CIBRA identifies genomic alterations with a system-wide impact on tumor biology.

MOTIVATION: Genomic instability is a hallmark of cancer, leading to many somatic alterations. Identifying which alterations have a system-wide impact is a challenging task. Nevertheless, this is an essential first step for prioritizing potential biomarkers. We developed CIBRA (Computational Identification of Biologically Relevant Alterations), a method that determines the system-wide impact of genomic alterations on tumor biology by integrating two distinct omics data types: one indicating genomic alterations (e.g. genomics), and another defining a system-wide expression response (e.g. transcriptomics). CIBRA was evaluated with genome-wide screens in 33 cancer types using primary and metastatic cancer data from the Cancer Genome Atlas and Hartwig Medical Foundation. RESULTS: We demonstrate the capability of CIBRA by successfully confirming the impact of point mutations in experimentally validated oncogenes and tumor suppressor genes (0.79 AUC). Surprisingly, many genes affected by structural variants were identified to have a strong system-wide impact (30.3%), suggesting that their role in cancer development has thus far been largely under-reported. Additionally, CIBRA can identify impact with only 10 cases and controls, providing a novel way to prioritize genomic alterations with a prominent role in cancer biology. Our findings demonstrate that CIBRA can identify cancer drivers by combining genomics and transcriptomics data. Moreover, our work shows an unexpected substantial system-wide impact of structural variants in cancer. Hence, CIBRA has the potential to preselect and refine current definitions of genomic alterations to derive more nuanced biomarkers for diagnostics, disease progression, and treatment response. AVAILABILITY AND IMPLEMENTATION: The R package CIBRA is available at https://github.com/AIT4LIFE-UU/CIBRA.

Methods to Discover and Validate Biofluid-Based Biomarkers in Neurodegenerative Dementias.

Neurodegenerative dementias are progressive diseases that cause neuronal network breakdown in different brain regions often because of accumulation of misfolded proteins in the brain extracellular matrix, such as amyloids or inside neurons or other cell types of the brain. Several diagnostic protein biomarkers in body fluids are being used and implemented, such as for Alzheimer's disease. However, there is still a lack of biomarkers for co-pathologies and other causes of dementia. Such biofluid-based biomarkers enable precision medicine approaches for diagnosis and treatment, allow to learn more about underlying disease processes, and facilitate the development of patient inclusion and evaluation tools in clinical trials. When designing studies to discover novel biofluid-based biomarkers, choice of technology is an important starting point. But there are so many technologies to choose among. To address this, we here review the technologies that are currently available in research settings and, in some cases, in clinical laboratory practice. This presents a form of lexicon on each technology addressing its use in research and clinics, its strengths and limitations, and a future perspective.

Structural flexibility and heterogeneity of recombinant human glial fibrillary acidic protein (GFAP).

Glial fibrillary acidic protein (GFAP) is a promising biomarker for brain and spinal cord disorders. Recent studies have highlighted the differences in the reliability of GFAP measurements in different biological matrices. The reason for these discrepancies is poorly understood as our knowledge of the protein's 3-dimensional conformation, proteoforms, and aggregation remains limited. Here, we investigate the structural properties of GFAP under different conditions. For this, we characterized recombinant GFAP proteins from various suppliers and applied hydrogen-deuterium exchange mass spectrometry (HDX-MS) to provide a snapshot of the conformational dynamics of GFAP in artificial cerebrospinal fluid (aCSF) compared to the phosphate buffer. Our findings indicate that recombinant GFAP exists in various conformational species. Furthermore, we show that GFAP dimers remained intact under denaturing conditions. HDX-MS experiments show an overall decrease in H-bonding and an increase in solvent accessibility of GFAP in aCSF compared to the phosphate buffer, with clear indications of mixed EX2 and EX1 kinetics. To understand possible structural interface regions and the evolutionary conservation profiles, we combined HDX-MS results with the predicted GFAP-dimer structure by AlphaFold-Multimer. We found that deprotected regions with high structural flexibility in aCSF overlap with predicted conserved dimeric 1B and 2B domain interfaces. Structural property predictions combined with the HDX data show an overall deprotection and signatures of aggregation in aCSF. We anticipate that the outcomes of this research will contribute to a deeper understanding of the structural flexibility of GFAP and ultimately shed light on its behavior in different biological matrices.

