Blood Lead Levels in the Population Living in Algeria: A Cross-Sectional National Study.

Lead poisoning, is currently recognized as a real public health problem, The WHO classifies lead as one of 10 chemicals of serious public health concern. In Algeria and North Africa, to date, no study on the evaluation of lead impregnation has been carried out at the national level. The main objective of this work is to assess the exposure of the general Algerian population to lead. A cross-sectional study was carried out over the entire Algerian national territory, on a population aged between 3 and 74 years old. The survey lasted three years, A questionnaire, a clinical examination and a blood sample were carried out for each individual. Generalized linear regression models were used to determine the factors influencing lead levels measured in blood samples. The study population, spread over 39 wilayas and 121 districts, consists of 3674 individuals. The mean lead levels were 28.27 µg/L, the median was 22.22 µg/L, and the 95th percentile was 73.83 µg/L, Blood lead levels were influenced differently by age, gender, wilaya of residence, dietary habits such as consumption of canned food and the way in which water is conserved for daily consumption. The use of kohl has been confirmed as a potential source of lead exposure. In Algeria, a blood lead value of 75 µg/L serves as the Reference Exposure Value, guiding public health responses and risk management strategies, Recommendations have been issued to reduce the blood lead levels of the general population in Algeria in terms of limitation of lead in the sources of exposure, installation of an effective health monitoring system.

Optimization and validation of a fast supercritical fluid chromatography tandem mass spectrometry method for the quantitative determination of a large set of PFASs in food matrices and human milk.

An Ultra-High Performance Supercritical Fluid Chromatography coupled with tandem Mass Spectrometry analytical method (UHPSFC-MS/MS) was developed for the determination of 34 perfluoroalkylated substances (PFASs) in food-related matrices. Two parameters (i.e. stationary phase and co-solvent) were selected and optimized using a step-by-step method, while a design of experiment (DoE) method using a central composite design (CCD) was implemented to optimize column temperature, mobile phase flow rate, co-solvent concentration and automated back pressure regulator (ABPR). The Torus 2-PIC column was selected along with ammonium acetate AcoNH4 as additive in the co-solvent. DoE optimization of both peak width and resolution enabled validating an optimized model (desirability 0.613) and setting column temperature at 38.7 °C, AcoNH4 concentration at 8 mM, mobile phase flow rate of 1.9 mL/min and ABPR at 1654 psi. The validated resulting method enabled reaching limits of quantification below 0.2 ng/g (w.w.) for 97 % PFASs in accordance with current EU requirements. The strategy was successfully applied to the characterization of a range (n > 30) of food-related matrices (red meat, poultry meat, eggs, fish and breast milk) collected in Algeria in 2019. PFOA and PFBA were observed as the most frequently detected PFASs, i.e. in 96.96 % and 90.9 % of the samples respectively. The highest concentrations were determined in fishery products up to 4.42 ng/g (w.w.) for PFTeDA and 0.75 ng/g (w.w.) for PFOS.

Laser ultrasonics detection of an embedded crack in a composite spherical particle.

Laser ultrasonics was applied to the manufacturing control of the integrity (no failure) of coated spherical particles designed for High Temperature Reactors (HTR). This control is of major importance, since the coating of the nuclear fuel kernel is designed to prevent from the diffusion of fission products outside the particle during reactor operation. The SiC layer composing the coating is particularly important, since this layer must be an impenetrable barrier for fission products. The integrity of the SiC shell (no crack within the shell) can be assessed by the ultrasonic vibration spectrum of the HTR particle, which is significantly changed, compared to the reference spectrum of a defect-free particle. Spheroidal vibration modes of defect-free dummy particles with a zirconium dioxide (ZrO(2)) core were observed in the 2-5MHz range. A theoretical analysis is presented to account for the observed vibration spectra of defect-free or cracked HTR particles.