Enhanced red luminescence from GdAl3(BO3)4: Pr3+ phosphors under NUV excitation.

The GdAl3(BO3)4:xPr3+ (0 ≤ x ≤ 5.0 mol%) phosphors were prepared through solid state reaction route and characterized for various lighting applications. Powder X-ray diffraction investigations revel rhombohedral structure matched to JCPDS card no. 83-1907. The morphological studies confirm the agglomeration of particles with different size and shape. The emission spectra show various emission transitions originating from Pr3+:(3P1,0, 1D2) emission states to their lower lying energy states upon 274 nm NUV excitation with a red shift for x > 0.5 mol%. The colour perception analysis results an intense red luminescence due to efficient energy transfer from Gd3+ to Pr3+ ions. The temperature-dependent luminescence investigations show good thermal stability even beyond 150°C with an activation energy of 0.24 eV. The observed experimental results show the potentiality of GdAl3(BO3)4:0.5 Pr3+ phosphor for red emitting devices and red component in phosphor converted white LEDs.

Toxicokinetics of praseodymium and cerium administered as chloride salts in Sprague-Dawley rats: impacts of the dose and of co-exposure with additional rare earth elements.

We conducted a rat exposure study to assess the impacts of dose and co-exposure with other rare earth elements (REEs) on the toxicokinetics of praseodymium (Pr) and cerium (Ce). We first determined the kinetic profiles of elemental Pr and Ce in blood, urine and feces along with tissue levels at sacrifice on the seventh day following intravenous injection of PrCl3 or CeCl3 at 0.3 or 1 mg/kg bw (of the chloride salts) in adult male Sprague-Dawley rats (n = 5 per group). In blood, Pr and Ce half-lives for the initial phase (t1/2α) increased with increasing doses, while their half-lives for the terminal phase (t1/2ß) were similar at both doses. In urine, a minor excretion route, no significant effect of the dose on the cumulative excretion was apparent. In feces, a major excretion route, the fraction of the Pr dose recovered was significantly lower at the 1 mg/kg bw dose compared to the 0.3 mg/kg bw dose, while no significant dose effect was apparent for Ce. In the liver and spleen, which are the main sites of REEs accumulation, there was a significant effect of the dose only for Ce retention in the spleen (i.e., increased retention of Ce in spleen at higher dose). Results were compared with those of a previous toxicokinetic study with a similar design but an exposure to a quaternary mixture of CeCl3, PrCl3, NdCl3 and YCl3, each administered at 0.3 mg/kg bw or 1 mg/kg bw. A mixture effect was apparent for the initial elimination phase (t1/2α) of Pr and Ce from blood and for the fecal excretion of Ce at the 1 mg/kg bw. In urine and liver, there was no evident overall mixture effect; in the spleen, there was a higher retention of Pr and Ce in rats exposed to the mixture at the 0.3 mg/kg bw, but not at the 1 mg/kg bw dose. Overall, this study showed that the dose and mixture exposure are two important factors to consider as determinants of the toxicokinetics of REEs.

Microwave-assisted synthesis of praseodymium (Pr)-doped ZnS QDs such as nanoparticles for optoelectronic applications.

Praseodymium (Pr)-doped ZnS nanoparticles were synthesized using a low-cost microwave-assisted technique and investigations on their structure, morphology, optical properties, Raman resonance, dielectric properties, and luminescence were conducted. Broad X-ray diffraction peaks suggested the formation of low-dimensional Pr-doped ZnS nanoparticles with a cubic structure that was validated using transmission electron microscopy (TEM)/high-resolution TEM analysis. The energy gaps were identified using diffuse reflectance spectroscopy and it was found that the values varied between 3.54eV and 3.61eV for different samples. Vibrational experiments on Pr-doped ZnS nanoparticles revealed significant Raman modes at ~270 and ~350 cm-1 that were associated with optical phonon modes that are shifted to lower wavenumbers, indicating phonon confinement in the synthesized products. The photoluminescence (PL) spectra of all samples demonstrated that the pure and Pr-doped ZnS nanoparticles were three-level laser active materials. Energy-dispersive X-ray spectroscopy and mapping study confirmed the homogeneous presence of Pr in ZnS. TEM studies showed that the particles were of very small size and in the cubic phase. The samples had high dielectric constant values between 13 and 24 and low loss values, according to the dielectric analysis. With an increase in frequency and a change in the Pr content of ZnS, an intense peak could be seen in the PL spectra at a wavelength of 360 nm, and some other peaks observed corresponded to the transition of Pr3+ . The produced nanoparticles were appropriate for optoelectronic applications due to their short dimension, high energy gap, high dielectric constant, and low loss values.