The GFAP proteoform puzzle: How to advance GFAP as a fluid biomarker in neurological diseases.

Glial fibrillary acidic protein (GFAP) is a well-established biomarker of reactive astrogliosis in the central nervous system because of its elevated levels following brain injury and various neurological disorders. The advent of ultra-sensitive methods for measuring low-abundant proteins has significantly enhanced our understanding of GFAP levels in the serum or plasma of patients with diverse neurological diseases. Clinical studies have demonstrated that GFAP holds promise both as a diagnostic and prognostic biomarker, including but not limited to individuals with Alzheimer's disease. GFAP exhibits diverse forms and structures, herein referred to as its proteoform complexity, encompassing conformational dynamics, isoforms and post-translational modifications (PTMs). In this review, we explore how the proteoform complexity of GFAP influences its detection, which may affect the differential diagnostic performance of GFAP in different biological fluids and can provide valuable insights into underlying biological processes. Additionally, proteoforms are often disease-specific, and our review provides suggestions and highlights areas to focus on for the development of new assays for measuring GFAP, including isoforms, PTMs, discharge mechanisms, breakdown products, higher-order species and interacting partners. By addressing the knowledge gaps highlighted in this review, we aim to support the clinical translation and interpretation of GFAP in both CSF and blood and the development of reliable, reproducible and specific prognostic and diagnostic tests. To enhance disease pathology comprehension and optimise GFAP as a biomarker, a thorough understanding of detected proteoforms in biofluids is essential.

Deciphering Protein Secretion from the Brain to Cerebrospinal Fluid for Biomarker Discovery.

Cerebrospinal fluid (CSF) is an essential matrix for the discovery of neurological disease biomarkers. However, the high dynamic range of protein concentrations in CSF hinders the detection of the least abundant protein biomarkers by untargeted mass spectrometry. It is thus beneficial to gain a deeper understanding of the secretion processes within the brain. Here, we aim to explore if and how the secretion of brain proteins to the CSF can be predicted. By combining a curated CSF proteome and the brain elevated proteome of the Human Protein Atlas, brain proteins were classified as CSF or non-CSF secreted. A machine learning model was trained on a range of sequence-based features to differentiate between CSF and non-CSF groups and effectively predict the brain origin of proteins. The classification model achieves an area under the curve of 0.89 if using high confidence CSF proteins. The most important prediction features include the subcellular localization, signal peptides, and transmembrane regions. The classifier generalized well to the larger brain detected proteome and is able to correctly predict novel CSF proteins identified by affinity proteomics. In addition to elucidating the underlying mechanisms of protein secretion, the trained classification model can support biomarker candidate selection.

PIPENN: protein interface prediction from sequence with an ensemble of neural nets.

MOTIVATION: The interactions between proteins and other molecules are essential to many biological and cellular processes. Experimental identification of interface residues is a time-consuming, costly and challenging task, while protein sequence data are ubiquitous. Consequently, many computational and machine learning approaches have been developed over the years to predict such interface residues from sequence. However, the effectiveness of different Deep Learning (DL) architectures and learning strategies for protein-protein, protein-nucleotide and protein-small molecule interface prediction has not yet been investigated in great detail. Therefore, we here explore the prediction of protein interface residues using six DL architectures and various learning strategies with sequence-derived input features. RESULTS: We constructed a large dataset dubbed BioDL, comprising protein-protein interactions from the PDB, and DNA/RNA and small molecule interactions from the BioLip database. We also constructed six DL architectures, and evaluated them on the BioDL benchmarks. This shows that no single architecture performs best on all instances. An ensemble architecture, which combines all six architectures, does consistently achieve peak prediction accuracy. We confirmed these results on the published benchmark set by Zhang and Kurgan (ZK448), and on our own existing curated homo- and heteromeric protein interaction dataset. Our PIPENN sequence-based ensemble predictor outperforms current state-of-the-art sequence-based protein interface predictors on ZK448 on all interaction types, achieving an AUC-ROC of 0.718 for protein-protein, 0.823 for protein-nucleotide and 0.842 for protein-small molecule. AVAILABILITY AND IMPLEMENTATION: Source code and datasets are available at https://github.com/ibivu/pipenn/. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

INFLECT: an R-package for cytometry cluster evaluation using marker modality.

