Tailoring of energetic groups in acroyloyl polymers.

Acryloyl based novel energetic monomers having nitro acrylates and nitro triazole acrylates were synthesized and further used for polymerization. Due to scavanging properties of nitro groups, syntheses of nitro aromatic polymers are not facile at normal conditions. In this regard, we report a simple protocol to synthesize these energetic group embeded acroloyl polymers. These polymers were characterized by FTIR, and NMR spectroscopic techniques. gel permeation chromatography (GPC) technique was employed in order to understand molecular mass of these polymers along with average molecular weight, number average weight and poly dispersity index. Glass transition temperature (Tg) was determined by using DSC analysis. It was observed that with increase in nitro groups in polymers there is a decrease in glass transition temperature. Two steps degradation were depicted in the TGA thermograph in nitro containing polymers. Heat release during this reaction was found up to 951 J/g. Increase in nitrogen content in polymer unit enhanced the heat release of polymers.

Regiospecifically Fluorinated Polycyclic Aromatic Hydrocarbons via Julia-Kocienski Olefination and Oxidative Photocyclization. Effect of Fluorine Atom Substitution on Molecular Shape.

A modular synthesis of regiospecifically fluorinated polycyclic aromatic hydrocarbons (PAHs) is described. 1,2-Diarylfluoroalkenes, synthesized via Julia-Kocienski olefination (70-99% yields), were converted to isomeric 5- and 6-fluorobenzo[c]phenanthrene, 5-and 6-fluorochrysene, and 9- and 10-benzo[g]chrysene (66-83% yields) by oxidative photocyclization. Photocyclization to 6-fluorochrysene proceeded more slowly than conversion of 1-styrylnaphthalene to chrysene. Higher fluoroalkene dilution led to a more rapid cyclization. Therefore, photocyclizations were performed at higher dilutions. To evaluate the effect of fluorine atom on molecular shapes, X-ray data for 5- and 6-fluorobenzo[c]phenanthrene, 6-fluorochrysene, 9- and 10-fluorobenzo[g]chrysene, and unfluorinated chrysene as well as benzo[g]chrysene were obtained and compared. The fluorine atom caused a small deviation from planarity in the chrysene series and decreased nonplanarity in the benzo[c]phenanthrene derivatives, but its influence was most pronounced in the benzo[g]chrysene series. A remarkable flattening of the molecule was observed in 9-fluorobenzo[g]chrysene, where the short 2.055 Å interatomic distance between bay-region F-9 and H-8, downfield shift of H-8, and a 26.1 Hz coupling between F-9 and C-8 indicate a possible F-9···H-8 hydrogen bond. In addition, in 9-fluorobenzo[g]chrysene, the stacking distance is short at 3.365 Å and there is an additional interaction between the C-11-H and C-10a of a nearby molecule that is almost perpendicular.

Understanding metastable phase transformation during crystallization of RDX, HMX and CL-20: experimental and DFT studies.

Multiphase growth during crystallization severely affects deliverable output of explosive materials. Appearance and incomplete transformation of metastable phases are a major source of polymorphic impurities. This article presents a methodical and molecular level understanding of the metastable phase transformation mechanism during crystallization of cyclic nitramine explosives, viz. RDX, HMX and CL-20. Instantaneous reverse precipitation yielded metastable γ-HMX and ß-CL-20 which undergo solution mediated transformation to the respective thermodynamic forms, ß-HMX and ε-CL-20, following 'Ostwald's rule of stages'. However, no metastable phase, anticipated as ß-RDX, was evidenced during precipitation of RDX, which rather directly yielded the thermodynamically stable α-phase. The γ→ß-HMX and ß→ε-CL-20 transformations took 20 and 60 minutes respectively, whereas formation of α-RDX was instantaneous. Density functional calculations were employed to identify the possible transition state conformations and to obtain activation barriers for transformations at wB97XD/6-311++G(d,p)(IEFPCM)//B3LYP/6-311G(d,p) level of theory. The computed activation barriers and lattice energies responsible for transformation of RDX, HMX and CL-20 metastable phases to thermodynamic ones conspicuously supported the experimentally observed order of phase stability. This precise result facilitated an understanding of the occurrence of a relatively more sensitive and less dense ß-CL-20 phase in TNT based melt-cast explosive compositions, a persistent and critical problem unanswered in the literature. The crystalline material recovered from such compositions revealed a mixture of ß- and ε-CL-20. However, similar compositions of RDX and HMX never showed any metastable phase. The relatively long stability with the highest activation barrier is believed to restrict complete ß→ε-CL-20 transformation during processing. Therefore a method is suggested to overcome this issue.