Peroxide-Selective Reduction of O2 at Redox-Inactive Rare-Earth(III) Triflates Generates an Ambiphilic Peroxide.

Metal peroxides are key species involved in a range of critical biological and synthetic processes. Rare-earth (group III and the lanthanides; Sc, Y, La-Lu) peroxides have been implicated as reactive intermediates in catalysis; however, reactivity studies of isolated, structurally characterized rare-earth peroxides have been limited. Herein, we report the peroxide-selective (93-99% O22-) reduction of dioxygen (O2) at redox-inactive rare-earth triflates in methanol using a mild metallocene reductant, decamethylferrocene (Fc*). The first molecular praseodymium peroxide ([PrIII2(O22-)(18C6)2(EG)2][OTf]4; 18C6 = 18-crown-6, EG = ethylene glycol, -OTf = -O3SCF3; 2-Pr) was isolated and characterized by single-crystal X-ray diffraction, Raman spectroscopy, and NMR spectroscopy. 2-Pr displays high thermal stability (120 °C, 50 mTorr), is protonated by mild organic acids [pKa1(MeOH) = 5.09 ± 0.23], and engages in electrophilic (e.g., oxygen atom transfer) and nucleophilic (e.g., phosphate-ester cleavage) reactivity. Our mechanistic studies reveal that the rate of oxygen reduction is dictated by metal-ion accessibility, rather than Lewis acidity, and suggest new opportunities for differentiated reactivity of redox-inactive metal ions by leveraging weak metal-ligand binding events preceding electron transfer.

Pr(H3BNMe2BH3)3 and Pr(thd)3 as Volatile Carriers for Actinium-225. Deposition of Actinium-Doped Praseodymium Boride Thin Films for Potential Use in Brachytherapy.

Here we show that the praseodymium N,N-dimethylaminodiboranate complex Pr(H3BNMe2BH3)3 and the 2,2,6,6-tetramethylheptane-3,5-dionate complex Pr(thd)3 can serve as volatile carriers for 225Ac. The actinium coordination complexes Ac(H3BNMe2BH3)3 and Ac(thd)3 are the likely species subliming with the carrier material. A sample of 225Ac-doped Pr(H3BNMe2BH3)3 was used to deposit amorphous 225Ac-doped praseodymium boride films on glass and Si(100) at 300 °C. The α emission spectra of the refractory films are well-resolved, suggesting that they could be used as radioactive implants for brachytherapy and related treatments.

Surfactant-Assisted Synthesis of Praseodymium Orthovanadate Nanofiber-Supported NiFe-Layered Double Hydroxide Bifunctional Catalyst: The Electrochemical Detection and Degradation of Diphenylamine.

