Comparative image simulations for phase-plate transmission electron microscopy.

Numerous physical phase plates (PP) for phase-contrast enhancement in transmission electron microscopy (TEM) have been proposed and studied with the hole-free or Volta PP having a high impact and interest in recent years. This study is concerned with comparative TEM image simulations considering realistic descriptions of various PP approaches and samples from three different fields of application covering a large range of object sizes. The simulated images provide an illustrative characterization of the typical image appearance and common artifacts of the different PPs and the influence of simulation parameters especially important for PP simulations. A quantitative contrast analysis shows the superior phase-shifting properties of the hole-free phase plate for biological applications and the benefits of adjustable phase plates. The application of PPs in high-resolution TEM imaging, especially of weak-phase objects such as (atomically thin) 2D materials, is shown to increase image interpretability. The software with graphical user interface written and used for the presented simulations is available for free usage.

Scattered electrons in microscopy and microanalysis.

The use of scattered electrons alone for direct imaging of biological specimens makes it possible to obtain structural information at atomic and near-atomic spatial resolutions of 0.3 to 0.5 nanometer. While this is not as good as the resolution possible with x-ray crystallography, such an approach provides structural information rapidly on individual macromolecules that have not been, and possibly cannot be, crystallized. Analysis of the spectrum of energies of scattered electrons and imaging of the latter with characteristic energy bands within the spectrum produces a powerful new technique of atomic microanalysis. This technique, which has a spatial resolution of about 0.5 nanometer and a minimum detection sensitivity of about 50 atoms of phosphorus, is especially useful for light atom analysis and appears to have applications in molecular biology, cell biology, histology, pathology, botany, and many other fields.

Neutral mass spectrometry of virus capsids above 100 megadaltons with nanomechanical resonators.

Measurement of the mass of particles in the mega- to gigadalton range is challenging with conventional mass spectrometry. Although this mass range appears optimal for nanomechanical resonators, nanomechanical mass spectrometers often suffer from prohibitive sample loss, extended analysis time, or inadequate resolution. We report on a system architecture combining nebulization of the analytes from solution, their efficient transfer and focusing without relying on electromagnetic fields, and the mass measurements of individual particles using nanomechanical resonator arrays. This system determined the mass distribution of ~30-megadalton polystyrene nanoparticles with high detection efficiency and effectively performed molecular mass measurements of empty or DNA-filled bacteriophage T5 capsids with masses up to 105 megadaltons using less than 1 picomole of sample and with an instrument resolution above 100.

Effect of thermoinduced changes in T4 bacteriophage structure on the process of molecular recognition of 'host' cells.

By means of high-precision acoustic measurements and by methods of fluorescent and electron microscopy, investigations have been performed of thermoinduced conformational changes in T4 bacteriophage and its thermolabile mutants altered in baseplate proteins (gene products 7, 8, 10). A relationship was found between the conformational changes in T4 bacteriophage structure in the temperature range of 33-45 degrees C and the efficiency of bacteriophage adsorption and the changes in the orientation of long tail fibers. The possibility of heat regulation of 'recognition' of 'host' cells by bacterial viruses is suggested.

Structural analysis of T4 DNA helix destabilizing protein (gp32 I) crystal by electron microscopy.

Low dose electron diffraction and imaging techniques have been applied to the study of the crystalline structure of gp32*I, a DNA helix destabilizing protein derived from bacteriophage T4 gene 32 protein. A quantitative analysis of intensities from electron diffraction patterns from tilted, multilayered gp32*I crystal has provided the unit cell thickness of the crystal. The three-dimensional phases indicate that the space group P2(1)2(1)2. By taking into account the unit cell volume and the solvent content in the crystal, it was deduced that there is one gp32*I molecule in each asymmetric unit. A projected density map of unstained, glucose-embedded gp32*I crystal was synthesized with amplitudes from electron diffraction intensities and phases from electron images with reflections out to 7.6 A. Because of the similarity in the scattering density between glucose and protein, this projected map cannot be interpreted with certainty. A low resolution three-dimensional reconstruction shows that the protein molecule is about 90 A long and about 20 A in diameter. Because the dimer is formed around a dyad axis, the protein molecules comprising it must be arranged head-to-head. This dimeric arrangement of the proteins in the unit cell may be implicated as one of the conformational states of this protein in solution.

Three-dimensional structure of unstained, frozen-hydrated extended tails of bacteriophage T4.

