Microbial synthesis of antimony sulfide to prepare catechol and hydroquinone electrochemical sensor by pyrolysis and carbonization.

The application of antimony sulfide sensors, characterized by their exceptional stability and selectivity, is of emerging interest in detection research, and the integration of graphitized carbon materials is expected to further enhance their electrochemical performance. This study represents a pioneering effort in the synthesis of carbon-doped antimony sulfide materials through the pyrolysis of the mixture of microorganisms and their synthetic antimony sulfide. The prepared materials are subsequently applied to electrochemical sensors for monitoring the highly toxic compounds catechol (CC) and hydroquinone (HQ) in the environment. Via cyclic voltammetry (CV) and impedance testing, we concluded that the pyrolytic product at 700 °C (Sb-700) demonstrated the best electrochemical properties. Differential pulse voltammetry (DPV) revealed impressive separation when utilizing Sb-700/GCE for simultaneous detection of CC and HQ, exhibiting good linearity within the concentration range of 0.1-140 µM. The achieved sensitivities of 24.62 µA µM-1 cm-2 and 22.10 µA µM-1 cm-2 surpassed those of most CC and HQ electrochemical sensors. Meanwhile, the detection limits for CC and HQ were as low as 0.18 µM and 0.16 µM (S/N = 3), respectively. Additional tests confirmed the good selectivity, reproducibility, and long-term stability of Sb-700/GCE, which was effective in detecting CC and HQ in tap water and river water, with recovery rates of 100.7%-104.5% and 96.5%-101.4%, respectively. It provides a method that combines green microbial synthesis and simple pyrolysis for the preparation of electrode materials in CC and HQ electrochemical sensors, and also offers a new perspective for the application of microbial synthesized materials.

Roles of Natural Phenolic Compounds in Polycyclic Aromatic Hydrocarbons Abiotic Attenuation at Soil-Air Interfaces through Oxidative Coupling Reactions.

Little information is available on the roles of natural phenolic compounds in polycyclic aromatic hydrocarbons (PAHs) attenuation at dry soil-air interfaces. The purpose of this study was to determine the roles of model phenolic constituents of soil organic matter (SOM) on the abiotic attenuation of PAHs. The phenolic compounds can significantly change the attenuation rates of PAHs, among which hydroquinone was the most effective in promoting anthracene and benzo[a]anthracene attenuation. Product identification and sequential extraction experiments revealed hydroquinone enhanced the formation of oxidative coupling products and promoted the incorporation of PAHs into humic analogues, thereby reducing potential risks to humans and ecosystems. Electron paramagnetic resonance spectroscopy analyses showed both PAHs and phenolic compounds could donate electrons to Lewis acid sites of soil minerals, resulting in the generation of persistent free radicals (PFRs). PFRs could promote the generation of ·OH to enhance PAH oxidation and could cross-couple with PAHs, resulting in high-molecular-weight oxidative coupling products. This study revealed for the first time the reaction mechanism between PAHs and phenolic components of SOM under relatively dry conditions and provided new insights into promoting PAHs detoxification in soils but also a potential strategy to increase the organic carbon sequestration.

Bifunctional nanozyme of copper organophyllosilicate for the ultrasensitive detection of hydroquinone.

The rapid development of nanozymes for ultrasensitive detection of contaminate has resulted in considerable attention. Herein, a carboxyl- and aminopropyl-functionalized copper organophyllosilicate (Cu-CAP) was synthesized by a facile, one-pot sol-gel method. The bifunctional groups endow it with superior catalytic activity than that of natural enzyme. Besides, it possesses outstanding catalytic stability under harsh conditions such as high temperature, extremely high or low pH, and high salinity. Apart from laccase-mimetic activity, Cu-CAP also shows oxidation of the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB) to the blue-colored TMBox in the presence of H2O2, which is similar to natural horseradish peroxidase (HRP). Interestingly, this colorimetric system was suppressed by hydroquinone (HQ) specifically. Inspired by this, Cu-CAP was used to develop a highly sensitive and selective colorimetric method for the determination of HQ. This assay displayed an extremely low detection limit of 23 nM and was applied for the detection of HQ in environmental water with high accuracy. This approach offers a new route for the rational design of high performance nanozymes for environmental and biosensing applications.

