ABSTRACT
Ensuring safe water supply for communities across the United States is a growing challenge in the face of aging infrastructure, impaired source water, and strained community finances. In the aftermath of the Flint lead crisis, there is an urgent need to assess the current state of US drinking water. However, no nationwide assessment has yet been conducted on trends in drinking water quality violations across several decades. Efforts to reduce violations are of national concern given that, in 2015, nearly 21 million people relied on community water systems that violated health-based quality standards. In this paper, we evaluate spatial and temporal patterns in health-related violations of the Safe Drinking Water Act using a panel dataset of 17,900 community water systems over the period 1982-2015. We also identify vulnerability factors of communities and water systems through probit regression. Increasing time trends and violation hot spots are detected in several states, particularly in the Southwest region. Repeat violations are prevalent in locations of violation hot spots, indicating that water systems in these regions struggle with recurring issues. In terms of vulnerability factors, we find that violation incidence in rural areas is substantially higher than in urbanized areas. Meanwhile, private ownership and purchased water source are associated with compliance. These findings indicate the types of underperforming systems that might benefit from assistance in achieving consistent compliance. We discuss why certain violations might be clustered in some regions and strategies for improving national drinking water quality.
Subject(s)
Water Pollutants/standards , Water Quality/standards , Water Supply/legislation & jurisprudence , Water Supply/standards , Drinking Water , Humans , Safety , United StatesABSTRACT
Relationships between biological and enrichment indicators were explored to demarcate hallmarks of enrichment that can be used in managing eutrophication in large rivers. Biological indicators were sensitive to the measured range of enrichment and generally showed linear responses. However, fish biotic integrity scores, 24-h ranges in dissolved oxygen, and biological oxygen demand all showed strong nonlinear responses coinciding with sestonic chlorophyll concentrations in the range of 20-50 µg/l. Hallmarks of overt overenrichment were defined as sestonic chlorophyll ≥ 100 µg/l, 5-day biological oxygen demand ≥ 6.0 mg/l, and 24-h range in dissolved oxygen ≥ 9.0 mg/l. Acceptable levels were defined as chlorophyll < 30 µg/l, 5-day biological oxygen demand < 2.5 mg/l, and 24-h dissolved oxygen range < 7.0 mg/l. Relationships between nutrient concentrations and sestonic chlorophyll were weak, mainly due to high ambient levels of nutrients. However, total phosphorus concentrations averaged lower at sites showing less overt signs of enrichment, suggesting 130 µg/l total phosphorus as a management target for presently overenriched waters.
Subject(s)
Environmental Monitoring , Eutrophication , Rivers/chemistry , Water Pollutants/analysis , Animals , Chlorophyll/analysis , Fishes , Nitrogen/analysis , Ohio , Oxygen/analysis , Phosphorus/analysis , Water Pollutants/standardsABSTRACT
Regional water safety systems are affected by social, economic, ecological, hydrological and other factors, and their effects are complicated and variable. Studying water safety systems is crucial to promoting the coordinated development of regional water safety systems and anthropogenic processes. Thus, a similarity cloud model is developed to simulate the evolution mechanisms of fuzzy and complex regional systems of water security and overcome the uncertainty that is associated with the indices that are used in water safety index systems. This cloud generator is used to reciprocally transform a qualitative cloud image with a quantitative cloud characteristic value, and the stochastic weight assignment method is used to determine the weight of the evaluation indices. The results of case studies show that Jiansanjiang's water safety systems were in a safe state in 2002-2011, but the water safety systems in the arid area of Yinchuan City were in a dangerous state in 2006-2007 because of climate factors and a lack of effective water and soil resource protection. The experimental results are consistent with the research subjects' actual situations, and the proposed model provides a tool for decision makers to better understand the security issues that are associated with regional water safety systems.