Unsupported, unstained frozen-hydrated extended tails of bacteriophage T4 have been studied by cryo-electron microscopy. Their three-dimensional structure has been reconstructed after correlation and averaging of the information from different particles. While the reconstructions of hydrated tails show all the features found by conventional electron microscopy, they are characterized by an open structure. Individual subunits constituting the axial repeat cannot be outlined unambiguously, as the density connectivity is sensitive to the phase-contrast transfer function effects. In order to minimize these effects, we found that the best data set for three-dimensional reconstruction is composed of layer-lines corrected for the phase-contrast transfer function and an uncorrected equator.

Amber mutants in gene 67 of phage T4. Effects on formation and shape determination of the head.

Two amber mutations in gene 67 of bacteriophage T4 were constructed by oligonucleotide-directed mutagenesis and the resulting mutated genes were recombined back into the phage genome and their phenotype was studied. The 67amK1 mutation is close to the amino terminus of the gene, and phage carrying this mutation are unable to form plaques on suppressor-negative hosts. A second mutation, 67amK2, which lies in the middle of the gene, three codons N-terminal to a proteolytic cleavage site, produces a small number of viable phage particles. In suppressor-negative hosts, both mutants produce polyheads and proheads. 67amK1 assembles only few proheads that have a disorganized core structure, as judged from thin sections of infected cells. The proheads and the mature phages of both mutants are mainly isometric rather than having the usual prolate shape. Depending on the 67 mutant and the host, between 20% and 73% of the particles that are produced are isometric, and 1 to 10% are two-tailed biprolate particles. 67amK2 phages grown on a supD suppressor strain that inserts serine in place of the wild-type leucine do not contain gp67* derived from gene product 67 (gp67) by proteolytic cleavage. This demonstrates the importance of the correct amino acid at this position in the protein. Other abnormalities in these 67amK2 phages are the presence of uncleaved scaffolding core proteins (IPIII and gp68), indicating a structural alteration in the prohead scaffold, resulting in only partial cleavage. In wild-type phages these proteins are found in the head only in the cleaved form. With double-mutants of 67 with mutations in the major shell protein gp23 no naked scaffolding cores were found, confirming the necessity of gp67 for the assembly or persistence of a "normal" core.

Arrangement of double-stranded DNA packaged in bacteriophage capsids. An alternative model.

Toroidal winding of double-stranded DNA in the protein capsids of bacteriophages has been proposed previously. An alternative model for the packaging and arrangement of DNA in bacteriophage capsids is presented here. By introducing sharp folds, the alternative model avoids toroidal winding and its accompanying difficulties. This alternative model is in agreement with the current data obtained with several different bacteriophages.

Analysis of symmetry and three-dimensional reconstruction of thin gp32*I crystals.

Thin, multilayered crystals of gp32*I were analyzed by negative stain electron microscopy and image processing. Images of untilted crystals exhibited different projection symmetries and structural motifs. Systematic analysis of these images categorized the projections into four types. Areas producing the type 1 projection were reconstructed in three-dimensions from four tilt series containing 111 images. The three-dimensional data has excellent p121 plane group symmetry and reveals that the gp32*I molecule contains two large domains linked together by a small domain. Computer simulations utilizing projection data suggested that the type 2 and 3 projections arise from superposition of type 1 projections related by a 21 screw axis along the projection axis. The three-dimensional reconstruction was utilized in a final simulation that explained the occurrence of the fourth type of projection. This work provides a firm foundation for future high-resolution analysis of the crystal by electron cryomicroscopy.

Assembly and disassembly of bacteriophage T4 polyheads.

The assembly of the product of bacteriophage T4 gene 23 (gp23), the uncleaved form of the main shell protein, has been studied. Assembly and disassembly follow the predictions for entropy-driven processes; assembly is strongly favored by conditions of high salt concentrations and high temperatures, whereas low salt and low temperatures promote disassembly. In the absence of the scaffolding core proteins in vitro, only polyheads, the tubular variant of the prohead, are produced. Kinetic studies show that the rate of polyhead dissociation depends on the concentration of associated protein, not on the number and length of the particles. Comparable to crystal formation, assembly of gp23 occurs above a critical concentration, which is dependent on salt concentration, pH and temperature. These characteristics are common to most self-assembling systems. The oligomeric states of gp23 have been investigated by analytical ultracentrifugation, which indicated the existence, at very low salt concentration and low temperature, of an equilibrium between monomers and higher oligomers, culminating in the hexamer. At pH 9.0 polyheads are completely dissociated into their monomeric gp23 subunits. Our data suggest that the hexamer is a true intermediate of polyhead assembly.