Pd-catalyzed regioselective arylation on the C-5 position of N-aryl 1,2,3-triazoles.

We herein report a highly efficient method for the arylation at the C-5 position of N-aryl 1,2,3-triazoles via a direct palladium catalyzed arylation reaction. The optimal reaction conditions required a combination of Pd(OAc)2 and tris(o-tolyl)phosphine as catalyst, and Cs2CO3 as the base under inert atmosphere. A variety of C-5 substituted N-aryl 1,2,3-triazoles were prepared using these conditions with yields in the 70-88% range. Regioselective C-5 arylations were also performed on 1,4-disubstituted 1,2,3-triazoles. The regioselectivity in triazole substitution at the C-5 position was confirmed by single crystal XRD. In addition, computational investigations of key steps of the catalytic cycle using the density functional theory have provided a rationalization to the selective C-5 arylation of N-aryl 1,2,3-triazoles.

Recent applications of ring-rearrangement metathesis in organic synthesis.

Ring-rearrangement metathesis (RRM) involves multiple metathesis processes such as ring-opening metathesis (ROM)/ring-closing metathesis (RCM) in a one-pot operation to generate complex targets. RRM delivers complex frameworks that are difficult to assemble by conventional methods. The noteworthy point about this type of protocol is multi-bond formation and it is an atom economic process. In this review, we have covered literature that appeared during the last seven years (2008-2014).

Synthesis of regiospecifically fluorinated conjugated dienamides.

Modular synthesis of regiospecifically fluorinated 2,4-diene Weinreb amides, with defined stereochemistry at both double bonds, was achieved via two sequential Julia-Kocienski olefinations. In the first step, a Z-a-fluorovinyl Weinreb amide unit with a benzothiazolylsulfanyl substituent at the allylic position was assembled. This was achieved via condensation of two primary building blocks, namely 2-(benzo[d]thiazol-2-ylsulfonyl)-2-fluoro-N-methoxy-N-methylacetamide (a Julia-Kocienski olefination reagent) and 2-(benzo[d]thiazol-2-ylthio)acetaldehyde (a bifunctional building block). This condensation was highly Z-selective and proceeded in a good 76% yield. Oxidation of benzothiazolylsulfanyl moiety furnished a second-generation Julia-Kocienski olefination reagent, which was used for the introduction of the second olefinic linkage via DBU-mediated condensations with aldehydes, to give (2Z,4E/Z)-dienamides in 50%-74% yield. Although olefinations were 4Z-selective, (2Z,4E/Z)-2-fluoro-2,4-dienamides could be readily isomerized to the corresponding 5-substituted (2Z,4E)-2-fluoro-N-methoxy-N-methylpenta-2,4-dienamides in the presence of catalytic iodine.

Diverse role, structural trends, and applications of fluorinated sulphonamide compounds in agrochemical and pharmaceutical fields.

Our knowledge of fluorine's unique and complex properties has significantly increased over the past 20 years. Consequently, more sophisticated and innovative techniques have emerged to incorporate this feature into the design of potential drug candidates. In recent years, researchers have become interested in synthesizing fluoro-sulphonamide compounds to discover new chemical entities with distinct and unexpected physical, chemical, and biological characteristics. The fluorinated sulphonamide molecules have shown significant biomedical importance. Their potential is not limited to biomedical applications but also includes crop protection. The discovery of novel fluorine and Sulfur compounds has highlighted their importance in the chemical sector, particularly in the agrochemical and medicinal fields. Recently, several fluorinated sulphonamide derivatives have been developed and frequently used by agriculturalists to produce food for the growing global population. These molecules have also exhibited their potential in health by inhibiting various human diseases. In today's world, it is crucial to have a steady supply of innovative pharmaceutical and agrochemical molecules that are highly effective, less harmful to the environment, and affordable. This review summarizes the available information on the activity of Fluorine and Sulphonamide compounds, which have proven active in pharmaceuticals and agrochemicals with excellent environmental and human health approaches. Moreover, it focuses on the current literature on the chemical structures, the application of fluorinated sulphonamide compounds against various pathological conditions, and their effectiveness in crop protection.