Fe3O4-CuO@Lignite activated coke activated persulfate advanced treatment of phenolic wastewater from coal chemical industry.

In this study, lignite activated coke (LAC) was used as the carrier for the first time, Fe3O4-CuO composite metal oxide was used as the main active material, and the nano-scale magnetic supported composite metal oxide Fe3O4-CuO@LAC catalyst was synthesized for the first time, which can effectively activate the active oxygen in peroxodisulfate (PS). XRD, FTIR, BET, SEM, XPS and other analysis results showed that there was particulate matter with spherical structure on the surface of the active coke, and its diffraction peaks matched well with the characteristic peaks of Fe3O4 and CuO, and it was a mesoporous structure with a specific surface area of 619.090 m2 g-1. By optimizing the experimental conditions, the results showed that more than 92% of hydroquinone can be removed under the conditions of hydroquinone concentration of 50 mg/L, pH = 5, adding 0.1 g/L catalyst and 3 mmol/L PS. EPR and quenching experiments proved that there were four reactive oxygen species in the reaction system ·OH, SO4-·, O2-· and 1O2. According to the degradation products of hydroquinone detected by LC-MS, the possible degradation path was deduced which laid a foundation for solving the problem of difficult treatment of phenol-containing wastewater in coal chemical industry.

Proteomic analysis of Burkholderia zhejiangensis CEIB S4-3 during the methyl parathion degradation process.

Methyl parathion is an organophosphorus pesticide widely employed worldwide to control pests in agricultural and domestic environments. However, due to its intensive use, high toxicity, and environmental persistence, methyl parathion is recognized as an important ecosystem and human health threat, causing severe environmental pollution events and numerous human poisoning and deaths each year. Therefore, identifying and characterizing microorganisms capable of fully degrading methyl parathion and its degradation metabolites is a crucial environmental task for the bioremediation of pesticide-polluted sites. Burkholderia zhejiangensis CEIB S4-3 is a bacterial strain isolated from agricultural soils capable of immediately hydrolyzing methyl parathion at a concentration of 50 mg/L and degrading the 100% of the released p-nitrophenol in a 12-hour lapse when cultured in minimal salt medium. In this study, a comparative proteomic analysis was conducted in the presence and absence of methyl parathion to evaluate the biological mechanisms implicated in the methyl parathion biodegradation and resistance by the strain B. zhejiangensis CEIB S4-3. In each treatment, the changes in the protein expression patterns were evaluated at three sampling times, zero, three, and nine hours through the use of two-dimensional polyacrylamide gel electrophoresis (2D-PAGE), and the differentially expressed proteins were identified by mass spectrometry (MALDI-TOF). The proteomic analysis allowed the identification of 72 proteins with differential expression, 35 proteins in the absence of the pesticide, and 37 proteins in the experimental condition in the presence of methyl parathion. The identified proteins are involved in different metabolic processes such as the carbohydrate and amino acids metabolism, carbon metabolism and energy production, fatty acids ß-oxidation, and the aromatic compounds catabolism, including enzymes of the both p-nitrophenol degradation pathways (Hydroquinone dioxygenase and Hydroxyquinol 1,2 dioxygenase), as well as the overexpression of proteins implicated in cellular damage defense mechanisms such as the response and protection of the oxidative stress, reactive oxygen species defense, detoxification of xenobiotics, and DNA repair processes. According to these data, B. zhejiangensis CEIB S4-3 overexpress different proteins related to aromatic compounds catabolism and with the p-nitrophenol  degradation pathways, the higher expression levels observed in the two subunits of the enzyme Hydroquinone dioxygenase, suggest a preferential use of the Hydroquinone metabolic pathway in the p-nitrophenol degradation process. Moreover the overexpression of several proteins implicated in the oxidative stress response, xenobiotics detoxification, and DNA damage repair reveals the mechanisms employed by B. zhejiangensis CEIB S4-3 to counteract the adverse effects caused by the methyl parathion and p-nitrophenol exposure.

New carbon black-based conductive filaments for the additive manufacture of improved electrochemical sensors by fused deposition modeling.

