RESUMEN
In this study poly (4-nitrophenylazo-3-aminopyridine - formaldehyde) (PNAAP-F) and poly (4-nitroarylazo-3-chloro-6-hydroxypyridine - formaldehyde) (NAACHP-F) were synthesized via diazotization, coupling and polycondensation reactions. The structural properties of the as-synthesized dyes were acquired using Fourier-transform infrared spectroscopy (FTIR) and UV-visible absorption maxima and their color, yield, melting point, solubility, and viscosity were determined via standard methods. UV-visible and FTIR results show successful formation of the polymeric dyes due to shift of wavelength of maximum absorption (λmax) (440-490 nm, 480-540 nm) and new absorption peak at around (2780-2995 cm-1) for methylene bridge respectively. The dyes were found to be of good yield (monomeric: 73.3%-87.2 %, polymeric: 53.8%-76.6 %), low melting point (monomeric: 112.6-121.2, and 136.0-137.0 °C, while polymeric: 134.0-144.5, and 149.4-154.7 °C), soluble in some solvents. The dyeing activity was carried out and assessed on nylon and polyester fabrics using the standard methods. The dyeing process was carried out via high temperature and carrier dyeing methods. The dyeing properties of the synthesized dyes were compared with those of commercial disperse dyes (terasil brilliant violet and terasil scarlet, brown). The dyeings of nylon and polyester had a very attractive hue and the color ranges from yellow and deep yellow shades with very good to excellent fastness to light, washing, hot pressing, and rubbing.
RESUMEN
In this work, a polypyrrole-polyethyleneimine (PPy-PEI) nano-adsorbent was successfully synthesized for the removal of methylene blue (MB) from an aqueous solution. Synthetic dyes are among the most prevalent environmental contaminants. A new conducting polymer-based adsorbent called (PPy-PEI) was successfully produced using ammonium persulfate as an oxidant. The PEI hyper-branched polymer with terminal amino groups was added to the PPy adsorbent to provide more effective chelating sites for dyes. An efficient dye removal from an aqueous solution was demonstrated using a batch equilibrium technique that included a polyethyleneimine nano-adsorbent (PPy-PEI). The best adsorption parameters were measured at a 0.35 g dosage of adsorbent at a pH of 6.2 and a contact period of 40 min at room temperature. The produced PPy-PEI nano-adsorbent has an average particle size of 25-60 nm and a BET surface area of 17 m2/g. The results revealed that PPy-PEI nano-composite was synthesized, and adsorption was accomplished in the minimum amount of time. The maximum monolayer power, qmax, for MB was calculated using the isothermal adsorption data, which matched the Langmuir isotherm model, and the kinetic adsorption data, which more closely fitted the Langmuir pseudo-second-order kinetic model. The Langmuir model was used to calculate the maximum monolayer capacity, or qmax, for MB, which was found to be 183.3 mg g-1. The as-prepared PPy-PEI nano-adsorbent totally removes the cationic dyes from the aqueous solution.