Physiological storage disorders are caused by ineffective post-harvest handling of horticultural crops, particularly fruits. To address these post-harvest concerns, diphenylamine (DPAH•+) is widely used as a preservative to prevent fruit degradation and surface scald during storage around the world. Humans are negatively affected by the use of high concentrations of DPAH•+ because of the various health complications related to its exposure. As a result, accurate detection and quantification of DPAH•+ residues in treated fruits are critical. Rare earth metal orthovanadates, which have excellent physical and chemical properties, are potential materials for electrochemical sensors in this area. Herein, we present a simple and direct ultrasonication technique for the surfactant-assisted synthesis of praseodymium orthovanadate (PrVO4 or PrV) loaded on nickel iron layered double hydroxide (NiFe-LDH) synthesized with deep eutectic solvent assistance, as well as its application as an effective catalyst in the detection and degradation of DPAH•+ in fruits and water samples. The current work presents supreme electrochemical features of a PrV@NiFe-LDH-modified screen-printed carbon electrode (SPCE) where cetyltrimethylammonium bromide (CTAB) surfactant-driven fabrication of PrV directs the formation of highly qualified engineered structures and the deep eutectic solvent based green synthesis of NiFe-LDH creates hierarchical lamellar structures following the principles of green chemistry. PrV and NiFe-LDH combine to produce a synergistic effect that improves the number of active sites, charge transfer kinetics, and electronic conductivity. Differential pulse voltammetry analysis of PrV@NiFe-LDH/SPCE reveals a dynamic working range (0.005-226.26 µM), increased sensitivity (133.13 µA µM-1 cm-2), enhanced photocatalytic activity, and low detection limit (0.001 µM), which are considered significant when compared with the former reported electrodes in the literature for the determination of DPAH+ for its real-time applications.

Fabrication of Praseodymium Vanadate Nanoparticles on Disposable Strip for Rapid and Real-Time Amperometric Sensing of Arsenic Drug Roxarsone.

Nanomaterials have versatile properties owing to their high surface-to-volume ratio and can thus be used in a variety of applications. This work focused on applying a facile hydrothermal strategy to prepare praseodymium vanadate nanoparticles due to the importance of nanoparticles in today's society and the fact that their synthesis might be a challenging endeavor. The structural and morphological characterizations were carried out to confirm the influence of the optimizations on the reaction's outcomes, which revealed praseodymium vanadate (PrVO4) with a tetragonal crystal system. In this regard, the proposed development of electrochemical sensors based on the PrVO4 nanocatalyst for the real-time detection of arsenic drug roxarsone (RXS) is a primary concern. The detection was measured by amperometric (i-t) signals where PrVO4/SPCE, as a new electrochemical sensing medium for RXS detection, increased the sensitivity of the sensor to about ∼2.5 folds compared to the previously reported ones. In the concentration range of 0.001-551.78 µM, the suggested PrVO4/SPCE sensor has a high sensitivity for RXS, with a detection limit of 0.4 nM. Furthermore, the impact of several selected potential interferences, operational stability (2000 s), and reproducibility measurements have no discernible effect on RXS sensing, making it the ideal sensing device feasible for technical analysis. The real-time analysis reveals the excellent efficiency and reliability of the prosed sensor toward RXS detection with favorable recovery ranges between ±97.00-99.66% for chicken, egg, water, and urine samples.

Interaction of the Fungal Metabolite Harzianic Acid with Rare-Earth Cations (Pr3+, Eu3+, Ho3+, Tm3+).

Rare-earth elements (REEs) are in all respect a class of new contaminants that may have toxic effects on organisms and microorganisms and information on their interactions with natural ligands should be of value to predict and control their diffusion in natural environments. In the current study, we investigate interactions of tripositive cations of praseodymium, europium, holmium, and thulium with harzianic acid (H2L), a secondary metabolite produced by selected strains of fungi belonging to the Trichoderma genus. We applied the same techniques and workflow previously employed in an analogous study concerning lanthanum, neodymium, samarium, and gadolinium tripositive cations. Therefore, in the current study, HPLC-ESI-HRMS experiments, circular dichroism (CD), and UV-Vis spectrophotometric absorption data, as well as accurate pH measurements, were applied to characterize bonding interactions between harzianic acid and Pr3+, Eu3+, Ho3+, and Tm3+ cations. Problems connected to the low solubility of harzianic acid in water were overcome by employing a 0.1 M NaClO4/(CH3OH + H2O 50/50 w/w) mixed solvent. For Pr3+, Ho3+, and Tm3+, only the mono complexes PrL+, HoL+, and TmL+ were detected and their formation constant determined. Eu3+ forms almost exclusively the bis complex EuL2- for which the corresponding formation constant is reported; under our experimental conditions, the mono complex EuL+ is irrelevant. Combining the results of the present and previous studies, a picture of interactions of harzianic acid with rare-earth cations extending over 8 of the 17 REEs can be composed. In order to complement chemical information with toxicological information, a battery of bioassays was applied to evaluate the effects of praseodymium, europium, holmium, and thulium tripositive cations on a suite of bioindicators including Aliivibrio fischeri (Gram-negative bacterium), Raphidocelis subcapitata (green alga), and Daphnia magna (microcrustacean), and median effective concentration (EC50) values of Pr3+, Eu3+, Ho3+, and Tm3+ for the tested species were assessed.

