Application of polysaccharide biopolymers as natural adsorbent in sample preparation.

Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.

Comparative evaluation of nutrient composition, in vitro nutritional value, and antioxidant activity of de-oiled meals from walnut, hazelnut, almond, and sesame.

This study aimed to establish a comparative database on the chemical composition, in vitro nutritional value, and antioxidant activity of the de-oiled meals produced from walnut, hazelnut, almond, and sesame seeds from the ruminant nutrition perspective. The meals were provided in dried form after their oil harvest using the cold-pressing oil extraction method. Crude protein (CP) constituted the major component of the meals and was the greatest in walnut and almond (average of 45.6% of dry matter (DM)], intermediate in hazelnut meal (41.4%), and least in sesame meal (33.3%)). Potassium was the most abundant mineral in walnut, hazelnut, and almond meals, followed by phosphorus, calcium, and magnesium. The CP fractions determined using the Cornell Net Carbohydrate and Protein System were largely different across the meals, with fraction A being the greatest in hazelnut (40.9% of CP) and intermediate in almond, sesame, and walnut meals (11.4% of CP). The unavailable CP fraction (fraction C) was the least abundant fraction in all meals, ranging from 0.13% of CP in walnut to 3.30% of CP in hazelnut meal. Oleic and linoleic acids were the predominant unsaturated fatty acids, and palmitic acid was the principal fatty acid in all meals analyzed. The fractional degradation rate (h-1) ranged from 0.043 in almond meal to 0.017 in walnut meal. In vitro intestinal CP digestibility (% of rumen-undegraded protein) ranged from 91.6 in hazelnut meal to 97.2 in almond meal. Total phenolics expressed as milligram tannic acid equivalent/gram DM was greatest in walnut meal (11.9), resulting in the greatest antioxidant activity recorded for walnut meal (83.2%). This study provided a database on the nutrient composition, in vitro nutritional value, and antioxidant capacity of the selected de-oiled meals. Additional investigation is needed to identify the in vivo response of their inclusion in the diet of ruminants.

Short communication: dietary vitamin A restriction may improve meat quality parameters in fat-tailed lambs.

Thirty fat-tailed Mehraban ram lambs were randomly allotted into three vitamin A (VA) dietary treatment groups: either 100 (VA100), 50 (VA50), or 25% (VA25) of the recommended daily vitamin A requirements. Treatment had no effect on feed intake, daily live weight gain, cold carcass weight, and dressing percentage. In M. longissimus lumborum (LL) of VA100 lambs, malondialdehyde level was greater, but ether-extractable intramuscular fat concentration was lower. The proportion of C16:0 and C20:0 fatty acids in total fatty acids of LL was lower in VA100 lambs, compared to VA50 and VA25 lambs. Conversely, greater proportions of C17:0, C17:1, C18:1, and C18:2 fatty acids were recorded in VA100 lambs. Stearoyl-CoA desaturase activity index (the ratios of C16:0 to C16:1 and C18:0 to C18:1) was not influenced by dietary vitamin A level. Future research is needed to determine the optimum level of dietary vitamin A concentration for deposition of greater intramuscular fat in fat-tailed sheep.

Effect of crude protein content and undegraded intake protein level on productivity, blood metabolites, carcass characteristics, and production economics of Hanwoo steers.

OBJECTIVE: This study was designed to determine how feeding diets differing in crude protein (CP) and undegraded intake protein (UIP) levels affected productivity, blood metabolites, carcass characteristics, and the production economics of Hanwoo steers. METHODS: Thirty-six Hanwoo steers (age = 8.2±0.5 mo; body weight = 254±16.1 kg) were assigned at random to one of three treatments (4 steers/pen; 3 pens/treatment): i) a low-CP diet (LP; control) containing 12.1% CP with 35.1% UIP, 12.0% CP with 36.8% UIP, and 12.9% CP with 48.8% UIP, in the growing, fattening, and finishing periods, respectively; ii) a high-CP, low-UIP diet (HPLU) containing 15.0% CP with 33.7% UIP, 14.0% CP with 35.7% UIP, and 13.1% CP with 46.7% UIP, respectively; and iii) a high-CP, high-UIP diet (HPHU) containing 15.0% CP with 45.8% UIP, 14.0% CP with 44.6% UIP, and 13.0% CP with 51.1% UIP, respectively. RESULTS: The treatments did not affect feed intake and growth performance, except for average daily gain during the fattening period that tended to be the lowest (p = 0.08) in the HPLUfed steers. The feed CP conversion ratio over the entire feeding period was higher with high-CP diets. The treatments did not affect most blood metabolites; however, blood cholesterol and low-density lipoprotein concentrations during the fattening and finishing periods were the lowest in steers fed a HPLU diet. The treatments had negligible effects on cold carcass weight, yield traits including longissimus muscle area, backfat thickness, yield index, and yield grade, plus quality traits including meat color, fat color, texture, and maturity. However, marbling score and frequency of carcass quality grade 1++ were greater in HPHU-fed steers. CONCLUSION: Feeding diets with higher CP and UIP levels did not affect growth performance but tended to improve the carcass quality of Hanwoo steers, resulting in greater economic return.

