Diving into Batch-to-Batch Variability of Topical Products-a Regulatory Bottleneck.

PURPOSE: Following the recent European Medicine Agency (EMA) draft guideline on quality and equivalence of topical products, a modular framework for bioequivalence assessment is proposed, wherein the qualitative, quantitative, microstructure and product performance sameness is demanded to support generic applications. Strict regulatory limits are now imposed, but, the suitability of these limits has been subject of intense debate. In this context, this paper aims to address these issues by characterizing a panel of 8 reference blockbuster semisolid topical products. METHODS: For each product, three batches were selected and, whenever possible, batches retrieved from different manufacturing sites were considered. Product microstructure was evaluated in terms of globule size, pH, rheological attributes and, if required, the thermal behaviour was also assessed. Performance was evaluated through in vitro release testing (IVRT). Finally, an integrated multivariate analysis was performed to highlight the features that most contribute for product variability. RESULTS: Marked differences were registered within reference products. Statistical analysis demonstrated that if EMA criteria are applied, none of the same product batches can be considered as equivalent. Rheological parameters as well as IVRT indicators account for the majority of batch-to-batch differences. CONCLUSIONS: Semisolid dosage forms exhibit intrinsic variability. This calls for the attention to the need of establishing reasonable equivalence criteria applied to generic drug products. Graphical abstract.

Development of a Logic Model for Promoting Incorporation of the Concepts of Impurity-Related ICH Guidelines into Pharmacopoeias Based on Cause and Effect Analysis.

In line with the recent globalization of the drug supply chain and promotion of the use of generic drugs worldwide, quality assurance is required for drugs globally. In particular, controlling impurities is one of the biggest areas of interest regarding pharmaceutical quality, and it is desirable that the latest scientific standards harmonized in the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) are not only implemented in approval applications but also incorporated in pharmacopoeias which are public standards to ensure pharmaceutical quality more widely. However, incorporation into a pharmacopoeia takes time because careful consideration is required owing to the characteristics of a pharmacopoeia that is widely used for drugs, including those already on the market. To consider a smooth approach for the incorporation, we retrospectively examined approaches to incorporate the concepts of the ICH Q3C, Q3D, and M7 guidelines covering residual solvents, elemental impurities, and mutagenic impurities which are particularly toxic impurities into the European Pharmacopoeia, United States Pharmacopeia-National Formulary, and Japanese Pharmacopoeia, with approaches to implement these guidelines into approval processes in Europe, the U.S., and Japan. We also identified barriers and facilitators to this goal via cause and effect analysis. Moreover, we developed a logic model for the smooth incorporation of the concepts of impurity-related ICH guidelines. We expect that our proposed approach will be applied as a framework to smoothly incorporate the results of international harmonization activities for controlling impurities into each pharmacopoeia.

Evaluation of Dissolution Profile between Original and Generic Products of Zolpidem Tartrate by Microdialysis-HPLC.

The evaluation of the dissolution profile of hypnotic drugs is important to promote switching from original products to generic products by removing distrust in generic hypnotics. In this study, we investigated differences in the dissolution profiles between original and generic products (GE-D, GE-S, and GE-T) in commercially available zolpidem tartrate (ZOL) products using the HPLC method using a connected microdialysis probe (microdialysis-HPLC method). Although the degree of hardness and the disintegration time were not different among the original, GE-S, and GE-T, GE-D was 1.4 times harder than the other products. The disintegration time of GE-D was approximately twice as long as that of the original product. Generic products dissolved rapidly as compared with the original product, however, the dissolution rate in the ZOL powder (milled ZOL product) was not different between the original and generic products. Macrogol 6000 (polyethylene glycol (PEG)-6000) was used in the generic products, and this additive was the only PEG difference from the original product. We investigated whether the PEG in the product affected the solubility of ZOL and found that the addition of PEG-4000 or PEG-6000 significantly increased the dissolution rate. These results suggest that the solubility of ZOL may be increased by PEG when the product is disintegrated, resulting in the increased dissolution rate in the generic products. In conclusion, we found that the difference of PEG affected the dissolution profile in the disintegration process using the microdialysis-HPLC method. This finding can help ensure the safety of milled products and the selection of additives.

About the equivalence between different batches of a glycopeptide drug.