Removal of 142Pr from nuclear purity water using hydroxyapatite.

The adsorption of praseodymium using hydroxyapatite was evaluated. The hydroxyapatite (HAP) was characterized by X-ray diffraction (JCPDS 01-04-3708), scanning electron microscopy, BET specific surface area (54.2 m2/g), and point of zero charge (6.5). Adsorption kinetics and isotherms were evaluated at pH of 3 and 142Pr was determined using a gamma spectrometer. The adsorption of praseodymium was fast (1 min of contact) with an adsorption capacity of 1.68 mg/g and the data were best adjusted to the pseudo-second-order model, whereas the data of adsorption isotherm were best adjusted to the Langmuir model with a maximum adsorption capacity of 39.16 ± 0.20 mg/g. The thermodynamic parameters indicated that a physicochemical mechanism took place in the adsorption of praseodymium by HAP (adsorption enthalpy = 31.65 kJ/mol), the randomness of the system increased (adsorption entropy = 0.16 kJ/mol), and according with Gibbs free energy, the adsorption process was spontaneous at high temperature. The praseodymium in the hydroxyapatite is stable, it could not be desorbed using different solutions (ammonium sulfate, calcium chloride, sodium chloride, hydrochloric acid, and sodium hydroxide).

Synthesis and Characterization of Pyrochlore-Type Praseodymium Stannate Nanoparticles: An Effective Electrocatalyst for Detection of Nitrofurazone Drug in Biological Samples.

Apart from perovskites, the development of different types of pyrochlore oxides is highly focused on various electrochemical applications in recent times. Based on this, we have synthesized pyrochlore-type praseodymium stannate nanoparticles (Pr2Sn2O7 NPs) by using a coprecipitation method and further investigated by different analytical and spectroscopic techniques such as X-ray diffraction, Raman spectroscopy, field emission-scanning electron microscopy, high resolution-transmission electron microscopy, and X-ray photoelectron spectroscopy analysis. Followed by this, we have designed a unique and novel electrochemical sensor for nitrofurazone detection, by modifying the glassy carbon electrode (GCE) with the prepared Pr2Sn2O7 NPs. For that, the electrochemical experiments were performed by using cyclic voltammetry and differential pulse voltammetry techniques. The Pr2Sn2O7 NPs modified GCE exhibits high sensitivity (2.11 µA µM-1 cm-2), selectivity, dynamic linear ranges (0.01-24 µM and 32-332 µM), and lower detection limit (4 nM). Furthermore, the Pr2Sn2O7 NPs demonstrated promising real sample analysis with good recovery results in biological samples (human urine and blood serum) which showed better results than the noble metal catalysts. Based on these results, the present work gives clear evidence that the pyrochlore oxides are highly suitable electrode materials for performing outstanding catalytic activity toward electrochemical sensors.

Rare Earth Elements Lanthanum and Praseodymium Adversely Affect Neural and Cardiovascular Development in Zebrafish (Danio rerio).

