A systematic and comprehensive protocol for rapid orthodontic extrusion.

OBJECTIVE: The aim of the present paper is to describe a systematic and detailed protocol for rapid orthodontic extrusion, and to summarize the main results of this protocol in terms of migration of dental, hard and soft tissues, for 10 cases. CLINICAL CONSIDERATIONS: The working design was to apply a protocol lasting 4 weeks of active phase with intense forces (greater than 300 g), perform weekly the circumferential supra-crestal fiberotomy procedure associated with root-planning, follow up with a passive stabilization phase of another 4 weeks and evaluate the results. CONCLUSIONS: We believe that despite the partial migration of periodontal tissue, the defined protocol we used is, for simplicity of application, brevity of treatment and results, a viable alternative to the surgical technique of clinical crown lengthening in those cases where it is necessary to have more dental tissue exposed for restorative and prosthetic purposes.

Orthodontic tooth extrusion to regenerate missing papilla adjacent to maxillary anterior single implants: A 2- to 7-year retrospective study.

INTRODUCTION: Regeneration of the missing papilla adjacent to single implants in the esthetic zone has always been challenging, despite advances in vertical hard and soft tissue regeneration. Orthodontic tooth extrusion has been shown to effectively gain alveolar bone and gingival tissue. This retrospective study evaluated the effectiveness of orthodontic tooth extrusion on regenerating missing papilla between existing maxillary anterior single implant and its adjacent tooth. METHODS: Patients who underwent orthodontic tooth extrusion to regenerate missing papilla adjacent to a single implant in the esthetic zone were included in this study. The gingival phenotype, orthodontic extrusion movement, proximal bone level, dento-implant papilla level, facial gingival level, mucogingival junction level, and keratinized tissue width, of the extruded tooth were recorded at pre-orthodontic extrusion (T0 ), post-orthodontic extrusion and retention (T1 ), and latest follow-up (T2 ). RESULTS: A total of 17 maxillary single tooth had orthodontic tooth extrusion to regenerate missing papilla adjacent to 14 maxillary anterior single implants in 14 patients. After a mean follow-up time of 48.4 months, implant success rate was 100% (14/14), with none of the orthodontically extruded teeth being extracted. After a mean extrusion and retention period of 14.3 months, a mean orthodontic extrusion movement of 4.62 ± 0.78 mm was noted with a mean proximal bone level gain of 3.54 ± 0.61 mm (77.0% efficacy), dento-implant papilla level gain of 3.98 ± 0.81 mm (86.8% efficacy), and facial gingival tissue gain of 4.27 mm ± 0.55 mm (93.4% efficacy). A mean keratinized tissue width gain of 4.17 ± 0.49 mm with minimal mean mucogingival junction level change of 0.10 ± 0.30 mm were observed. The efficacy of orthodontic eruption movement on dento-implant papilla gain was less in the thin (80.5%) phenotype group when compared with that in the thick (91.5%) phenotype group. CONCLUSIONS: Within the confines of this study, orthodontic extrusion is an effective, noninvasive method in regenerating mid-term stable proximal bone and papilla adjacent to maxillary anterior single implants. CLINICAL SIGNIFICANCE: This retrospective study presents a mid-term result on orthodontic extrusion as a mean to regenerate dento-implant papilla defect. The extended retention period following orthodontic extrusion showed stable and efficacious proximal bone and papilla gain.

Effect of force direction and impaction angulation during dilaceration impacted central incisor traction: a finite element analysis.

BACKGROUND: The effects of traction forces at different angles on impacted central incisors(ICI)with varying inverted angles (IA) may be different. The objective of this study was to analyze the biomechanical effects of different force directions (FD) on developmentally inverted ICI with multi-angle variations and to offer insights and guidance for the treatment of inverted ICI. METHODS: Three-dimensional finite element method was employed to simulate clinical scenarios of inverted ICI traction. As such, 0.2 N of force (direction: antero-superior angles of 90°, 100°, 110°, 120°, and 130° relative to the long axis of the inverted ICI crown) was applied to the inverted ICI with inverse angles (IA) of 40°, 30°, 20°, 10° and 0°. Inverted ICI apical displacement and Von Mises stress on periodontal ligament (PDL) and alveolar bone were compared. RESULTS: IA and FD showed minimal influence on the stress distribution in the PDL, as higher stresses were concentrated in the apical region. The higher stresses in the alveolar bone are focused on the cervical and apical regions of the tooth. In particular, IA exerts a more significant impact on stress distribution in the alveolar bone than FD. The influence of IA on the apical displacement of inverted ICI is larger than that of FD. CONCLUSIONS: To promote the health of the root and periodontal tissues, it is recommended to use an angle of 100°-110° relative to the long axis of the ICI crown when dealing with a large IA (> 20°) developmentally inverted ICI. Conversely, an angle of 110°-120° can be used.