CONTEXT: Teicoplanin is a glycopeptide antibiotic consisting of a combination of different active components. Clinical equivalence between different batches of this drug is not guaranteed by the present pharmacopeial specification of chemical composition based on an HPLC chromatogram. OBJECTIVE: To test a modification of this specification and to evaluate independent compositions recently published in the literature. MATERIALS AND METHODS: The expectable area under the plasma curve of each batch has been estimated based on its chemical composition as described in a former paper. Batch-comparisons are based on ratios between the area of the test batch and the area of a reference. RESULTS AND DISCUSSION: The modification of this specification recently proposed by the European Medicines Agency (EMA) has been tested confirming its goodness. A new acceptance range of AUC variation, rounding -10% to +15%, has been obtained. It is narrower than the current interval of the pharmacopeial specification. Concerning the generic batches that have been studied, the majority of differences with the reference is lower than ±10%. Variations in the compositions of the reference product have been observed to influence the results and a control criteria are proposed. CONCLUSION: The variability of the pharmacokinetic performance of teicoplanin can be better controlled with this new proposal of composition specification given by EMA.

Differentiation of generic enoxaparins marketed in the United States by employing NMR and multivariate analysis.

The U.S. Food and Drug Administration defines criteria for the equivalence of Enoxaparin with Lovenox, comprising the equivalence of physiochemical properties, heparin source material and mode of depolymerization, disaccharide building blocks, fragment mapping and sequence of oligosaccharide species, biological and biochemical assays, and in vivo pharmacodynamic profile. Chemometric analysis of the NMR spectra, utilizing both (1)H and (1)H-(13)C HSQC NMR experiments, of Lovenox and Enoxaparin, the latter being the generic version of the former, revealed that Lovenox and the four Enoxaparin compounds produced by Sandoz (Enoxaparin and Fibrinox), Winthrop, and Amphastar exhibit dissimilarities in terms of their composition. All of the collected samples had expiry dates between 2012 and 2015. These studies, in addition to chromatographic analysis, highlighted signatures that differentiated the branded material from the generic products.

The comparison of brand-name and generic formulations of venlafaxine: a therapeutic drug monitoring analysis.

OBJECTIVE: Venlafaxine (VEN) is a widely used antidepressant drug, which is available in both brand-name and generic formulations. Bioequivalence studies indicate some pharmacokinetic variability. However, naturalistic therapeutic drug monitoring studies of different generic formulations are lacking. METHODS: In 2010, inpatients of the Department of Psychiatry, Psychosomatics, and Psychotherapy, University Hospital of Würzburg, were treated with either slow-release brand-name VEN (Trevilor) or slow-release generic VEN (Venlafaxin Hexal) depending on the respective inpatient ward. Routine therapeutic drug monitoring analyses of both groups were compared after matching samples regarding dose of VEN, gender, age, smoking habits, and evaluation of co-medication. RESULTS: Both groups did not differ in mean values of VEN, O-desmethyl-VEN (ODV), VEN + ODV serum concentrations, and ODV/VEN ratio. No difference in dose-corrected serum concentrations between generic and brand-name VEN was revealed for males, females, smokers, or nonsmokers. In both groups, Spearman Rho correlation between VEN dose and VEN + ODV serum concentration was moderate but significant (P < 0.001; generic: r = 0.554; brand name: r = 0.668). Within the generic subgroup, females had a significantly higher dose-corrected serum concentration of VEN (U test, P < 0.05), whereas within brand name, no gender influence was detected. Spearman Rho correlation of age and dose-corrected ODV (P < 0.05) and VEN + ODV (P < 0.05) was significant only in the generic group. In the brand-name sample, smokers had significantly lower dose-corrected serum concentrations of ODV (U test, P < 0.01) and VEN + ODV (P < 0.01). In the generic group, smoking habit was without any influence. DISCUSSION: No differences in serum concentrations in dependence of either VEN formulations suggest a safe and efficient treatment of patients using the evaluated generic VEN. However, differences within one formulation regarding gender, age, and smoking status suggest variability of serum concentrations and thus could endanger safety and efficacy of drug use.

Challenges and opportunities to use biowaivers to compare generics in China.

Biowaivers for class I drugs according to the biopharmaceutics classification system (BCS) were first introduced in 2000. The in vitro equivalence can be used to document bioequivalence between products. This study compared the in vitro dissolution behavior of two BCS class I drugs, amoxicillin and metronidazole, which are sold in China. Identifying a reference product on the Chinese domestic market was impossible. Three 250-mg and two 500-mg amoxicillin capsules and four metronidazole tablet products were tested. None of the amoxicillin products and three of the four metronidazole tablets were found to be equivalent to each other when the same strengths were compared. The bioequivalence of products that fail the in vitro test can be established via in vivo clinical studies which are expensive and time consuming. Establishing nationally or globally accepted reference products may provide regulatory agencies with an efficient mechanism approving high quality generics.

