Electroanalytical profiling of cocaine samples by means of an electropolymerized molecularly imprinted polymer using benzocaine as the template molecule.

The analysis of 'cutting' or additive agents in cocaine, like benzocaine (BZC), allows police analysts to identify each component of the sample, thus obtaining information like the drugs' provenience. This kind of drug profiling is of great value in tackling drug trafficking. Electropolymerized molecularly imprinted polymers (e-MIPs) on portable screen-printed carbon electrodes (SPCEs) were developed in this study for BZC determination. The MIPs' electropolymerization was performed on a carbon surface using the anaesthetic BZC as the template molecule and 3-amino-4-hydroxybenzoic acid (3,4-AHBA) as the functional monomer. The build-up of this biomimetic sensor was carefully characterized by cyclic voltammetry (CV) and optimized. Cyclic voltammetric investigation demonstrated that BZC oxidation had a complex and pH-dependent mechanism, but at pH 7.4 a single, well-defined oxidation feature was observed. The BZC-MIP interactions were studied by computer-aided theoretical modeling by means of density functional theory (DFT) calculations. The electroanalytical methodology was effectively applied to artificial urine samples; BZC molecular recognition was achieved with a low limit of detection (LOD) of 2.9 nmol L-1 employing square-wave voltammetry (SWV). The e-MIPs were then used to 'fingerprint' genuine cocaine samples, assisted by principal component analysis (PCA), at the central forensic laboratory of the Brazilian Federal Police (BFP) with a portable potentiostat. This electroanalysis provided proof-of-concept that the drugs could be voltammetrically 'fingerprinted' using e-MIPs supported by chemometric analysis.

Kamlet-Taft solvent parameters, NMR spectroscopic analysis and thermoelectrochemistry of lithium-glyme solvate ionic liquids and their dilute solutions.

Solvate ionic liquids are a relatively new class of liquids produced by combining a coordinating solvent with a salt. They have a variety of uses and their suitability for such depends upon the ratio of salt to coordinating solvent. This work investigates the Kamlet-Taft solvent parameters of, NMR chemical shifts of nuclei in, and thermoelectrochemistry of a selected set of solvate ionic liquids produced from glymes (methyl terminated oligomers of ethylene glycol) and lithium bis(trifluoromethylsulfonyl)imide at two different compositions. The aim is to improve the understanding of the interactions occurring in these ionic liquids to help select suitable solvate ionic liquids for future applications.

Cleavage of ethers in an ionic liquid. Enhancement, selectivity and potential application.

The cleavage of a series of ethers was examined in an ionic liquid containing hydrogen bromide. Reactions that did not proceed in either water or DMSO were found to proceed readily in this system, with notable selectivity between the cleavage of the different ether types examined herein. Increasing the proportion of water in the reaction mixture dramatically decreased the rate constant of ether cleavage; this could, in part, be attributed to a decrease in the solvent stabilisation of the transition state. Through analysis of the electronic requirements of the reaction (using substrates containing substituents with different Hammett parameters) and observation of rate enhancements for an ortho substituted system, the importance of the extent of protonation of the ether prior to nucleophilic attack was demonstrated.

Enhancing thermoelectrochemical properties by tethering ferrocene to the anion or cation of ionic liquids: altered thermodynamics and solubility.

Entropic changes inherent within a redox process typically result in significant temperature sensitivity. This can be utilised positively or can be a detrimental process. This study has investigated the thermoelectrochemical properties (temperature-dependant electrochemistry) of the ferrocenium|ferrocene redox couple in an ionic liquid, and in particular the effect of covalently tethering this redox couple to fixed positive or negative charges. As such, the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide was employed to dissolve ferrocene, as well as cationic-tethered ferrocene (the 1-ethyl-3-(methylferrocenyl)imidazolium cation) and anionic-tethered ferrocene (the ferrocenylsulfonyl(trifluoromethylsulfonyl)imide anion). These systems were characterised in terms of their voltammetry (apparent formal potentials, diffusion coefficients and electron transfer rate constants) and thermoelectrochemistry (temperature coefficients of the cell potential or 'Seebeck coefficients', short circuit current densities and power density outputs). The oxidised cationic species behaved like a dicationic species and was thus 6-fold more effective at converting waste thermal energy to electrical power within a thermoelectrochemical cell than unmodified ferrocene. This was almost exclusively due to a significant boost in the Seebeck coefficient of this redox couple. Conversely, the oxidised anionic species was formally a zwitterion, but this zwitterionic species behaved thermodynamically like a neutral species. The inverted entropic change upon going from ferrocene to anion-tethered ferrocene allowed development of a largely temperature-insensitive reference potential based upon a mixture of acetylferrocene and ferricenyl(iii)sulfonyl(trifluoromethylsulfonyl)imide.