Increasing rare earth element (REE) mining and refining activities have led to a considerable release of these substances into aquatic environment, yet the knowledge of their impacts on aquatic organisms is still limited. Here, we explored the developmental effects of 16 REEs (concentration ranged from 0.46 to 1000 mg/L) to zebrafish embryos and highlighted the adverse effects of lanthanum (La) and praseodymium (Pr). Among the multiple developmental parameters measured, the significant effects on swimming behavior and cardiac physiology were the most prominent. Transcriptomic analysis of La and Pr at concentrations of 1.1 to 10 mg/L revealed their rather uniform effects at molecular levels. The Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways analysis revealed that among others, notch, glutamate, and serotonin signaling, as well as cardiac hypertrophy and cardiac muscle contraction, were significantly affected. These changes of neural signaling were consistent with behavior effects observed and supported by neurotransmitter changes and thus provide a reasonable molecular mechanistic explanation. Furthermore, increased DNA damage and apoptotic activity at high concentrations were observed, especially in the heart. They may contribute to explain the observed adverse morphological and physiological outcomes, such as pericardial edema. The effect concentrations observed in the present study were comparable to the concentrations of REE residues at highly contaminated sites (several mg/L), indicating ecotoxicological effects at environmentally relevant concentrations. Overall, the present data help to clarify the potential developmental toxicity of REEs that was not yet fully recognized and thus contribute to their environmental risk assessment.

Nanotized praseodymium oxide collagen 3-D pro-vasculogenic biomatrix for soft tissue engineering.

The current study explores development of highly vascularizable biomatrix scaffold containing rare-earth metal praseodymium oxide nanoadditives for angiogenic and soft tissue regenerative applications. The therapeutic potential of praseodymium oxide nanoparticles rendered excellent endothelial cell differentiation for inducing pro angiogenic microenvironment by eliciting VE-Cadherin expression in the biomatrix scaffold. The nanoparticles were incorporated into bio-macromolecule collagen which aided in stabilization of collagen by maintaining the structural integrity of collagen and showed less susceptibility towards protease enzymes, high cyto-compatibility and high hemo-compatibility. The scaffold provided 3-dimensional micro-environments for the proliferation of endothelial cells and fibroblast cells promoting the wound healing process in an orchestrated fashion. Biological signal modulatory property of rare earth metal is the unexplored domains that can essentially bring significant therapeutic advancement in engineering advanced biological materials. This study opens potential use of nano-scaled rare earth metals in biomaterial application for tissue regeneration by modulating the pro-angiogenesis and anti-proteolysis properties.

Synthesis and luminescence properties of Pr3+ ion-doped Ba3 Y(PO4 )3 phosphors.

Barium yttrium phosphate (BYP) phosphor doped with trivalent praseodymium ions (BaY(1-x) (PO4 )3 :Pr3+ (x = 0, 0.01, 0.05, 0.1, 0.15, and 0.2 wt%) was synthesized using a high temperature solid-state reaction method. Structural properties were analyzed through X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. XRD patterns confirmed the structure of the synthesized phosphor and average crystalline size was estimated (approximately 63.8 Å). Vibrational functional groups were identified using FTIR spectroscopy. The emission spectrum was recorded under an 444 nm excitation wavelength, which showed various emission transitions of Pr3+ ions. Commission Internationale de l'éclairage coordinates, colour purity, and colour correlated temperature values were calculated for the BYP:Pr3+ phosphors and these coordinate values fell in the yellow region of the visible spectrum.

Praseodymium selective fluorescence recognition based on GdPO4: Tb3+ probe via energy transfer from Tb3+ to Pr3+ ions.