Fruit and vegetable discards preserved with sodium metabisulfite as a high-moisture ingredient in total mixed ration for ruminants: effect on in vitro ruminal fermentation and in vivo metabolism.

OBJECTIVE: Our recent series of laboratory- and large-scale experiments confirmed that under aerobic and anaerobic conditions, sodium metabisulfite (SMB) was effective in preserving nutrients and antioxidant capacity of highly perishable fruit and vegetable discards (FVD). Hence, the purpose of this study was to examine how partial inclusion of SMB-treated FVD in total mixed ration (TMR) influences in vitro ruminal fermentation, whole-tract digestibility, nitrogen metabolism, blood metabolites, and voluntary feed intake of sheep. METHODS: The FVD were mixed thoroughly with 6 g SMB/kg wet biomass and kept outdoors under aerobic conditions for 7 days. Four TMRs including four levels of SMB-treated FVD (as-fed basis) at 0%, 10%, 20%, and 30% (equaling to 0%, 1.9%, 3.8%, and 5.7% on dry matter basis, respectively), were prepared as replacement for corn grain. The ruminal fermentation metabolites were studied using an in vitro gas production test. Four mature male Corriedale sheep were assigned at random to the 4 diets for two separate sub-experiments; i) digestibility trial with four 21-d periods, and ii) voluntary feed intake trial with four 28-d periods. RESULTS: Inclusion of SMB-treated FVD in the TMR tended to quadratically increase partitioning factor. No effect was seen on total-tract digestibility of organic matter, ether extract, crude protein, and acid detergent fiber, except for neutral detergent fiber digestibility that tended to linearly increase with increasing SMB-treated FVD in the TMR. The progressive increase of FVD preserved with SMB in the diet had no effect on nitrogen metabolism. Treatment had no effect on serum antioxidant capacity and blood metabolites assayed. Voluntary feed intake was not impaired by inclusion of SMB-treated FVD in the TMR. CONCLUSION: It appears that FVD preserved with SMB can be safely incorporated into TMR as replacement of corn grain without impairment of nutrient metabolism and feed intake.

Co-ensiling garlic stalk with citrus pulp improves the fermentation quality and feed-nutritional value.

OBJECTIVE: Ensiling is a simple and effective method for long-term preservation; however, less information exists about the ensilability characteristics of garlic stalk (GS). Therefore, the objectives were to examine the ensiling feasibility of GS. METHODS: The GS was ensiled alone or inoculated with Lactobacillus plantarum KU5 in the presence or absence of 5% molasses and ensiled for 7, 14, and 28 d. As an alternative storage method, GS was co-ensiled with wet citrus pulp (CP) at different proportions (GS:CP: 70:30, 60:40, 50:50, and 40:60). Analysis was made on physicochemical, fermentative, and nutritional parameters. RESULTS: The GS was found to be a biomass which is difficult to ensile. A combination of microbial inoculant and molasses was successful in the improvement of the silage fermentation quality of GS. Co-ensiling of GS with wet CP at the mixing ratio of 50:50 provided the most desirable silage fermentation parameters, including the substantial lactic acid formation, low final pH, minor effluent loss, and the more favorable organoleptic properties. CONCLUSION: Co-ensiling GS with CP appears to be a simple and viable method of conservation, enabling the more efficient utilization of these by-product resources over a prolonged period.