The thermoelectrochemistry of lithium-glyme solvate ionic liquids: towards waste heat harvesting.

Thermoelectrochemistry offers a simple, scalable technique for direct conversion of waste heat into useful electricity. Here the thermoelectrochemical properties of lithium-glyme solvate ionic liquids, as well as their dilute electrolyte analogues, have been investigated using mixtures of tetraglyme (G4, tetraethylene glycol dimethyl ether) and lithium bis(trifluoromethylsulfonyl)imide (Li[NTf2]). The thermoelectrochemical process is entropically-driven by release of the glyme from the lithium-glyme complex cation, due to electrodeposition of lithium metal at the hotter lithium electrode with concomitant electrodissolution at the cooler lithium electrode. The optimum ratio for thermochemical electricity generation is not the solvate ionic liquid (equimolar mixture of Li[NTf2] and glyme), but rather one Li[NTf2] to four G4, due to the mixtures relatively high ionic conductivity and good apparent Seebeck coefficient (+1.4 mV K(-1)). Determination of the lithium-glyme mixture thermal conductivity enabled full assessment of the Figure of Merit (ZT), and the efficiency relative to the Carnot efficiency to be determined. As the lithium electrodeposits are porous, alternating the temperature gradient results in a system that actually improves with repeated use.

The electrochemistry of quinizarin revealed through its mediated reduction of oxygen.

After 35 years the hunt for improved anthracycline antibiotics is unabated but has yet to achieve the levels of clinical success desired. Electrochemical techniques provide a large amount of kinetic and thermodynamic information, but the use of such procedures is hindered by issues of sensitivity and selectivity. This work demonstrates how by harnessing the mechanism of catalytic reduction of oxygen by the quinone functionality present within the anthracycline structure it is possible to study the reactive moiety in nanomolar concentration. This methodology allows electrochemical investigation of the intercalation of quinizarin into DNA and, in particular, the quinone oxidation and degradation mechanism. The reversible reduction of the quinizarin, which in the presence of oxygen leads to the formation of reactive oxygen species, is found to occur at -0.535 V (vs. SCE) pH 6.84 and the irreversible oxidation leading to the molecules degradation occurs at +0.386 V (vs. SCE) pH 6.84.

Self-assembled monolayers for electrostatic electrocatalysis and enhanced electrode stability in thermogalvanic cells.

Waste heat is ubiquitous; as such, sustainable and long-lasting devices are required to convert it into more useful forms of energy that can make use of this abundant potential resource. Thermogalvanic cells (or thermocells) can use the thermoelectrochemical properties of redox couples to achieve this; entropy-driven redox reactions allow them to act as liquid thermoelectrics. However, excellent electrocatalysis at the electrode surface is required for optimum conversion efficiency. Serendipitous observation of Nafion-based electrocatalysis prompted the exploration of electrostatically charged self-assembled monolayers (SAMs) inside a thermocell. Both electrostatic electrocatalysis and improved electrode stability were observed; in an aqueous K3[Fe(CN)6]/K4[Fe(CN)6]-based cell, modification with (3-trimethylammonium bromide)thiopropane resulted in higher electrical power, and protection against [Fe(CN)6]3-/4--induced gold passivation, relative to bare gold. Molecular-based electrostatic electrocatalysis could be an alternative to precious metal-based nanomaterial electrocatalysis, and could be integrated with (nano)carbon-based electrodes to further enhance the ability of thermogalvanic and other electrochemical energy conversion devices, e.g. redox flow batteries.

Re-assessing viologens for modern bio-electrocatalysis.

