Emerging Chemical Diversity and Potential Applications of Enzymes in the DMSO Reductase Superfamily.

Molybdenum- and tungsten-dependent proteins catalyze essential processes in living organisms and biogeochemical cycles. Among these enzymes, members of the dimethyl sulfoxide (DMSO) reductase superfamily are considered the most diverse, facilitating a wide range of chemical transformations that can be categorized as oxygen atom installation, removal, and transfer. Importantly, DMSO reductase enzymes provide high efficiency and excellent selectivity while operating under mild conditions without conventional oxidants such as oxygen or peroxides. Despite the potential utility of these enzymes as biocatalysts, such applications have not been fully explored. In addition, the vast majority of DMSO reductase enzymes still remain uncharacterized. In this review, we describe the reactivities, proposed mechanisms, and potential synthetic applications of selected enzymes in the DMSO reductase superfamily. We also highlight emerging opportunities to discover new chemical activity and current challenges in studying and engineering proteins in the DMSO reductase superfamily.

Deep-mantle krypton reveals Earth's early accretion of carbonaceous matter.

Establishing when, and from where, carbon, nitrogen and water were delivered to Earth is a fundamental objective in understanding the origin of habitable planets such as Earth. Yet, volatile delivery to Earth remains controversial1-5. Krypton isotopes provide insights on volatile delivery owing to their substantial isotopic variations among sources6-10, although pervasive atmospheric contamination has hampered analytical efforts. Here we present the full suite of krypton isotopes from the deep mantle of the Galápagos and Iceland plumes, which have the most primitive helium, neon and tungsten isotopic compositions11-16. Except for 86Kr, the krypton isotopic compositions are similar to a mixture of chondritic and atmospheric krypton. These results suggest early accretion of carbonaceous material by proto-Earth and rule out any combination of hydrodynamic loss with outgassing of the deep or shallow mantle to explain atmospheric noble gases. Unexpectedly, the deep-mantle sources have a deficit in the neutron-rich 86Kr relative to the average composition of carbonaceous meteorites, which suggests a nucleosynthetic anomaly. Although the relative depletion of neutron-rich isotopes on Earth compared with carbonaceous meteorites has been documented for a range of refractory elements1,17,18, our observations suggest such a depletion for a volatile element. This finding indicates that accretion of volatile and refractory elements occurred simultaneously, with krypton recording concomitant accretion of non-solar volatiles from more than one type of material, possibly including outer Solar System planetesimals.

Preparation of cyclohexene isotopologues and stereoisotopomers from benzene.

The hydrogen isotopes deuterium (D) and tritium (T) have become essential tools in chemistry, biology and medicine1. Beyond their widespread use in spectroscopy, mass spectrometry and mechanistic and pharmacokinetic studies, there has been considerable interest in incorporating deuterium into drug molecules1. Deutetrabenazine, a deuterated drug that is promising for the treatment of Huntington's disease2, was recently approved by the United States' Food and Drug Administration. The deuterium kinetic isotope effect, which compares the rate of a chemical reaction for a compound with that for its deuterated counterpart, can be substantial1,3,4. The strategic replacement of hydrogen with deuterium can affect both the rate of metabolism and the distribution of metabolites for a compound5, improving the efficacy and safety of a drug. The pharmacokinetics of a deuterated compound depends on the location(s) of deuterium. Although methods are available for deuterium incorporation at both early and late stages of the synthesis of a drug6,7, these processes are often unselective and the stereoisotopic purity can be difficult to measure7,8. Here we describe the preparation of stereoselectively deuterated building blocks for pharmaceutical research. As a proof of concept, we demonstrate a four-step conversion of benzene to cyclohexene with varying degrees of deuterium incorporation, via binding to a tungsten complex. Using different combinations of deuterated and proteated acid and hydride reagents, the deuterated positions on the cyclohexene ring can be controlled precisely. In total, 52 unique stereoisotopomers of cyclohexene are available, in the form of ten different isotopologues. This concept can be extended to prepare discrete stereoisotopomers of functionalized cyclohexenes. Such systematic methods for the preparation of pharmacologically active compounds as discrete stereoisotopomers could improve the pharmacological and toxicological properties of drugs and provide mechanistic information related to their distribution and metabolism in the body.