[Comparative investigation of rheological characteristics of the original drug Triderm and its generics in the form of cream].

Rheological properties of mild pharmaceutical formulations (creams) with glucocorticosteroids, such as Triderm (Belgium), Akriderm GK (Russia) and Kanizon plus (India) were studied. The study revealed differences in the structural-strength properties of the medicines (viscosity, critical shear stress). The necessity of rheological investigations during development of generic medicines was shown.

In vitro dissolution equivalence of Jordanian sildenafil generics via validated, stability-indicating HPLC method.

This study was conducted to compare dissolution profiles of four Jordanian registered sildenafil (SDF) products to the originator. Dissolution samples were analyzed utilizing a validated and stability-indicating HPLC method in human plasma. Validation was performed for specificity, linearity, limit of detection, lower limit of quantification, precision, trueness and stability. SDF was extracted from plasma samples using liquid-liquid extraction. The analysis was performed utilizing isocratic elution on C18 column with 1.0 ml/min flow rate. The regression value was ∼0.999 over 3 days with drug recovery between 86.6 to 89.8%with 10 ng/ml lower limit of quantitation. This method displayed a good selectivity of SDF with improved stability under various conditions. The method was used for SDF quantification in dissolution medium. Similarity factors for local products varied according to the used mediums, but all SDF local products passed the dissolution in vitro test since all of them showed a released of >85% after 60 min at the dissolution mediums.

[Box: see text].

Analysis of purity profiles of generic lisinopril tablets marketed in Croatia.

In view of an increasing number of generic drugs emerging, a comparative study was performed including the approved lisinopril preparations in the form of tablets marketed in Croatia, to compare purity profiles of generic drugs versus the original medicinal product. Several batches of each individual medicinal product at different stages of their shelf life were analyzed. Impurities were determined by means of high performance liquid chromatography (HPLC). Impurity profiles were demonstrated to be specific for each individual drug. Original drug, as compared to its generic copies, had the lowest values and also the lowest variability of all the tested parameters--type, total number and content of impurities--suggesting that its manufacturing process is to certain degree better controlled compared to other manufacturers. A characteristic impurity C appearing in all the assessed preparations has the lowest levels in the original drug, whereas the amount of the highest unknown impurity does not exceed 0.10% in any of the analyzed preparations. Although the original drug stands out from all the generic preparations with its purity, it can be generally concluded that, as regarding impurities levels, all the analyzed medicinal products are within the ranges of specification limits; accordingly, it is therefore not expected that, in case of lisinopril tablets, administration of the original drug as compared to any of its generic drugs, will be safer for the patient.

Predictive elution window stretching and shifting as a generic search strategy for automated method development for liquid chromatography.

We report on the possibilities of a new method development (MD) algorithm that searches the chromatographic parameter space by systematically shifting and stretching the elution window over different parts of the time-axis. In this way, the search automatically focuses on the most promising areas of the solution space. Since only the retention properties of the first and last eluting compounds of the sample need to be (approximately) known, the algorithm can be directly applied to samples with unknown composition, and the proposed solutions are not sensitive to any modeling errors. The search efficiency of the algorithm has been evaluated on an extensive set of random-generated in silico samples covering a broad range of different retention properties. Compared to a pure grid-based search, the algorithm could reduce the number of missed components by 50% and more. The algorithm has also been applied to solve three different real-world separation problems from the pharmaceutical industry. All problems could be successfully solved in a very short time (order of 12 h of instrument time).

Internet-ordered viagra (sildenafil citrate) is rarely genuine.