A novel strategy is proposed based on the efficient energy transfer from Tb3+ to Pr3+ for the sensitive and selective discrimination of praseodymium ions due to the matched energy levels of 5D4 (Tb3+) and 3P0 (Pr3+). The electron of Tb3+ transfers from the ground state to the excited state under the excitation of ultraviolet light and relaxes to the 5D4 level. In the presence of Pr3+ the electron has no time to return to the ground state, thus it transfers to the 3P0 level of Pr3+ resulting in the quenching of Tb3+ luminescence. In the case of GdPO4: Tb3+ nanowire, its fluorescence intensity at 545 nm linearly decreased when Pr3+ concentration ranged from 1 × 10-7 to 1 × 10-5 M, and the detection limit was 75 nM. To further investigate the sensing mechanism, CePO4: Tb3+, YPO4: Tb3+, and YBO3: Tb3+ nanoparticles were also synthesized for Pr3+ ion detection. For all materials, similar fluorescence quenching by Pr3+ ions occurred, which confirmed the efficient energy transfer from Tb3+ to Pr3+ ions. Utilizing the matched energy levels of 5D4 (Tb3+) and 3P0 (Pr3+), for the first time, we proposed a novel strategy (taking GdPO4: Tb3+ probe as the example) based on the efficient energy transfer from Tb3+ to Pr3+ for the sensitive and selective discrimination of praseodymium ions.

One-pot synthesis of cerium and praseodymium co-doped carbon quantum dots as enhanced antioxidant for hydroxyl radical scavenging.

The antioxidant activity of ceria nanoparticles is tightly regulated by size distribution and heteroatom doping. Inspired by this rule, cerium and praseodymium codoped carbon quantum dots (Ce/Pr-CQDs) were synthesized through the one-pot hydrothermal carbonization method. Taking intrinsic advantage of CQDs, the resultant Ce/Pr-CQDs exhibited uniform and ultra-small morphology with an average size of 2.8 nm, which led to an increased proportion of Ce3+. In addition, the doping of Pr into Ce-CQDs improved the redox properties. As we expected, the Ce/Pr-CQDs possessed enhanced hydroxyl radical scavenging properties compared with the cerium-doped carbon quantum dots (Ce-CQDs). Furthermore, Ce/Pr-CQDs with favorable biocompatibility and negligible cytotoxicity are readily internalized into cytoplasm, decreasing the level of reactive oxygen species (ROS). Taken together, the resultant Ce/Pr-CQDs displayed great potential for applications relating to oxidative-stress-associated disease.

A novel optical approach for determination of prolactin based on Pr-MOF nanofibers.

The analytical quantification and follow-up of the hormone prolactin is very important in clinical diagnosis (e.g., in cases of breast cancer), treatment, and the medical laboratory. The development of a new simple, fast, and less costly method is of considerable importance. Novel praseodymium metal-organic framework nanofibers (Pr-MOF-NFs) were synthesized by a facile and simple method for the determination of human prolactin in serum samples. The Pr-MOF-NFs were well characterized with several spectroscopic tools, such as mass spectrometry, Fourier transform IR spectroscopy, UV-vis spectroscopy, elemental analysis, X-ray diffraction, field-emission scanning electron microscopy combined with energy-dispersive X-ray spectroscopy, and high-resolution transmission electron microscopy. The photoluminescence of Pr-MOF-NFs was investigated, and the results revealed that Pr-MOF-NFs could be used as a sensitive and selective nanofiber optical sensor for the detection of human prolactin. The calibration graph was studied over a wide prolactin concentration range of 0-200 ng/mL, with limits of detection and quantitation of 0.276 and 0.838 ng/mL, respectively, lower than the values mentioned in previous reports. The correlation coefficient was 0.9792. Moreover, the Pr-MOF-NFs were applied successfully for the detection of serum human prolactin at clinically applicable concentrations without interference from several types of hormones and various interfering analytes. Graphical abstract.

Synthesis of Nano-Praseodymium Oxide for Cataluminescence Sensing of Acetophenone in Exhaled Breath.