Long-term core-mantle interaction explains W-He isotope heterogeneities.

The isotopic characteristics of ocean island basalts have long been used to infer the nature of their source and the long-term evolution of the Earth's mantle. Anticorrelation between tungsten and helium isotopic signatures is a particularly puzzling feature in those basalts, which no single process appears to explain. Traditionally, the high 3He/4He signature has been attributed to an undegassed reservoir in the deep mantle. Additional processes needed to obtain low 182W/184W often entail unobserved ancillary geochemical effects. It has been suggested, however, that the core feeds the lower mantle with primordial helium, obviating the need for an undegassed mantle reservoir. Independently, the tungsten-rich core has been suggested to impart the plume source with anomalous tungsten isotope signatures. We advance the idea that isotopic diffusion may simultaneously transport both tungsten and helium across the core-mantle boundary, with the striking implication that diffusion can naturally account for the observed isotopic trend. By modeling the long-term isotopic evolution of mantle domains, we demonstrate that this mechanism can account for more than sufficient isotopic ratios in plume-source material, which, after dynamical transport to the Earth's surface, are consistent with the present-day mantle W-He isotopic heterogeneities. No undegassed mantle reservoir is required, bearing significance on early Earth conditions such as the extent of magma oceans.

Multifunctional Supramolecular Hydrogel Modulated Heterojunction Interface Carrier Transport Engineering Facilitates Sensitive Photoelectrochemical Immunosensing.

Highly responsive interface of semiconductor nanophotoelectrochemical materials provides a broad development prospect for the identification of low-abundance cancer marker molecules. This work innovatively proposes an efficient blank WO3/SnIn4S8 heterojunction interface formed by self-assembly on the working electrode for interface regulation and photoregulation. Different from the traditional biomolecular layered interface, a hydrogel layer containing manganese dioxide with a wide light absorption range is formed at the interface after an accurate response to external immune recognition. The formation of the hydrogel layer hinders the effective contact between the heterojunction interface and the electrolyte solution, and manganese dioxide in the hydrogel layer forms a strong competition between the light source and the substrate photoelectric material. The process effectively improves the carrier recombination efficiency at the interface, reduces the interface reaction kinetics and photoelectric conversion efficiency, and thus provides strong support for target identification. Taking advantage of the process, the resulting biosensors are being explored for sensitive detection of human epidermal growth factor receptor 2, with a limit of detection as low as 0.037 pg/mL. Also, this study contributes to the advancement of photoelectrochemical biosensing technology and opens up new avenues for the development of sensitive and accurate analytical tools in the field of bioanalysis.

Defect Engineering of Bi2WO6 for Enhanced Photocatalytic Degradation of Antibiotic Pollutants.

Infiltration of excessive antibiotics into aquatic ecosystems plays a significant role in antibiotic resistance, a major global health challenge. It is therefore critical to develop effective technologies for their removal. Herein, defect-rich Bi2WO6 nanoparticles are solvothermally prepared via epitaxial growth on pristine Bi2WO6 seed nanocrystals, and the efficiency of the photocatalytic degradation of ciprofloxacin, a common antibiotic, is found to increase markedly from 62.51% to 98.27% under visible photoirradiation for 60 min. This is due to the formation of a large number of structural defects, where the synergistic interactions between grain boundaries and adjacent dislocations and oxygen vacancies lead to an improved separation and migration efficiency of photogenerated carriers and facilitate the adsorption and degradation of ciprofloxacin, as confirmed in experimental and theoretical studies. Results from this work demonstrate the unique potential of defect engineering for enhanced photocatalytic performance, a critical step in removing antibiotic contaminants in aquatic ecosystems.

Multifunctional integration of tungsten oxide (WO3) coating: A versatile approach for enhanced performance of antibiotics against single mixed bacterial infections.

