Polarization enhancement mechanism from tissue staining in multispectral Mueller matrix microscopy.

Mueller matrix microscopy can provide comprehensive polarization-related optical and structural information of biomedical samples label-freely. Thus, it is regarded as an emerging powerful tool for pathological diagnosis. However, the staining dyes have different optical properties and staining mechanisms, which can put influence on Mueller matrix microscopic measurement. In this Letter, we quantitatively analyze the polarization enhancement mechanism from hematoxylin and eosin (H&E) staining in multispectral Mueller matrix microscopy. We examine the influence of hematoxylin and eosin dyes on Mueller matrix-derived polarization characteristics of fibrous tissue structures. Combined with Monte Carlo simulations, we explain how the dyes enhance diattenuation and linear retardance as the illumination wavelength changed. In addition, it is demonstrated that by choosing an appropriate incident wavelength, more visual Mueller matrix polarimetric information can be observed of the H&E stained tissue sample. The findings can lay the foundation for the future Mueller matrix-assisted digital pathology.

Optimized Degradation of Eosin Dye Through UV-ZnO NPs Catalyzed Reaction.

The present study is set out to determine the photocatalytic degradation potential of ZnO nanoparticles for effective degradation of Eosin dye. The heterogeneous photocatalytic experiments were carried out by irradiating aqueous dye solutions with ultraviolet light. The influence of effective parameters like flow rate, pH, catalyst dose, and dye concentration was examined. The best degradation efficiency (66.82%) of ZnO Nanoparticles against Eosin dye was achieved within 90 min of reaction time. The Box-Behnken design under the Response Surface Methodology (RSM) was chosen as a statistical tool to obtain the correlation of influential parameters. The optimum values were recorded as follows: 0.59 g, 15.75 ppm and 136.12 ml/min for amount of catalyst, dye concentration and flow rate, respectively. The maximum percent degradation achieved at these conditions was 71.44%.

Biochemical, Cellular, and Proteomic Characterization of Hereditary Spherocytosis Among Tunisians.

BACKGROUND/AIMS: Hereditary Spherocytosis (HS) is the most common erythrocyte membrane disorder causing hemolytic anemia. The wide heterogeneity of both clinical and laboratory manifestations of HS contributes to difficulties associated with the diagnosis of this disorder. Although massive data previously reported worldwide, there is yet no data on HS among the Tunisian population. Here we aim to characterize HS in Tunisian patients at biochemical and cellular levels, identify the membrane protein deficiency, and compare the accuracy of the diagnostic tests to identify the most appropriate assay for HS diagnosis. METHODS: We investigated 81 patients with hemolytic anemia and 167 normal controls. The exploration of HS based on clinical and family history, physical examination, and the results of laboratory tests: blood smear, osmotic fragility test (OFT), cryohemolysis test (CT), pink test (PT), eosine-5'-maleimide (EMA) test, and erythrocyte membrane protein electrophoresis. RESULTS: We identified 21 patients with HS, classified as severe (6/21;28.5%), moderate (10/21;47.6%), and mild (5/21;23.8%). The most prevalent protein deficiency was the band 3 protein detected in ten Tunisian HS patients. The EMA test showed a high specificity (97.5%) and sensitivity (94.7%) for HS diagnosis compared to the other screening tests. Interestingly, fourteen among sixteen patients presenting with homozygous sickle cells HbSS showed an increase of EMA fluorescence intensity compared to other anemic patients. CONCLUSION: Our study highlights the efficiency of the EMA dye for the detection of HS whatever the nature of the involved protein deficiency. We report for the first time, the most prevalent protein deficiency among Tunisians with HS. Moreover, we found that the combination of the EMA-binding test with PT or incubated OFT improves the diagnosis sensitivity while maintaining a good specificity.

Investigating eosin Y as a photocatalyst for the radical-dependent activity-based probing of deubiquitinating enzymes.

Eosin Y was assessed for its ability to induce a thiol-ene dependent protein-protein reaction in a metal-free, oxygen-tolerant, visible light mediated system. Protein-protein coupling efficiency under these mild conditions was comparable to previously reported UV-dependent conditions. The desired thiol-ene reaction was however limited within more complex biological systems.

