT1), Runx2, Nestin and Mtor were determined by real-time PCR. RESULTS: Pulp exhibited progressive formation of reparative dentine lined with GLUT1- and MTOR-immunoreactive odontoblast-like cells at 5 days after pulpotomy. RUNX2 was detected in nuclei of most pulp tissue cells at day 5 after pulpotomy. Double immunofluorescence staining revealed GLUT1 immunoreactivity on odontoblast-like cells positive for Nestin or RUNX2, 5 days after pulpotomy. Slc2a1, Runx2, Nestin and Mtor mRNA levels were significantly upregulated on days 3-5 after pulpotomy. CONCLUSIONS: After rat molar pulpotomy, dental pulp induced formation of reparative dentine with colocalization of GLUT1 and Nestin or RUNX2. Moreover, mRNA levels of Slc2a1, Runx2, Nestin and Mtor were significantly upregulated in pulpotomized dental pulp.