Characterization of the promoter, downstream target genes and recognition DNA sequence of Mhy1, a key filamentation-promoting transcription factor in the dimorphic yeast Yarrowia lipolytica.

Msn2/Msn4-family zinc finger transcription factors play important roles in stress response in yeast. However, some members of this family show significant functional divergence in different species. Here, we report that in the dimorphic yeast Yarrowia lipolytica, the Msn2/Msn4-like protein Mhy1 is a key regulator of yeast-to-hypha dimorphic transition but not stress response. Both MHY1 deletion and overexpression affect filamentation. In contrast, YlMsn4, the other Msn2/Msn4-like protein, regulates tolerance to acid-induced stress. We show that MHY1 has an unusually long (about 3800 bp) promoter featuring an upstream located enhancer and a double stress response element (STRE) motif, the latter of which mediates Mhy1's regulation on its own transcription. Transcriptome profiling conducted in wild-type strain, mhy1Δ mutant and MHY1-overexpressing mutant revealed about 100 genes that are highly differentially expressed (≥ 5-fold) in each of the 2 mutants compared to the wild-type strain. The largest group of genes downregulated in mhy1Δ mutant encodes cell wall proteins or enzymes involved in cell wall organization, suggesting that Mhy1 may regulate dimorphic transition by controlling these cell wall genes. We confirmed that the genes YALI0C23452, YALI0C15268 and YALI0B09955 are directly regulated by Mhy1. We also characterized the Mhy1 consensus binding site as 5'-WNAGGGG-3' (W = A or T; N = A, T, G or C). These results provide new insight in the functions of Msn2/Msn4-family transcription factors in fungi and the mechanism by which Mhy1 regulates dimorphic transition.

Green pyomelanin-mediated synthesis of gold nanoparticles: modelling and design, physico-chemical and biological characteristics.

BACKGROUND: Synthesis of nanoparticles (NPs) and their incorporation in materials are amongst the most studied topics in chemistry, physics and material science. Gold NPs have applications in medicine due to their antibacterial and anticancer activities, in biomedical imaging and diagnostic test. Despite chemical synthesis of NPs are well characterized and controlled, they rely on the utilization of harsh chemical conditions and organic solvent and generate toxic residues. Therefore, greener and more sustainable alternative methods for NPs synthesis have been developed recently. These methods use microorganisms, mainly yeast or yeast cell extract. NPs synthesis with culture supernatants are most of the time the preferred method since it facilitates the purification scheme for the recovery of the NPs. Extraction of NPs, formed within the cells or cell-wall, is laborious, time-consuming and are not cost effective. The bioactivities of NPs, namely antimicrobial and anticancer, are known to be related to NPs shape, size and size distribution. RESULTS: Herein, we reported on the green synthesis of gold nanoparticles (AuNPs) mediated by pyomelanin purified from the yeast Yarrowia lipolytica. A three levels four factorial Box-Behnken Design (BBD) was used to evaluate the influence of temperature, pH, gold salt and pyomelanin concentration on the nanoparticle size distribution. Based on the BBD, a quadratic model was established and was applied to predict the experimental parameters that yield to AuNPs with specific size. The synthesized nanoparticles with median size value of 104 nm were of nanocrystalline structure, mostly polygonal or spherical. They exhibited a high colloidal stability with zeta potential of - 28.96 mV and a moderate polydispersity index of 0.267. The absence of cytotoxicity of the AuNPs was investigated on two mammalian cell lines, namely mouse fibroblasts (NIH3T3) and human osteosarcoma cells (U2OS). Cell viability was only reduced at AuNPs concentration higher than 160 µg/mL. Moreover, they did not affect on the cell morphology. CONCLUSION: Our results indicate that different process parameters affect significantly nanoparticles size however with the mathematical model it is possible to define the size of AuNPs. Moreover, this melanin-based gold nanoparticles showed neither cytotoxicity effect nor altered cell morphology.