INTRODUCTION: Counterfeit medication is a growing problem. This study assessed the requirement for prescription, cost, origin, and content of medications sold via the Internet and purporting to be the phosphodiesterase type 5 inhibitor Viagra (sildenafil citrate). METHODS: Pfizer monitored top search results for the query "buy Viagra" on the two leading Internet search engines in March 2011. Orders were placed from 22 unique Web sites claiming to sell Viagra manufactured by Pfizer. Tablets received were assessed for chemical composition. RESULTS: No Web site examined required a prescription for purchase or a health screening survey; 90% offered illegal "generic Viagra." Cost per tablet ranged from $3.28-$33.00. Shipment origins of purchases were Hong Kong (N = 11), the United States (N = 6), and the United Kingdom (N = 2) as well as Canada, China, and India (N = 1 each). Notably, the four Internet pharmacies claiming to be Canadian did not ship medication from a Canadian address. Of 22 sample tablets examined, 17 (77%) were counterfeit, 4 (18%) were authentic, and 1 (5%) was an illegal generic. Counterfeit tablets were analyzed for sildenafil citrate, the active pharmaceutical ingredient (API) of Viagra, and contents varied between 30% and 50% of the label claim. Counterfeits lacked product information leaflets, including appropriate safety warnings, and genuine Viagra formulations. CONCLUSION: Internet sites claiming to sell authentic Viagra shipped counterfeit medication 77% of the time; counterfeits usually came from non-U.S. addresses and had 30% to 50% of the labeled API claim. Caution is warranted when purchasing Viagra via the Internet.

Comparison between original and generic versions of ceftriaxone sodium preparation for injection: compatibility with calcium-containing product.

The purpose of this study was to compare the compatibility of ROCEPHINE® Intravenous, the original manufacturer's ceftriaxone sodium preparation for injection, and seven generic versions thereof, with various calcium chloride injection 2%. The influence of calcium ion concentration, storage time and shaking strength on the appearance and quantity of insoluble microparticles in mixed solutions was examined using a light obscuration particle counter. In all products, the observed number of insoluble microparticles was proportional to the calcium ion concentration, storage time and shaking strength after the addition of calcium chloride solution. In several of the generic products, the number of insoluble microparticles was significantly higher than those of the original product, while in others it was lower. We evaluated the quality of the original and 7 generic preparations, measured the content of impurity and pH of the various ceftriaxone solutions, as impurity content and pH of solution are possible factor affecting compatibility. Three impurities were found in all products. The impurity content of several generic products, as estimated from their peak area on high performance liquid chromatography (HPLC), was significantly lower than that of the original product. pH of solution was difference between products. Although it was difficult that impurity and pH of solution verify critical factor affecting compatibility. The results show that there are differences in the appearance of insoluble microparticles between the original product and seven generic products, when calcium chloride injection 2% solution is added to the product.

Bioequivalence and Pharmacokinetic Profiles of Generic and Branded Obeticholic Acid in Healthy Chinese Subjects Under Fasting and Fed Conditions.

OBJECTIVES: This study was conducted to evaluate the bioequivalence (BE) of a generic form of obeticholic acid (OCA) and OcalivaTM under fasting and fed conditions and to determine the effects of food on the pharmacokinetic (PK) profiles of OCA in healthy Chinese subjects. METHODS: A randomized, single-dose, three-sequence, three-period, partial replicated crossover study was conducted with a 21-day washout interval between periods under fasting (n=48) and fed (n=48) conditions. Blood samples for OCA and its metabolites Glyco-OCA and Tauro-OCA were collected up to 168 hours after administration in each period. PK parameters were calculated using the non-compartmental method. Geometric mean ratios for PK parameters of the test to reference drug under fasting and fed conditions and their 90% confidence intervals were estimated. Safety evaluations were carried out all through the study. RESULTS: A total of 91 subjects completed the study with 45 in a fasted state and 46 receiving a high-fat diet. There were no serious or unexpected drug-related adverse events occurring during the study. There was no significant difference in the main PK parameters of the two preparations, irrespective of the fasting or fed conditions. Under fasting and fed conditions, the SWR of lnCmax, lnAUC0-t and lnAUC0-∞ were 0.445, 0.370, 0.448, 0.340, 0.168, and 0.180, respectively. Thus, the average BE or the reference-scaled average BE was used to verify that the two preparations were bioequivalent under fasting and fed conditions. Compared with the fasting state, the AUC0-t of the test drug, the AUC0-t, and AUC0-∞ of the reference drug were higher in the fed state. CONCLUSION: The test drug and the reference drug were BE and well tolerated in Chinese healthy subjects under both fasting and fed conditions. Food-intake may cause a significant difference in the main PK parameters of the two preparations.

Consumers' Perception of Generic Medicines and Evaluation of In Vitro Quality Control Parameters of Locally Manufactured Paracetamol Tablets in Asmara, Eritrea: A Cross-Sectional Study.