Sono-chemical synthesis of ZnO nano-particles and their application in hydrogen sulphide gas sensing.

Herein we describe synthesis of ZnO nanoparticles by using alkaline solution of ZnX2 (X = NO3, Cl) under ultrasound energy of 20 KHz. The reaction can be completed in about 1-2 hours. As prepared powders were analyzed by XRD measurement to find that the product is hexagonal phase pure ZnO. UV-Visible measurement of aq. solution showed absorption band at -365 nm and photoluminescence (PL) indicated multiple bands in visible region due to deep traps owing to high temperature sintering. The hydrophilicity can be imparted by use of a suitable polyelectrolyte. Freshly prepared samples showed good dispersion in aqueous and alcoholic medium. The thick films derived from the ZnO nano-particles showed excellent sensing for hydrogen sulphide gas.

A DFT approach towards understanding the thermal stability of TKX-50 and their key precursors through band gaps and MESP.

TKX-50 (dihydroxylammonium 5,5'-bistetrazolate-1,1'-dioxide) is a recent time invention by Klapotke et. al. in the field of high energy materials, and it outperforms all the existing materials by means of performance parameters. It is rising as potential energetic material due to favorable thermal insensitivity, low toxicity and safe handling. The decomposition temperature (Tmax) values of precursors such as glyoxime (I), 1,2-dichloroglyoxime (II), 1,2-diazidoglyoxime (III), and bistetrazoledihydroxide (IV) and ending products TKX-50 (V) and ABTOX (VI) have been attempted to correlate with the results obtained from molecular electrostatic potentials and band gaps calculated from the difference of ionization potential and electron affinity. The molecular electrostatic potential values of azido attached -NO group of III are much less than that of hydro/chloro attached -NO group of I/II and that of tetrazole groups IV, V, and VI. The band gaps calculated from stability trend in the increasing order of III < II < I < IV < V < VI are well corroborated with stability trend drawn from experimentally determined decomposition temperatures. Further, employing conceptual density functional theory (DFT) molecular descriptors, band gap values were calculated via the difference of ionization potential and electron affinity to understand the thermal stability of TKX-50, ABTOX, and its precursors.

Alpha-fluorovinyl Weinreb amides and alpha-fluoroenones from a common fluorinated building block.

Synthesis and reactivity of N-methoxy-N-methyl-(1,3-benzothiazol-2-ylsulfonyl)fluoroacetamide, a building block for Julia olefination, is reported. This reagent undergoes condensation reactions with aldehydes and cyclic ketones to give alpha-fluorovinyl Weinreb amides. Olefination reactions proceed under mild, DBU-mediated conditions, or in the presence of NaH. DBU-mediated condensations proceed with either E- or Z-selectivity, depending upon reaction conditions, whereas NaH-mediated reactions are > or = 98% Z-stereoselective. Conversion of the Weinreb amide moiety in N-methoxy-N-methyl-(1,3-benzothiazol-2-ylsulfanyl)fluoroacetamide to ketones, followed by oxidation, resulted in another set of olefination reagents, namely (1,3-benzothiazol-2-ylsulfonyl)fluoromethyl phenyl and propyl ketones. In the presence of DBU, these compounds react with aldehydes tested to give alpha-fluoroenones with high Z-selectivity. The use of N-methoxy-N-methyl-(1,3-benzothiazol-2-ylsulfanyl)fluoroacetamide as a common fluorinated intermediate in the synthesis of alpha-fluorovinyl Weinreb amides and alpha-fluoroenones has been demonstrated. Application of the Weinreb amide to alpha-fluoro allyl amine synthesis is also shown.

Retro Diels-Alder reaction under mild conditions: experimental and theoretical studies.

We describe experimental as well as theoretical results to support the role of cyclopropane in a retro Diels-Alder reaction at lower temperature.