Immobilization pattern of morphologically different microorganisms on bacterial cellulose membranes.

The aim of this study was to assess the immobilization pattern of microorganisms characterized by varying cell shapes and sizes (rod-shaped bacteria Lactobacillus delbruecki, spherical-shaped yeast Saccharomyces cerevisiae and hyphae forms of Yarrowia lipolytica) on bacterial cellulose of various material properties. The 'adsorption-incubation' method was used for the purposes of immobilization. The immobilization pattern included adsorption efficiency, ability of the immobilized cells to multiply within the carrier expressed as incubation efficiency and the degree of release of the immobilized cells from the carrier. The efficiency of adsorption and incubation was affected by the morphology of the immobilized cells and increased together with cellulose surface area. For smaller bacterial cells a higher level of loading was obtained on the same surface as compared to larger yeast cells. During incubation, the number of immobilized bacterial and yeast cells increased significantly in comparison to the number of cells adsorbed on the carrier during the adsorption step. Despite the morphological differences between the S. cerevisiae and Y. lipolytica cells, there were no statistically significant differences in the efficiency of adsorption and incubation. It was also revealed that the release ratio values obtained for L. delbruecki and S. cerevisiae increased along with cellulose surface area. Interestingly, Y. lipolytica cells in the pseudohyphae and hyphae forms penetrated deeply into the three-dimensional network of BC nanofibrils which prevented subsequent cell release. It was confirmed that carrier selection must be individually matched to the type of immobilized cells based especially on its porosity-related parameters.

A comparative analysis of single cell and droplet-based FACS for improving production phenotypes: Riboflavin overproduction in Yarrowia lipolytica.

Evolutionary approaches to strain engineering inherently require the identification of suitable selection techniques for the product and phenotype of interest. In this work, we undertake a comparative analysis of two related but functionally distinct methods of high-throughput screening: traditional single cell fluorescence activated cell sorting (single cell FACS) and microdroplet-enabled FACS (droplet FACS) using water/oil/water (w/o/w) emulsions. To do so, we first engineer and evolve the non-conventional yeast Yarrowia lipolytica for high extracellular production of riboflavin (vitamin B2), an innately fluorescent product. Following mutagenesis and adaptive evolution, a direct parity-matched comparison of these two selection strategies was conducted. Both single cell FACS and droplet FACS led to significant increases in total riboflavin titer (32 and 54 fold relative to the parental PO1f strain, respectively). However, single cell FACS favored intracellular riboflavin accumulation (with only 70% of total riboflavin secreted) compared with droplet FACS that favored extracellular product accumulation (with 90% of total riboflavin secreted). We find that for the test case of riboflavin, the extent of secretion and total production were highly correlated. The resulting differences in production modes and levels clearly demonstrate the significant impact that selection approaches can exert on final evolutionary outcomes in strain engineering. Moreover, we note that these results provide a cautionary tale when intracellular read-outs of product concentration (including signals from biosensors) are used as surrogates for total production of potentially secreted products. In this regard, these results demonstrate that extracellular production is best assayed through an encapsulation technique when performing high throughput screening.

High-efficiency transformation of Yarrowia lipolytica using electroporation.

Yarrowia lipolytica is an industrial host organism with incredible potential for metabolic engineering. However, the genetic tools and capacities in this host lag behind those of conventional counterparts. In this study, we sought to increase the transformation efficiency of Y. lipolytica by creating a simple protocol using electroporation. Efficiency was increased by optimizing wash buffers, pre-culture growth time, OD600 of competent cells, voltage, competent cell volume, DNA concentration, and recovery time. The outcome of these optimizations led to a simple protocol with maximum linear fragment transformation efficiency of 1.6 × 104 transformants per µg DNA and 2.8 × 104 transformants per µg DNA for episomal plasmid transformation. The protocol presented here is superior to other Y. lipolytica transformation protocols as it requires no lengthy pretreatment and no required carrier DNA to achieve efficiencies on par with, or exceeding, previously reported methods.