BACKGROUND: Current methods of high-dimensional unsupervised clustering of mass cytometry data lack means to monitor and evaluate clustering results. Whether unsupervised clustering is correct is typically evaluated by agreement with dimensionality reduction techniques or based on benchmarking with manually classified cells. The ambiguity and lack of reproducibility of sequential gating has been replaced with ambiguity in interpretation of clustering results. On the other hand, spurious overclustering of data leads to loss of statistical power. We have developed INFLECT, an R-package designed to give insight in clustering results and provide an optimal number of clusters. In our approach, a mass cytometry dataset is overclustered intentionally to ensure the smallest phenotypically different subsets are captured using FlowSOM. A range of metacluster number endpoints are generated and evaluated using marker interquartile range and distribution unimodality checks. The fraction of marker distributions that pass these checks is taken as a measure of clustering success. The fraction of unimodal distributions within metaclusters is plotted against the number of generated metaclusters and reaches a plateau of diminishing returns. The inflection point at which this occurs gives an optimal point of capturing cellular heterogeneity versus statistical power. RESULTS: We applied INFLECT to four publically available mass cytometry datasets of different size and number of markers. The unimodality score consistently reached a plateau, with an inflection point dependent on dataset size and number of dimensions. We tested both ConsenusClusterPlus metaclustering and hierarchical clustering. While hierarchical clustering is less computationally expensive and thus faster, it achieved similar results to ConsensusClusterPlus. The four datasets consisted of labeled data and we compared INFLECT metaclustering to published results. INFLECT identified a higher optimal number of metaclusters for all datasets. We illustrated the underlying heterogeneity within labels, showing that these labels encompass distinct types of cells. CONCLUSION: INFLECT addresses a knowledge gap in high-dimensional cytometry analysis, namely assessing clustering results. This is done through monitoring marker distributions for interquartile range and unimodality across a range of metacluster numbers. The inflection point is the optimal trade-off between cellular heterogeneity and statistical power, applied in this work for FlowSOM clustering on mass cytometry datasets.

SeRenDIP-CE: sequence-based interface prediction for conformational epitopes.

MOTIVATION: Antibodies play an important role in clinical research and biotechnology, with their specificity determined by the interaction with the antigen's epitope region, as a special type of protein-protein interaction (PPI) interface. The ubiquitous availability of sequence data, allows us to predict epitopes from sequence in order to focus time-consuming wet-lab experiments toward the most promising epitope regions. Here, we extend our previously developed sequence-based predictors for homodimer and heterodimer PPI interfaces to predict epitope residues that have the potential to bind an antibody. RESULTS: We collected and curated a high quality epitope dataset from the SAbDab database. Our generic PPI heterodimer predictor obtained an AUC-ROC of 0.666 when evaluated on the epitope test set. We then trained a random forest model specifically on the epitope dataset, reaching AUC 0.694. Further training on the combined heterodimer and epitope datasets, improves our final predictor to AUC 0.703 on the epitope test set. This is better than the best state-of-the-art sequence-based epitope predictor BepiPred-2.0. On one solved antibody-antigen structure of the COVID19 virus spike receptor binding domain, our predictor reaches AUC 0.778. We added the SeRenDIP-CE Conformational Epitope predictors to our webserver, which is simple to use and only requires a single antigen sequence as input, which will help make the method immediately applicable in a wide range of biomedical and biomolecular research. AVAILABILITY AND IMPLEMENTATION: Webserver, source code and datasets at www.ibi.vu.nl/programs/serendipwww/. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

The hydrophobic effect characterises the thermodynamic signature of amyloid fibril growth.