Treatment options for impacted maxillary canines and occurrence of ankylotic and resorptive processes: a 20-year retrospective study.

BACKGROUND: This 20-year retrospective study aimed to evaluate the treatment methods used in patients with impacted maxillary permanent canines and to determine the occurrence of ankylotic and resorptive processes and their association with potential risk factors. METHODS: The cohort consisted of 351 consecutive Caucasian patients (120 males and 231 females, mean age 18.4 and 19.9 years, respectively) with 420 impacted maxillary permanent canines. CT and CBCT findings were subsequently confirmed during surgery. Statistical analyses were performed by the generalized linear models, Pearson x2 and Fisher exact tests using the statistical programs R and Statistica v. 14. RESULTS: A total of 273 (65.0%) impacted canines were aligned in the dental arch by orthodontic traction after surgical exposure, this treatment was predominant in patients under 20 years of age. Surgical extraction was performed in 115 (27.2%) impacted canines and was more common in older patients. Ankylotic changes were recorded in 61 (14.5%) impacted canines. The probability of ankylosis increased with age, particularly after the patient's 20th year of life (p < 0.001). Patients were 1.2% likely to develop ankylosis at age 15 years, 4.3% at age 20 years, 14.1% at age 25 years, and 96.8% at age 45 years. Invasive cervical root resorption (ICRR) was found in 8 (1.9%) canines. In 4 canines (1.0%), root ankylosis in addition to ICRR was observed. In contrast to ankylosis, whose frequency of occurrence increased with age, the occurrence of ICRR resulting from PDL damage during surgery was more typical in younger patients. Canines in a high position above the root apices of the adjacent teeth, with a horizontal inclination of the longitudinal axis, with the crown located deep in the center of the alveolar bone and with labiopalatal position, should be considered critically impacted canines with a high risk to failure of orthodontic traction. CONCLUSION: In conclusion, the treatment of impacted canines depends mainly on the age of the patient, and the position and inclination of the longitudinal axis of the impacted tooth. To select an adequate treatment method, we recommend CBCT examination, which allows a precise analysis of the position of impacted canines.

Periodontal outcomes of surgically exposed and orthodontically aligned buccally impacted maxillary canines: A systematic review and meta-analysis.

OBJECTIVE: To compare the periodontal outcomes of surgically exposed and orthodontically aligned buccally impacted maxillary canines to spontaneously erupted maxillary canines. DATA SOURCES: An unrestricted search was carried out of indexed databases (Medline, EMBASE, Web of Science and Scopus), reference lists of included studies, and grey literature published until December 2023. DATA SELECTION: Observational and experimental studies that addressed the focused question 'Do periodontal outcomes of buccally impacted maxillary canines that were surgically exposed and subsequently extruded and aligned using orthodontic alignment, differ from those of spontaneously erupted maxillary canines?' were included. DATA EXTRACTION: Study screening, selection and data extraction were performed independently by two authors, with disagreement resolved by a third reviewer. The risk of bias was assessed using the JBI Critical Appraisal Checklist and GRADE approach. RESULTS: A total of 857 citations were found and five studies were eligible for inclusion. Supragingival plaque accumulation and gingival inflammation were similar between impacted canines and their contralaterals in most studies. Meta-analyses revealed no significant differences in keratinised tissue width (prospective studies: MD = -0.28, 95% confidence interval [CI] = -1.13-0.56, I² = 78%; retrospective studies: MD = 0.61, 95% CI = -1.51-2.72, I² = 94%). However, a meta-analysis of prospective studies showed slightly greater mean probing depth for impacted canines compared to their contralateral canines (prospective studies: MD = 0.16, 95% CI = 0.04-0.28, I² = 0%). The evidence certainty for keratinised tissue width and probing depth outcomes was low. CONCLUSION: Surgically exposed and orthodontically aligned buccally impacted canines have slightly greater probing depths, potential bone loss and increased clinical crown length, compared to their counterparts. However, these small differences (<1 mm) are unlikely to be clinically significant.