Vitamin D increases glucocorticoid efficacy via inhibition of mTORC1 in experimental models of multiple sclerosis.

The limited efficacy of glucocorticoids (GCs) during therapy of acute relapses in multiple sclerosis (MS) leads to long-term disability. We investigated the potential of vitamin D (VD) to enhance GC efficacy and the mechanisms underlying this VD/GC interaction. In vitro, GC receptor (GR) expression levels were quantified by ELISA and induction of T cell apoptosis served as a functional readout to assess synergistic 1,25(OH)2D3 (1,25D)/GC effects. Experimental autoimmune encephalomyelitis (MOG35-55 EAE) was induced in mice with T cell-specific GR or mTORc1 deficiency. 25(OH)D (25D) levels were determined in two independent cohorts of MS patients with stable disease or relapses either responsive or resistant to GC treatment (initial cohort: n = 110; validation cohort: n = 85). Gene expression of human CD8+ T cells was analyzed by microarray (n = 112) and correlated with 25D serum levels. In vitro, 1,25D upregulated GR protein levels, leading to increased GC-induced T cell apoptosis. 1,25D/GC combination therapy ameliorated clinical EAE course more efficiently than respective monotherapies, which was dependent on GR expression in T cells. In MS patients from two independent cohorts, 25D deficiency was associated with GC-resistant relapses. Mechanistic studies revealed that synergistic 1,25D/GC effects on apoptosis induction were mediated by the mTOR but not JNK pathway. In line, 1,25D inhibited mTORc1 activity in murine T cells, and low 25D levels in humans were associated with a reduced expression of mTORc1 inhibiting tuberous sclerosis complex 1 in CD8+ T cells. GR upregulation by 1,25D and 1,25D/GC synergism in vitro and therapeutic efficacy in vivo were abolished in animals with a T cell-specific mTORc1 deficiency. Specific inhibition of mTORc1 by everolimus increased the efficacy of GC in EAE. 1,25D augments GC-mediated effects in vitro and in vivo in a T cell-specific, GR-dependent manner via mTORc1 inhibition. These data may have implications for improvement of anti-inflammatory GC therapy.

Mn(VO3)2 Nanorods: Its Green Synthesis and Photocatalytic Properties with the Aid of Polysorbate as the Polymeric Capping Agent.

The aim of the present study is to develop a simple and convenient co-precipitation method to synthesize Mn(VO3)2 nanorods with the aid of polysorbate as the polymeric capping agent in an aqueous environment. The energy-dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, diffuse reflectance spectroscopy, and vibrating-sample magnetometer techniques were applied to characterize chemical structure, morphology, and optical properties of nanorods. According to the XRD and SEM results, various polysorbate has direct impact on the morphology and crystal size. The photocatalytic performance of the synthesized Mn(VO3)2 nanorods was evaluated by monitoring the photodegradation of methylene blue under UV light irradiation. Moreover, the influences of various parameters, such as nanorods size, various dyes, and reaction pH on the photocatalytic stability were studied.

A nanocomposite prepared from reduced graphene oxide, gold nanoparticles and poly(2-amino-5-mercapto-1,3,4-thiadiazole) for use in an electrochemical sensor for doxorubicin.

A nanocomposite was prepared with reduced graphene oxide, gold nanoparticles and an electropolymerized film made from 2-amino-5-mercapto-1,3,4-thiadiazole. An electrochemical sensor for doxorubicin (DOX) was constructed by modifying a glassy carbon electrode (GCE) with the nanocomposite. The modified GCE was studied by electrochemical techniques which showed it to enable highly sensitive sensing of DOX. Response (typically measured at a typical working potential of -0.56 V vs. Ag/AgCl) is linear in the 30 pM to 30 nM and 30 nM to 30 µM DOX concentration ranges, with a limit of detection (LOD) of 9 pM (at an S/N ratio of 3). The method was applied to the determination of DOX in serum and gave recoveries that ranged between 92 and 108%. Graphical abstract A combination of materials consisting of reduced graphene oxide (rGO), gold nanoparticles (AuNPs) and an electropolymerized film of 2-amino-5-mercapto-1,3,4-thiadiazole (poly-AMT, PAMT) is described. The nanocomposite was placed on a glassy carbon elkectrode (GCE) in order to fabricate an electrochemical sensor for doxorubicin (DOX).