Many proteins have the potential to aggregate into amyloid fibrils, protein polymers associated with a wide range of human disorders such as Alzheimer's and Parkinson's disease. The thermodynamic stability of amyloid fibrils, in contrast to that of folded proteins, is not well understood: the balance between entropic and enthalpic terms, including the chain entropy and the hydrophobic effect, are poorly characterised. Using a combination of theory, in vitro experiments, simulations of a coarse-grained protein model and meta-data analysis, we delineate the enthalpic and entropic contributions that dominate amyloid fibril elongation. Our prediction of a characteristic temperature-dependent enthalpic signature is confirmed by the performed calorimetric experiments and a meta-analysis over published data. From these results we are able to define the necessary conditions to observe cold denaturation of amyloid fibrils. Overall, we show that amyloid fibril elongation is associated with a negative heat capacity, the magnitude of which correlates closely with the hydrophobic surface area that is buried upon fibril formation, highlighting the importance of hydrophobicity for fibril stability.

SeRenDIP: SEquential REmasteriNg to DerIve profiles for fast and accurate predictions of PPI interface positions.

MOTIVATION: Interpretation of ubiquitous protein sequence data has become a bottleneck in biomolecular research, due to a lack of structural and other experimental annotation data for these proteins. Prediction of protein interaction sites from sequence may be a viable substitute. We therefore recently developed a sequence-based random forest method for protein-protein interface prediction, which yielded a significantly increased performance than other methods on both homomeric and heteromeric protein-protein interactions. Here, we present a webserver that implements this method efficiently. RESULTS: With the aim of accelerating our previous approach, we obtained sequence conservation profiles by re-mastering the alignment of homologous sequences found by PSI-BLAST. This yielded a more than 10-fold speedup and at least the same accuracy, as reported previously for our method; these results allowed us to offer the method as a webserver. The web-server interface is targeted to the non-expert user. The input is simply a sequence of the protein of interest, and the output a table with scores indicating the likelihood of having an interaction interface at a certain position. As the method is sequence-based and not sensitive to the type of protein interaction, we expect this webserver to be of interest to many biological researchers in academia and in industry. AVAILABILITY AND IMPLEMENTATION: Webserver, source code and datasets are available at www.ibi.vu.nl/programs/serendipwww/. SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Tailor-made multiple sequence alignments using the PRALINE 2 alignment toolkit.

SUMMARY: PRALINE 2 is a toolkit for custom multiple sequence alignment workflows. It can be used to incorporate sequence annotations, such as secondary structure or (DNA) motifs, into the alignment scoring, as well as to customize many other aspects of a progressive multiple alignment workflow. AVAILABILITY AND IMPLEMENTATION: PRALINE 2 is implemented in Python and available as open source software on GitHub: https://github.com/ibivu/PRALINE/.

Training for translation between disciplines: a philosophy for life and data sciences curricula.

Motivation: Our society has become data-rich to the extent that research in many areas has become impossible without computational approaches. Educational programmes seem to be lagging behind this development. At the same time, there is a growing need not only for strong data science skills, but foremost for the ability to both translate between tools and methods on the one hand, and application and problems on the other. Results: Here we present our experiences with shaping and running a masters' programme in bioinformatics and systems biology in Amsterdam. From this, we have developed a comprehensive philosophy on how translation in training may be achieved in a dynamic and multidisciplinary research area, which is described here. We furthermore describe two requirements that enable translation, which we have found to be crucial: sufficient depth and focus on multidisciplinary topic areas, coupled with a balanced breadth from adjacent disciplines. Finally, we present concrete suggestions on how this may be implemented in practice, which may be relevant for the effectiveness of life science and data science curricula in general, and of particular interest to those who are in the process of setting up such curricula. Supplementary information: Supplementary data are available at Bioinformatics online.

Motif-Aware PRALINE: Improving the alignment of motif regions.