The Impact of Orthodontic Extrusion on Keratinized Gingiva.

Background and Objectives: The key factor that enables osteoblastic activity and the formation of new bone, as well as gingiva, during orthodontic tooth extrusion (OE) is the periodontal ligament. The reaction of periodontal tissues associated with changes in the gingiva is a part of orthodontic tooth displacement. The aim of this study was to examine the effect of OE on the width of the zone of the keratinized and attached gingiva, the position of the mucogingival junction, and the height of the interdental papillae in the region where the OE was performed as well as in the adjacent region. Materials and Methods: This research included 28 adult patients (both orthodontically treated and untreated). The treated group included 15 patients, in whom orthodontic extrusion of the upper or lower frontal teeth was indicated and performed. The untreated group included 13 patients, with no previous or undergoing orthodontic treatment. Patients with periodontal disease and periodontal pockets in the frontal region and patients allergic to iodine were excluded from the study. Gingivomorphometric measurements were performed on two occasions in three groups of teeth (24 extruded and 30 agonist teeth in the treated patients; 66 teeth in the untreated patients). Statistical analysis of the obtained data was performed using the software package SPSS version 26.0. Results: Orthodontic extrusion induced changes in the position of the mucogingival line and an increase in the width of the keratinized gingiva. There were no statistically significant effects on the depth of the gingival sulcus, the attached gingiva width, or the height of the interdental papillae. Conclusions: Orthodontic tooth extrusion has an effect on the periodontium in the observed region. Vertical orthodontic force, directed towards the coronal plane, affects the surrounding soft oral tissues.

Health economic evaluation of forced orthodontic extrusion of extensively damaged teeth: up to 6-year results from a clinical study.

OBJECTIVES: Clinical data on retaining extensively damaged teeth using forced orthodontic extrusion followed by restorative rehabilitation are scarce, and economic evaluations are basically absent. A health economic evaluation of this method was performed based on a clinical study. MATERIALS AND METHODS: In a convenience sample of individuals recruited from routine care, extensively damaged teeth were orthodontically extruded prior to restoration. Patients were followed up for up to 6 years. The health outcome was tooth retention time. Direct medical, non-medical, and indirect initial and follow-up costs were estimated using the private payer's perspective in German healthcare. Association of initial direct medical treatment costs and cofounding variables was analyzed using generalized linear models. Success and survival were secondary outcomes. RESULTS: A total of 35 teeth in 30 patients were followed over a mean ± SD of 49 ± 19 months. Five patients (14%) dropped out during that period. Median initial costs were 1941€ (range: 1284-4392€), median costs for follow-up appointments were 215€ (range: 0-5812€), and median total costs were 2284€ (range: 1453 to 7109€). Endodontic re-treatment and placement of a post had a significant impact on total costs. Three teeth had to be extracted and in three patients orthodontic relapse was observed. The survival and success rates were 91% and 83%, respectively. CONCLUSIONS: Within the limitations of this clinical study, total treatment costs for orthodontic extrusion and subsequent restoration of extensively damaged teeth were considerable. Costs were by large generated initially; endodontic and post-endodontic therapies were main drivers. Costs for retreatments due to complications were limited, as only few complications arose. CLINICAL RELEVANCE: The restoration of extensively damaged teeth after forced orthodontic extrusion comes with considerable initial treatment costs, but low follow-up costs. Overall and over the observational period and within German healthcare, costs are below those for tooth replacement using implant-supported crowns. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: DRK S00026697).

Forced orthodontic extrusion to restore extensively damaged anterior and premolar teeth as abutments for single-crown restorations: Up to 5-year results from a pilot clinical study.