Subject(s)
Models, Theoretical , Water Supply/standards , Water/chemistry , Conservation of Natural Resources , Soil , Stochastic Processes , Water Pollutants/standardsABSTRACT
Human activities during recent decades have led to increased degradation of the river water environment in South Asia. This degradation has led to concerns for the populations of the major cities of Nepal, including those of the Kathmandu Valley. The deterioration of the rivers in the valley is directly linked to the prevalence of poor sanitary conditions, as well as the presence of industries that discharge their effluents into the river. This study aims to investigate the water quality aspect for the aquatic ecosystems and recreation of the major rivers in the Kathmandu Valley using the Canadian Council of Ministers of the Environment water quality index (CCME WQI). Ten physicochemical parameters were used to determine the CCME WQI at 20 different sampling locations. Analysis of the data indicated that the water quality in rural areas ranges from excellent to good, whereas in denser settlements and core urban areas, the water quality is poor. The study results are expected to provide policy-makers with valuable information related to the use of river water by local people in the study area.
Subject(s)
Environmental Monitoring/methods , Models, Theoretical , Water Pollution/statistics & numerical data , Asia , Canada , Cities , Ecosystem , Humans , Nepal , Recreation , Rivers/chemistry , Water Pollutants/analysis , Water Pollutants/standards , Water Quality/standardsABSTRACT
The failure to provide safe drinking water services to all people is the greatest development setback of the twenty-first century including Ethiopia. Potential pollutants from various sources are deteriorating drinking water quality in different seasons, and associated health risks were not clearly known. We determined seasonal and spatial variations of urban drinking water characteristics and associated health risks in Agaro, Jimma, and Metu towns, Southwest Ethiopia. Seventy-two samples were collected during dry and rainy seasons of 2014 and 2015. The majority (87.4%) of physicochemical parameters was found within the recommended limits. However, free residual chlorine in Jimma and Agaro town water sources was lower than the recommended limit and negatively correlated with total and fecal coliform counts (r = - 0.585 and - 0.638). Statistically significant differences were observed at pH, turbidity, and total coliform between dry and rainy seasons (p < 0.05). A Kruskal-Wallis H test revealed a statistically significant difference in electrical conductivity, total hardness, fluoride, iron, and fecal coliform across the study towns (p < 0.05). The Agaro town water source was the highest in fluoride concentration (3.15 mg/l). The daily exposure level for high fluoride concentration in Agaro town was estimated between 0.19 and 0.41 mg/kg day, and the average cumulative hazard index of fluoride was > 3.13 for all age groups. Water quality variations were observed in all conventional water treatment systems in the rainy season, and further research should focus on its optimization to safeguard the public.
Subject(s)
Drinking Water/chemistry , Environmental Monitoring , Water Pollutants/analysis , Ethiopia , Fluorides , Humans , Phosphates , Rain , Risk , Seasons , Water Microbiology , Water Pollutants/standards , Water Purification , Water Quality , Water SupplyABSTRACT
A new method for the optimal design of groundwater quality monitoring networks is introduced in this paper. Various indicator parameters were considered simultaneously and tested for the Irapuato-Valle aquifer in Mexico. The steps followed in the design were (1) establishment of the monitoring network objectives, (2) definition of a groundwater quality conceptual model for the study area, (3) selection of the parameters to be sampled, and (4) selection of a monitoring network by choosing the well positions that minimize the estimate error variance of the selected indicator parameters. Equal weight for each parameter was given to most of the aquifer positions and a higher weight to priority zones. The objective for the monitoring network in the specific application was to obtain a general reconnaissance of the water quality, including water types, water origin, and first indications of contamination. Water quality indicator parameters were chosen in accordance with this objective, and for the selection of the optimal monitoring sites, it was sought to obtain a low-uncertainty estimate of these parameters for the entire aquifer and with more certainty in priority zones. The optimal monitoring network was selected using a combination of geostatistical methods, a Kalman filter and a heuristic optimization method. Results show that when monitoring the 69 locations with higher priority order (the optimal monitoring network), the joint average standard error in the study area for all the groundwater quality parameters was approximately 90 % of the obtained with the 140 available sampling locations (the set of pilot wells). This demonstrates that an optimal design can help to reduce monitoring costs, by avoiding redundancy in data acquisition.