Viologens, 1,1'-disubstituted-4,4'-bipyridinium salts, are organic redox species that can be used in place of NADPH as mediators for redox enzymes. In this study, using the reduction of oxidized glutathione by glutathione reductase as a model system, a rationally designed library of viologens covering a range of polarities and functional groups were explored as electron transfer mediators for bio-electrocatalysis. Through a series of electrochemical investigations, the reduction potential was found to be the primary determining factor for electron transfer between the viologen and enzyme. Through enhancing the solubility of viologen such that the fully reduced state remained soluble, we demonstrate a much-widened window of useable viologen potentials. In doing so, we describe for the first time a highly efficient electron transfer to a flavoenzyme promoting the catalytic reaction in the absence of co-factors. As such, our study provides a platform for broadening the scope for using viologens as mediating agents for electrochemically-driven enzymatic processes.

High Seebeck coefficient thermogalvanic cells via the solvent-sensitive charge additivity of cobalt 1,8-diaminosarcophagine.

Thermogalvanic devices can chemically convert low grade (<200 °C) waste thermal energy into electrical energy. A temperature gradient across the device drives an entropically favourable electrochemical redox reaction, resulting in continuous current production. The voltage correlates with the entropy change during the redox reaction, which favours high valence metal complexes with high charge densities. Here we investigate cobalt (II/III) sarcophagine ([Co(SAR)]2+/3+) for application in thermogalvanic cells, as a function of solvent; the two uncoordinated amine groups 1,8-diaminosarcophagine are typically protonated to form tetracationic/pentacationic [Co(SARH2)]4+/5+. In water, [Co(SARH2)]4+/5+ gave a thermogalvanic Seebeck coefficient (Se) of +0.43 mV K-1, which is entropically consistent with just the Co2+/3+ core valence, whereas DMSO and ionic liquid solvents gave Se values of +1.84 and +2.04 mV K-1, respectively, in line with the 'Co4+/5+' overall complex. This work proves how the ionic charge on pendant moieties can undergo charge-additivity with the metal core to significantly boost entropically-driven processes, but only in suitably low dielectric and bulky solvents.

One-step synthesis of fluorescein modified nano-carbon for Pd(II) detection via fluorescence quenching.

Carbon black (CB) nanoparticles modified with fluorescein, a highly fluorescent molecule, were prepared using a facile and efficient methodology. Simply stirring CB in aqueous solution containing fluorescein resulted in the strong physisorption of fluorescein onto the CB surface. The resulting Fluorescein/CB was then characterised by means of X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), fluorescence microscopy and fluorescence spectroscopy. The optimum experimental conditions for fluorescence of Fluorescein/CB viz. fluorescence excitation and emission wavelengths, O(2) removal and the amount of Fluorescein/CB used, were investigated. The Fluorescein/CB was used as a fluorescent probe for the sensitive detection of Pd(II) in water, based on fluorescence quenching. The results demonstrated that the fluorescence intensity of Fluorescein/CB decreased with increasing Pd(II) concentration, and the fluorescence quenching process could be described by the Stern-Volmer equation. The limit of detection (LOD) for the fluorescence quenching of Fluorescein/CB by Pd(II) in aqueous solution was found to be 1.07 µM (based on 3σ). Last, approaches were studied for the removal of Fe(III) which interferes with the fluorescence quenching of Fluorescein/CB. Complexation of Fe(III) with salicylic acid was used to enhance and control the selectivity of Fluorescein/CB sensor towards Pd(II) in the presence of Fe(III).

The hydrogen evolution reaction in a room temperature ionic liquid: mechanism and electrocatalyst trends.

The kinetics and mechanism of the proton reduction reaction in the room temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C(2)mim][NTf(2)]) was studied at gold, molybdenum, nickel, titanium and platinum electrodes. Significant differences in electrochemical rate constants were observed between the different metals and with the corresponding processes in aqueous solution. The hydrogen evolution mechanism was consistent at all five metals in the ionic liquid, in stark contrast to the known behaviour in aqueous systems.

The adsorption of quinizarin on boron-doped diamond.