STATEMENT OF PROBLEM: Clinical data on orthodontic extrusion to restore teeth deemed unrestorable because of their defect size are scarce. It remains unclear for which defects forced orthodontic extrusion and tooth retention is preferred to extraction. PURPOSE: The purpose of this pilot clinical study was to investigate the survival, frequency, and type of complications of extensively damaged teeth requiring single-crown restorations after forced orthodontic extrusion. MATERIAL AND METHODS: Participants were recruited from consecutive patients in need of restorative treatment of extensively damaged teeth at a university clinic. The teeth were orthodontically extruded to reestablish the biologic width and to ensure a 2-mm ferrule preparation before restoration. The primary endpoint was restoration success and survival. At recall, survival was defined as the tooth being in situ and success as a symptom-free tooth with an intact, caries-free restoration and with physiological pocket probing depths, no signs of intrusion, ankylosis, root resorption, or periapical radiolucency. Recalls were performed every 6 months; the outcome was assessed by radiographic and clinical evaluation after up to 5 years of clinical service. Quantitative parameters were described with mean values and standard deviations. RESULTS: Thirty-four participants were assessed for eligibility and enrolled (mean ±standard deviation age: 53.4 ±18.9 years). Four participants were premature dropouts. Data were analyzed for 35 teeth in 30 participants. The amount of extrusion varied between 2 and 6 mm (mean ±standard deviation 3.4 ±0.9 mm). The mean duration of extrusion was 18.9 ±12.6 days and the mean duration of retention was 126.94 ±88.1 days. The mean ±standard deviation crown-to-root ratio after treatment was 0.8 ±0.1 (range: 0.5 to 1.0). Three participants exhibited orthodontic relapse before restoration. Teeth were successfully restored after repeated extrusion. After a mean observation period of 3.3 years (range: 1 to 5.2 years), 29 of 31 teeth were still in situ. Two teeth were fractured, and 4 participants were not available for recall. Thus, the survival rate was 94%. No resorption or periapical translucencies were observed radiographically. Clinical examinations revealed physiological probing depths and absence of ankyloses. One tooth presented with marginal bone loss. The most frequent type of complication was orthodontic relapse at recall (n=3). A total of 84% of teeth were considered a success. CONCLUSIONS: Forced orthodontic extrusion allowed for the restoration of anterior and premolar teeth deemed as nonrestorable because of their defect size. Tooth retention of extensively damaged teeth and their use as abutments for single-crown restorations can be recommended.

Orthodontic management of a horizontally impacted maxillary incisor in an adolescent patient.

Horizontal maxillary incisor impaction is not common, but it affects facial esthetics, phonetics, and the patient's self-esteem. Therefore, it is necessary to manage this problem as early as possible. This case report presents a patient with an unerupted maxillary left central incisor combined with anterior and left posterior crossbite, edge-to-edge overbite on the right and left anterior open bite, low smile line, and mild skeletal Class III discrepancy. The treatment consisted of 3 stages: (1) maxillary expansion and sufficient space creation for the impacted tooth; (2) surgical exposure by closed-eruption technique; and (3) induced eruption of impaction. The treatment outcome was highly favorable. Maxillary impaction erupted in the proper position with a normal clinical crown height and consonant gingival line with the adjacent teeth. Maxillary and mandibular teeth had normal and stable occlusion. The 3-year follow-up demonstrated an esthetically functional outcome after orthodontically induced tooth eruption. This treatment required a good treatment plan by the orthodontist to obtain satisfactory results.

Orthodontic management of a patient with short root anomaly and impacted teeth.

Short root anomaly (SRA) is a rare familial dental condition that is often misdiagnosed. Orthodontic treatment of patients with SRA is challenging because it is difficult to diagnose, it may be accompanied by other dental anomalies, and it has been reported to contribute to additional susceptibility to root resorption during orthodontic treatment. In this article, we describe a methodical and evidence-based means of diagnosing and orthodontically managing a patient with SRA. The patient had additional challenges, including impacted and ectopic teeth. An individualized treatment plan that incorporated efficient and effective mechanics led to a well seated occlusion and an esthetic smile.

Can forces be applied directly to the root for correction of a palatally displaced central incisor with a dilacerated root?