Gene 20 product of bacteriophage T4. II. Its structural organization in prehead and bacteriophage.

The location of gene 20 product of bacteriophage T4 in phage and phage percursors has been determined by immunochemical analysis of polyacrylamide gels, immunoturbidimetry and immunoelectron microscopy. The protein is present at the membrane attachment site of the prehead, a head precursor, and is accessible to the antibodies in the solution. It is present at the tail attachment site of the capsid, partially buried in the structure. In complete phage particles it is totally buried in the structure. It is in contact with the major shell proteins, gp23 and gp23*, respectively, in preheads and capsids, as revealed by partial crosslinking experiments. It forms the upper collar of the neck in necked tails. The lower collar is constructed from other gene products. On the basis of these data a structural model of the neck region of the phage has been derived. This model is consistent with a number of events in phage assembly, such as the role of gp20 in head assembly and DNA packaging, prehead detachment from the bacterial membrane and head-tail attachment. The symmetry mismatch known to occur between head and tail has been localized at the gp20-gp23* contact area.

Attachment of tail fibers in bacteriophage T4 assembly. Identification of the baseplate protein to which tail fibers attach.

A phage-neutralizing rabbit antiserum collected after immunization with tail-fiberless bacteriophage T4 particles was adsorbed with complete T4 phage. The resulting adsorbed serum inhibited tail fiber attachment in vitro. To identify the antigens against which this inhibitory activity was directed, blocking experiments were carried out with the adsorbed serum. Isolated complete baseplates and mutant-infected-cell extracts lacking known baseplate gene products but containing gene 9 product showed similar high levels of blocking activity. By contrast, both tail-fiberless particles lacking gene 9 product and infected-cell extracts made with gene 9 mutants showed 30-fold to 100-fold lower blocking activity. These results strongly support the conclusion that gene 9 product is the baseplate protein to which tail fibers attach.

Localization of the proteins gp7, gp8 and gp10 in the bacteriophage T4 baseplate with colloidal gold: F(ab)2 and undecagold: Fab' conjugates.

We report the localization of the proteins gp7, gp8 and gp10 in the bacteriophage T4 baseplate. Proceeding on the assumption that these proteins occupy discrete locations, we have decorated baseplates and tails with immunological probes. Using 5 nm diameter colloidal gold: F(ab')2 conjugates, we show that proteins gp7 and gp10 are located directly at the vertex, with gp10 positioned in the pin directly below gp7. gp8 is located beside gp7 towards the centre of the baseplate. Using a novel undecagold: Fab' conjugate we have also determined the radial positions of gp7 and gp8 in baseplates that have transformed to stars. A mechanism for the nature of the hexagon-to-star transformation is proposed.

Role of gene 6 exonuclease in the replication and packaging of bacteriophage T7 DNA.

When bacteriophage T7 gene 6 exonuclease is genetically removed from T7-infected cells, degradation of intracellular T7 DNA is observed. By use of rate zonal centrifugation, followed by either pulsed-field agarose gel electrophoresis or restriction endonuclease analysis, in the present study, the following observations were made. (1) Most degradation of intracellular DNA requires the presence of T7 gene 3 endonuclease and is independent of DNA packaging; rapidly sedimenting, branched DNA accumulates when both the gene 3 and gene 6 products are absent. (2) A comparatively small amount of degradation requires packaging and occurs at both the joint between genomes in a concatemer and near the left end of intracellular DNA; DNA packaging is only partially blocked and end-to-end joining of genomes is not blocked in the absence of gene 6 exonuclease. (3) Fragments produced in the absence of gene 6 exonuclease are linear and do not further degrade; precursors of the fragments are non-linear. (4) Some, but not most, of the cleavages that produce these fragments occur selectively near two known origins of DNA replication. On the basis of these observations, the conclusion is drawn that most degradation that occurs in the absence of T7 gene 6 exonuclease is caused by cleavage at branches. The following hypothesis is presented: most, possibly all, of the extra branching induced by removal of gene 6 exonuclease is caused by strand displacement DNA synthesis at the site of RNA primers of DNA synthesis; the RNA primers, produced by multiple initiations of DNA replication, are removed by the RNase H activity of gene 6 exonuclease during a wild-type T7 infection. Observation of joining of genomes in the absence of gene 6 exonuclease and additional observations indicate that single-stranded terminal repeats required for concatamerization are produced by DNA replication. The observed selective shortening of the left end indicates that gene 6 exonuclease is required for formation of most, possibly all, mature left ends.