Determination of the effect of polyamines on an oil-degrading strain of Yarrowia lipolytica using an odc minus mutant.

Yarrowia lipolytica is an ascomycetous dimorphic yeast with immense potential for industrial applications, including bioremediation of crude oil-contaminated environments. It has been shown that a dimorphic marine isolate of Y. lipolytica (var. indica) has significant capacity to degrade fatty acids and alkanes, when in its yeast morphology. It has also been demonstrated that polyamines play an important role in the yeast-to-mycelium transition of different strains of Y. lipolytica that are unable to utilize those carbon sources. To determine the role of polyamines on their capacity to utilize oils and hydrocarbons, on the dimorphic transition, and also on other characteristics of the var. indica strain of Y. lipolytica, we proceeded to obtain ornithine decarboxylase minus (odc-) mutants. These mutants behaved as yeasts independently of the concentrations of putrescine added. Further, they conserved the oil-degrading capacity of the parent strain. The odc- mutant can thus be used in fatty acid degradation, and oil spill remediation with distinct advantages.

Impacts of environmental conditions on product formation and morphology of Yarrowia lipolytica.

The yeast Yarrowia lipolytica is an industrially important microorganism with distinctive physiological and metabolic characteristics. A variety of external factors (e.g., pH, temperature, and nutrient availability) influences the behavior of the yeast and may act as stress conditions which the cells must withstand and adapt. In this mini review, the impacts of environmental factors on the morphology and metabolite production by Y. lipolytica are summarized. In this regard, detailed insights into the effectors involved in the dimorphic transition of Y. lipolytica, the cultivation conditions employed, as well as the methods applied for the morphological characterization are highlighted. Concerning the metabolism products, a special focus is addressed on lipid and citric acid metabolites which have attracted significant attention in recent years. The dependence of lipid and citric acid productivity on key process parameters, such as media composition and physico-chemical variables, is thoroughly discussed. This review attempts to provide a recent update on the topic and will serve as a meaningful resource for researchers working in the field.

Morphological response of Yarrowia lipolytica under stress of heavy metals.

The marine dimorphic yeast Yarrowia lipolytica has been proposed as a suitable model for the dimorphism study. In this study, the morphological behaviour of two marine strains of Y. lipolytica (NCIM 3589 and NCIM 3590) was studied under stress of different heavy metals. Scanning electron microscopy was used to investigate the morphological features of yeast cells. This study revealed that the normal ellipsoidal shape of yeast cells was changed into oval, rounded, or elongated in response to different heavy-metal stress. Light microscopy was also used to investigate individual properties of yeast cells. The average cell length and radius of both marine strains was increased with increasing concentrations of heavy-metal ions. In addition, the elongation factor was calculated and was increased in the presence of heavy metals like Pb(II), Co(II), Cr(III), Cr(VI), and Zn(II) under the static conditions.

Engineering oxidative stress defense pathways to build a robust lipid production platform in Yarrowia lipolytica.

Microbially derived lipids have recently attracted renewed interests due to their broad applications in production of green diesels, cosmetic additives, and oleochemicals. Metabolic engineering efforts have targeted a large portfolio of biosynthetic pathways to efficiently convert sugar to lipids in oleaginous yeast. In the engineered overproducing strains, endogenous cell metabolism typically generates harmful electrophilic molecules that compromise cell fitness and productivity. Lipids, particularly unsaturated fatty acids, are highly susceptible to oxygen radical attack and the resulting oxidative species are detrimental to cell metabolism and limit lipid productivity. In this study, we investigated cellular oxidative stress defense pathways in Yarrowia lipolytica to further improve the lipid titer, yield, and productivity. Specifically, we determined that coupling glutathione disulfide reductase and glucose-6-phosphate dehydrogenase along with aldehyde dehydrogenase are efficient solutions to combat reactive oxygen and aldehyde stress in Y. lipolytica. With the reported engineering strategies, we were able to synchronize cell growth and lipid production, improve cell fitness and morphology, and achieved industrially-relevant level of lipid titer (72.7 g/L), oil content (81.4%) and productivity (0.97 g/L/h) in controlled bench-top bioreactors. The strategies reported here represent viable steps in the development of sustainable biorefinery platforms that potentially upgrade low value carbons to high value oleochemicals and biofuels. Biotechnol. Bioeng. 2017;114: 1521-1530. © 2017 Wiley Periodicals, Inc.