The development of a homemade carbon black composite filament with polylactic acid (CB-PLA) is reported. Optimized filaments containing 28.5% wt. of carbon black were obtained and employed in the 3D printing of improved electrochemical sensors by fused deposition modeling (FDM) technique. The fabricated filaments were used to construct a simple electrochemical system, which was explored for detecting catechol and hydroquinone in water samples and detecting hydrogen peroxide in milk. The determination of catechol and hydroquinone was successfully performed by differential pulse voltammetry, presenting LOD values of 0.02 and 0.22 µmol L-1, respectively, and recovery values ranging from 91.1 to 112% in tap water. Furthermore, the modification of CB-PLA electrodes with Prussian blue allowed the non-enzymatic amperometric detection of hydrogen peroxide at 0.0 V (vs. carbon black reference electrode) in milk samples, with a linear range between 5.0 and 350.0 mol L-1 and low limit of detection (1.03 µmol L-1). Thus, CB-PLA can be successfully applied as additively manufactured electrochemical sensors, and the easy filament manufacturing process allows for its exploration in a diversity of applications.

A Deep Learning Approach to Organic Pollutants Classification Using Voltammetry.

This paper proposes a deep leaning technique for accurate detection and reliable classification of organic pollutants in water. The pollutants are detected by means of cyclic voltammetry characterizations made by using low-cost disposable screen-printed electrodes. The paper demonstrates the possibility of strongly improving the detection of such platforms by modifying them with nanomaterials. The classification is addressed by using a deep learning approach with convolutional neural networks. To this end, the results of the voltammetry analysis are transformed into equivalent RGB images by means of Gramian angular field transformations. The proposed technique is applied to the detection and classification of hydroquinone and benzoquinone, which are particularly challenging since these two pollutants have a similar electroactivity and thus the voltammetry curves exhibit overlapping peaks. The modification of electrodes by carbon nanotubes improves the sensitivity of a factor of about ×25, whereas the convolution neural network after Gramian transformation correctly classifies 100% of the experiments.

Comprehensive profiling of semi-polar phytochemicals in whole wheat grains (Triticum aestivum) using liquid chromatography coupled with electrospray ionization quadrupole time-of-flight mass spectrometry.

INTRODUCTION: Wheat (Triticum aestivum) it is one of the most important staple food crops worldwide and represents an important resource for human nutrition. Besides starch, proteins and micronutrients wheat grains accumulate a highly diverse set of phytochemicals. OBJECTIVES: This work aimed at the development and validation of an analytical workflow for comprehensive profiling of semi-polar phytochemicals in whole wheat grains. METHOD: Reversed-phase ultra-high performance liquid chromatography coupled with electrospray ionization quadrupole time-of-flight mass spectrometry (UHPLC/ESI-QTOFMS) was used as analytical platform. For annotation of metabolites accurate mass collision-induced dissociation mass spectra were acquired and interpreted in conjunction with literature data, database queries and analyses of reference compounds. RESULTS: Based on reversed-phase UHPLC/ESI-QTOFMS an analytical workflow for comprehensive profiling of semi-polar phytochemicals in whole wheat grains was developed. For method development the extraction procedure and the chromatographic separation were optimized. Using whole grains of eight wheat cultivars a total of 248 metabolites were annotated and characterized by chromatographic and tandem mass spectral data. Annotated metabolites comprise hydroquinones, hydroxycinnamic acid amides, flavonoids, benzoxazinoids, lignans and other phenolics as well as numerous primary metabolites such as nucleosides, amino acids and derivatives, organic acids, saccharides and B vitamin derivatives. For method validation, recovery rates and matrix effects were determined for ten exogenous model compounds. Repeatability and linearity were assessed for 39 representative endogenous metabolites. In addition, the accuracy of relative quantification was evaluated for six exogenous model compounds. CONCLUSIONS: In conjunction with non-targeted and targeted data analysis strategies the developed analytical workflow was successfully applied to discern differences in the profiles of semi-polar phytochemicals accumulating in whole grains of eight wheat cultivars.

Nanocomposites based on quasi-networked Au1.5Pt1Co1 ternary alloy nanoparticles and decorated with poly-L-cysteine film for the electrocatalytic application of hydroquinone sensing.