Subject(s)
Environmental Monitoring/methods , Groundwater/chemistry , Water Pollutants/standards , Mexico , Uncertainty , Water QualityABSTRACT
The use of water quality indices (WQIs) as a tool to evaluate the status of water quality in rivers has been introduced since the 1960s. The WQI transforms selected water quality parameters into a dimensionless number so that changes in river water quality at any particular location and time could be presented in a simple and easily understandable manner. Although many WQIs have been developed, there is no worldwide accepted method for implementing the steps used for developing a WQI. Thus, there is a continuing interest to develop accurate WQIs that suit a local or regional area. This paper aimed to provide significant contribution to the development of future river WQIs through a review of 30 existing WQIs based on the four steps needed to develop a WQI. These steps are the selection of parameters, the generation of sub-indices, the generation of parameter weights and the aggregation process to compute the final index value. From the 30 reviewed WQIs, 7 were identified as most important based on their wider use and they were discussed in detail. It was observed that a major factor that influences wider use of a WQI is the support provided by the government and authorities to implement a WQI as the main tool to evaluate the status of rivers. Since there is a lot of subjectivity and uncertainty involved in the steps for developing and applying a WQI, it is recommended that the opinion of local water quality experts is taken, especially in the first three steps (through techniques like Delphi method). It was also observed that uncertainty and sensitivity analysis was rarely undertaken to reduce uncertainty, and hence such an analysis is recommended for future studies.
Subject(s)
Rivers/chemistry , Water Pollutants/standards , Water Pollution/statistics & numerical data , Water Quality/standards , Environmental Monitoring/methods , Fresh WaterABSTRACT
In aquatic ecosystems, the identification of ecological thresholds may be useful for managers as it can help to diagnose ecosystem health and to identify key levers to enable the success of preservation and restoration measures. A recent statistical method, gradient forest, based on random forests, was used to detect thresholds of phytoplankton community change in lakes along different environmental gradients. It performs exploratory analyses of multivariate biological and environmental data to estimate the location and importance of community thresholds along gradients. The method was applied to a data set of 224 French lakes which were characterized by 29 environmental variables and the mean abundances of 196 phytoplankton species. Results showed the high importance of geographic variables for the prediction of species abundances at the scale of the study. A second analysis was performed on a subset of lakes defined by geographic thresholds and presenting a higher biological homogeneity. Community thresholds were identified for the most important physico-chemical variables including water transparency, total phosphorus, ammonia, nitrates, and dissolved organic carbon. Gradient forest appeared as a powerful method at a first exploratory step, to detect ecological thresholds at large spatial scale. The thresholds that were identified here must be reinforced by the separate analysis of other aquatic communities and may be used then to set protective environmental standards after consideration of natural variability among lakes.
Subject(s)
Environmental Monitoring/methods , Phytoplankton/classification , Water Pollutants/standards , Ecology , Ecosystem , Environmental Monitoring/standards , Lakes/chemistry , Phosphorus/analysis , Phytoplankton/growth & development , Water Pollutants/analysisABSTRACT
A computer-aided multivariate water quality index is developed based on partial least squares (PLS) regression. The index is termed as the partial least squares water quality index (PLS-WQI). Briefly, a training set was computationally generated based on the guideline of National Water Quality Standards for Malaysia (NWQS) to predict the water quality. The index is benchmarked with the well-established index developed by the Department of Environment, Malaysia (DOE-WQI). The PLS-WQI is a continuous variable with the value closer to I indicating good water quality and closer to V indicating poor water quality. Unlike other conventional indexing methods, the algorithm calculates the index in a multivariate manner. The algorithm allows rapid processing of a large dataset without tedious calculation; it can be an efficient tool for spatial and temporal routine monitoring of water quality. Although the algorithm is designed based on the guideline of NWQS, it can be easily adapted to accommodate other guidelines. The algorithm was evaluated and demonstrated on the simulated and real datasets. Results indicate that the algorithm is robust and reliable. Based on six parameters, the overall ratings derived are inversely correlated to DOE-WQI. When the number of parameter is increased, the overall ratings appear to provide better insights into the water quality.