Conformation of DNA packaged in bacteriophage T7. Analysis by use of ultraviolet light-induced DNA-capsid cross-linking.

The conformation of the linear, double-stranded, 39,936 kilobase-pair DNA packaged in the protein capsid of bacteriophage T7 is investigated here by use of short wavelength ultraviolet light-induced DNA-capsid cross-linking. To detect both DNA-capsid and DNA-DNA cross-links, DNA is expelled from the T7 capsid and the products of expulsion are analyzed by use of Nycodenz buoyant density centrifugation, followed by either pulsed field gel electrophoresis or invariant field gel electrophoresis. Short wavelength ultraviolet light is found to progressively induce both DNA-DNA and DNA-protein cross-links in intact bacteriophage T7, but not in T7 from which DNA had been expelled before exposure to ultraviolet light. Protein-protein cross-links are not induced. When DNA expelled from previously cross-linked T7 is cleaved with restriction endonuclease (1 to 3 sites cleaved), analysis of the resulting fragments reveals no regions on T7 DNA that are excluded from cross-linking to the capsid. However, the efficiency of cross-linking decreases as the distance from the left end (last end packaged) of the packaged DNA increases. Electron microscopy of negatively stained capsid-DNA complexes reveals no DNA-retaining structure other than the outer shell of the capsid. Together with previously reported data that indicate lack of protein-based specificity for ultraviolet light-induced cross-linking, these observations are interpreted by the assumptions that, within the limits of resolution of these experiments: (1) no region of packaged T7 DNA is excluded from contact with the outer shell of the T7 capsid; (2) the probability of contacting the outer shell decreases as the distance from the left end of packaged T7 DNA increases. Thus, T7 DNA packaging concentrates the last end packaged near the inner surface of the outer shell of the T7 capsid.

GTPase activity of bacteriophage T4 sheath protein.

We show by nuclear magnetic resonance studies that, following GTP hydrolysis during phage T4 sheath contraction, GDP remains bound to the sheath protein (gp18), whereas orthophosphate is released. gp18 in the contracted state has GTPase activity and can hydrolyse exogenous GTP; the reaction is calcium-dependent and displays high substrate specificity. The process comprises two steps: (1) displacement of GDP from gp18 by exogenous GTP, and (2) GTP hydrolysis proper. The first step appears to be rate-limiting and to be accelerated when the nucleotide-protein interaction is mechanically disrupted by sonication.

Cryoelectron microscopic visualization of functional subassemblies of the bacteriophage T4 DNA replication complex.

A specific complex of proteins involved in bacteriophage T4 replication has been visualized by cryoelectron microscopy as distinctive structures in association with DNA. Formation of these structures, which we term "hash-marks" for their characteristic appearance in association with DNA, requires the presence of the T4 polymerase accessory proteins (the products of T4 genes 44, 45 and 62), ATP and appropriate DNA cofactors. ATP hydrolysis by the DNA-stimulated ATPase activity of the accessory proteins is required for visualization of the hash-mark structures. If ATP hydrolysis is stopped by chelation of Mg2+, by dilution with a non-hydrolyzable ATP analogue, or by exhaustion of the ATP supply, the DNA-associated structures disappear within seconds to minutes, indicating that they have a finite and relatively short lifetime. The labile nature of the structures makes their study by more conventional methods of electron microscopy, as well as by most other structural approaches, difficult if not impossible. Addition of T4 gene 32 protein increases the number of hash-mark structures, as well as increasing the rate of ATP hydrolysis. Using plasmid DNA in either a native (supercoiled) or enzymatically modified state, we have shown that nicked or gapped DNA is required as a cofactor for hash-mark formation. Stimulation of the ATPase activity of the accessory proteins has a similar cofactor requirement. These conditions for the formation and visualization of the structures parallel those required for the action of these complexes in promoting the enzymatic activity of the T4 DNA polymerase, as well as the transcription of late T4 genes. Substructure in the hash-marks has been examined by image analysis, which reveals a variation in the projected density of the subunits comprising the structures. The three-dimensional size of the hash-marks, modeled as a solid ellipsoid, is consistent with that of the gene 44/62 protein subcomplex. Density variations suggest an arrangement of subunits, either tetragonal or trigonal, viewed from a variety of angles about the DNA axis. The hash-mark structures often appear in clusters, even in DNA that has a single nick. We interpret this distribution as the result of one-dimensional translocation of the hash-marks along the DNA after their ATP-dependent initial association with, and injection into, the DNA at nicks or gaps.