Nanomaterials containing tungsten (TNMs), characterized by diverse nanostructures had been extensively used in biomedical sector. Despite numerous reports focusing on TNM applications in specific biomedical areas, there is a noticeable absence of comprehensive studies that focused on detailed characterization of nanomaterials along with their biological applications. The present work described the structural, morphological, and antimicrobial properties of tungsten oxide (WO3) nanoparticles coated by antibiotics (nanobiotics), and their application on single and mixed bacterial culture. The nanobiotics included in this study were WO3 coated with ampicillin (W+A), WO3 coated with penicillin (P+W), and WO3 coated with ciprofloxacin (C+W). Techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray spectroscopy (EDX), Fourier transforms infrared spectroscopy (FTIR), Rrman spectroscopy, and UV-visible spectroscopy were used to characterize synthesized nanoparticles. The minimum inhibitory concentration of C+W nanobiotic against S. aureus, E. coli, and mixed culture (S. aureus +E. coli) was lower than that of P+W and A+W. The impact of incubation period showed significant differences for each of nanobiotic against S. aureus, E. coli, and mixed culture. However, there were also non-significant differences among incubation periods for antibacterial activity of nanobiotics. It was pertinent to note that percentage variation in susceptibility of S. aureus with respect to mixed culture remained higher as compared to E. coli, indicating it stronger candidate imposing resistance. This paper thus suggested the strategy of coating of antibiotics with with WO3 nanoparticles as an ideal combination for resistance modulation against single and mixed culture bacteria.

Image-Guided Deployment and Monitoring of a Novel Tungsten Nanoparticle-Infused Radiopaque Absorbable Inferior Vena Cava Filter in a Swine Model.

PURPOSE: To improve radiopacity of radiolucent absorbable poly-p-dioxanone (PPDO) inferior vena cava filters (IVCFs) and demostrate their effectiveness in clot-trapping ability. MATERIALS AND METHODS: Tungsten nanoparticles (WNPs) were incorporated along with polyhydroxybutyrate (PHB), polycaprolactone (PCL), and polyvinylpyrrolidone (PVP) polymers to increase the surface adsorption of WNPs. The physicochemical and in vitro and in vivo imaging properties of PPDO IVCFs with WNPs with single-polymer PHB (W-P) were compared with those of WNPs with polymer blends consisting of PHB, PCL, and PVP (W-PB). RESULTS: In vitro analyses using PPDO sutures showed enhanced radiopacity with either W-P or W-PB coating, without compromising the inherent physicomechanical properties of the PPDO sutures. W-P- and W-PB-coated IVCFs were deployed successfully into the inferior vena cava of pig models with monitoring by fluoroscopy. At the time of deployment, W-PB-coated IVCFs showed a 2-fold increase in radiopacity compared to W-P-coated IVCFs. Longitudinal monitoring of in vivo IVCFs over a 12-week period showed a drastic decrease in radiopacity at Week 3 for both filters. CONCLUSIONS: The results highlight the utility of nanoparticles (NPs) and polymers for enhancing radiopacity of medical devices. Different methods of incorporating NPs and polymers can still be explored to improve the effectiveness, safety, and quality of absorbable IVCFs.

Neuromorphic learning and recognition in WO3-xthin film-based forming-free flexible electronic synapses.

In pursuing advanced neuromorphic applications, this study introduces the successful engineering of a flexible electronic synapse based on WO3-x, structured as W/WO3-x/Pt/Muscovite-Mica. This artificial synapse is designed to emulate crucial learning behaviors fundamental to in-memory computing. We systematically explore synaptic plasticity dynamics by implementing pulse measurements capturing potentiation and depression traits akin to biological synapses under flat and different bending conditions, thereby highlighting its potential suitability for flexible electronic applications. The findings demonstrate that the memristor accurately replicates essential properties of biological synapses, including short-term plasticity (STP), long-term plasticity (LTP), and the intriguing transition from STP to LTP. Furthermore, other variables are investigated, such as paired-pulse facilitation, spike rate-dependent plasticity, spike time-dependent plasticity, pulse duration-dependent plasticity, and pulse amplitude-dependent plasticity. Utilizing data from flat and differently bent synapses, neural network simulations for pattern recognition tasks using the Modified National Institute of Standards and Technology dataset reveal a high recognition accuracy of ∼95% with a fast learning speed that requires only 15 epochs to reach saturation.

Simultaneous immobilization of sediment internal phosphorus, arsenic and tungsten by lanthanum carbonate capping.