Dynamic behavior of Yarrowia lipolytica in response to pH perturbations: dependence of the stress response on the culture mode.

Yarrowia lipolytica, a non-conventional yeast with a promising biotechnological potential, is able to undergo metabolic and morphological changes in response to environmental conditions. The effect of pH perturbations of different types (pulses, Heaviside) on the dynamic behavior of Y. lipolytica W29 strain was characterized under two modes of culture: batch and continuous. In batch cultures, different pH (4.5, 5.6 (optimal condition), and 7) were investigated in order to identify the pH inducing a stress response (metabolic and/or morphologic) in Y. lipolytica. Macroscopic behavior (kinetic parameters, yields, viability) of the yeast was slightly affected by pH. However, contrary to the culture at pH 5.6, a filamentous growth was induced in batch experiments at pH 4.5 and 7. Proportions of the filamentous subpopulation reached 84 and 93 % (v/v) under acidic and neutral conditions, respectively. Given the significant impact of neutral pH on morphology, pH perturbations from 5.6 to 7 were subsequently assayed in batch and continuous bioreactors. For both process modes, the growth dynamics remained fundamentally unaltered during exposure to stress. Nevertheless, morphological behavior of the yeast was dependent on the culture mode. Specifically, in batch bioreactors where cells proliferated at their maximum growth rate, mycelia were mainly formed. Whereas, in continuous cultures at controlled growth rates (from 0.03 to 0.20 h-1) even closed to the maximum growth rate of the stain (0.24 h-1), yeast-like forms predominated. This pointed out differences in the kinetic behavior of filamentous and yeast subpopulations, cell age distribution, and pH adaptive mechanisms between both modes of culture.

Influence of oxygen availability on the metabolism and morphology of Yarrowia lipolytica: insights into the impact of glucose levels on dimorphism.

Dynamic behavior of Yarrowia lipolytica W29 strain under conditions of fluctuating, low, and limited oxygen supply was characterized in batch and glucose-limited chemostat cultures. In batch cultures, transient oscillations between oxygen-rich and -deprived environments induced a slight citric acid accumulation (lower than 29 mg L-1). By contrast, no citric acid was detected in continuous fermentations for all stress conditions: full anoxia (zero pO2 value, 100% N2), limited (zero pO2 value, 75% of cell needs), and low (pO2 close to 2%) dissolved oxygen (DO) levels. The macroscopic behavior (kinetic parameters, yields, viability) of Y. lipolytica was not significantly affected by the exposure to DO fluctuations under both modes of culture. Nevertheless, conditions of oxygen limitation resulted in the destabilization of the glucose-limited growth during the continuous cultivations. Morphological responses of Y. lipolytica to DO oscillations were different between batch and chemostat runs. Indeed, a yeast-to-mycelium transition was induced and progressively intensified during the batch fermentations (filamentous subpopulation reaching 74% (v/v)). While, in chemostat bioreactors, the culture consisted mainly of yeast-like cells (mean diameter not exceeding 5.7 µm) with a normal size distribution. During the continuous cultures, growth at low DO concentration did not induce any changes in Y. lipolytica morphology. Dimorphism (up to 80.5% (v/v) of filaments) was only detected under conditions of oxygen limitation in the presence of a residual glucose excess (more than 0.75 g L-1). These data suggest an impact of glucose levels on the signaling pathways regulating dimorphic responses in Y. lipolytica.