This case report describes the interdisciplinary treatment of an ectopic horizontally placed maxillary right central incisor with severe root dilaceration. The root was distally angulated and entrapped by the root of the maxillary right lateral incisor. The initial force system was aimed at an occlusal displacement and applied to the crown. During the second phase, a button was cemented onto the apex of the impacted tooth. A force from the apex to a temporary anchorage device in the palate moved the root toward the midline. Finally, a root canal and an apectomy were performed and the central incisor could be moved to its ideal position. The treatment generated a normal height of the alveolar bone and an ideal occlusion with a healthy periodontium.

Surgical extrusion with an atraumatic extraction system: A clinical study.

STATEMENT OF PROBLEM: Clinical studies evaluating the feasibility of a novel technique for the surgical extrusion of nonrestorable teeth with subgingival caries are lacking. PURPOSE: The purpose of this clinical study was to investigate the success rate and incidence of biological and technical complications after tooth extrusion with an atraumatic extraction system (AES). MATERIAL AND METHODS: Participants were recruited from 61 consecutive patients initially referred to a specialist oral surgery practice. Fifty-one participants who underwent surgical extrusion with an AES followed by endodontic treatment and coronal restoration could be re-evaluated clinically and radiographically. RESULTS: The mean observation period was 3.1 years (range: 0.8 to 6.5 years). The participants varied in age between 24.8 and 86.3 years. The amount of extrusion was between 2.5 and 5.0 mm (mean 3.2 mm). At recall, 92.2% (47 of 51) of the extruded teeth were considered successful. All extruded teeth were asymptomatic, without clinical signs of inflammation. Percussion appeared normal and did not differ from that of the adjacent teeth, indicating absence of ankylosis. Transient resorption with a slightly altered root contour was detected in 5 of the 51 teeth. Minor reduction of the bone level (less than 10%) was detected in 8 of the 51. In a further 2 teeth, bone loss amounted to 25% and 30%. Periapical periodontitis at recall was seen in 4 of the 51 teeth, and a preexisting periapical lesion healed in 10 of 13. Root perforation was identified in 3 of the 51, and a further 3 of 11 were not available for recall. Thus, the technical complication rate was 9.7% (6 of 62). CONCLUSIONS: The AES may be successfully used for surgical extrusion to save apparently nonrestorable teeth, irrespective of patient age.

Periodontal status of anterior teeth following clinical crown lengthening by minimally traumatic controlled surgical extrusion.

BACKGROUND/AIMS: The number of fractured anterior teeth following trauma has been increasing while not every patient is able to afford a dental implant instead of maintaining the injured tooth. Thus, a tooth conservation solution is required to place an aesthetic and functional restoration without biologic width violation. The aim of this study was to evaluate the effectiveness of minimally traumatic controlled surgical extrusion in fractured anterior teeth crown lengthening by assessing the periodontal status through clinical examination and radiographs. METHODS: This longitudinal observational study investigated a group of 18 patients (six males and 12 females) at the Department of Periodontology, National Hospital of Odonto-stomatology, Ho Chi Minh City, Vietnam. Following pre-surgery procedures and examination, minimally traumatic controlled surgical extrusion was carried out using a periotome. Patients were examined at four follow-up appointments after 1 week, 1, 3 and 6 months to record the following experimental variables: periodontal parameters including the gingival index (GI), pocket depth (PD), bleeding on probing (BOP), mobility, marginal gingiva position, alveolar ridge resorption, periapical osteogenesis, tooth resorption and ankylosis. RESULTS: All periodontal parameters were significantly decreased at 3 and 6 months post-procedure (P < 0.001). Tooth mobility decreased gradually following surgery, and at 6 months, all teeth became normal at level 0. Periapical osteogenesis changes were significantly increased at 1, 3 and 6 months in comparison with pre-surgery (P < 0.001). Marginal gingiva position and alveolar ridge resorption were not significantly different between pre-surgery and 1, 3 and 6 months post-surgery. No cases of root resorption or ankylosis were observed at 6 months post-surgery. CONCLUSION: A minimally traumatic controlled surgical extrusion technique for clinical crown lengthening yielded highly successful results in both aesthetic and functional aspects, and no cases had unfavourable outcomes during the 6-month follow-up period.

Retrospective evaluation of treatment time and efficiency of a predictable cantilever system for orthodontic extrusion of impacted maxillary canines.