In this study, lanthanum carbonate (LC) was selected as a capping agent to examine its effectiveness in immobilizing sediment internal phosphorus (P), arsenic (As) and tungsten (W). With a 180-day incubation experiment, it was determined that LC capping efficiently reduced the concentrations of soluble reactive P (SRP), soluble As and soluble W in pore water, with the highest reduction rate of 83.39%, 56.21% and 68.52%, respectively. The primary mechanisms involved in the adsorption of P, As and W by LC were precipitation reactions and ligand exchange. Additionally, P, As and W were immobilized by LC capping through the transformation of fractions from mobile and less stable forms to more stable forms. Furthermore, LC capping led to an increase in the Eh value, which promoted the oxidation of soluble Fe (Ⅱ) and soluble Mn. The significantly positive correlation and synchronized variations observed between SRP, soluble As, soluble W, and soluble Fe (II) indicated that the effects of LC on Fe redox played a crucial role in immobilizing sediment internal P, As and W. However, the oxidation of Mn, promoted by LC, played a more significant role in immobilizing sediment internal As than P and W. These effects resulted in LC capping achieving the highest reduction of SRP, soluble As and soluble W flux at 145.22, 22.19, and 0.58 µg m-2d-1. It is of note that LC capping did not lead to an elevated release hazard of Co, Ni, Cu, and Pb, barring Cd. Besides, LC capping did not modify the entire microbial communities in the sediment, but altered the proportional representation of specific microorganisms. Generally, LC has potential as a capping agent capable of simultaneously immobilizing sediment internal P, As and W.

Advancing nanoarchitectures of 2D WO3/MXene photoanode for enhanced photoelectrocatalytic oxidation of phenol and arsenic in synthetic wastewater.

The photoelectrocatalytic advanced oxidation process (PEAOP) necessitates high-performing and stable photoanodes for the effective oxidation of complex pollutants in industrial wastewater. This study presents the construction of 2D WO3/MXene heteronanostructures for the development of efficient and stable photoanode. The WO3/MXene heterostructure features well-ordered WO3 photoactive sites anchored on micron-sized MXene sheets, providing an increased visible light active catalytic surface area and enhanced electrocatalytic activities for pollutant oxidation. Phenol, a highly toxic compound, was completely oxidized at an applied potential of 0.8 V vs. RHE under visible light irradiation. Systematic optimization of operational conditions for the photoelectrocatalytic oxidation of phenol was conducted. The phenol oxidation mechanism was elucidated via high-performance liquid chromatography (HPLC) analysis and the identification of intermediate compounds. Additionally, a mixed model of phenol and arsenic (III) in polluted water demonstrated the capability of WO3/MXene photoanode for the simultaneous oxidation of both organic and inorganic pollutants, achieving complete conversion of phenol and As(III) to non-toxic As(V). The WO3/MXene photoanode facilitated water oxidation, generating a substantial amount of O2•- and •OH oxidative species, which are crucial for the concurrent oxidation of phenol and arsenic. Recyclability tests demonstrated a 99% retention of performance, confirming the WO3/MXene photoanode's suitability for long-term operation in PEAOPs. The findings suggest that integrating WO3/MXene photoanodes into water purification systems can enhance economic feasibility, reduce energy consumption, and improve efficiency. This PEAOP offers a viable solution to the critical issue of heavy metal and organic chemical pollution in various water bodies, given its scalability and ability to preserve ecosystems while conserving clean water resources.

Associations between metals and metabolomic profiles related to diabetes among adults in a rural region.

INTRODUCTION: Exposure to metals is associated with increased risk of type 2 diabetes (T2D). Potential mechanisms for metals-T2D associations involve biological processes including oxidative stress and disruption of insulin-regulated glucose uptake. In this study, we assessed whether associations between metal exposure and metabolite profiles relate to biological pathways linked to T2D. MATERIALS AND METHODS: We used data from 29 adults rural Colorado residents enrolled in the San Luis Valley Diabetes Study. Urinary concentrations of arsenic, cadmium, cobalt, lead, manganese, and tungsten were measured. Metabolic effects were evaluated using untargeted metabolic profiling, which included 61,851 metabolite signals detected in serum. We evaluated cross-sectional associations between metals and metabolites present in at least 50% of samples. Primary analyses adjusted urinary heavy metal concentrations for creatinine. Metabolite outcomes associated with each metal exposure were evaluated using pathway enrichment to investigate potential mechanisms underlying the relationship between metals and T2D. RESULTS: Participants had a mean age of 58.5 years (standard deviation = 9.2), 48.3% were female, 48.3% identified as Hispanic/Latino, 13.8% were current smokers, and 65.5% had T2D. Of the detected metabolites, 455 were associated with at least one metal, including 42 associated with arsenic, 22 with cadmium, 10 with cobalt, 313 with lead, 66 with manganese, and two with tungsten. The metabolic features were linked to 24 pathways including linoleate metabolism, butanoate metabolism, and arginine and proline metabolism. Several of these pathways have been previously associated with T2D, and our results were similar when including only participants with T2D. CONCLUSIONS: Our results support the hypothesis that metals exposure may be associated with biological processes related to T2D, including amino acid, co-enzyme, and sugar and fatty acid metabolism. Insight into biological pathways could influence interventions to prevent adverse health outcomes due to metal exposure.