A mildly one-pot method is developed for the synthesis of quasi-networked Au1.5Pt1Co1 ternary alloy nanoparticles (TANPs) at room temperature through the co-reduction of AuCl4-, PtCl6- and Co2+ with hydrazine hydrate. Characterizations of XRD, XPS, HRTEM, EDS and SAED successfully reveal the crystal structure, composition, valence and morphology of Au1.5Pt1Co1 TANPs, respectively. The glassy carbon electrode (GCE) modified by Au1.5Pt1Co1 TANPs with good dispersion and multi-density surface defects occupies the optimal electrochemical active surface area (ECSA). After the coated poly-L-cysteine (P-L-Cys) film on the Au1.5Pt1Co1/GCE surface, the morphology, element mapping and surface roughness of the P-L-Cys/Au1.5Pt1Co1/GCE are investigated via FESEM and AFM to verify continuous electrode modification processes. The electrochemical behaviors of the composite electrode for hydroquinone (HQ) are evaluated by cyclic voltammetry (CV) with interfacial properties of adsorption and diffusion. Differential pulse voltammetry (DPV) for HQ electrochemical sensing at 0.10 V (vs. SCE) exhibits two linear response ranges from 0.1 to 30 and 30-200 µM, respectively. A low detection limit (S/N = 3) of 0.045 µM is obtained with a sensitivity of 4.247 µA µM-1·cm-2. The resulting P-L-Cys/Au1.5Pt1Co1/GCE also presents ascendant selectivity, repeatability, reproducibility and stability. In addition, the established method is applied to the assessment of the HQ level in real water samples (mineral water, tap water and lake water) with the satisfactory results of spiked recoveries. The sensor may become a promising tool for the trace analysis of the electroactive substance in food or environmental samples.

A multifunctional nanozyme-based enhanced system for tert-butyl hydroquinone assay by surface-enhanced Raman scattering.

An Au-based nanozyme composite (AuNPs/Cu,I) was constructed by using Cu,I-doped carbon dots (Cu,I-CDs) as the reducing agent as well as the nanozyme. Notably, AuNPs/Cu,I nanozyme not only possessed the intrinsic activity of mimicking enzymes of superoxide dismutase, peroxidase, and catalase at different conditions but was also employed as surface-enhanced Raman spectroscopy (SERS) enhancer. The combination of Cu,I-CDs and AuNPs promoted the electron transferability, leading to increased peroxidase-like activity and superoxide-like activity. Compared to the individual Cu,I-CDs and AuNPs nanozyme, the AuNPs/Cu,I composite demonstrated promising peroxidase-like activity by transferring electrons instead of generating OH. Interestingly, the multienzyme-like activity of AuNPs/Cu,I nanozyme could be finely tuned by changing the composition of Cu0/Cu+ and Au. The tert-butyl hydroquinone (TBHQ) as the substrate could be catalyzed with AuNPs/Cu,I nanozyme to produce red substances, resulting in a significant Raman enhancement effect at the same time, showing good linear range from 0.11 to 10 mg L-1. Overall, the current investigation provides a flexible and controllable way to design multifunctional nanozymes along with the Raman enhancement strategy based on the catalysis of nanozyme.

[Rapid Determination of tert-Butylhydroquinone (TBHQ) in Foods Using Three-Layer Extraction].

A rapid, easy and versatile analytical method based on three-layer extraction was developed for the determination of tert-butylhydroquinone (TBHQ) in foods. In this method, degreasing with n-hexane, partitioning into acetonitrile, and purification by the salting-out were simultaneously performed after extraction with acetone. It allowed to prepare a test solution without concentrating, transferring, and purification using solid phase extraction column. As a result, TBHQ for a wide variety of 11 foods met the management criteria of the guideline for validity assessment (Ministry of Health, Labour and Welfare of Japan). Thus, the present method could be useful for a rapid determination of TBHQ in foods.

Amperometric Flow-Injection Analysis of Phenols Induced by Reactive Oxygen Species Generated under Daylight Irradiation of Titania Impregnated with Horseradish Peroxidase.

