Anatomic Study on Sphenoidal Emissary Foramen by Using Cone-Beam Computed Tomography.

OBJECTIVES: The goal of this retrospective study is to evaluate the radiologic anatomy of sphenoidal emissary foramen (SEF) by using cone-beam computed tomography (CBCT) scans. METHODS: Three hundred seventeen (189 female and 128 male) full-head CBCT images were evaluated in this study. Incidence, diameter, shape, confluence to foramen ovale, and distance to anatomic structures of SEF were noted. RESULTS: In the 317 analyzed images, the SEF was identified in 89 (28.1%) images. Of these, 67 (21.1%) were unilateral, 22 were (6.9%) bilateral. The maximum mean diameter of SEF was measured 2.66 mm on the right side and 2.82 mm on the left side (P = 0.16). The most observed SEF shape was oval with the incidence of 68.5% (P ≤ 0.05). Confluence was observed in 23.4% of SEF whereof 84.6% were in the left side (P ≤ 0.05). CONCLUSION: Observations in this study tender new anatomic parameters regarding SEF incidence, characteristics, and distances to proximate anatomic structures. Knowledge related to SEF variations will be helpful for neurosurgeons and radiologist.

Evaluation of Anatomical and Volumetric Characteristics of the Nasopalatine Canal in Anterior Dentate and Edentulous Individuals: A CBCT Study.

OBJECTIVE: To examine the nasopalatine canal (NPC) anatomical and volumetric measurements in anterior edentulous (AE) and anterior dentate (AD) individuals and to compare these findings according to sex, age, shape, and severity of resorption in the premaxilla. METHODS: Two hundred cone beam computed tomography images were divided into 2 groups: AE and AD. The diameter, the length of the NPC and the width, the length of the buccal bone anterior to the NPC were measured and recorded. Linear and volumetric measurement results were evaluated in terms of age, sex, dental status, shape, and severity of resorption. RESULTS: No significant differences were observed between the AE and AD groups in terms of the NPC volume (P = 0.289). In the AE group, the spindle shape had the highest volume, and in the same group, with aging, the volume significantly increased (P = 0.00). The mean NPC volume was found to be statistically significantly larger in males than females (P = 0.02). A statistically significant relation was observed between NPC volume and resorption status. CONCLUSION: Severe bone resorption due to sustained edentation complicated implant surgery because of the increase in incisive and nasal foramen diameters and decrease in buccal residual bone dimensions. The NPC volume was found fewer in edentulous patients, and by the resorption, the volume was decreased.

The effect of game-based learning on basic life support skills training for undergraduate dental students.

OBJECTIVES: The aim of this study was to investigate the impact of serious game training on the performance of undergraduate dental students during basic life support (BLS) training. METHODS: Students at the Ankara University Faculty of Dentistry were divided into two groups at random: Serious Game (SG) (n = 46) and Traditional (Tr) (n = 45). Students completed the BLS pre-test following their lecture-based training. The SG set of students practiced until they achieved an 85 on the BLS Platform, after which they completed the BLS post-test. All students practiced cardiopulmonary resuscitation (CPR) on a manikin with the instructor's guidance, and then they independently applied CPR by using the model training component. The module evaluation scale was then used to determine each student's grade. Finally, the students provided input on surveys regarding technology perceptions of SG training, serious gaming, and hands-on training. RESULTS: In the SG group, the BLS post-test scores were significantly higher than the pre-test results (p = 0.00). In the SG and Tr groups, there was no statistically significant difference in the overall hands-on training scores (p = 0.11). Students in both groups evaluated the hands-on training on the manikin favorably and with high levels of participation. CONCLUSIONS: The SG-based training platform for BLS training has enhanced the BLS performance of undergraduate dental students in terms of knowledge and skill. It has been shown that digital learners have a beneficial impact on game-based learning outcomes; it is advised to use SGs and develop new games for various learning objectives.

Assessing the reliability of CBCT-based AI-generated STL files in diagnosing osseous changes of the mandibular condyle: a comparative study with ground truth diagnosis.