A resonance Rayleigh scattering and fluorescence quenching dual-channel sensor for sensitive detection of chitosan based on Eosin Y.

The sensitive chitosan (CTS) detection methods based on the resonance Rayleigh scattering (RRS) quenching method and fluorescence quenching of Eosin Y were put forward. In the HAC-NaAC buffer solution, Eosin Y interacted with Triton X-100 to generate the binary complex which served as the RRS spectral probe. When CTS was interacted with the binary complex, the RRS intensity decreased with the increase of CTS. At the same time, the fluorescence intensity of Eosin Y decreased in the presence of Triton X-100, and the fluorescence intensity of "Eosin Y+Triton X-100" system further decreased when CTS was added. So it was further proved that there was a forming complex in "Eosin Y+Triton X100+CTS" system. The interaction was characterized by zeta potential, RRS, fluorescence spectrum, and UV-Vis spectroscopy. Under optimal conditions, there was a good linear relationship between the RRS decreased intensity (ΔI) and the concentration of CTS in the range of 0.05-1.30 µg/mL, with a regression equation of ΔI = 1325c + 73.66 and correlation coefficient (R2) of 0.9907. The detection limit was 0.0777 µg/mL. Likewise, the linear range of the fluorescence quenching was 0.03-1.30 µg/mL; the regression equation was ΔF = 1926c + 294.0 with R2 = 0.9800 under fluorescence quenching. The detection limit was 0.0601 µg/mL. Therefore, the dual-channel sensor for the determination of CTS was applied to the health products, and the results were satisfactory. The t test result showed that there was no statistical difference between the two methods.

Metal-free visible-light-mediated organophotoredox catalysis: synthesis of 3-functionalized indole via C-C, C-N bond formation.

A visible-light-mediated, mild and one-pot three-component reaction in the presence of organophotoredox catalyst Eosin Y using EtOH:H2O as reaction medium for the synthesis of 3-functionalized indole derivatives was developed. Visible light used in the protocol is green, inexpensive, readily available energy source. The sustainable reagents make the protocol compatible with green chemistry demands.

Three-dimensional virtual histology enabled through cytoplasm-specific X-ray stain for microscopic and nanoscopic computed tomography.

Many histological methods require staining of the cytoplasm, which provides instrumental details for diagnosis. One major limitation is the production of 2D images obtained by destructive preparation of 3D tissue samples. X-ray absorption micro- and nanocomputed tomography (microCT and nanoCT) allows for a nondestructive investigation of a 3D tissue sample, and thus aids to determine regions of interest for further histological examinations. However, application of microCT and nanoCT to biological samples (e.g., biopsies) is limited by the missing contrast within soft tissue, which is important to visualize morphological details. We describe an eosin-based preparation overcoming the challenges of contrast enhancement and selectivity for certain tissues. The eosin-based staining protocol is suitable for whole-organ staining, which then enables high-resolution microCT imaging of whole organs and nanoCT imaging of smaller tissue pieces retrieved from the original sample. Our results demonstrate suitability of the eosin-based staining method for diagnostic screening of 3D tissue samples without impeding further diagnostics through histological methods.

Genes regulating hormone stimulus and response to protein signaling revealed differential expression pattern during porcine oocyte in vitro maturation, confirmed by lipid concentration.

Genes influencing oocyte maturation may be valuable for predicting their developmental potential, as well as discerning the mechanistic pathways regulating oocyte development. In the presented research microarray gene expression analysis of immature and in vitro matured porcine oocytes was performed. Two groups of oocytes were compared in the study: before (3 × n = 50) and after in vitro maturation (3 × n = 50). The selection of viable oocytes was performed using the brilliant cresyl blue (BCB) test. Furthermore, microarrays and RT-qPCR was used to analyze the transcriptome of the oocytes before and after IVM. The study focused on the genes undergoing differential expression in two gene-ontology groups: "Cellular response to hormone stimulus" and "Cellular response to unfolded protein", which contain genes that may directly or indirectly be involved in signal transduction during oocyte maturation. Examination of all the genes of interest showed a lower level of their expression after IVM. From the total number of genes in these gene ontologies ten of the highest change in expression were identified: FOS, ID2, BTG2, CYR61, ESR1, AR, TACR3, CCND2, EGR2 and TGFBR3. The successful maturation of the oocytes was additionally confirmed with the use of lipid droplet assay. The genes were briefly described and related to the literature sources, to investigate their potential roles in the process of oocyte maturation. The results of the study may serve as a basic molecular reference for further research aimed at improving the methods of oocyte in vitro maturation, which plays an important role in the procedures of assisted reproduction.