Subject(s)
Computer Simulation , Environmental Monitoring/methods , Water Pollutants/standards , Water Pollution/statistics & numerical data , Malaysia , Water Quality/standardsABSTRACT
In 2006, a phytoplankton index of biotic integrity (PIBI) was published for Chesapeake Bay Lacouture et al. (Estuaries 29(4):598-616, 2006). The PIBI was developed from data collected during the first 18 years (1985-2002) of the Chesapeake Bay Program long-term phytoplankton and water quality monitoring programs. Combinations of up to nine phytoplankton metrics were selected to characterize bay habitat health according to plankton community condition in spring and summer seasons across four salinity zones. The independent data available at the time for index validation was not sufficient to test the PIBI because they lacked critical index parameters (pheophytin and dissolved organic carbon) and reference samples for some seasons and salinity zones. An additional 8 years of monitoring data (2003-2010) are now available to validate the original index, reassess index performance and re-examine long-term trends in PIBI conditions in the Bay. The PIBI remains sensitive to changes in nutrient and light conditions. Evaluation of the PIBI results over the entire 1985-2010 time period shows no discernible trends in the overall health of Bay habitat based on phytoplankton community conditions. This lack of overall PIBI trend appears to be a combined response to declines in water clarity and improvements in dissolved inorganic nitrogen and dissolved phosphorus conditions in the bay.
Subject(s)
Bays/chemistry , Environmental Monitoring/methods , Phytoplankton/growth & development , Water Pollutants/analysis , Environmental Monitoring/standards , Estuaries , Maryland , Virginia , Water Pollutants/standards , Water Pollution/statistics & numerical dataSubject(s)
Caprylates , Drinking Water , Fluorocarbons , Water Pollutants , Water Pollution/legislation & jurisprudence , Water Pollution/prevention & control , Water Supply/legislation & jurisprudence , Water Supply/standards , Caprylates/adverse effects , Caprylates/standards , Caprylates/toxicity , Drinking Water/adverse effects , Drinking Water/standards , Federal Government , Fluorocarbons/adverse effects , Fluorocarbons/standards , Fluorocarbons/toxicity , Humans , State Government , United States , United States Environmental Protection Agency , Water Pollutants/adverse effects , Water Pollutants/standards , Water Pollutants/toxicityABSTRACT
Canada's National Agri-Environmental Standards Initiative sought to develop an environmental benchmark for low-level waterborne pathogen occurrence in agricultural watersheds. A field study collected 902 water samples from 27 sites in four intensive agricultural watersheds across Canada from 2005 to 2007. Four of the sites were selected as reference sites away from livestock and human fecal pollution sources in each watershed. Water samples were analyzed for Campylobacter spp., Salmonella spp., Escherichia coli O157:H7, Cryptosporidium spp., Giardia spp., and the water quality indicator E. coli. The annual mean number of pathogen species was higher at agricultural sites (1.54 ± 0.07 species per water sample) than at reference sites (0.75 ± 0.14 species per water sample). The annual mean concentration of E. coli was also higher at agricultural sites (491 ± 96 colony-forming units [cfu] 100 mL(-1)) than at reference sites (53 ± 18 cfu 100 mL(-1)). The feasibility of adopting existing E. coli water quality guideline values as an environmental benchmark was assessed, but waterborne pathogens were detected at agricultural sites in 80% of water samples with low E. coli concentrations (<100 cfu 100 mL(-1)). Instead, an approach was developed based on using the natural background occurrence of pathogens at reference sites in agricultural watersheds to derive provisional environmental benchmarks for pathogens at agricultural sites. The environmental benchmarks that were derived were found to represent E. coli values lower than geometric mean values typically found in recreational water quality guidelines. Additional research is needed to investigate environmental benchmarks for waterborne pathogens within the context of the "One World, One Health" perspective for protecting human, domestic animal, and wildlife health.