Unraveling the synergism mechanistic insight of O-vacancy and interfacial charge transfer in WO3-x decorated on Ag2CO3/BiOBr for photocatalysis of water pollutants: Based on experimental and density functional theory (DFT) studies.

Photocatalysis has been widely used as one of the most promising approaches to remove various pollutants in liquid or gas phases during the last decade. The main emphasis of the study is on the synergy of vacancy engineering and heterojunction formation, two widely used modifying approaches, to significantly alter photocatalytic performance. The vacancy-induced Ag2CO3/BiOBr/WO3-x heterojunction system has been fabricated using a co-precipitation technique to efficiently abate methylene blue (MB) dye and doxycycline (DC) antibiotic. The as-fabricated Ag2CO3/BiOBr/WO3-x heterojunction system displayed improved optoelectronic characteristic features because of the rational combination of dual charge transferal route and defect modulation. The Ag2CO3/BiOBr/WO3-x system possessed 97% and 74% photodegradation efficacy for MB and DC, respectively, with better charge isolation and migration efficacy. The ternary photocatalyst possessed a multi-fold increase in the reaction rate for both MB and DC, i.e., 0.021 and 0.0078 min-1, respectively, compared to pristine counterparts. Additionally, more insightful deductions about the photodegradation routes were made possible by the structural investigations of MB and DC using density functional theory (DFT) simulations. This study advances the understanding of the mechanisms forming visible light active dual Z-scheme heterojunction for effective environmental remediation.

Novel pyrochlore type europium stannate - tungsten disulfide heterostructure for light driven carbon dioxide reduction and nitrogen fixation.

The reduction of carbon dioxide (CO2) and nitrogen (N2) to value-added products is a substantial area of research in the fields of sustainable chemistry and renewable energy that aims at reducing greenhouse gas emissions and the production of alternative fuels and chemicals. The current work deals with the synthesis of pyrochlore-type europium stannate (Eu2Sn2O7: EuSnO), tungsten disulfide (WS2:WS), and novel EuSnO/WS heterostructure by a simple and facile co-precipitation-aided hydrothermal method. Using different methods, the morphological and structural analyses of the prepared samples were characterized. It was confirmed that a heterostructure was formed between the cubic EuSnO and the layered WS. Synthesized materials were used for photocatalytic CO2 and N2 reduction under UV and visible light. The amount of CO and CH4 evolved due to CO2 reduction is high in EuSnO/WS (CO = 104, CH4 = 64 µmol h-1 g-1) compared to pure EuSnO (CO = 36, CH4 = 70 µmol h-1 g-1) and WS (CO = 22, CH4 = 1.8 µmol h-1 g-1) under visible light. The same trend was observed even in the N2 fixation reaction under visible light, and the amount of NH4+ produced was found to be 13, 26, and 41 µmol h-1 g-1 in the presence of WS, EuSnO and EuSnO/WS, respectively. Enhanced light-driven activity towards CO2 and N2 reduction reactions in EuSnO/WS is due to the efficient charge separation through the formation of type-II heterostructure, which is in part associated with photocurrent response, photoluminescence, and electrochemical impedence spectroscopic (EIS) results. The EuSnO/WS heterostructure's exceptional stability and reusability may pique the attention of pyrochlore-based composite materials in photocatalytic energy and environmental applications.

DFT and experimental studies of the facet-dependent oxygen vacancies modulated WS2/BiOCl-OV S-scheme structure for enhanced photocatalytic removal of ciprofloxacin from wastewater.