Overexpression of diacylglycerol acyltransferase in Yarrowia lipolytica affects lipid body size, number and distribution.

In the oleaginous yeast Yarrowia lipolytica, the diacylglycerol acyltransferases (DGATs) are major factors for triacylglycerol (TAG) synthesis. The Q4 strain, in which the four acyltransferases have been deleted, is unable to accumulate lipids and to form lipid bodies (LBs). However, the expression of a single acyltransferase in this strain restores TAG accumulation and LB formation. Using this system, it becomes possible to characterize the activity and specificity of an individual DGAT. Here, we examined the effects of DGAT overexpression on lipid accumulation and LB formation in Y. lipolytica Specifically, we evaluated the consequences of introducing one or two copies of the Y. lipolytica DGAT genes YlDGA1 and YlDGA2 Overall, multi-copy DGAT overexpression increased the lipid content of yeast cells. However, the size and distribution of LBs depended on the specific DGAT overexpressed. YlDGA2 overexpression caused the formation of large LBs, while YlDGA1 overexpression generated smaller but more numerous LBs. This phenotype was accentuated through the addition of a second copy of the overexpressed gene and might be linked to the distinct subcellular localization of each DGAT, i.e. YlDga1 being localized in LBs, while YlDga2 being localized in a structure strongly resembling the endoplasmic reticulum.

Dynein light chain interaction with the peroxisomal import docking complex modulates peroxisome biogenesis in yeast.

Dynein is a large macromolecular motor complex that moves cargo along microtubules. A motor-independent role for the light chain of dynein, Dyn2p, in peroxisome biology in Saccharomyces cerevisiae was suggested from its interaction with Pex14p, a component of the peroxisomal matrix protein import docking complex. Here we show that cells of the yeast Yarrowia lipolytica deleted for the gene encoding the homologue of Dyn2p are impaired in peroxisome function and biogenesis. These cells exhibit compromised growth on medium containing oleic acid as the carbon source, the metabolism of which requires functional peroxisomes. Their peroxisomes have abnormal morphology, atypical matrix protein localization, and an absence of proteolytic processing of the matrix enzyme thiolase, which normally occurs upon its import into the peroxisome. We also show physical and genetic interactions between Dyn2p and members of the docking complex, particularly Pex17p. Together, our results demonstrate a role for Dyn2p in the assembly of functional peroxisomes and provide evidence that Dyn2p acts in cooperation with the peroxisomal matrix protein import docking complex to effect optimal matrix protein import.

Efficient biosynthesis of γ-decalactone in ionic liquids by immobilized whole cells of Yarrowia lipolytica G3-3.21 on attapulgite.

In this study, the biosynthesis of γ-decalactone (GDL) was successfully conducted in an ionic liquid (IL)-containing cosolvent system using immobilized cells of Yarrowia lipolytica G3-3.21 on attapulgite (ATG). We found the immobilized Y. lipolytica G3-3.21 cells in N-butyl-pyridinium tetrafluoroborate ([BPy]BF4) solution gave the highest activity of C16-Acyl-CoA oxidase and the maximum yield of GDL. The optimum immobilization conditions for the highest yield of GDL were 20 g/L of ATG, 1.5 % of CaCl2 and 2 % of sodium alginate (NaAlg). The optimal [BPy]BF4 content, buffer pH, reaction temperature, shaking speed, castor oil and glucose contents were 7.5 %, 26 °C, 150 rpm, 100 g/L and 10 %, respectively. Under the optimized conditions, the GDL yield was up to 8.05 g/L. After ten times of reuse, the GDL yield was 7.51 g/L, corresponding to 93.3 % of that obtained in the first batch, suggesting a good reusability and potential for industrial applications.

Morphological and metabolic shifts of Yarrowia lipolytica induced by alteration of the dissolved oxygen concentration in the growth environment.