Molecular analysis of H&E- and Papanicolau-stained samples-systematic review.

Molecular pathology allows the identification of causative agents in infectious diseases and detection of biomarkers important for prediction of disease susceptibility, diagnosis and personalized therapy. Accordingly, nucleic acid-based methods have gained a special role in clinical laboratories particularly to evaluate solid and hematological tumors. Extraction of nucleic acids is commonly performed in microdissected formalin-fixed paraffin-embedded (FFPE) or cytological samples that had been previously evaluated through the use of hematoxylin and eosin (H&E) or Papanicolau (Pap) stains, respectively. Although the effect of both stains on nucleic acids integrity has been explored by several authors, the results are not consistent and require further examination. Accordingly, the goal of this review was to assess the influence of H&E and Pap stains on DNA and RNA integrity and to address the mechanism by which each staining compromises molecular based-analysis. The analyzed studies demonstrate that H&E- and Pap-staining result in low DNA recovery and some degree of DNA fragmentation. Additionally, it is concluded that hemalum inhibits PCR by interfering with DNA extraction, preventing DNA polymerase attachment and possibly by rescuing divalent cations. Accordingly, proper sample purification and adjustment of PCR conditions are of key importance to achieve satisfactory results by PCR in H&E- and Pap-stained samples. Furthermore, although H&E results in RNA fragmentation, it is possible to perform expression analysis in H&E-stained frozen sections, using RNase-free conditions, low amounts of hematoxylin and a rapid protocol from sample collection to RNA analysis. It The effect of Pap-staining on RNA integrity remains to be determined.

A simple morphometric analysis method for dermal microstructure using color thresholding and moments.

BACKGROUND: Proper assessment of dermal collagen fibers by dermatologists and researchers is essential. Histologic evaluation methods have limitations. We present a simple method for measurement of collagen fibers in human skin using Masson's trichrome staining. MATERIALS AND METHODS: Normal skin specimens from a cadaver were processed with Masson's trichrome, which can effectively stain collagen fibers blue with aniline dye. Optical photomicrographs of these slides were analyzed using ImageJ software. Color image processing, a histogram-based function of ImageJ for image segmentation, was performed with color moments thresholding technique. We selected blue areas by adjusting the blue channel to include specific values. The selected areas were highlighted and evaluated. We divided the image into layers of 0.09-mm2 areas from the top to bottom of the dermis. Each area was cropped and evaluated. RESULTS: Quantitative assessment yielded the quantitative size occupied by collagen fibers in an area of 0.09 mm2 . Calculation of the percentage in each area can be used to determine the density of collagen fibers. CONCLUSION: Measurements obtained with our method can be applied to research on dermal collagen fibers. We present a convenient quantitative assessment method for the dermal constituents in Masson's trichrome-stained slides.

Glyceryl Tristearate-Based Lipid Microparticles Loaded with the Tattoo Colorant, Acid Red 87: Colorant Retention Capacity in Excised Porcine Skin.