Protein or DNA motifs are sequence regions which possess biological importance. These regions are often highly conserved among homologous sequences. The generation of multiple sequence alignments (MSAs) with a correct alignment of the conserved sequence motifs is still difficult to achieve, due to the fact that the contribution of these typically short fragments is overshadowed by the rest of the sequence. Here we extended the PRALINE multiple sequence alignment program with a novel motif-aware MSA algorithm in order to address this shortcoming. This method can incorporate explicit information about the presence of externally provided sequence motifs, which is then used in the dynamic programming step by boosting the amino acid substitution matrix towards the motif. The strength of the boost is controlled by a parameter, α. Using a benchmark set of alignments we confirm that a good compromise can be found that improves the matching of motif regions while not significantly reducing the overall alignment quality. By estimating α on an unrelated set of reference alignments we find there is indeed a strong conservation signal for motifs. A number of typical but difficult MSA use cases are explored to exemplify the problems in correctly aligning functional sequence motifs and how the motif-aware alignment method can be employed to alleviate these problems.

BioASF: a framework for automatically generating executable pathway models specified in BioPAX.

MOTIVATION: Biological pathways play a key role in most cellular functions. To better understand these functions, diverse computational and cell biology researchers use biological pathway data for various analysis and modeling purposes. For specifying these biological pathways, a community of researchers has defined BioPAX and provided various tools for creating, validating and visualizing BioPAX models. However, a generic software framework for simulating BioPAX models is missing. Here, we attempt to fill this gap by introducing a generic simulation framework for BioPAX. The framework explicitly separates the execution model from the model structure as provided by BioPAX, with the advantage that the modelling process becomes more reproducible and intrinsically more modular; this ensures natural biological constraints are satisfied upon execution. The framework is based on the principles of discrete event systems and multi-agent systems, and is capable of automatically generating a hierarchical multi-agent system for a given BioPAX model. RESULTS: To demonstrate the applicability of the framework, we simulated two types of biological network models: a gene regulatory network modeling the haematopoietic stem cell regulators and a signal transduction network modeling the Wnt/ß-catenin signaling pathway. We observed that the results of the simulations performed using our framework were entirely consistent with the simulation results reported by the researchers who developed the original models in a proprietary language. AVAILABILITY AND IMPLEMENTATION: The framework, implemented in Java, is open source and its source code, documentation and tutorial are available at http://www.ibi.vu.nl/programs/BioASF CONTACT: j.heringa@vu.nl.

metaModules identifies key functional subnetworks in microbiome-related disease.

MOTIVATION: The human microbiome plays a key role in health and disease. Thanks to comparative metatranscriptomics, the cellular functions that are deregulated by the microbiome in disease can now be computationally explored. Unlike gene-centric approaches, pathway-based methods provide a systemic view of such functions; however, they typically consider each pathway in isolation and in its entirety. They can therefore overlook the key differences that (i) span multiple pathways, (ii) contain bidirectionally deregulated components, (iii) are confined to a pathway region. To capture these properties, computational methods that reach beyond the scope of predefined pathways are needed. RESULTS: By integrating an existing module discovery algorithm into comparative metatranscriptomic analysis, we developed metaModules, a novel computational framework for automated identification of the key functional differences between health- and disease-associated communities. Using this framework, we recovered significantly deregulated subnetworks that were indeed recognized to be involved in two well-studied, microbiome-mediated oral diseases, such as butanoate production in periodontal disease and metabolism of sugar alcohols in dental caries. More importantly, our results indicate that our method can be used for hypothesis generation based on automated discovery of novel, disease-related functional subnetworks, which would otherwise require extensive and laborious manual assessment. AVAILABILITY AND IMPLEMENTATION: metaModules is available at https://bitbucket.org/alimay/metamodules/ CONTACT: a.may@vu.nl or s.abeln@vu.nl SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

NGS-eval: NGS Error analysis and novel sequence VAriant detection tooL.