Subject(s)
Agriculture , Benchmarking , Escherichia coli/isolation & purification , Water Microbiology/standards , Water Movements , Water Pollutants/standards , Canada , Ecosystem , Water/parasitologyABSTRACT
INTRODUCTION: Water is recovered aboard the International Space Station (ISS) from humidity condensate and treated urine. The product water is monitored for total organic carbon (TOC). In 2010 the TOC readings indicated that a new contaminant had entered the potable water and was steadily increasing toward the TOC screening limit of 3 mg x L(-1). In a ground-based laboratory, chemists discovered that dimethylsilanediol (DMSD) was the principal new contaminant. As no standard existed for safe levels of DMSD in water, the Toxicology Office at Johnson Space Center was asked to set such a standard. METHODS: The Toxicology Office used methods developed over the past decade, in collaboration with the National Research Council Committee on Toxicology, for setting Spacecraft Water Exposure Guidelines (SWEGs). These methods require a thorough literature search and development of an acceptable concentration (AC) for each potential toxic effect, keeping in mind that the adverse effects that accompany spaceflight could increase toxicity for certain end points. Benchmark dose modeling was encouraged if sufficient data were available. The most sensitive AC becomes the driver for the SWEG. RESULTS: Hematotoxicity, hepatotoxicity, and possibly neurotoxicity were the most sensitive toxicological endpoints for DMSD. CONCLUSIONS: The SWEG for DMSD for 100 d of ingestion was set at 35 mg x L(-1), which is equivalent to 9 mg x L(-1) as TOC. This is well above the TOC SWEG of 3 mg x L(-1) and the peak DMSD level of processed water observed on orbit, which was 2.2 mg x L(-1) asTOC (8.5 mg x L(-10 of DMSD).
Subject(s)
Drinking Water/analysis , Ecological Systems, Closed , Organosilicon Compounds/toxicity , Space Flight , Water Pollutants/toxicity , Adult , Animals , Benchmarking , Drinking Water/standards , Female , Humans , Male , Maximum Allowable Concentration , Organosilicon Compounds/analysis , Organosilicon Compounds/standards , Rats , Rats, Sprague-Dawley , Water Pollutants/analysis , Water Pollutants/standardsABSTRACT
Sediment quality guidelines (SQGs) can be derived using different approaches and are commonly used in environmental management, reclamation, and risk assessment. The screening-level concentration (SLC) approach has been used in Ontario, Canada, to derive lowest effect levels (LELs) and severe effect levels for use as SQGs. This approach was adopted by the Canadian Nuclear Safety Commission (CNSC) to set guidelines for metals (As, Cr, Cu, Pb, Mo, Ni, Se, U, and V) and radionuclides (Ra-226, Pb-210, and Po-210) in sediment at northern Saskatchewan uranium mining and milling operations. The SLC approach is based on total metal and radionuclide concentrations in sediment, and corresponding benthic community composition data for a specific sampling site. In this study, sediment chemistry (total metals and radionuclides) and benthic community data from northern Saskatchewan uranium operations were compiled and examined. Results indicate that the CNSC-derived SQGs had limited relationships to observed effects, or lack thereof, on benthic invertebrate communities near uranium operations in Saskatchewan. The LELs were found to correctly align with effects at 95% of the sites that had effects, on a general basis, but on an element-specific basis many of the elements had concentrations at effect sites below their LELs. Furthermore, concentrations of the evaluated elements exceeded at least one LEL at 60% of the no-effect sites. The high number of exceedences of LELs at reference and no-effect sites (false-positives) calls to question the appropriateness of the CNSC-derived SQGs. It is suggested that alternatives to the SLC approach be explored.
Subject(s)
Geologic Sediments/chemistry , Mining/standards , Uranium/analysis , Water Pollutants/analysis , Water Quality/standards , Guidelines as Topic , Mining/methods , Saskatchewan , Water Pollutants/standardsABSTRACT
Beach monitoring programs aim to decrease swimming-related illnesses resulting from exposure to harmful microbes in recreational waters, while providing maximum beach access. Managers are advised by the U.S. EPA to estimate microbiological water quality based on a 5-day geometric mean of fecal indicator bacteria (FIB) concentrations or on a jurisdiction-specific single-sample maximum; however, most opt instead to apply a default single-sample maximum to ease application. We examined whether re-evaluation of the U.S. EPA ambient water quality criteria (AWQC) and the epidemiological studies on which they are based could increase public beach access without affecting presumed health risk. Single-sample maxima were calculated using historic monitoring data for 50 beaches along coastal Lake Michigan on various temporal and spatial groupings to assess flexibility in the application of the AWQC. No calculation on either scale was as low as the default maximum (235 CFU/100 mL) that managers typically use, indicating that current applications may be more conservative than the outlined AWQC. It was notable that beaches subject to point source FIB contamination had lower variation, highlighting the bias in the standards for these beaches. Until new water quality standards are promulgated, more site-specific application of the AWQC may benefit beach managers by allowing swimmers greater access to beaches. This issue will be an important consideration in addressing the forthcoming beach monitoring standards.