The present study explores visible light-assisted photodegradation of ciprofloxacin hydrochloride (CIP) antibiotic as a promising solution to water pollution. The focus is on transforming the optical and electronic properties of BiOCl through the generation of oxygen vacancies (OVs) and the exposure of (110) facets, forming a robust S-scheme heterojunction with WS2. The resultant OVs mediated composite with an optimal ratio of WS2 and BiOCl-OV (4-WS2/BiOCl-OV) demonstrated remarkable efficiency (94.3%) in the visible light-assisted photodegradation of CIP antibiotic within 1.5 h. The CIP degradation using 4-WS2/BiOCl-OV followed pseudo-first-order kinetics with the rate constant of 0.023 min-1, outperforming bare WS2, BiOCl, and BiOCl-OV by 8, 6, and 4 times, respectively. Density functional theory (DFT) analysis aligned well with experimental results, providing insights into the structural arrangement and bandgap analysis of the photocatalysts. Liquid chromatography-mass spectrometry (LC-MS) analysis utilized for identifying potentially degraded products while scavenging experiments and electron paramagnetic resonance (EPR) spin trapping analysis elucidated the S-scheme charge transfer mechanism. This research contributes to advancing the design of oxygen vacancy-mediated S-scheme systems in the realm of photocatalysis, with potential implications for addressing water pollution concerns.

Exposure to tungsten particles via inhalation triggers early toxicity marker expression in the rat brain.

OBJECTIVE: Our work is focused on tungsten, considered as an emerging contaminant. Its environmental dispersion is partly due to mining and military activities. Exposure scenario can also be occupational, in areas such as the hard metal industry and specific nuclear facilities. Our study investigated the cerebral effects induced by the inhalation of tungsten particles. METHODS: Inhalation exposure campaigns were carried out at two different concentrations (5 and 80 mg/m3) in single and repeated modes (4 consecutive days) in adult rats within a nose-only inhalation chamber. Processes involved in brain toxicity were investigated 24 h after exposure. RESULTS AND DISCUSSION: Site-specific effects in terms of neuroanatomy and concentration-dependent changes in specific cellular actors were observed. Results obtained in the olfactory bulb suggest a potential early effect on the survival of microglial cells. Depending on the mode of exposure, these cells showed a decrease in density accompanied by an increase in an apoptotic marker. An abnormal phenotype of the nuclei of mature neurons, suggesting neuronal suffering, was also observed in the frontal cortex, and can be linked to the involvement of oxidative stress. The differential effects observed according to exposure patterns could involve two components: local (brain-specific) and/or systemic. Indeed, tungsten, in addition to being found in the lungs and kidneys, was present in the brain of animals exposed to the high concentration. CONCLUSION: Our data question the perceived innocuity of tungsten relative to other metals and raise hypotheses regarding possible adaptive or neurotoxic mechanisms that could ultimately alter neuronal integrity.

Tungsten enzymes play a role in detoxifying food and antimicrobial aldehydes in the human gut microbiome.

Tungsten (W) is a metal that is generally thought to be seldom used in biology. We show here that a W-containing oxidoreductase (WOR) family is diverse and widespread in the microbial world. Surprisingly, WORs, along with the tungstate-specific transporter Tup, are abundant in the human gut microbiome, which contains 24 phylogenetically distinct WOR types. Two model gut microbes containing six types of WOR and Tup were shown to assimilate W. Two of the WORs were natively purified and found to contain W. The enzymes catalyzed the conversion of toxic aldehydes to the corresponding acid, with one WOR carrying out an electron bifurcation reaction coupling aldehyde oxidation to the simultaneous reduction of NAD+ and of the redox protein ferredoxin. Such aldehydes are present in cooked foods and are produced as antimicrobials by gut microbiome metabolism. This aldehyde detoxification strategy is dependent on the availability of W to the microbe. The functions of other WORs in the gut microbiome that do not oxidize aldehydes remain unknown. W is generally beyond detection (<6 parts per billion) in common foods and at picomolar concentrations in drinking water, suggesting that W availability could limit some gut microbial functions and might be an overlooked micronutrient.

Structural, photoluminescence, and optical characteristics of a Sm3+ -doped lead borate-strontium-tungsten glass system: Evaluation of Judd-Ofelt intensity parameters and radiative properties.