BACKGROUND: With the increasing diffusion of tattooing, the photolability of tattoo inks has become a critical issue, as available data indicated that several tattoo colorants are unstable under sunlight, generating potentially toxic photodegradation products. Therefore, it is desirable to enhance the photostability of coloring agents contained in tattoo inks. AIMS: Lipid microparticles (LMs) highly loaded with Acid Red 87 (C.I. 45380), a colorant used in tattoo inks, were evaluated for their effect on the colorant photoinstability. In addition, the capacity of the LMs to retain the incorporated C.I. 45380 colorant after their intradermal administration in excised porcine skin was investigated. METHODS: LMs loaded with C.I. 45380 were prepared using glyceryl tristearate as the lipidic material and phosphatidylcholine as the surfactant. Non-encapsulated C.I. 45380 or the colorant-loaded LMs were irradiated with a solar simulator for photodecomposition studies or introduced in the excised porcine skin mounted in Franz diffusion cells for stability evaluation in the dermal tissue. RESULTS AND CONCLUSION: The colorant content of the microparticles was 17.7%, and their size ranged from 25 to 170 µm. The light-induced degradation of C.I. 45380 was significantly decreased by its incorporation in the LMs from 20.2 ± 5.8% to 1.9 ± 2.1%. Moreover, after intradermal injection of free or microencapsulated C.I. 45380 in the excised pig skin, the LMs reduced by 93.7% (from 24.6 to 1.5%) the quantity of the colorant diffused and hence lost in the Franz cell receptor fluid. Hence, the LM carrier efficiently retained the entrapped C.I. 45380 following incubation in the dermal region of the isolated porcine skin, which is in favor of a long-lasting tattoo. Based on these data, the incorporation of C.I. 45380 in the LMs could represent a potentially useful strategy to reduce the photodecomposition of the tattoo colorant and its harmful interactions with the skin tissue.

Use of eosin for green spectroscopic determination of mebendazole.

New, sensitive, and reliable spectroscopic methods were constructed for the fast determination of the anthelmintic drug mebendazole. The methods depended on the reaction of the amino group in mebendazole with eosin in acidic medium forming an ion pair complex. The first method, Method I, relied on quenching of the native fluorescence of eosin after reaction with mebendazole at pH 3.7 using acetate buffer. Fluorescence quenching was measured at 538 nm after excitation at 518 nm. This method showed a linear response over the concentration range 5.0-20.0 µg/ml. The second method, Method II, was based on measuring the absorbance of the formed complex at 554 nm; the method showed good linearity from 7.0 to 22.0 µg/ml. Different parameters that influenced the formation of the reaction product were carefully investigated to reach the optimized conditions. A comparison between the proposed methods and a previous spectrophotometric method was carried out and there was no significant difference between them. The methods could be applied successfully to determine mebendazole in its tablet form. Moreover, the methods used water as diluting solvent, which made them compatible with the 'green' analytical chemistry principles. No organic solvents were used throughout the study.

Adsorption Characteristics of Activated Carbon for the Reclamation of Eosin Y and Indigo Carmine Colored Effluents and New Isotherm Model.

The adsorption response of eosin Y and indigo carmine acid dyes on activated carbon as a function of system temperature for a fixed concentration was investigated at various temperatures via adsorption isotherms and their thermodynamic quantities such as enthalpy, entropy, and Gibbs free energy changes. The adsorption data were exploited to develop a new adsorption isotherm. The new isotherm was developed with the spirit of solid-liquid phase equilibrium and regular solution theory. The proposed model has four adjustable constants and correlates adsorption isotherm in terms of the system temperature and melting temperature of the dye. The effect of pH on the removal of acid dyes was reported. The pH variation was observed to affect the adsorption efficiency. The removal of eosin Y and indigo carmine decreased from 99.4% to 82.6% and 92.38% to 79.48%, respectively, when the pH of the solution varied from 2 to 12. The thermodynamic analysis of the process reveals that the process of the removal of acid dyes is exothermic and spontaneous. Moreover, the kinetics parameters of the batch process are reported.

Support Vector Machine Classification of Nonmelanoma Skin Lesions Based on Fluorescence Lifetime Imaging Microscopy.

Early diagnosis of malignant skin lesions is critical for prompt treatment and a clinical prognosis of skin cancers. However, it is difficult to precisely evaluate the development stage of nonmelanoma skin cancers because they are derived from the same tissues as a result of the uncontrolled growth of abnormal squamous keratinocytes in the epidermis layer of the skin. In the present study, we developed a linear-kernel support vector machine (LSVM) model to distinguish basal cell carcinoma (BCC) from actinic keratosis (AK) and Bowen's disease (BD). The input parameters of the LSVM model consist of appropriate lifetime components and entropy values, which were extracted from two-photon fluorescence lifetime imaging of hematoxylin and eosin (H&E)-stained biopsy sections. Different features used as inputs for SVM training were compared and evaluated. In constructing the SVM models, features obtained from the lifetime (τ2) of the second component were found to be significantly more predictive than the average fluorescence lifetime (τm) in terms of diagnostic accuracy, sensitivity, and specificity. The above findings were confirmed on the basis of the receiver operating characteristic (ROC) curves of diagnostic models. Shannon entropy was added to the SVM models as an independent feature to further improve the diagnostic accuracy. Therefore, fluorescence lifetime analysis and entropy calculations can provide highly informative features for the accurate detection of skin neoplasm disorders. In summary, fluorescence lifetime imaging microscopy (FLIM) combined with the SVM classification exhibited great potential for developing an effective computer-aided diagnostic criterion and accurate cancer detection in dermatology.