Titanium dioxide (TiO2) is a unique material for biosensing applications due to its capability of hosting enzymes. For the first time, we show that TiO2 can accumulate reactive oxygen species (ROS) under daylight irradiation and can support the catalytic cycle of horseradish peroxidase (HRP) without the need of H2O2 to be present in the solution. Phenolic compounds, such as hydroquinone (HQ) and 4-aminophenol (4-AP), were detected amperometrically in flow-injection analysis (FIA) mode via the use of an electrode modified with TiO2 impregnated with HRP. In contrast to the conventional detection scheme, no H2O2 was added to the analyte solution. Basically, the inherited ability of TiO2 to generate reactive oxygen species is used as a strategy to avoid adding H2O2 in the solution during the detection of phenolic compounds. Electron paramagnetic resonance (EPR) spectroscopy indicates the presence of ROS on titania which, in interaction with HRP, initiate the electrocatalysis toward phenolic compounds. The amperometric response to 4-AP was linear in the concentration range between 0.05 and 2 µM. The sensitivity was 0.51 A M-1 cm-2, and the limit of detection (LOD) 26 nM. The proposed sensor design opens new opportunities for the detection of phenolic traces by HRP-based electrochemical biosensors, yet in a more straightforward and sensitive way following green chemistry principles of avoiding the use of reactive and harmful chemical, such as H2O2.

Detection of hydroquinone by Raman spectroscopy in patients with melasma before and after treatment.

BACKGROUND: Melasma is an acquired, facial hyperpigmentation without a specific origin. It is regularly associated with multiple etiologic factors such as pregnancy, genetic, racial, and from estrogen administration. Among the methods to treat skin hyperpigmentation a series of skin bleaching agents have been used. At present, the most commonly used agent is known as hydroquinone. Nowadays, it is known that hydroquinone can cause cancer in animals with unknown relevance to humans. MATERIAL AND METHODS: In this work, Raman spectroscopy was used to observe the presence of hydroquinone in the skin of 18 patients who have been under treatment for melasma. RESULTS: A significant increase in the Raman signal was observed in the six bands associated with hydroquinone after melasma treatment. CONCLUSION: The authors believe that monitoring the presence of hydroquinone may be useful for an optimal personalized treatment of melasma and to provide the specialist a support tool to control the administration of this type of bleaching agents.

Skin lightening products' violations in Europe: An analysis of the rapid alert system for dangerous non-food products 2005-2018.

BACKGROUND: Skin lightening products containing dangerous levels of chemicals pose a serious health concern for consumers. However, to date, the extent of these products in Europe has not been extensively studied. The aim of this study was to determine whether harmful skin lightening products are available for sale in Europe and what violations exist regarding their composition. MATERIALS AND METHODS: We queried the Rapex database, which is the Rapid Alert System for dangerous non-food products among 31 European countries, to identify skin lightening cosmetics reported between 2005 and 2018, and presented a detailed summary of these notifications. RESULTS: In the years 2005-2018, of all violations regarding cosmetics, 26.3% concerned skin lightening products. In the database, 266 reports on skin lightening products were identified. Most of the notifications came from Germany (17.29%), France (17.29%), Portugal (15.41%), and the United Kingdom (11.65%). The majority of the registered products originated from non-European countries, mainly the Côte d'Ivoire (29.70%). The major reason for the violation was the content of hydroquinone, mercury, or clobetasol propionate. CONCLUSIONS: Hazardous skin lightening products that are not in line with European cosmetics legislation are available on the European market. Most of the products are imported. The main risk associated with these products is the content of hydroquinone, mercury, and clobetasol propionate. It is important to bear in mind that this study focuses on the Rapex system and other sources of information may exist. Based on our findings, a more comprehensive evaluation by international authorities is justified.

Bifunctional bimetallic heterojunction material based on Al2O3/ZnO micro flowers for electrochemical sensing and catalysis.