In this study, the melt quenching approach is used to synthesize a lead borate-strontium-based glass system doped with samarium ions. Modifications in the glass network structure arising from the addition of various concentrations of Sm3+ ions were investigated via Fourier transform infrared (FTIR) spectroscopy. FTIR analysis revealed B-O-B bridges, BO3 , and BO4 units are present. UV-vis-NIR spectroscopic measurement was performed to study the optical absorption spectra. Optical constants such as optical bandgap energies, refractive indices, and other related parameters were evaluated. The lifetime fluorescence decay was measured and ranged between 1.04 and 1.88 ns. The photoluminescence spectra in the range 500-750 nm revealed four transitions from the ground state 6 G5/2 to the excited states 6 H5/2 , 6 H7/2 , 6 H9/2 and 6 H11/2 and J-O theory was utilized to study these optical transitions for Sm3+ ions. Calculations of the oscillator strengths and J-O intensity parameters were performed and the obtained J-O parameters followed the sequence Ω4 > Ω6 > Ω2 . The ratio O/R indicated a high lattice asymmetry around the samarium ions. The values of lifetimes and branching ratios for the fabricated samples emphasized their suitability to be used in laser applications. The current glass samples are good candidates for orange and red emission devices.

Unusual hard metal lung disease: bronchiolocentric interstitial pneumonia.

A 38-year-old woman experienced a persistent dry cough and progressively worsening dyspnoea for 2 years. Spirometry testing revealed a moderate-to-severe restrictive abnormality. High-resolution chest computed tomography showed diffuse reticulonodular opacities. A lung biopsy disclosed alveolar parenchymal inflammation and fibrosis with bronchiolocentric features, prompting consideration of interstitial pneumonia. Following a thorough investigation of her occupational history and an on-site inspection, it was discovered that the patient had been grinding drill bits designed for printed circuit boards for 8 years, exposing her to hard metals. Mineralogical analyses confirmed excessive tungsten in urine, serum and hair, leading to a diagnosis of hard metal lung disease due to tungsten carbide-cobalt exposure. After discontinuing exposure and commencing corticosteroid therapy, her symptoms, pulmonary function and imaging showed modest improvement. This case highlights the significance of assessing occupational history in patients with interstitial pneumonia and understanding industrial hazards for accurate diagnosis and care.

A clinical solution for non-toxic 3D-printed photon blocks in external beam radiation therapy.

PURPOSE: A well-known limitation of multi-leaf collimators is that they cannot easily form island blocks. This can be important in mantle region therapy. Cerrobend photon blocks, currently used for supplementary shielding, are labor-intensive and error-prone. To address this, an innovative, non-toxic, automatically manufactured photon block using 3D-printing technology is proposed, offering a patient-specific and accurate alternative. METHODS AND MATERIALS: The study investigates the development of patient-specific photon shielding blocks using 3D-printing for three different patient cases. A 3D-printed photon block shell filled with tungsten ball bearings (BBs) was designed to have similar dosimetric properties to Cerrobend standards. The generation of the blocks was automated using the Eclipse Scripting API and Python. Quality assurance was performed by comparing the expected and actual weight of the tungsten BBs used for shielding. Dosimetric and field geometry comparisons were conducted between 3D-printed and Cerrobend blocks, utilizing ionization chambers, imaging, and field geometry analysis. RESULTS: The quality assurance assessment revealed a -1.3% average difference in the mass of tungsten ball bearings for different patients. Relative dose output measurements for three patient-specific blocks in the blocked region agreed within 2% of each other. Against the Treatment Planning System (TPS), both 3D-printed and Cerrobend blocks agreed within 2%. For each patient, 6 MV image profiles taken through the 3D-printed and Cerrobend blocks agreed within 1% outside high gradient regions. Jaccard distance analysis of the MV images against the TPS planned images, found Cerrobend blocks to have 15.7% dissimilarity to the TPS, while that of the 3D-printed blocks was 6.7%. CONCLUSIONS: This study validates a novel, efficient 3D-printing method for photon block creation in clinical settings. Despite potential limitations, the benefits include reduced manual labor, automated processes, and greater precision. It holds potential for widespread adoption in radiation therapy, furthering non-toxic radiation shielding.