Electrochemical determination of the antipsychotic medication clozapine by a carbon paste electrode modified with a nanostructure prepared from titania nanoparticles and copper oxide.

A nanostructure was prepared from titania nanoparticles and copper oxide (TiO2NP@CuO) and used to modify a carbon paste electrode (CPE). The modified CPE is shown to enable sensitive voltammetric determination of the drug clozapine (CLZ). The sensor was characterized by various techniques and some key parameters were optimized. Under the optimum conditions and at a working potential of 0.6 V (vs. Ag/AgCl), the modified CPE has two linear response ranges, one from 30 pmol L-1 to 4 nmol L-1 of CLZ, the other from 4 nmol L-1 to 10 µmol L-1. The detection limit is as low as 9 pM. The transfer coefficient (α) and catalytic rate constant (kcat) were calculated and the reliability of the sensor was estimated for CLZ sensing in real samples where it gave satisfactory results. Graphical abstract Applicability of the TiO2NP@CuO nanostructures in fabrication of an efficient clozapine (CLZ) sensor based on the use of a carbon paste electrode.

Comparison of 3D-printed and laboratory-fabricated Hyrax on stress distribution and displacement of the maxillary complex: a 3D finite element study.

OBJECTIVE: To analyze and compare the effects of a traditional laboratory-fabricated Hyrax expander (T-Hyrax) and two different 3D-printed Hyrax expander models relative to tension points, force distribution, and areas of concentration in the craniofacial complex during maxillary expansion using finite element analysis. MATERIALS AND METHODS: Three maxillary expanders with similar designs, but various alloys were modeled: a T-Hyrax, a fully printed Hyrax (F-Hyrax), and a hybrid printed Hyrax (H-Hyrax). The stress distributions and magnitude of displacements were assessed with a 5 mm expansion in a symmetrical finite element model. The areas of interest included the teeth, alveolar processes, midpalatal suture, nasal complex, circummaxillary sutures (CS), and the expanders themselves. RESULTS: The highest stress value (29.2 MPa) was found at the midpalatal suture of the F-Hyrax, while the lowest stress (0.90 MPa) was found at the temporozygomatic suture in the T-Hyrax. On average, the F-Hyrax increased stress at the CS by 24.76% compared with the T-Hyrax and H-Hyrax. The largest displacements were found at the upper incisor (U1) and anterior nasal spine (ANS). The findings indicated an average increase of 12.80% displacement at the CS using the F-Hyrax compared to the T-Hyrax. CONCLUSION: The F-Hyrax exerts more stress and displacement on the maxilla than both the T-Hyrax and H-Hyrax, where the weak link appears to be the solder joint.

Comparison of phenolic composition in Australian-grown date fruit (Phoenix dactylifera L.) seeds from different varieties and ripening stages.

In this research, different seeds of Australian-grown date palm (Phoenix dactylifera L.) were studied to evaluate the antioxidant potential and analyze their phenolic constituents. Phenolic compounds were extracted from seeds of various Australian-grown date varieties at different ripening stages. Eight varieties of date seeds (Zahidi, Medjool, Deglet nour, Thoory, Halawi, Barhee, Khadrawy, and Bau Strami) at three ripening stages (Kimri, Khalal, and Tamar) were investigated in this study. Date seeds at Khalal (9.87-16.93 mg GAE/g) and Tamar (9.20-27.87 mg GAE/g) stages showed higher total phenolic content than those at Kimri stage (1.81-5.99 mg GAE/g). For antioxidant assays like DPPH, FRAP, ABTS, RAP, FICA, and TAC, date seeds at Khalal and Tamar stages also showed higher antioxidant potential than Kimri stage. However, date seeds at Kimri stage (55.24-63.26 mg TE/g) expressed higher radical scavenging activity than Khalal (13.58-51.88 mg TE/g) and Tamar (11.06-50.92 mg TE/g) stages. Phenolic compounds were characterized using LC-ESI-QTOF-MS/MS, revealing the presence of 37 different phenolic compounds, including 8 phenolic acids, 18 flavonoids, and 11 other phenolic compounds. Further, phenolic compounds were quantified using LC-DAD, revealing that Zahidi variety of date seeds exhibited the highest content during the Kimri stage. In contrast, during the Khalal and Tamar stages, Deglet nour and Medjool date seeds displayed higher concentrations of phenolic compounds. The results indicated an increase in phenolic content in date seeds after the Kimri stage, with significant variations observed among different date varieties.