Gene 68, a new bacteriophage T4 gene which codes for the 17K prohead core protein is involved in head size determination.

We have identified the gene for a major component of the prohead core of bacteriophage T4, the 17K protein. The gene, which we call gene 68, lies between genes 67 and 21 in the major cluster of T4 head genes. All of the genes in this region of the T4 genome have overlapping initiation and termination codons with the sequence T-A-A-T-G. We present the DNA sequence of the gene and show that it codes for a protein containing 141 amino acids with an acidic amino-terminal half and a basic carboxyl terminus. Antibodies prepared against the 17K protein were used to show that it is cleaved by the phage-coded gp21 protease during head maturation and that most of the protein leaves the head after cleavage. A frameshift mutation of the gene was constructed in vitro and recombined back into the phage genome. The mutated phages had a drastically reduced burst size and about half of the particles produced were morphologically abnormal, having isometric rather than prolate heads. Thus, the 17K protein is involved in head shape determination but is only semi-essential for T4 growth.

Bacteriophage T7 DNA packaging. I. Plasmids containing a T7 replication origin and the T7 concatemer junction are packaged into transducing particles during phage infection.

Bacteriophage T7 DNA is a linear duplex molecule with a 160 base-pair direct repeat (terminal redundancy) at its ends. During replication, large DNA concatemers are formed, which are multimers of the T7 genome linked head to tail through recombination at the terminal redundancy. We define the sequence that results from this recombination, a mature right end joined to the left end of T7 DNA, as the concatemer junction. To study the processing and packaging of T7 concatemers into phage particles, we have cloned the T7 concatemer junction into a plasmid vector. This plasmid is efficiently (at least 15 particles/infected cell) packaged into transducing particles during a T7 infection. These transducing particles can be separated from T7 phage by sedimentation to equilibrium in CsCl. The packaged plasmid DNA is a linear concatemer of about 40 x 10(3) base-pairs with ends at the expected T7 DNA sequences. Thus, the T7 concatemer junction sequence on the plasmid is recognized for processing and packaging by the phage system. We have identified a T7 DNA replication origin near the right end of the T7 genome that is necessary for efficient plasmid packaging. The origin, which is associated with a T7 RNA polymerase promoter, causes amplification of the plasmid DNA during T7 infection. The amplified plasmid DNA sediments very rapidly and contains large concatemers, which are expected to be good substrates for the packaging reaction. When cloned in pBR322, a sequence containing only the mature right end of T7 DNA is sufficient for efficient packaging. Since this sequence does not contain DNA to the right of the site where a mature T7 right end is formed, it was expected that right ends would not form on this DNA. In fact, with this plasmid the right end does not form at the normal T7 sequence but is instead formed within the vector. Apparently, the T7 packaging system can also recognize a site in pBR322 DNA to produce an end for packaging. This site is not recognized solely by a "headful" mechanism, since there can be considerable variation in the amount of DNA packaged (32 x 10(3) to 42 x 10(3) base-pairs). Furthermore, deletion of this region from the vector DNA prevents packaging of the plasmid. The end that is formed in vector DNA is somewhat heterogeneous. About one-third of the ends are at a unique site (nucleotide 1712 of pBR322), which is followed by the sequence 5'-ATCTGT-3'. This sequence is also found adjacent to the cut made in a T7 DNA concatemer to produce a normal T7 right end.

Formation of the right before the left mature DNA end during packaging-cleavage of bacteriophage T7 DNA concatemers.

During bacteriophage T7 morphogenesis in a T7-infected cell, mature length T7 DNA molecules join end-to-end to form concatemers that are subsequently both packaged in the T7 capsid and cut to mature size. In the present study, the kinetics of the appearance in vivo of the mature right and left T7 DNA ends have been analyzed. To perform this analysis, the intercalating dye proflavine is used to interrupt DNA packaging. When used at 0.5 to 8.0 micrograms/ml, proflavine progressively inhibits events in the T7 DNA packaging pathway, without either altering protein synthesis or degrading intracellular T7 DNA. Restriction endonuclease kinetic analysis reveals that proflavine (8 micrograms/ml) completely blocks formation of the mature T7 DNA left end, but only partially blocks formation of the mature T7 DNA right end. Both these and other observations are explained by the hypothesis that, in the T7 DNA packaging pathway, events occur in the following sequence: (1) formation of a mature right end; (2) packaging of at least some of the genome; (3) formation of the mature left end.