Yarrowia lipolytica, an ascomycete with biotechnological potential, is able to form either yeast cells or hyphae and pseudohyphae in response to environmental conditions. This study shows that the morphology of Y. lipolytica, cultivated in batch cultures on hydrophilic (glucose and glycerol) and hydrophobic (olive oil) media, was not affected by the nature of the carbon source, nor by the nature or the concentration of the nitrogen source. By contrast, dissolved oxygen concentration (DOC) should be considered as the major factor affecting yeast morphology. Specifically, when growth occurred at low or zero DOC the mycelial and/or pseudomycelial forms predominated over the yeast form independently of the carbon and nitrogen sources used. Experimental data obtained from a continuous culture of Y. lipolytica on glycerol, being used as carbon and energy source, demonstrated that the mycelium-to-yeast form transition occurs when DOC increases from 0.1 to 1.5 mg l(-1). DOC also affected the yeast physiology, as the activity of enzymes implicated in lipid biosynthesis (i.e. ATP-citrate lyase, malic enzyme) was upregulated at high DOC whereas the activity of enzymes implicated in glycerol assimilation (such as glycerol dehydrogenase and kinase) remained fundamentally unaffected in the cell-free extract.

Roles of the three Ras proteins in the regulation of dimorphic transition in the yeast Yarrowia lipolytica.

Ras proteins in the budding yeast Saccharomyces cerevisiae are essential for growth and dimorphic transition. The dimorphic yeast Yarrowia lipolytica is distantly related to S. cerevisiae. Its genome encodes three Ras proteins. Here, we show that the three Ras proteins in Y. lipolytica are critical for dimorphic transition but are dispensable for growth. Among the three Ras proteins, YlRas2 plays a major role in the regulation of dimorphic transition, whereas YlRas1 plays a minor role in this process. The additional Ras protein, YlRas3, which resembles mammalian K-Ras4B at the C-terminus, does not seem to have a significant role in dimorphic transition. Thus, the three Ras proteins do not act equally in the regulation of dimorphic transition. We also show that the expression of YlRAS2 was increased dramatically at the transcriptional level during yeast-to-hypha transition, consistent with a major role of YlRas2 in the regulation of dimorphic transition. YlRas2's function in dimorphic transition depends on the active GTP-bound form of YlRas2 and its localization to the plasma membrane. YlRas2 could also partially function on the endomembranes. In addition, we identified the transcription factor Mhy1 as a potential signal transducer downstream of YlRas2 in the control of dimorphic transition. This finding suggests that novel signaling pathway controlled by Ras proteins regulating dimorphic transition may exist in Y. lipolytica.

Dimorphism and hydrocarbon metabolism in Yarrowia lipolytica var. indica.

Yarrowia lipolytica is able to metabolize high Mr hydrophobic natural compounds such as fatty acids and hydrocarbons. Characteristically, strains of Y. lipolytica can grow as populations with variable proportions of yeast and filamentous forms. In the present study, we describe the dimorphic characteristics of a variant designated as Y. lipolytica var. indica isolated from petroleum contaminated sea water and the effect of cell morphology on hydrocarbon metabolism. The variant behaved as a yeast monomorphic strain, under conditions at which terrestrial Y. lipolytica strain W29 and its derived strains, grow as almost uniform populations of mycelial cells. Using organic nitrogen sources and N-acetylglucosamine as carbon source, var. indica was able to form mycelial cells, the proportion of which increased when incubated under semi-anaerobic conditions. The cell surface characteristics of var. indica and W29 were found to be different with respect to contact angle and percent hydrophobicity. For instance, percent hydrophobicity of var. indica was 89.93 ± 1.95 while that of W29 was 70.78 ± 1.1. Furthermore, while all tested strains metabolize hydrocarbons, only var. indica was able to use it as a carbon source. Yeast cells of var. indica metabolized hexadecane with higher efficiency than the mycelial form, whereas the mycelial form of the terrestrial strain metabolized the hydrocarbon more efficiently, as occurred with the mycelial monomorphic mutant AC11, compared to the yeast monomorphic mutant AC1.