Application of near-infrared spectroscopy for hay evaluation at different degrees of sample preparation.

OBJECTIVE: A study was conducted to quantify the performance differences of the nearinfrared spectroscopy (NIRS) calibration models developed with different degrees of hay sample preparations. METHODS: A total of 227 imported alfalfa (Medicago sativa L.) and another 360 imported timothy (Phleum pratense L.) hay samples were used to develop calibration models for nutrient value parameters such as moisture, neutral detergent fiber, acid detergent fiber, crude protein, and in vitro dry matter digestibility. Spectral data of hay samples prepared by milling into 1-mm particle size or unground were separately regressed against the wet chemistry results of the abovementioned parameters. RESULTS: The performance of the developed NIRS calibration models was evaluated based on R2, standard error, and ratio percentage deviation (RPD). The models developed with ground hay were more robust and accurate than those with unground hay based on calibration model performance indexes such as R2 (coefficient of determination), standard error, and RPD. Although the R2 of calibration models was mainly greater than 0.90 across the feed value indexes, the R2 of cross-validations was much lower. The R2 of cross-validation varies depending on feed value indexes, which ranged from 0.61 to 0.81 in alfalfa, and from 0.62 to 0.95 in timothy. Estimation of feed values in imported hay can be achievable by the calibrated NIRS. However, the NIRS calibration models must be improved by including a broader range of imported hay samples in the modeling. CONCLUSION: Although the analysis accuracy of NIRS was substantially higher when calibration models were developed with ground samples, less sample preparation will be more advantageous for achieving rapid delivery of hay sample analysis results. Therefore, further research warrants investigating the level of sample preparations compromising analysis accuracy by NIRS.

Effects of Dietary Fiber Level and Forage Particle Size on Growth, Nutrient Digestion, Ruminal Fermentation, and Behavior of Weaned Holstein Calves under Heat Stress.

This experiment was designed to investigate the effects of feeding diets with different fiber content and forage particle size on the performance, health, nutrient digestion, rumen fermentation, and behavioral and sorting activity of Holstein dairy calves kept under elevated environmental temperature. Sixty weaned Holstein female calves (age = 96.7 ± 7.62 days old; body weight = 82.4 ± 10.4 kg) were randomly assigned to one of 4 treatments arranged in a 2-by-2 factorial design in a 70-day experiment. Dietary forage content (moderate, 22.5%; or high, 40.0% on DM basis) and alfalfa hay particle size (short, 4.39 mm; or long, 7.22 mm as geometric mean) were the experimental factors, resulting in the following combinations: (1) high-fiber (HF) diets with forage-to-concentrate ratio of 40:60 and long particle-sized alfalfa hay (LPS; HF-LPS); (2) HF diets with short particle-sized alfalfa hay (SPS; HF-SPS); (3) moderate-fiber (MF) diets with forage-to-concentrate ratio of 22.5:77.5 with LPS (MF-LPS); and (4) MF diets with SPS (MF-SPS). The temperature-humidity index averaged 73.0 ± 1.86, indicating that weaned calves experienced a moderate extent of heat stress. Fiber level and AH particle size interacted and affected dry matter intake, with the greatest intake (4.83 kg/d) observed in MF-SPS-fed calves. Final body weight was greater in calves receiving MF vs. HF diets (164 vs. 152 kg; p < 0.01). Respiration rate decreased when SPS vs. LPS AH was included in HF but not MF diet. Lower rectal temperature was recorded in calves fed MF vs. HF diet. Digestibility of dry matter and crude protein was greater in calves fed MF than HF diets, resulting in lower ruminal pH (6.12 vs. 6.30; p = 0.03). Fiber digestibility was greater in calves fed SPS compared with those fed LPS alfalfa hay. Feeding HF compared with MF diet increased acetate but lowered propionate molar proportions. The inclusion of SPS vs. LPS alfalfa hay decreased lying time in HF diet (920 vs. 861 min; p < 0.01). Calves fed MF vs. HF diets spent less time eating but more time lying, which is likely indicative of better animal comfort. Dietary fiber level and forage particle size interacted and affected sorting against 19 mm particles, the extent of which was greater in HF-SPS diet. Overall, dietary fiber level had a stronger effect than forage particle size on the performance of weaned calves exposed to a moderate degree of heat stress as feeding MF vs. HF diet resulted in greater feed intake, final body weight, structural growth measures, nutrient digestion, as well as longer lying behavior. The inclusion of SPS alfalfa hay in MF diets increased feed consumption.