Generic medicines are clinically equivalent and can be used interchangeably for their intended use. Globally, the usage of generic medicines is highly recommended because of their affordability and accessibility. However, consumers hold a negative perception and attitude of using generic medicine as they consider it poor and having inferior quality compared to branded medicines. This study was conducted to assess the consumers' general view of generic medicines and in vitro evaluation of a locally produced generic medicine, paracetamol. An analytical and cross-sectional study was conducted in three selected hospitals, and in vitro quality control evaluation was done in National Drug Quality Control Laboratory between October 26 and November 21, 2017, in Asmara, Eritrea. A systematic random sampling design was employed, and the data was collected using a questionnaire and a check-list for recording the quality control parameters of paracetamol tablets. A total of 403 respondents were included in the study. The majority of the study participants were females (61.8%). Generally, about half (49.1%) of the respondents choose locally manufactured paracetamol over the imported ones. More than half (68.5%) of the respondents did not believe expensive medicines are of better quality. The main reason consumers prefer the local paracetamol (Azemol) tablet to the imported one was due to their good experience (62.1%). About three-fourths (78.1%) of the consumers also believed that medicines manufactured abroad confer higher quality. At the multivariate level, having educational backgrounds such as elementary (AOR = 4.19, 95% CI: 1.251, 14.035) and junior (AOR = 2.4, 95% CI: 1.146, 5.028) was associated with preferability to local paracetamol as a pain killer over the brand ones. The in vitro test of the local paracetamol met the standard specification for the identification test, weight variation test, pharmacopeial test, friability test, disintegration test, and dissolution test. In conclusion, the majority of the consumers considered local paracetamol as having an inferior quality when compared with brand paracetamol. However, the reality revealed that the local paracetamol was of the same quality as the brand ones. To facilitate widespread use of generic medicines, healthcare professionals should educate consumers on the advantages of these medicines.

Qualitative and quantitative comparison of brand name and generic protein pharmaceuticals using isotope tags for relative and absolute quantification and matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometry.

The capability of iTRAQ (isotope tags for relative and absolute quantification) reagents coupled with matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometry (MALDI-TOF/TOF-MS) as a qualitative and quantitative technique for the analysis of complicated protein pharmaceutical mixtures was evaluated. Mixtures of Somavert and Miacalcin with a small amount of bovine serum albumin (BSA) as an impurity were analyzed. Both Somavert and Miacalcin were qualitatively identified, and BSA was detected at levels as low as 0.8mol%. Genotropin and Somavert were compared in a single experiment, and all of the distinct amino acid residues from the two proteins were readily identified. Four somatropin drug products (Genotropin, Norditropin, Jintropin, and Omnitrope) were compared using the iTRAQ/MALDI-MS method to determine the similarity between their primary structures and quantify the amount of protein in each product. All four product samples were well labeled and successfully compared when a filtration cleanup step preceded iTRAQ labeling. The quantitative accuracy of the iTRAQ method was evaluated. In all cases, the accuracy of experimentally determined protein ratios was higher than 90%, and the relative standard deviation (RSD) was less than 10%. The iTRAQ and global internal standard technology (GIST) methods were compared, and the iTRAQ method provided both higher sequence coverage and enhanced signal intensity.

Microbiological equivalence of serum bacteriostatic and bactericidal activities of the sera from healthy volunteers receiving original meropenem (Meronem) and generic meropenem (Mero).

BACKGROUND: Several generic meropenem formulations have been approved by Thai Food and Drug Administration, Ministry of Public Health since 2008. Meropenem is a parenteral drug. Therefore, a study demonstrating a biological equivalence of generic meropenem is not required for drug registration in Thailand. The objective of the study was to determine microbiological equivalence of serum bacteriostatic and bactericidal activities of the sera from healthy volunteers receiving original meropenem (Meronem) and generic meropenem (Mero). MATERIAL AND METHOD: This was a randomized crossover study in 16 adult healthy volunteers. Each subject received one gram of Meronem and Mero in 50 ml of normal saline via intravenous infusion for 30 minutes. The blood samples were drawn at baseline prior to receiving the study drug, at 30 minutes after initiating infusion, and at 8 hours after initiating infusion. The serum bacteriostatic activity against E. coli ATCC 25922, K. pneumoniae, P. aeruginosa ATCC 27853 and A. baumannii was performed by disk diffusion. The serum bactericidal activity against E. coli ATCC 25922 was performed by Serum Bactericidal Titre. RESULTS: The average inhibition zone diameter of the serum samples from the subjects while receiving Mero against each tested organisms was < 1 mm smaller than that while receiving Meronem and such difference was not significantly different. All serum samples taken at 30 minutes after initiating Meronem and Mero had bactericidal titres against E. coli ATCC 25922 > or = 1:256. Only 3 serum samples taken from the subjects while receiving Mero at 8 hours had less bactericidal titre for 1-fold dilution when compared with that of Meronem. CONCLUSION: The sera from healthy volunteers receiving Meronem and Mero had microbiological equivalence in terms of serum bacteriostatic and bactericidal activities.