Ylpex5 mutation partially suppresses the defective hyphal growth of a Yarrowia lipolytica ceramide synthase mutant, Yllac1, by recovering lipid raft polarization and vacuole morphogenesis.

Sphingolipids are involved in cell differentiation and morphogenesis in eukaryotic cells. In this study, YlLac1p, a ceramide synthase required for glucosylceramide (GlcCer) synthesis, was found to be essential for hyphal growth in Yarrowia lipolytica. Y. lipolytica GlcCer was shown to be composed of a C16:0 fatty acid, which is hydroxylated at C2, and a C18:2 long chain base, which is unsaturated at both C4 and C8 and methylated at C9. Domain swapping analysis revealed that the entire TRAM/Lag1/CLN8 (TLC) domain, not the Lag1 motif, is crucial for the function of YlLac1p. YlDes1p, the C4 desaturase of the ceramide synthesized by YlLac1p, was also required for Y. lipolytica morphogenesis. Both Yllac1Δ and Yldes1Δ mutants neither polarize lipid rafts nor form normal vacuoles. Interestingly, mutation in YlPEX5, which encode a peroxisomal targeting signal receptor, partially suppressed the defective hyphal growth of Yllac1Δ. The Yllac1ΔYlpex5Δ mutant restored the ability to polarize lipid rafts and to form normal vacuoles, although it could not synthesize GlcCer. Taken together, our results suggest that GlcCer or GlcCer derivatives may be involved in hyphal morphogenesis in Y. lipolytica, at least in part, by affecting polarization of lipid rafts and vacuole morphogenesis.

The TEA/ATTS transcription factor YlTec1p represses the yeast-to-hypha transition in the dimorphic yeast Yarrowia lipolytica.

Tec1p in the budding yeast Saccharomyces cerevisiae is important for dimorphic transition. In this study, we identified a homologue of Tec1p, YlTec1p, in the distantly related dimorphic yeast Yarrowia lipolytica. YlTec1p contains an evolutionarily conserved TEA/ATTS DNA-binding domain. Expression of YlTEC1 in S. cerevisiae tec1Δ cells rescued the invasive growth defect and activated a FLO11-lacZ reporter, indicating that YlTec1p is functionally related to Tec1p. However, YlTEC1 expression failed to activate an FRE-lacZ reporter, suggesting that these two transcription factors are different. YlTEC1 plays a negative role in the yeast-to-hypha transition in Y. lipolytica based on gene deletion and overexpression studies. We show that YlTec1p activates rather than represses gene expression in Y. lipolytica by yeast one-hybrid assay, and YlTec1p is critical for the activation of FLO11-lacZ in Y. lipolytica. In addition, YlTec1p localized to the nucleus and its nuclear localization decreased during hyphal growth. We speculate that YlTec1p may normally regulate the expression of a set of target genes that may prevent rather than promote hyphal development in Y. lipolytica. Our study also suggests that YlTEC1 may not be largely regulated by the cAMP-protein kinase A pathway.

The teleomorph state of Candida deformans Langeron & Guerra and description of Yarrowia yakushimensis comb. nov.

Yarrowia lipolytica is the only known species in the teleomorph (i.e. sexual) genus Yarrowia and has its anamorph (i.e. asexual state) classified in the genus Candida Berkhout as Candida lipolytica. This species can be found readily in nature, has significant industrial value and is important to the food and medical fields. Candida deformans was first considered a variety of C. lipolytica and was later listed as a synonym of this species. More recent studies based on sequence variation in the nuclear rRNA gene sequences suggested C. deformans to be a separate species with no known teleomorph linked to it. In this study we show that C. deformans strains, obtained from South Africa, can mate with strains present in the CBS yeast collection and produce a Yarrowia teleomorph, described here as Yarrowia deformans. Strains of Candida yakushimensis nom. inval., a species also belonging to the Yarrowia phylogenetic clade, were also studied and described as a novel species of Yarrowia.