Explainable Deep Learning and Biomechanical Modeling for TMJ Disorder Morphological Risk Factors.

Clarifying multifactorial musculoskeletal disorder etiologies supports risk analysis and development of targeted prevention and treatment modalities. Deep learning enables comprehensive risk factor identification through systematic analysis of disease datasets but does not provide sufficient context for mechanistic understanding, limiting clinical applicability for etiological investigations. Conversely, multiscale biomechanical modeling can evaluate mechanistic etiology within the relevant biomechanical and physiological context. We propose a hybrid approach combining 3D explainable deep learning and multiscale biomechanical modeling; we applied this approach to investigate temporomandibular joint (TMJ) disorder etiology by systematically identifying risk factors and elucidating mechanistic relationships between risk factors and TMJ biomechanics and mechanobiology. Our 3D convolutional neural network recognized TMJ disorder patients through subject-specific morphological features in condylar, ramus, and chin. Driven by deep learning model outputs, biomechanical modeling revealed that small mandibular size and flat condylar shape were associated with increased TMJ disorder risk through increased joint force, decreased tissue nutrient availability and cell ATP production, and increased TMJ disc strain energy density. Combining explainable deep learning and multiscale biomechanical modeling addresses the "mechanism unknown" limitation undermining translational confidence in clinical applications of deep learning and increases methodological accessibility for smaller clinical datasets by providing the crucial biomechanical context.

Short-term oxidative lime pretreatment of palm pruning waste for use as animal feedstuff.

BACKGROUND: Oxidative lime pretreatment (OLP) is an effective pretreatment for highly recalcitrant lignocellulosic materials. This experiment was conducted to investigate the effect of short-term OLP on fermentative gas production kinetics of date palm prunings. Rachis and petiole were pretreated with excess lime (0.5 g Ca(OH)2 g(-1) dry matter) in a reactor charged with 10 bar pure oxygen pressure at different times and temperatures. RESULTS: Lignin removal was greatly affected by OLP, whereas cellulose was well preserved even after severe pretreatment. After 72 h fermentation, the cumulative gas production was 321.2 mL gas g(-1) organic matter (OM) for the most severe pretreatment, compared to 73.6 mL g(-1) OM for the untreated rachis. For the petiole pretreated at 120 °C for 280 min, 268 mL gas was produced compared to 59 mL gas g(-1) OM for the untreated petiole. Scanning electron microscope images showed the formation of pores (average diameter of 10-12 µm) and carbonate calcium deposits on the surface of treated biomass. An increase in biomass crystallinity was observed in pretreated samples resulting from cellulose enrichment. CONCLUSIONS: The results suggest that OLP improves the ruminal digestibility of date palm prunings, which may have potential for inclusion in the ruminant diet at low cost.

Synthesis of Mn-ofloxacin complex, experimental and in silico DNA binding evaluation, biological activity assessment.

Metal-fluoroquinolones have more antibacterial and cytotoxic effects compared to free fluoroquinolones. In this work, a bidentated Mn (II) complex with ofloxacin (MOC) was synthesized and its cytotoxicity activity, oxidative stress and DNA binding were studied. Anti- proliferative and cytotoxic tests revealed that MOC exhibits better anti proliferative and cytotoxic activities compared to OFL which was attributed to the more interaction of MOC with DNA. Therefore, the interaction of MOC with DNA was investigated by using voltammetry, UV-Vis, fluorescence, and in silico methods. The results revealed that MOC interacts with DNA via electrostatic and outside hydrogen binding via minor groove. The proposed DNA binding modes may support the greater in-vitro cytotoxicity of MOC compared to OFL alone.