[Contributions of the Japanese Pharmacopoeia to the Quality of Generic Pharmaceuticals].

The rapid increase in the use of ethical generic pharmaceutical formulations in Japan emphasizes the importance of measures to ensure the quality of pharmaceutical distribution. This short review discusses the contributions of the Japanese Pharmacopoeia (JP) to pharmaceutical quality control. Numerous monographs have defined specifications and tests for multiple active pharmaceutical ingredients and excipients. Standardized methods of performing general tests and reference standards allow efficient, reliable evaluation of pharmaceutical quality during development processes and commercial manufacturing. Some new methods of characterizing the structure and performance of nonbiological complex drugs have been included in recent editions. An introduction to general tests and general information regarding the control of impurities in accordance with the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines should significantly reduce the safety risks of pharmaceuticals.

Quality Testing of Difficult-to-Make Prescription Pharmaceutical Products Marketed in the US.

Importance: Health care practitioners and patients must have information to support their confidence in the quality of prescription pharmaceuticals. Objective: To determine whether there were clear and substantive differences in major quality attributes between difficult-to-make solid oral dosage form pharmaceutical products marketed in the US. Design, Setting, and Participants: This quality improvement study analyzed US Food and Drug Administration-collected samples of 252 drug products marketed in the US and manufactured in the US, Canada, Europe, India, and the rest of Asia. These drug products were immediate-release solid oral dosage forms considered difficult to make on the basis of product quality history. This sampling included 35 innovator and 217 generic drug samples manufactured by 46 different firms containing 17 different active ingredients. Statistical analysis was performed from February to November 2019. Main Outcomes and Measures: All products were tested within their shelf life on the basis of the legally recognized tests of the US Pharmacopeia for the major quality attributes of dosage unit uniformity and dissolution. These tests measure dosage consistency and drug release, respectively. The consistency of either attribute was used to calculate a process performance index to describe the variability in manufacturing. Results: All 252 drug product samples met the US market standards for dosage unit uniformity and dissolution, although the process performance index (Ppk) for dissolution fell below the level of 4-sigma capability (ie, <1 error per 1600) for 11 different manufacturers and for generics in 4 of 5 regions, including the US. As part of a retrospective analysis, manufacturers performing above the median Ppk for either dissolution or dosage unit uniformity submitted fewer product quality defect reports (mean field alert reports of 0.22 and 0.63, respectively) than those falling at or below the median Ppk for these attributes (mean field alert reports of 2.1 and 1.7, respectively). Conclusions and Relevance: All samples met the US market standards for dosage unit uniformity and dissolution, indicating acceptability for use by patients regardless of manufacturer or region. To our knowledge, this is the largest sampling study of pharmaceutical manufacturers for the US market and these data provide objective insight into the quality of prescription drugs with high manufacturing risks.

Determination of Amino Acid Composition of Ganirelix Acetate in an Injectable Formulation by Pre-column Derivatization with 6-Aminoquinolyl-N-hydroxysuccinimidyl Carbamate.

Ganirelix is a synthetic decapeptide linked with nine different amino acids. To understand the peptide amino acid sequence or primary structure, the first step is to determine the amino acid composition of the peptide which can be a determining factor for the peptide immunogenicity. Edman degradation is not a suitable analytical technique to identify amino acid sequence present in Ganirelix due to the absence of uncharged N-terminal amino group. To address this challenge, a pre-column derivatization method was developed with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate reagent. In the present work, the Ganirelix active pharmaceutical ingredient present in the injectable formulation was isolated by fraction collection and further purified by flash chromatography. The amino acid composition of Ganirelix is assayed by carrying out acid hydrolysis with 6 mol L-1 hydrochloric acid solution containing 1% phenol at 100°C for 24 h and derivatization with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate reagent solution, followed by determination of individual amino acids by reverse-phase chromatography using a C18 column. High resolution was achieved for the nine amino acid mixture. The amino acid composition results of temperature-stressed Ganirelix generic product and reference listed drug are in good agreement with the theoretical molar ratio of label information.