Subject(s)
Bathing Beaches/statistics & numerical data , Environmental Monitoring/methods , Bathing Beaches/legislation & jurisprudence , Bathing Beaches/standards , Environmental Monitoring/legislation & jurisprudence , Environmental Monitoring/standards , Humans , Legislation as Topic , Seawater/microbiology , Water Pollutants/analysis , Water Pollutants/standards , Water Pollution/analysis , Water Pollution/statistics & numerical data , Water Quality/standardsABSTRACT
The Gulf of Mexico Alliance (GOMA) was tasked by the five Gulf State Governors to identify major issues affecting the Gulf of Mexico (GoM) and to set priorities for ameliorating these problems. One priority identified by GOMA is the need to improve detection methods for water quality indicators, pathogens and microbial source tracking. The United States Environmental Protection Agency (USEPA) is tasked with revising water quality criteria by 2012; however, the locations traditionally studied by the USEPA are not representative of the GoM and this has raised concern about whether or not the new criteria will be appropriate. This paper outlines a number of concerns, including deadlines associated with the USEPA Consent Decree, which may prevent inclusion of research needed to produce a well-developed set of methods and criteria appropriate for all regulated waters. GOMA makes several recommendations including ensuring that criteria formulation use data that include GoM-specific conditions (e.g. lower bather density, nonpoint sources), that rapid-testing methods be feasible and adequately controlled, and that USEPA maintains investments in water quality research once the new criteria are promulgated in order to assure that outstanding scientific questions are addressed and that scientifically defensible criteria are achieved for the GoM and other regulated waterbodies.
Subject(s)
Environmental Monitoring/legislation & jurisprudence , United States Environmental Protection Agency/legislation & jurisprudence , Water Microbiology/standards , Water Pollutants/standards , Environmental Monitoring/standards , Gulf of Mexico , Organizations , United StatesABSTRACT
The purpose of this work was development and application of the purification system suitable for the treatment of groundwater used for human consumption, satisfying following criteria: (a) no need for external addition of the chemicals; (b) simultaneous removal of wide range of contaminants present in the treated water; (c) low sensitivity to the changes in the composition of the treated water; (d) high quality of treated water with regards to all measured parameters. Therefore the well water from the 60 m deep water layer situated near the city of Osijek (Eastern Croatia) with elevated values of heavy metals, color, turbidity, suspended solids, ammonia and organic contaminants was processed. Due to the complex composition of the treated water, the purification system required the combination of electroreduction/electrocoagulation, using iron and aluminum electrode plates followed by the simultaneous ozonation/UV treatment. The electroreduction/electrocoagulation approach was used for the removal of heavy metals, suspended solids, color and turbidity, while the organic contaminants and ammonia were removed by the ozonation/UV treatment. All measured parameters in the purified water were significantly lower compared to the regulated values. Under the optimum treatment conditions, the removal efficiencies for color, turbidity, nickel and arsenic were 100%. The removal efficiencies of V, Cr, Mn, Fe, Cu, Zn, Pb, ammonia, fluorides, sulfates and COD were 94.5%, 96.0%, 98.3%, 99.6%, 99.7%, 97.8%, 96.7%, 96,7%, 93.4%, 51.4%, 72.2% and 93.8%, respectively, increasing with the increased initial concentrations.