Applicability of a Green Nanocomposite Consisted of Spongin Decorated Cu2WO4(OH)2 and AgNPs as a High-Performance Aptasensing Platform in Staphylococcus aureus Detection.

This study reports the synthesis of a nanocomposite consisting of spongin and its applicability in the development of an aptasensing platform with high performance. The spongin was carefully extracted from a marine sponge and decorated with copper tungsten oxide hydroxide. The resulting spongin-copper tungsten oxide hydroxide was functionalized by silver nanoparticles and utilized in electrochemical aptasensor fabrication. The nanocomposite covered on a glassy carbon electrode surface amplified the electron transfer and increased active electrochemical sites. The aptasensor was fabricated by loading of thiolated aptamer on the embedded surface via thiol-AgNPs linkage. The applicability of the aptasensor was tested in detecting the Staphylococcus aureus bacterium as one of the five most common causes of nosocomial infectious diseases. The aptasensor measured S. aureus under a linear concentration range of 10-108 colony-forming units per milliliter and a limit of quantification and detection of 12 and 1 colony-forming unit per milliliter, respectively. The highly selective diagnosis of S. aureus in the presence of some common bacterial strains was satisfactorily evaluated. The acceptable results of the human serum analysis as the real sample may be promising in the bacteria tracking in clinical samples underlying the green chemistry principle.

Effects of sodium diacetate and microbial inoculants on fermentation of forage rye.

Rye (Secale cereale L.) is a valuable annual forage crop in Korea but there is limited information about the impact of chemical and biological additives on fermentation characteristics of the crop. This experiment was conducted to investigate fermentation dynamics of wilted forage rye treated with the following six additives; control (no additive), sodium diacetate applied at 3 g/kg wilted forage weight (SDA3), 6 g/kg wilted forage weight (SDA6), inoculations (106 CFU/g wilted forage) of Lactobacillus plantarum (LP), L. buchneri (LB), or LP+LB. The ensiled rye sampled at 1, 2, 3, 5, 10, 20, 30, and 45 days indicated that the acidification occurred fast within five days of storage than the rest of the storage period. The microbial inoculants decline the pH of ensiled forage, more rapidly than the control or SDA treated, which accompanied by the decrease of water-soluble carbohydrates and increase of lactic acid. Compared with the control silage, all treatments suppressed ammonia-nitrogen formation below to 35 g/kg DM throughout the sampling period. Suppression of total microbial counting occurred in SDA6, LP, and LP + LB. The lactic acid production rates were generally higher in microbial inoculation treatments. Acetic acid concentration was lowest in the LP-treated silage and highest in the SDA- and LB-treated silages. The in vitro dry matter (DM) digestibility and total digestible nutrients were the highest in the silage treated with SDA (6 g/kg) at day 45 of ensiling. Based on lower ammonia-nitrogen concentrations and higher feed value, ensiling forage rye treated with SDA at 6 g/kg is promising through enhanced silage quality.

Development of ternary H-point standard addition method for simultaneous analysis of curcuminoids by differential pulse voltammetry.

Turmeric (Curcuma longa L.) rhizome is one of the most famous plants that has been widely used in food, medicine, and industry. Its quality deeply depends on the presence of curcuminoids and their ratios. As their structures are very similar to each other, this work reported simple, accurate, fast, and sensitive method based on developed ternary H-point standard for differential pulse voltammetry (t-HPSAM-DPV). For electrochemical determination of three analytes in the sample, three standards were added simultaneously. This method was developed for detection of three curcuminoids including curcumin (CU), desmethoxycurcumin (DMC), and bisdemethoxycurcumin (BDMC) in real samples. The precision of method has RSD% < 5.5 % and the accuracy of proposed method has relative error lower than 7.0 %. Also, intra and inter-day precisions have provided the mean RSD% < 4.50. The LOD values were obtained for CU, DMC and BDMC are 0.6 × 10-6, 0.57 × 10-6 and 0.42 × 10-6, respectively. Compared with other reported HPLC methods, the results revealed a reasonable accurate precision for proposed method. Under optimized experimental conditions, t-HPSMA significantly resolved overlapping of DPV peaks of CU, DMC, and BDMC. This method can be successfully used for ternary analysis of analytes using one standard addition to the real samples.