OBJECTIVES: This study aims to evaluate the reliability of AI-generated STL files in diagnosing osseous changes of the mandibular condyle and compare them to a ground truth (GT) diagnosis made by six radiologists. METHODS: A total of 432 retrospective CBCT images from four universities were evaluated by six dentomaxillofacial radiologists who identified osseous changes such as flattening, erosion, osteophyte formation, bifid condyle formation, and osteosclerosis. All images were evaluated by each radiologist blindly and recorded on a spreadsheet. All evaluations were compared and for the disagreements, a consensus meeting was held online to create a uniform GT diagnosis spreadsheet. A web-based dental AI software was used to generate STL files of the CBCT images, which were then evaluated by two dentomaxillofacial radiologists. The new observer, GT, was compared to this new STL file evaluation, and the interclass correlation (ICC) value was calculated for each pathology. RESULTS: Out of the 864 condyles assessed, the ground truth diagnosis identified 372 cases of flattening, 185 cases of erosion, 70 cases of osteophyte formation, 117 cases of osteosclerosis, and 15 cases of bifid condyle formation. The ICC values for flattening, erosion, osteophyte formation, osteosclerosis, and bifid condyle formation were 1.000, 0.782, 1.000, 0.000, and 1.000, respectively, when comparing diagnoses made using STL files with the ground truth. CONCLUSIONS: AI-generated STL files are reliable in diagnosing bifid condyle formation, osteophyte formation, and flattening of the condyle. However, the diagnosis of osteosclerosis using AI-generated STL files is not reliable, and the accuracy of diagnosis is affected by the erosion grade.

Evaluation of a metal artifact reduction algorithm and an adaptive image noise optimization filter in the estimation of peri-implant fenestration defects using cone beam computed tomography: an in-vitro study.

OBJECTIVE: The aim of this study is to assess the effects of metal artifact reduction (MAR) and adaptive image noise enhancer (AINO) in CBCT imaging on the detection accuracy of artificially created fenestration defects in proximity to titanium and zirconium implants in sheep jaw. METHODS: Six zirconium and 10 titanium implants were planted on mandibular jaws of three sheep, and artificial defects were created. All images were obtained with a standard voxel size (0.150 mm3) and with 4 scan modes: (1) without MAR/without AINO; (2) with MAR/without AINO; (3) without MAR/with AINO; and (4) with MAR/with AINO during CBCT scanning. A total of 60 CBCT scans were produced. RESULTS: For all types of implants, intra- and inter-observer kappa values were the highest for MAR filter. The scan mode of with MAR filter was found to have the highest area under the curve (AUC), whereas the scan mode of without both MAR and AINO filters was found to have the lowest AUC values with statistical significance (p ≤ 0.05). Titanium implants were found to have higher AUC values than zirconium (p ≤ 0.05). CONCLUSION: Both MAR module and AINO filters enhance the accuracy of the detection of peri-implant fenestrations; however, the use of MAR filter solely can be recommended for detection of peri-implant fenestrations.

Use of canonical variate analysis biplot in examination of choline content data of some foods.

Adequate intake (AI) of choline as part of the daily diet can help prevent major diseases. Low choline intake is a major risk factor for liver and several neurological disorders. Extreme choline consumption may cause diseases such as hypotension, sweating, diarrhea, and fishy body odor. The AI of choline is 425 mg/day for adult women; higher for pregnant and lactating women. The AI for adult men is 550 mg/day. The total choline content of foods is calculated as the sum of free choline, glycerophosphocholine, phosphocholine, phosphatidylcholine and sphingomyelin. These are called the choline variables. Observed values of choline variables may be different in amounts of nutrients. So different food groups in terms of choline variables are useful to compare. The present paper shows the advantages of using canonical variate analysis biplot to optimally separate groups and explore the differentiality of choline variables amounts in foods.

Determination of alveolar bone height according to the relationship between molar teeth and maxillary sinus.

PURPOSE: This study aims to analyze alveolar bone height (ABH) in the maxillary molar area according to the anatomical relationship between maxillary sinus and maxillary molar teeth via cone beam computed tomography images. METHODS: In 330 patients, 660 maxillary first molar (M1) and 648 maxillary second molar (M2) were evaluated. ABH measurements were made as to the shortest distance between the furcation midpoints of maxillary molars and the lowest point of the sinus floor. After the measurement, the positions of the maxillary molar teeth relative to the maxillary sinus were classified into four categories as type 1, 2, 3, and 4. RESULTS: ABH measurements in males were significantly higher than females (p < 0.05), but there were no differences between sides (p > 0.05). There were significant differences between types of both M1 and M2 for ABH, and the longest ABH was measured in type 1 (p < 0.05). Type 3 was the most common among 1308 maxillary molars teeth followed by type 1, type 2, and type 4. CONCLUSION: Determination of the relationship between maxillary molar teeth and the maxillary sinus and analysis of ABH according to this relationship may help plan endodontic treatment, apical surgery, and immediate implant therapy and prevent their complications.