INTRODUCTION: Orthodontic extrusion of impacted maxillary canines requires careful biomechanical planning and the use of physiologic force. The aim of this study was to evaluate the time needed for orthodontic extrusion of impactions of different severities, using a device that can predictably apply forces under 0.6 N. METHODS: Twenty-two patients who were consecutively treated were selected retrospectively, and a total of 30 impacted canines were studied. Indexes of impaction were used to measure severity on pretreatment panoramic radiographs. Statistical analysis was used to detect interactions between treatment time, complexity of impaction, age, and sex. RESULTS: Treatment time was highly dependent on the patient's age; the shortest treatment time was observed in 11- to 12-year old patients. On the other hand, the severity of impaction had no effect on treatment time. CONCLUSIONS: Applying physiologic force with the proposed device resulted in a short treatment time, which depended on the patient's age more than the impaction complexity. Few complications were associated with use of this device. Future prospective studies are needed to replicate these findings and confirm the recommended use of this device.

Predictable method to deliver physiologic force for extrusion of palatally impacted maxillary canines.

INTRODUCTION: Orthodontic treatment of palatally impacted maxillary canines raises many difficulties; to minimize complications, careful planning of orthodontic extrusion and the use of physiologic force are crucial. The aim of this study was to quantitatively evaluate a simple and reproducible system for orthodontic extrusion of impacted canines that can provide the correct amount of force. METHODS: Ten specimens were constructed, consisting of a cantilever made with a 0.6-mm or 0.7-mm stainless steel wire modeled around a transpalatal bar with 3, 5, or 7 loops in the shape of a helical torsion spring. A mechanical testing machine was used to measure the force produced by the cantilever at 3, 6, 9, 12, and 15 mm of activation. RESULTS: The force values ranged from 1.24 ± 0.13 N for the 0.7-mm wire with 3 loops to 0.48 ± 0.04 N for the 0.6-mm wire with 7 loops. The forces measured for the 0.6-mm wire with 3 loops and the 0.7-mm wire with 7 loops were similar at 15 mm of deflection. CONCLUSIONS: The proposed system has a simple and robust design, is easy to construct and manage, and can provide the desired amount of force by changing the wire diameter and number of loops.

Combined orthodontic, surgical, and restorative approach to treat a complicated crown-root fracture in a maxillary central incisor.

This case report shows the treatment of a severe traumatic tooth injury. For the maxillary right central incisor, the trauma was considered a complicated crown-root fracture. The level of the fracture line, the length of the remaining root segment, and the presence and condition of the tooth fragment determined the type of therapy. Traumatized teeth with fractures below the alveolar crest are often considered hopeless. As this report shows, the treatment of a complicated crown-root fracture in the esthetic region can be challenging. Orthodontic extrusion and crown-length surgery were performed to bring the fracture line above the alveolar bone crest. A multidisciplinary approach was required for complete rehabilitation of the traumatized maxillary incisor. Suggestions are made to improve treatment planning of complicated crown-root fractures.

Traction of impacted canines in a skeletal Class III malocclusion: A challenging orthodontic treatment.

This case report describes the successful traction of 2 severely impacted canines. The patient, a 7-year-old girl, had good general health, nasal breathing, crossbite of the lateral incisors and canines, and a Class I molar relationship. The panoramic radiograph showed that the permanent canines were positioned above the roots of the lateral incisors, with the right canine in an accentuated inclination. The cephalometric analysis showed a skeletal Class III malocclusion with a predominance of horizontal growth. The Haas appliance associated with maxillary protraction was used during the first stage of treatment for 14 months. The second stage included the extraction of the deciduous molars, distal movement of the permanent molars to create space, and traction of the canines, and was associated with complete orthodontic treatment. The patient showed good esthetic and functional results at the end of treatment, verified by the stability over a period of 8 years after retention.

Atraumatic surgical extrusion to improve tooth restorability: A clinical report.

This clinical report describes the use of an "atraumatic" vertical extraction system to facilitate the restorative treatment of a tooth that would otherwise be considered unrestorable because of subgingival caries. Minimally invasive surgical root extrusion was undertaken using the Benex extraction system, which can provide controlled tooth extrusion with minimal deformation of the bone socket. A carious endodontically treated mandibular premolar was extruded to provide routine restorative treatment and endodontic retreatment.