DNA-Polymer Conjugates by Photoinduced RAFT Polymerization.

Conventional grafting-to approaches to DNA-polymer conjugates are often limited by low reaction yields due to the sterically hindered coupling of a presynthesized polymer to DNA. The grafting-from strategy, in contrast, allows one to directly graft polymers from an initiator that is covalently attached to DNA. Herein, we report blue-light-mediated reversible addition-fragmentation chain-transfer (Photo-RAFT) polymerization from two different RAFT agent-terminated DNA sequences using Eosin Y as the photocatalyst in combination with ascorbic acid. Three monomer families (methacrylates, acrylates and acrylamides) were successfully polymerized from DNA employing Photo-RAFT polymerization. We demonstrate that the length of the grown polymer chain can be varied by altering the monomer to DNA-initiator ratio, while the self-assembly features of the DNA strands were maintained. In summary, we describe a convenient, light-mediated approach toward DNA-polymer conjugates via the grafting-from approach.

Visible-light activation of TiO2 by dye-sensitization for degradation of pharmaceutical compounds.

This work reports the improvement in the photon absorption and degradation of acetaminophen (ACF) and diclofenac (DFC) by photosensitizing TiO2 with two types of dyes Eosin Y (Ey) and Rhodamine B (RhB). Experimental tests were carried out in a solar simulator for three hours for different systems and both pollutants. The influences of the TiO2 concentration (100, 200 and 800 mg L-1) and the catalyst-dye ratio (2%, 5% and 10%) were investigated. The degradation of the compounds was higher in the presence of TiO2-Ey compared to the TiO2-RhB and TiO2 for both pharmaceutical compounds, which was attributed to the anionic nature of Ey. DFC total degradation was achieved using 100 mg L-1 of catalyst loading and 10% of catalyst-dye ratio and the highest ACF degradation (71%) was obtained at 800 mg L-1 of catalyst loading and 5% of catalyst-dye ratio. The photon absorption was studied for both dyes using the six-flux absorption scattering model (SFM) for estimating the LVRPA (local volumetric rate of photon absorption). This was done by modifying the apparent optical thickness equation. It was found that the presence of dye in the photocatalytic systems considerably increases the LVRPA. The rate coefficients for the degradation of pharmaceutical compounds in the presence of the organic dyes were also obtained.

Solochrome cyanine: A histological stain for cobalt-chromium wear particles in metal-on-metal periprosthetic tissues.

Metal-on-metal (MoM) hip arthroplasties produce abundant implant-derived wear debris composed mainly of cobalt (Co) and chromium (Cr). Cobalt-chromium (Co-Cr) wear particles are difficult to identify histologically and need to be distinguished from other wear particle types and endogenous components (e.g., haemosiderin, fibrin) which may be present in MoM periprosthetic tissues. In this study we sought to determine whether histological stains that have an affinity for metals are useful in identifying Co-Cr wear debris in MoM periprosthetic tissues. Histological sections of periprosthetic tissue from 30 failed MoM hip arthroplasties were stained with haematoxylin-eosin (HE), Solochrome Cyanine (SC), Solochrome Azurine (SA) and Perls' Prussian Blue (PB). Sections of periprosthetic tissue from 10 cases of non-MoM arthroplasties using other implant biomaterials, including titanium, ceramic, polymethylmethacrylate (PMMA) and ultra-high molecular weight polyethylene (UHMWP) were similarly analysed. Sections of 10 cases of haemosiderin-containing knee tenosynovial giant cell tumour (TSGCT) were also stained with HE, SC, SA and PB. In MoM periprosthetic tissues, SC stained metal debris in phagocytic macrophages and in the superficial necrotic zone which exhibited little or no trichrome staining for fibrin. In non-MoM periprosthetic tissues, UHMWP, PMMA, ceramic and titanium particles were not stained by SC. Prussian Blue, but not SC or SA, stained haemosiderin deposits in MoM periprosthetic tissues and TSGT. Our findings show that SC staining (most likely Cr-associated) is useful in distinguishing Co-Cr wear particles from other metal/non-metal wear particles types in histological preparations of periprosthetic tissue and that SC reliably distinguishes haemosiderin from Co-Cr wear debris.