The voltammetric response of the quinone species 'quinizarin' (QZ) and its electrocatalytic reduction of oxygen are studied at a boron doped diamond electrode (BDD). It is demonstrated that, contrary to the widespread belief that adsorption of organic molecules on BDD is minimal, not only does QZ readily adsorb to the electrodes surface but this adsorption is also influenced at low surface coverages by the pre-exposure of the electrode to organic solvents. Furthermore, the nature of this adsorbed QZ species is investigated and a potential dependent phase transition is observed. This is to the authors knowledge the first system to exhibit a phase transition of an adsorbed species on a boron doped diamond surface. At low scan rates the system is found to oscillate; these oscillations are ascribed to the presence of a 'negative differential resistance'.

Direct measurement of the genuine efficiency of thermogalvanic heat-to-electricity conversion in thermocells.

Harvesting wasted thermal energy could make important contributions to global energy sustainability. Thermogalvanic devices are simple, chemistry-based devices which can convert heat to electricity, through facile redox chemistry. The efficiency of this process is the ratio of electrical energy generated by the cell (in Watts) to the quantity of thermal energy that passes through the cell (also in Watts). Prior work estimated the quantity of thermal energy passed through a thermocell by applying a conductive heat transfer model to the electrolyte. Here, we employ a heat flux sensor to unambiguously quantify both heat flux and electrical power. By evaluating the effect of electrode separation, temperature difference and gelation of the electrolyte, we found significant discrepancy between the estimated model and the quantified reality. For electrode separation, the trend between estimated and measured efficiency went in opposite directions; as a function of temperature difference, they demonstrated the same trend, but estimated values were significantly higher. This was due to significant additional convection and radiation contributions to the heat flux. Conversely, gelled electrolytes were able to suppress heat flux mechanisms and achieve experimentally determined efficiency values in excess of the estimated values (at small electrode separations), with partially gelled systems being particularly effective. This study provides the ability to unambiguously benchmark and assess the absolute efficiency and Carnot efficiency of thermogalvanic electrolytes and even the whole thermocell device, allowing 'total device efficiency' to be quantified. The deviation between the routinely applied estimation methodology and actual measurement will support the rational development of novel thermal energy harvesting chemistries, materials and devices.

Towards mixed fuels: the electrochemistry of hydrazine in the presence of methanol and formic acid.

The electrochemistry of formic acid, carbon monoxide and methanol have been investigated and evaluated in combination with hydrazine. Hydrazine was observed to display the anticipated steady-state oxidation waves at platinum (Pt) microelectrodes by cyclic voltammetry, and upon introduction of carbon monoxide (CO) gas, the Pt surface was fully passivated (prior to CO oxidation). However, the two individual responses of hydrazine and formic acid (HCOOH) are to be additive when combined in solution. No detrimental effects were observed upon the hydrazine voltammetry, even in the presence of excess formic acid, despite formic acid clearly displaying characteristic self-poisoning tendencies (primarily due to the formation of CO) in its own voltammetry. Effects intermediate to those of CO and formic acid were observed when methanol was present. Currents were essentially additive at low methanol content, but hydrazine oxidation current decreased by about 40% when an 100-fold excess of methanol was present, corresponding to poisoning by methanol dehydrogenation intermediates. These results are discussed with relevance to mixed fuels for more flexible or powerful fuel cells, and the possible formation of a random microelectrode array (templated by strongly adsorbed poison) on the microelectrode surface.

The kinetics of ferrocene volatilisation from an ionic liquid.

The volatilisation of ferrocene (Fc), dissolved in the ionic liquid N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [C(4)mpyrr][NTf(2)], to the gas phase has been indirectly monitored by cyclic voltammetry and chronoamperometry. Simulation of the observed trends in concentration with time using a simple model allowed quantification of the process. Volatilisation of dissolved Fc under flowing wet and dry dinitrogen gas (N(2)) was found to be kinetically limited with a rate constant in the region of 2×10(-7) cm s(-1). The activation energy of diffusion for Fc was found to be 28.2±0.7 kJ mol(-1), while the activation energy of volatilisation of Fc from [C(4)mpyrr][NTf(2)] to dry N(2) was found to be 85±2 kJ mol(-1).