In this work, we successfully developed a novel and sensitive gas sensor for the determination of trace acetophenone based on its cataluminescence (CTL) emission on the surface of nano-praseodymium oxide (nano-Pr6O11). The effects of working conditions such as temperature, flow rate, and detecting wavelength on the CTL sensing were investigated in detail. Under the optimized conditions, the sensor exhibited linear response to the acetophenone in the range of 15-280 mg/m3 (2.8-52 ppm), with a correlation coefficient (R2) of 0.9968 and a limit of detection (S/N = 3) of 4 mg/m3 (0.7 ppm). The selectivity of the sensor was also investigated, no or weak response to other compounds, such as alcohols (methanol, ethanol, n-propanol, iso-propanol, n-butanol), aldehyde (formaldehyde and acetaldehyde), benzenes (toluene, o-xylene, m-xylene, p-xylene), n-pentane, ethyl acetate, ammonia, carbon monoxide, carbon dioxide. Finally, the present sensor was applied to the determination of acetophenone in human exhaled breath samples. The results showed that the sensor has promising application in clinical breath analysis.

Luminescence and structural characterization on praseodymium (Pr3+) doped potassium bromide (KBr) single crystals.

The luminescence properties of praseodymium (Pr3+ ) ion in potassium bromide (KBr) host have been investigated. The excitation bands observed in the region 220-300 nm are attributed to the transitions from 4f level to the 5d crystal field splitting levels of Pr3+ ion. Emission bands originated due to transition of 3 P2 →3 H6 (564 nm), 3 P0 →3 H6 (604 nm), 1 D2 →3 P4 (721 nm) and 3 P0 →3 F2 (659 nm) have been observed. Optical absorption, photoluminescence (PL) and thermoluminescence (TL) studies confirms the trivalent state of Pr3+ ion in KBr host. Trap parameters for the TL glow curve have been calculated and the values are tabulated by using Chen's peak shape method. The lattice cell parameters of Pr3+ doped KBr single crystals are a = b = c = 6.596 Å, α = ß = Î³ = 90°. From the scanning electron microscopy (SEM) micrograph analysis, the particle size ranges from a few micrometres to 5 µm. Electron paramagnetic resonance (EPR) spectrum exhibits two resonance signals at magnetic fields of 2895 and 3106 gauss with g-values of 2.32 and 2.16, respectively, calculated using Lande's formula.

Tunable luminescent properties of BaGd2 O4 :Eu3+ scintillating phosphors by Pr3+ -codoping.

BaGd2 O4 :Eu3+ scintillating phosphors by Pr3+ -codoping were synthesized at 1300°C in air using a solid-state reaction method. The as-synthesized phosphors were characterized by X-ray diffraction (XRD), photoluminescence (PL) including excitation and emission spectra, radioluminescence (RL) spectra excited by X-ray and thermoluminescence (TL) spectra. Both the PL and RL spectra are composed of the featured trivalent europium (Eu3+ ) without any praseodymium (Pr3+ ) ions, and the PL and RL intensities as well as the lifetimes of BaGd2 O4 :Eu3+ scintillating phosphors decrease dramatically with an increasing concentration of Pr3+ ions. Finally, the TL spectra reveal the trap concentration of the existing defects decrease with an increasing concentration of Pr3+ ions, while the relative TL intensity ratio of the high temperature band to the low temperature one increases with an increasing concentration of Pr3+ ions, which results in the afterglow suppression of BaGd2 O4 :Eu3+ scintillating phosphors.

Biosorption of praseodymium (III) using Terminalia arjuna bark powder in batch systems: isotherm and kinetic studies.

The high demand for rare earth elements (REEs) used in various advanced materials implies demand for increased production of REEs or the recycling of solutions to recover the REEs they contain. In this study, the biosorption of Pr(III) from aqueous solution by bark powder of Terminalia arjuna was examined in a batch system as a function of metal concentration, biosorbent dosage, pH and contact time. Results showed that T. arjuna bark powder has a high affinity for adsorbing Pr(III): more than 90% at pH 6.63. The adsorption of Pr(III) by T. arjuna bark powder was investigated by the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The kinetics of the biosorption process was tested with pseudo-first-order and pseudo-second-order models, and the results showed that the biosorption process was better fitted to the pseudo-second-order model. From Fourier transform infrared spectroscopy (FT-IR) analysis, it is confirmed that the biomolecules of T. arjuna bark powder are involved in the biosorption process of Pr(III) metal ions.