Comparison of different staining methods for determination of viability on Mesocestoides vogae tetrathyridia.

Mesocestoides vogae is widely employed as a model for studying the biology, differentiation, and experimental chemotherapy of cestodes. Currently, there are few techniques to measure the viability of M. vogae metacestodes during pharmacological experiments. The aim of the present work was to evaluate and compare different staining techniques to determine objectively the viability of M. vogae tetrathyridia. Eosin (0.05% w/v), methylene blue (0.01% w/v), propidium iodide (PI, 2 µg/ml), and fluorescein diacetate (FDA, 0.5 µg/ml) solutions were tested against live, heat-killed (cultivated at 65 °C for 2 h) and thymol-treated tetrathyridia (50 and 250 µg/ml). Parasites were counted under a dissecting microscope or a fluorescence compound microscope, as appropriate. Studies by scanning electron microscope were performed to compare the ultrastructural damage with the viability of parasites. After comparing the performance of different dyes, we chose the eosin staining technique because its simplicity, rapidity, sensitivity, low cost and fidelity.

Eosin Removal by Cetyl Trimethylammonium-Cloisites: Influence of the Surfactant Solution Type and Regeneration Properties.

The effect of the counteranion of hexadecyltrimethylammonium salts on the physico-chemical properties of organoclays was investigated, using a selected natural clay mineral with a cation exchange capacity of 95 meq/100 g. The uptake amount of C16 cations was dependent on the hexadecyltrimethylammonium (C16) salt solution used, the organoclay prepared from C16Br salt solution exhibited a value of 1. 05 mmole/g higher than those prepared from C16Cl and C16OH salt solutions. The basal spacing of these organoclays was in the range of 1.81 nm to 2.10 nm, indicating a similar orientation of the intercalated surfactants, and could indicated that the excess amount of surfactants, above the cation exchange capacity of 0.95 meq/g could be adsorbed on the external surface of the clay mineral sheets. These organoclays were found to be stable in neutral, acidic, and basic media. The thermal stability of these organoclays was carried out using thermogravimetric analysis and in-situ X-ray diffraction (XRD) techniques. The decomposition of the surfactant occurred at a maximum temperature of 240 °C, accompanied with a decrease of the basal spacing value close to 1.42 nm. The application of these organoclays was investigated to remove an acidic dye, eosin. The removal amount was related to the initial used concentrations, the amount of the surfactants contents, and to the preheated temperatures of the organoclays. The removal was found to be endothermic process with a maximum amount of 55 mg of eosin/g of organoclay. The value decreased to 25 mg/g, when the intercalated surfactants were decomposed. The reuse of these organoclays was limited to four regeneration recycles with a reduction of 20 to 30%. However, noticeable reduction between 35% to 50% of the initial efficiency, was achieved after the fifth cycle, depending of the used organoclays.

Keeping the spotlight on cytochrome P450.

This review describes the recent advances utilizing photosensitizers and visible light to harness the synthetic potential of P450 enzymes. The structures of the photosensitizers investigated to date are first presented along with their photophysical and redox properties. Functional photosensitizers range from organic and inorganic complexes to nanomaterials as well as the biological photosystem I complex. The focus is then on the three distinct approaches that have emerged for the activation of P450 enzymes. The first approach utilizes the in situ generation of reactive oxygen species entering the P450 mechanism via the peroxide shunt pathway. The other two approaches are sustained by electron injections into catalytically competent heme domains either facilitated by redox partners or through direct heme domain reduction. Achievements as well as pitfalls of each approach are briefly summarized. This article is part of a Special Issue entitled: Cytochrome P450 biodiversity and biotechnology, edited by Erika Plettner, Gianfranco Gilardi, Luet Wong, Vlada Urlacher, Jared Goldstone.