Massively parallel sequencing of microbial genetic markers (MGMs) is used to uncover the species composition in a multitude of ecological niches. These sequencing runs often contain a sample with known composition that can be used to evaluate the sequencing quality or to detect novel sequence variants. With NGS-eval, the reads from such (mock) samples can be used to (i) explore the differences between the reads and their references and to (ii) estimate the sequencing error rate. This tool maps these reads to references and calculates as well as visualizes the different types of sequencing errors. Clearly, sequencing errors can only be accurately calculated if the reference sequences are correct. However, even with known strains, it is not straightforward to select the correct references from databases. We previously analysed a pyrosequencing dataset from a mock sample to estimate sequencing error rates and detected sequence variants in our mock community, allowing us to obtain an accurate error estimation. Here, we demonstrate the variant detection and error analysis capability of NGS-eval with Illumina MiSeq reads from the same mock community. While tailored towards the field of metagenomics, this server can be used for any type of MGM-based reads. NGS-eval is available at http://www.ibi.vu.nl/programs/ngsevalwww/.

Consistent Treatment of Hydrophobicity in Protein Lattice Models Accounts for Cold Denaturation.

The hydrophobic effect stabilizes the native structure of proteins by minimizing the unfavorable interactions between hydrophobic residues and water through the formation of a hydrophobic core. Here, we include the entropic and enthalpic contributions of the hydrophobic effect explicitly in an implicit solvent model. This allows us to capture two important effects: a length-scale dependence and a temperature dependence for the solvation of a hydrophobic particle. This consistent treatment of the hydrophobic effect explains cold denaturation and heat capacity measurements of solvated proteins.

The hydrophobic temperature dependence of amino acids directly calculated from protein structures.

The hydrophobic effect is the main driving force in protein folding. One can estimate the relative strength of this hydrophobic effect for each amino acid by mining a large set of experimentally determined protein structures. However, the hydrophobic force is known to be strongly temperature dependent. This temperature dependence is thought to explain the denaturation of proteins at low temperatures. Here we investigate if it is possible to extract this temperature dependence directly from a large set of protein structures determined at different temperatures. Using NMR structures filtered for sequence identity, we were able to extract hydrophobicity propensities for all amino acids at five different temperature ranges (spanning 265-340 K). These propensities show that the hydrophobicity becomes weaker at lower temperatures, in line with current theory. Alternatively, one can conclude that the temperature dependence of the hydrophobic effect has a measurable influence on protein structures. Moreover, this work provides a method for probing the individual temperature dependence of the different amino acid types, which is difficult to obtain by direct experiment.

Mapping the Protein Fold Universe Using the CamTube Force Field in Molecular Dynamics Simulations.

It has been recently shown that the coarse-graining of the structures of polypeptide chains as self-avoiding tubes can provide an effective representation of the conformational space of proteins. In order to fully exploit the opportunities offered by such a 'tube model' approach, we present here a strategy to combine it with molecular dynamics simulations. This strategy is based on the incorporation of the 'CamTube' force field into the Gromacs molecular dynamics package. By considering the case of a 60-residue polyvaline chain, we show that CamTube molecular dynamics simulations can comprehensively explore the conformational space of proteins. We obtain this result by a 20 µs metadynamics simulation of the polyvaline chain that recapitulates the currently known protein fold universe. We further show that, if residue-specific interaction potentials are added to the CamTube force field, it is possible to fold a protein into a topology close to that of its native state. These results illustrate how the CamTube force field can be used to explore efficiently the universe of protein folds with good accuracy and very limited computational cost.

Bioinformatics and systems biology: bridging the gap between heterogeneous student backgrounds.

Teaching students with very diverse backgrounds can be extremely challenging. This article uses the Bioinformatics and Systems Biology MSc in Amsterdam as a case study to describe how the knowledge gap for students with heterogeneous backgrounds can be bridged. We show that a mix in backgrounds can be turned into an advantage by creating a stimulating learning environment for the students. In the MSc Programme, conversion classes help to bridge differences between students, by mending initial knowledge and skill gaps. Mixing students from different backgrounds in a group to solve a complex task creates an opportunity for the students to reflect on their own abilities. We explain how a truly interdisciplinary approach to teaching helps students of all backgrounds to achieve the MSc end terms. Moreover, transferable skills obtained by the students in such a mixed study environment are invaluable for their later careers.