Subject(s)
Drinking Water/chemistry , Groundwater/chemistry , Water Pollutants/chemistry , Water Purification/methods , Arsenic/analysis , Arsenic/chemistry , Arsenic/standards , Biological Oxygen Demand Analysis , Color/standards , Drinking Water/analysis , Drinking Water/standards , Electrochemistry , Fluorides/analysis , Fluorides/chemistry , Fluorides/standards , Groundwater/analysis , Metals, Heavy/analysis , Metals, Heavy/chemistry , Metals, Heavy/standards , Nephelometry and Turbidimetry , Nitrogen Compounds/analysis , Nitrogen Compounds/chemistry , Nitrogen Compounds/standards , Oxidation-Reduction , Spectrometry, X-Ray Emission , Sulfates/analysis , Sulfates/chemistry , Sulfates/standards , Water Pollutants/analysis , Water Pollutants/standards , World Health OrganizationABSTRACT
Our study develops and demonstrates an objective method for selecting reference sites for the assessment of ecological condition in freshwater ecosystems. The method uses widely available GIS data to group potential sites based on their natural environments. It then establishes the degree and types of human activities each site is exposed to prior to scoring the sites in each group by the relative amount of human activity present. Finally, the sites in each group with the least amount of human activity are categorized as reference sites, with the boundary between reference and test sites defined to maximize the distinctiveness of the two categories with respect to human activity. Application of this technique for the purpose of identifying headwater reference basins in rural areas of southwestern Ontario resulted in the classification of basins into six natural groups based on the dominant texture of the surface geology. Development of a human activity gradient indicated that basins varied according to the amount of exposure to agricultural activities with most basins having at least moderate exposure. Establishment of the reference test boundary indicated that the selected reference basins exhibited substantively lower extents of agricultural activity than test sites for most groups. Because this method uses only widely available GIS data, it enables rapid and cost-effective identification of candidate reference sites, even for large, remote, and understudied regions.
Subject(s)
Decision Support Techniques , Environmental Monitoring/methods , Rivers/chemistry , Water Pollutants/analysis , Geographic Information Systems , Reference Standards , Water Pollutants/standards , Water Pollution/analysisABSTRACT
This study aims at the classification and water quality assessment of Harike wetland (Ramsar site) in India using satellite images from the Indian Remote Sensing satellite, Resourcesat (IRS P6). The Harike wetland is a converging zone of two rivers, Beas and Sutlej. The satellite images of IRS Linear Imaging Self Scanner (LISS) IV multispectral sensor with three bands (green, red, and near infrared (NIR)) and a spatial resolution of 5.8 m were classified using supervised image classification techniques. Field points for image classification and water sampling were recorded using a Garmin eTrex Global Positioning System. The water quality parameters assessed were dissolved oxygen, conductivity, pH, turbidity, total and suspended solids (SS), chemical oxygen demand, and Secchi disk transparency (SDT). Correlations were established between turbidity and SS, SS and SDT, and total solids and turbidity. Using reflectance values from the green, red, and NIR bands, we then plotted the water quality parameters with the mean digital number values from the satellite imagery. The NIR band correlated significantly with the water quality parameters, whereas, using SDT values, it was observed that the green and the red reflectance bands were able to distinguish the waters from the two rivers, which have different water qualities.
Subject(s)
Environmental Monitoring/methods , Fresh Water/chemistry , Remote Sensing Technology , Spacecraft , Water Pollutants/analysis , Biological Oxygen Demand Analysis , Hydrogen-Ion Concentration , India , Nitrogen/analysis , Oxygen/analysis , Potassium/analysis , Salinity , Sodium/analysis , Water Pollutants/standards , WetlandsABSTRACT
Submarine groundwater discharge (SGD), a major component of the hydrological cycle, has significant impacts on the sustainable development of the marine environment. This study aimed to examine the literature characteristics and research hotspots of SGD based on Web of Science's citation database from 1998-2019. With systematic bibliometric analysis, insights were made into multiple aspects including research output, subject categories, journals, countries/territories, institutions, authors, and hotspots and research trends. Results showed that the current amount of publications on SGD has increased exponentially. The characteristics of multi-subject, active international and inter-institutional collaborations were identified. There were 11 core journals publishing the research on SGD, and the number of covered journals increased linearly from 1998. USA had distinct advantages in publication outputs and took the core position in international collaborations. At present, the research hotspots of SGD mainly include the following: dynamics process and estimation of SGD with hydrogeological methods, tracer techniques, geochemical process in subterranean estuary, and dissolved material inputs to coastal waters via SGD. Citation analysis implied much development space in carbon flux transported by SGD and the implement of head as groundwater tracer. These results provided an instructive perspective of the present situation and future research direction on SGD.