We report the synthesis, characterization, electrochemical sensing and catalytic capability of the bimetallic heterojunction Al2O3/ZnO micro flowers (AZ MFs). In order to prepare this bifunctional material, the facile hydrothermal process was adopted. The material was thoroughly characterized for the crystal structure and morphology with Powder XRD, XPS and FE-SEM. The investigation of electrochemical sensing was done using hydroquinone (HQ) and the chemical catalysis was using rhodamine B (RhB) with our bimetallic Al2O3/ZnO micro flowers as these are harmful industrial pollutants. The process parameters like the influence of scan rate and pH was efficiently optimized for the electrochemical detection of HQ and kinetics for the time dependent catalytic degradation of RhB dye. The linear relationship between the peak current and the concentration of HQ was found to be in the range of 0.125-20.25 µM with an impressive detection limit of 11.2 nM. In the chemical catalytic degradation of the RhB dye, our bimetallic material thrived well during the reaction and degraded the material in 10 min. The performance of bimetallic Al2O3/ZnO micro flowers towards HQ detection and RhB degradation shows good stability, reproducibility and it can be efficiently utilized to treat the environmental pollutants.

Simultaneous removal of dihydroxybenzenes and toxicity reduction by Penicillium chrysogenum var. halophenolicum under saline conditions.

The dihydroxybenzenes are widely found in wastewater and usually more than one of these aromatic compounds co-exist as pollutants of water resources. The current study investigated and compared the removal efficiency of hydroquinone, catechol and resorcinol in binary substrate systems under saline conditions by Penicillium chrysogenum var. halophenolicum, to clarify the potential of this fungal strain to degrade these aromatic compounds. Since P. chrysogenum is a known penicillin producer, biosynthetic penicillin genes were examined and antibiotic was quantified in mono and binary dihydroxybenzene systems to elucidate the carbon flux of dihydroxybenzenes metabolism in the P. chrysogenum var. halophenolicum to the secondary metabolism. In binary substrate systems, the three assayed dihydroxybenzene compounds were found to be co-metabolized by fungal strain. The fungal strain preferentially degraded hydroquinone and catechol. Resorcinol was degraded slower and supports higher antibiotic titers than either catechol or hydroquinone. Dihydroxybenzenes were faster removed in mixtures compared to mono substrate systems, except for the case of hydroquinone. In this context, the expression of penicillin biosynthetic gene cluster was not related to the removal of dihydroxybenzenes. Penicillin production was triggered simultaneously or after dihydroxybenzene degradation, but penicillin yields, under these conditions, did not compromise dihydroxybenzene biological treatment. To investigate the decrease in dihydroxybenzenes toxicity due to the fungal activity, viability tests with human colon cancer cells (HCT116) and DNA damage by alkaline comet assays were performed. For all the conditions assays, a decrease in saline medium toxicity was observed, indicating its potential as detoxification agent.

Synergic effect of silver nanoparticles and carbon nanotubes on the simultaneous voltammetric determination of hydroquinone, catechol, bisphenol A and phenol.

A glassy carbon electrode (GCE) was modified with multi-walled carbon nanotubes (MWCNT) and silver nanoparticles (AgNPs) and applied to the simultaneous determination of hydroquinone (HQ), catechol (CC), bisphenol A (BPA) and phenol by using square-wave voltammetry. The MWCNTs were deposited on the GCE and the AgNPs were then electrodeposited onto the MWCNT/GCE by the application of 10 potential sweep cycles using an AgNP colloidal suspension. The modified GCE was characterized by using SEM, which confirmed the presence of the AgNPs. The electrochemical behavior of the material was evaluated by using cyclic voltammetry, and by electrochemical impedance spectroscopy that employed hexacyanoferrate as an electrochemical probe. The results were compared to the performance of the unmodified GCE. The modified electrode has a lower charge-transfer resistance and yields an increased signal. The peaks for HQ (0.30 V), CC (0.40 V), BPA (0.74 V) and phenol (0.83 V; all versus Ag/AgCl) are well separated under optimized conditions, which facilitates their simultaneous determination. The oxidation current increases linearly with the concentrations of HQ, CC, BPA and phenol. Detection limits are in the order of 1 µM for all 4 species, and the sensor is highly stable and reproducible. The electrode was successfully employed with the simultaneous determination of HQ, CC, BPA and phenol in spiked tap water samples. Graphical abstract A glassy carbon electrode was modified with carbon nanotubes and silver nanoparticles and then successfully applied to the simultaneous determination of four phenolic compounds. The sensor showed high sensitivity in the detection of hydroquinone, catechol, bisphenol A and phenol in water samples.