Evaluation of the detectability of early mandible fracture healing findings in terms of vitality aspect by using micro-CT technology in postmortem interval.

The purpose of the present study was to investigate the vitality aspect of mandibular fractures using micro-CT in the analysis of bone mineral density and other bone microstructure trabecular parameters in the postmortem interval. This study included 72 female Wistar rats. In the study groups, the rats' mandibles were first fractured and after three days of living, the rats were sacrificed. In the control groups, the rats were sacrificed first and then the mandibles were fractured. All rats were left for a natural putrefaction period according to their group's time as week-0, week-1, week-2, week-4, week-8, and week-12. All fractured hemi-mandibles were scanned by micro-CT and analyzed in terms of BMD and other bone trabecular microstructures. BMD and the other bone trabecular microstructures, such as bone volume, percent bone volume, trabecular separation, and trabecular pattern factor, showed statistically significant differences in both the study and control groups (p ≤ 0.05). There were statistically significant differences between the study and control groups in comparisons of BMD in groups 1, 2, 3, 4 and 5, bone volume and percent bone volume in groups 1 and 3, bone surface and bone surface density in group 6, trabecular separation in group 1, and trabecular number, trabecular pattern factor, and structural model index in group 6. Micro-CT scanning and analysis of BMD and other bone trabecular microstructure parameters for evaluation of vitality aspects of mandible fractures in the PMI has various valuable results that should provide guidance for possible studies in the future.

Comparison of the different voxel sizes in the estimation of peri-implant fenestration defects using cone beam computed tomography: an ex vivo study.

BACKGROUND: To examine the influence of voxel sizes to detect of peri-implant fenestration defects on cone beam computed tomography (CBCT) images. MATERIALS AND METHODS: This study performed with three sheep heads both maxilla and mandible and two types of dental implant type 1 zirconium implant (Zr40) (n = 6) and type 2 titanium implant (Ti22) (n = 10). A total of 14 peri-implant fenestrations (8 buccal surfaces, 6 palatal/lingual surface) were created while 18 surfaces (8 buccal, 10 palatal/lingual) were free of fenestrations. Three observers have evaluated the images of fenestration at each site. Images obtained with 0.75 mm3, 0.100 mm3, 0.150 mm3, 0.200 mm3, and 0.400 mm3 voxel sizes. For intra- and inter-observer agreements for each voxel size, Kappa coefficients were calculated. RESULTS: Intra- and inter-observer kappa values were the highest for 0.150 mm3, and the lowest in 0.75 mm3 and 0.400 mm3 voxel sizes for all types of implants. The highest area under the curve (AUC) values were found higher for the scan mode of 0.150 mm3, whereas lower AUC values were found for the voxel size for 0.400 mm3. Titanium implants had higher AUC values than zirconium with the statistical significance for all voxel sizes (p ≤ 0.05). CONCLUSION: A voxel size of 0.150 mm3 can be used to detect peri-implant fenestration bone defects. CBCT is the most reliable diagnostic tool for peri-implant fenestration bone defects.

Evaluation of a metal artifact reduction algorithm and an optimization filter in the estimation of peri-implant dehiscence defects by using cone beam computed tomography: an in-vitro study.

OBJECTIVES: The aim of this study was to assess the effect of a metal artifact reduction (MAR) algorithm and the adaptive image noise optimizer (AINO) optimization filter in the detection of peri-implant dehiscences with cone beam computed tomography (CBCT). STUDY DESIGN: Nine implants (3 zirconium, 3 titanium, and 3 zirconium-titanium) were placed in 3 sheep heads. Dehiscences were created on the buccal and lingual/palatal surfaces. A total of 9 defects and 9 controls with no defects were evaluated by 3 observers. Each sheep head was scanned 5 times with 4 scan modes; (1) without MAR/without AINO; (2) with MAR/without AINO; (3) without MAR/with AINO; and (4) with MAR/with AINO. Receiver operating characteristic analysis and weighted kappa coefficients were used to calculate diagnostic efficacy and intra- and interobserver agreements for each implant type and scan mode. RESULTS: For all implant types, dehiscences were most accurately detected when both MAR and AINO were applied (P ≤ .045). Detection of dehiscences was more accurate with titanium implants (P ≤ .040). There were no significant differences in agreement among and between the observers. CONCLUSIONS: The use of both MAR and AINO enhanced the detection accuracy of artificially created dehiscences in proximity to implants. Their combined use is recommended for detecting peri-implant dehiscences.