An electrochemically aminated glassy carbon electrode for simultaneous determination of hydroquinone and catechol.

In this contribution, a very simple and reliable strategy based on the easy modification of a glassy carbon electrode (GCE) by pre-electrolyzing GCE in ammonium carbamate aqueous solution was employed for the simultaneous determination of hydroquinone (HQ) and catechol (CC). Compared with bare GCE, the incorporation of nitrogen into the GCE surface structure improved the electrocatalytic properties of GCE towards the electro-oxidation of HQ and CC. The nitrogen-introduced GCE (N-GCE) was evaluated for the simultaneous detection of HQ and CC and the linear ranges for HQ and CC were both from 5 to 260 µM. Their detection limits were both evaluated to be 0.2 µM (S/N = 3). The present method was applied for the determination of HQ and CC in real river water samples with recoveries of 95.0-102.1%. In addition, a possible detection mechanism of HQ and CC was discussed.

Mercury, hydroquinone and clobetasol propionate in skin lightening products in West Africa and Canada.

Skin lightening products are types of cosmetics (creams, gels, lotions and soaps) applied voluntarily on skin. Several of these products contain a variety of active ingredients that are highly toxic. Among those toxic agents, the present study focuses on mercury, hydroquinone, and clobetasol propionate. Out of the 93 lightening soaps and 98 creams purchased in large city markets in sub-Saharan West Africa and in small ethnic shops in Canada, 68-84% of all creams and 7.5-65% of all soaps exceeded regulatory guidelines for at least one active ingredient when considering different regulations. Mercury was found in high concentrations mainly in soaps, while hydroquinone and clobetasol propionate concentrations exceeded US FDA standards in some creams for all countries included in our study. Concentrations of the three compounds declared on labels of soaps and creams usually did not correspond to concentrations actually measured, particularly for mercury and hydroquinone. Overall, our results indicate that most studied skin-lightening products are potentially toxic and that product labels are frequently inaccurate with respect to the presence of toxic agents.

Combinations of potent topical steroids, mercury and hydroquinone are common in internationally manufactured skin-lightening products: a spectroscopic study.

BACKGROUND: The topical steroids betamethasone (BM) and clobetasol propionate (CP) are illegal in cosmetics. Hydroquinone (HQ) and mercury (Hg) are either illegal or allowed only in limited concentrations (2% and 1 ppm, respectively). AIM: To investigate active ingredients and countries of origin of popular skin-lightening products available in Cape Town, South Africa. METHODS: In total, 29 products were examined; of these, 22 products were purchased from informal vendors, and 2 products (out of a total of 29) were purchased over the counter. HQ, Hg(2+) and steroids were quantified by high-performance liquid chromatography-ultraviolet spectrophotometry, inductively coupled plasma-mass spectrometry and liquid chromatography-mass spectrometry, respectively. RESULTS: Of the 29 products, 22 (75.9%), all imported and bought from informal vendors, contained illegal or banned ingredients: 13 (44.8%) contained steroids (9 CP, 4 BM), 12 (41.4%) contained Hg (30-2300 ppm), and 11 (37.9%) contained HQ. Sequentially, the products originated from Italy (27.3%, n = 6), India (22.7%, n = 5), the Democratic Republic of Congo (DRC) (22.7%, n = 5), Cote d'Ivoire (9.1%, n = 2), USA (9.1%, n = 2), UK (4.5%, n = 1) and France (4.5%, n = 1). Two products, one from India and one from the DRC, contained all four ingredients (HQ, Hg, BM, CP). Of the 12 products containing Hg, 10 also contained HQ and/or a steroid, yet none listed Hg as an ingredient. A significant proportion of the steroid-containing products (76.9%) also contained at least one other skin-lightening agent. Not all internationally available products were tested, which is a limitation of the study. CONCLUSION: In spite of a European Union ban on skin lighteners, a third of the products tested were from Europe. Combinations of Hg and ultrapotent steroids were prominent. International law enforcement and random testing is needed to encourage industry compliance and help protect consumers.